Merge branch 'feature/ble_example' into 'feature/esp_as_mcu_host'

feature/ble_example See merge request app-frameworks/esp_hosted!497
espressif · Sep 9, 2024 · ed6195d · ed6195d
2 parents 1c568c9 + 0de6579
commit ed6195d
Show file tree

Hide file tree

Showing 10 changed files with 1,146 additions and 1 deletion.
diff --git a/examples/bleprph_host_only_vhci/CMakeLists.txt b/examples/bleprph_host_only_vhci/CMakeLists.txt
@@ -0,0 +1,6 @@
+# The following lines of boilerplate have to be in your project's
+# CMakeLists in this exact order for cmake to work correctly
+cmake_minimum_required(VERSION 3.16)
+
+include($ENV{IDF_PATH}/tools/cmake/project.cmake)
+project(bleprph_host_only_vhci)
diff --git a/examples/bleprph_host_only_vhci/README.md b/examples/bleprph_host_only_vhci/README.md
@@ -0,0 +1,202 @@
+| Supported Targets | ESP32 | ESP32-C2 | ESP32-C3 | ESP32-C5 | ESP32-C6 | ESP32-H2 | ESP32-S3 | ESP32-P4 |
+| ----------------- | ----- | -------- | -------- | -------- | -------- | -------- | -------- | -------- |
+
+# BLE Host-Only Peripheral VHCI Example
+
+This example uses the Bluetooth VHCI transport provided by ESP-Hosted.
+
+To use the VHCI transport in the application, the Bluetooth controller
+should be disabled and the default uart-transport should also be
+disabled (when the controller is disabled, by default the
+uart-transport is selected). The Bluetooth VHCI transport in
+ESP-Hosted should also be enabled.
+
+Refer to the `sdkconfig.defaults` file which has the required
+configuration.
+
+To test this demo, any BLE scanner app can be used.
+
+## How to Use This Example
+
+Before project configuration and build, be sure to set the correct
+chip target using:
+
+```bash
+idf.py set-target <chip_name>
+```
+
+### Configure the project
+
+Open the project configuration menu:
+
+```bash
+idf.py menuconfig
+```
+
+In the `Component config-> Bluetooth` menu:
+
+* Select `controller` to Disabled.
+* Disable `Nimble Options-> Host-controller Transport -> Enable Uart Transport`.
+
+In the `Component config-> ESP-Hosted config` menu:
+
+* Enable `Bluetooth Support-> Enable Hosted Bluetooth support`
+
+### Build and Flash
+
+Run `idf.py -p PORT flash monitor` to build, flash and monitor the
+project.
+
+(To exit the serial monitor, type ``Ctrl-]``.)
+
+See the [Getting Started Guide](https://idf.espressif.com/) for full
+steps to configure and use ESP-IDF to build projects.
+
+## Example Output
+
+This is the console output when `bleprph_host_only_vhci` is running on
+the ESP32-P4 and using the Bluetooth Controller of the ESP32C6 on the
+ESP32-P4-Function-EV-Board. The data is transferred through SDIO
+between the ESP32-P4 and ESP32-C6:
+
+```
+I (25) boot: ESP-IDF v5.4-dev-2793-g24047f9a04-dirty 2nd stage bootloader
+I (26) boot: compile time Sep  9 2024 16:23:48
+I (27) boot: Multicore bootloader
+I (32) boot: chip revision: v0.1
+I (34) boot: efuse block revision: v0.0
+I (39) boot.esp32p4: SPI Speed      : 80MHz
+I (44) boot.esp32p4: SPI Mode       : DIO
+I (49) boot.esp32p4: SPI Flash Size : 2MB
+I (53) boot: Enabling RNG early entropy source...
+I (59) boot: Partition Table:
+I (62) boot: ## Label            Usage          Type ST Offset   Length
+I (70) boot:  0 nvs              WiFi data        01 02 00009000 00006000
+I (77) boot:  1 phy_init         RF data          01 01 0000f000 00001000
+I (84) boot:  2 factory          factory app      00 00 00010000 00100000
+I (93) boot: End of partition table
+I (96) esp_image: segment 0: paddr=00010020 vaddr=40070020 size=2ae08h (175624) map
+I (135) esp_image: segment 1: paddr=0003ae30 vaddr=30100000 size=0000ch (    12) load
+I (137) esp_image: segment 2: paddr=0003ae44 vaddr=3010000c size=00038h (    56) load
+I (142) esp_image: segment 3: paddr=0003ae84 vaddr=4ff00000 size=05194h ( 20884) load
+I (154) esp_image: segment 4: paddr=00040020 vaddr=40000020 size=638b0h (407728) map
+I (226) esp_image: segment 5: paddr=000a38d8 vaddr=4ff05194 size=0b9a0h ( 47520) load
+I (237) esp_image: segment 6: paddr=000af280 vaddr=4ff10b80 size=02328h (  9000) load
+I (244) boot: Loaded app from partition at offset 0x10000
+I (244) boot: Disabling RNG early entropy source...
