Surface EMG signal - Feature Extraction

Welcome to 3D-printed Myo electric prosthetic hand Project. In this project we will build a bionic arm which can be controlled using myo electric sensors.

Designing, building and controlling a motorized prosthetic arm

Body powered prosthetic hand mechanisms are actuated by human body movement through wires or cables and their goal is to substitute the human hand more esthetically than functionally.

Obsoleted: OpenArms project with Research and Development.

This sketch was made to be used in conjunction with the Mirru Arduino Sketch

This sketch was made to be used in conjunction with the Mirru Android App

OpenArms Project for Low-cost & Mass-supply

Implementation and benchmarking of machine learning methods for identifying hand motions from EEG recordings.

Open-source bionic arm broject

Analyze data from surface EMG sensors, accelerometer, and gyroscope to recognize several hand-motion patterns, which can then be associated with a specific pattern in the 3D printed prosthetic arm 💪🏼

Prosthetic Hand Project

Prosthetic Hand Project

A prosthetic arm which uses servos to create tension in strings, mimicking the movement of human tendons to enable realistic finger motion.

Wirelessly controlled InMoov robotic hand via DIY flex sensors

Mechatronics Engineering Project

Central Control Circuit

University project developing a novel low-cost prosthetic hand

Bachelor's Thesis

A bionic prosthesis controlled through DIY muscle sensors attached to an Arduino board