+I (258) cpu_start: Multicore app
+W (267) clk: esp_perip_clk_init() has not been implemented yet
+I (274) cpu_start: Pro cpu start user code
+I (274) cpu_start: cpu freq: 360000000 Hz
+I (274) app_init: Application information:
+I (277) app_init: Project name:     bleprph_host_only_vhci
+I (283) app_init: App version:      1c568c9-dirty
+I (288) app_init: Compile time:     Sep  9 2024 16:23:43
+I (294) app_init: ELF file SHA256:  ee5a16527...
+I (299) app_init: ESP-IDF:          v5.4-dev-2793-g24047f9a04-dirty
+I (306) efuse_init: Min chip rev:     v0.1
+I (311) efuse_init: Max chip rev:     v0.99
+I (316) efuse_init: Chip rev:         v0.1
+I (321) heap_init: Initializing. RAM available for dynamic allocation:
+I (328) heap_init: At 4FF160B0 len 00024F10 (147 KiB): RAM
+I (334) heap_init: At 4FF3AFC0 len 00004BF0 (18 KiB): RAM
+I (340) heap_init: At 4FF40000 len 00060000 (384 KiB): RAM
+I (347) heap_init: At 50108080 len 00007F80 (31 KiB): RTCRAM
+I (353) heap_init: At 30100044 len 00001FBC (7 KiB): TCM
+I (360) spi_flash: detected chip: generic
+I (363) spi_flash: flash io: dio
+W (367) spi_flash: Detected size(16384k) larger than the size in the binary image header(2048k). Using the size in the binary image header.
+I (381) host_init: ESP Hosted : Host chip_ip[18]
+I (409) H_API: ESP-Hosted starting. Hosted_Tasks: prio:23, stack: 5120 RPC_task_stack: 5120
+sdio_mempool_create free:181028 min-free:181028 lfb-def:139264 lfb-8bit:139264
+
+I (414) gpio: GPIO[18]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
+I (423) gpio: GPIO[19]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
+I (433) gpio: GPIO[14]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
+I (442) gpio: GPIO[15]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
+I (451) gpio: GPIO[16]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
+I (461) gpio: GPIO[17]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
+I (470) H_API: ** add_esp_wifi_remote_channels **
+I (475) transport: Add ESP-Hosted channel IF[1]: S[0] Tx[0x4000d110] Rx[0x4001b4aa]
+0x4000d110: transport_drv_sta_tx at /home/kysoh/projects/esp_as_mcu_host/examples/bleprph_host_only_vhci/components/esp_hosted/host/drivers/transport/transport_drv.c:208
+0x4001b4aa: esp_wifi_remote_channel_rx at /home/kysoh/projects/esp_as_mcu_host/examples/bleprph_host_only_vhci/managed_components/espressif__esp_wifi_remote/esp_wifi_remote_net.c:19
+
+I (484) transport: Add ESP-Hosted channel IF[2]: S[0] Tx[0x4000d058] Rx[0x4001b4aa]
+0x4000d058: transport_drv_ap_tx at /home/kysoh/projects/esp_as_mcu_host/examples/bleprph_host_only_vhci/components/esp_hosted/host/drivers/transport/transport_drv.c:238
+0x4001b4aa: esp_wifi_remote_channel_rx at /home/kysoh/projects/esp_as_mcu_host/examples/bleprph_host_only_vhci/managed_components/espressif__esp_wifi_remote/esp_wifi_remote_net.c:19
+
+I (493) main_task: Started on CPU0
+I (503) main_task: Calling app_main()
+I (513) transport: Attempt connection with slave: retry[0]
+I (513) transport: Reset slave using GPIO[54]
+I (513) os_wrapper_esp: GPIO [54] configured
+I (513) gpio: GPIO[54]| InputEn: 0| OutputEn: 1| OpenDrain: 0| Pullup: 0| Pulldown: 0| Intr:0
+I (1693) sdio_wrapper: SDIO master: Data-Lines: 4-bit Freq(KHz)[40000 KHz]
+I (1693) sdio_wrapper: GPIOs: CLK[18] CMD[19] D0[14] D1[15] D2[16] D3[17] Slave_Reset[54]
+I (1693) H_SDIO_DRV: Starting SDIO process rx task
+I (1693) sdio_wrapper: Queues: Tx[20] Rx[20] SDIO-Rx-Mode[1]
+I (1733) gpio: GPIO[15]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
+I (1733) gpio: GPIO[17]| InputEn: 0| OutputEn: 0| OpenDrain: 0| Pullup: 1| Pulldown: 0| Intr:0
+Name:
+Type: SDIO
+Speed: 40.00 MHz (limit: 40.00 MHz)
+Size: 0MB
+CSD: ver=1, sector_size=0, capacity=0 read_bl_len=0
+SCR: sd_spec=0, bus_width=0
+TUPLE: DEVICE, size: 3: D9 01 FF
+TUPLE: MANFID, size: 4
+  MANF: 0092, CARD: 6666
+TUPLE: FUNCID, size: 2: 0C 00
+TUPLE: FUNCE, size: 4: 00 00 02 32
+TUPLE: CONFIG, size: 5: 01 01 00 02 07
+TUPLE: CFTABLE_ENTRY, size: 8
+  INDX: C1, Intface: 1, Default: 1, Conf-Entry-Num: 1
+  IF: 41
+  FS: 30, misc: 0, mem_space: 1, irq: 1, io_space: 0, timing: 0, power: 0
+  IR: 30, mask: 1,   IRQ: FF FF
+  LEN: FFFF
+TUPLE: END
+I (1783) sdio_wrapper: Function 0 Blocksize: 512
+I (1793) sdio_wrapper: Function 1 Blocksize: 512
+I (1793) H_SDIO_DRV: SDIO Host operating in STREAMING MODE
+I (1803) H_SDIO_DRV: generate slave intr
+I (1813) transport: Received INIT event from ESP32 peripheral
+I (1813) transport: EVENT: 12
+I (1813) transport: EVENT: 11
+I (1823) transport: capabilities: 0xd
+I (1823) transport: Features supported are:
+I (1833) transport:      * WLAN
+I (1833) transport:        - HCI over SDIO
+I (1843) transport:        - BLE only
+I (1843) transport: EVENT: 13
+I (1843) transport: ESP board type is : 13
+
+I (1853) transport: Base transport is set-up
+
+I (1853) transport: Slave chip Id[12]
+I (1863) vhci_drv: Host BT Support: Enabled
+I (1863) vhci_drv:      BT Transport Type: VHCI
+I (1873) H_SDIO_DRV: Received INIT event
+I (1883) rpc_wrap: Received Slave ESP Init
+I (2623) NimBLE_BLE_PRPH: BLE Host Task Started
+I (2623) uart: queue free spaces: 8
+I (2623) main_task: Returned from app_main()
+I (2623) NimBLE: GAP procedure initiated: stop advertising.
+
+I (2633) NimBLE: Device Address:
+I (2633) NimBLE: 40:4c:ca:5b:9a:e2
+I (2633) NimBLE:
+
+I (2643) NimBLE: GAP procedure initiated: advertise;
+I (2643) NimBLE: disc_mode=2
+I (2653) NimBLE:  adv_channel_map=0 own_addr_type=0 adv_filter_policy=0 adv_itvl_min=0 adv_itvl_max=0
+I (2663) NimBLE:
+```
+
+## Troubleshooting
+
+For any technical queries, please open an [issue](https://github.com/espressif/esp-hosted/issues) on ESP-Hosted on GitHub. We will get back to you soon.
+
+## References
+
+* Bluetooth Implementation in ESP-Hosted: https://github.com/espressif/esp-hosted/blob/feature/esp_as_mcu_host/docs/bluetooth_implementation.md
diff --git a/examples/bleprph_host_only_vhci/main/CMakeLists.txt b/examples/bleprph_host_only_vhci/main/CMakeLists.txt
@@ -0,0 +1,5 @@
+set(srcs "main.c"
+         "gatt_svr.c")
+
+idf_component_register(SRCS "${srcs}"
+                       INCLUDE_DIRS ".")
diff --git a/examples/bleprph_host_only_vhci/main/Kconfig.projbuild b/examples/bleprph_host_only_vhci/main/Kconfig.projbuild
@@ -0,0 +1,80 @@
+menu "Example Configuration"
+
+    choice EXAMPLE_USE_IO_TYPE
+        prompt "I/O Capability"
+        default BLE_SM_IO_CAP_NO_IO
+        help
+            I/O capability of device.
+
+        config BLE_SM_IO_CAP_DISP_ONLY
+            bool "DISPLAY ONLY"
+        config BLE_SM_IO_CAP_DISP_YES_NO
+            bool "DISPLAY YESNO"
+        config BLE_SM_IO_CAP_KEYBOARD_ONLY
+            bool "KEYBOARD ONLY"
+        config BLE_SM_IO_CAP_NO_IO
+            bool "Just works"
+        config BLE_SM_IO_CAP_KEYBOARD_DISP
+            bool "Both KEYBOARD & DISPLAY"
+    endchoice
+
+    config EXAMPLE_IO_TYPE
+        int
+        default 0 if BLE_SM_IO_CAP_DISP_ONLY
+        default 1 if BLE_SM_IO_CAP_DISP_YES_NO
+        default 2 if BLE_SM_IO_CAP_KEYBOARD_ONLY
+        default 3 if BLE_SM_IO_CAP_NO_IO
+        default 4 if BLE_SM_IO_CAP_KEYBOARD_DISP
+
+    config EXAMPLE_BONDING
+        bool
+        default n
+        prompt "Use Bonding"
+        help
+            Use this option to enable/disable bonding.
+
+    config EXAMPLE_MITM
+        bool
+        default n
+        prompt "MITM security"
+        help
+            Use this option to enable/disable MITM security.
+
+    config EXAMPLE_USE_SC
+        bool
+        depends on BT_NIMBLE_SM_SC
+        default n
+        prompt "Use Secure Connection feature"
+        help
+            Use this option to enable/disable Security Manager Secure Connection 4.2 feature.
+
+    config EXAMPLE_EXTENDED_ADV
+        bool
+        depends on SOC_BLE_50_SUPPORTED && BT_NIMBLE_50_FEATURE_SUPPORT
+        default y if SOC_ESP_NIMBLE_CONTROLLER
+        select BT_NIMBLE_EXT_ADV
+        prompt "Enable Extended Adv"
+        help
+            Use this option to enable extended advertising in the example.
+            If this option is disabled, ensure config BT_NIMBLE_EXT_ADV is
+            also disabled from Nimble stack menuconfig
+
+    config EXAMPLE_RANDOM_ADDR
+        bool
+        prompt "Advertise RANDOM Address"
+        help
+            Use this option to advertise a random address instead of public address
+
+    config EXAMPLE_ENCRYPTION
+        bool
+        prompt "Enable Link Encryption"
+        help
+            This adds Encrypted Read and Write permissions in the custom GATT server.
+
+    config EXAMPLE_RESOLVE_PEER_ADDR
+        bool
+        prompt "Enable resolving peer address"
+        help
+            Use this option to enable resolving peer's address.
+
+endmenu
diff --git a/examples/bleprph_host_only_vhci/main/bleprph.h b/examples/bleprph_host_only_vhci/main/bleprph.h
@@ -0,0 +1,35 @@
+/*
+ * SPDX-FileCopyrightText: 2015-2024 Espressif Systems (Shanghai) CO LTD
+ *
+ * SPDX-License-Identifier: Apache-2.0
+ */
+#ifndef H_BLEPRPH_
+#define H_BLEPRPH_
+
+#include <stdbool.h>
+#include "nimble/ble.h"
+#include "modlog/modlog.h"
+#include "esp_peripheral.h"
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+struct ble_hs_cfg;
+struct ble_gatt_register_ctxt;
+
+/** GATT server. */
+#define GATT_SVR_SVC_ALERT_UUID               0x1811
+#define GATT_SVR_CHR_SUP_NEW_ALERT_CAT_UUID   0x2A47
+#define GATT_SVR_CHR_NEW_ALERT                0x2A46
+#define GATT_SVR_CHR_SUP_UNR_ALERT_CAT_UUID   0x2A48
+#define GATT_SVR_CHR_UNR_ALERT_STAT_UUID      0x2A45
+#define GATT_SVR_CHR_ALERT_NOT_CTRL_PT        0x2A44
+
+void gatt_svr_register_cb(struct ble_gatt_register_ctxt *ctxt, void *arg);
+int gatt_svr_init(void);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif