Update new keyboard templates

README.md

@@ -147,11 +147,11 @@ Run `zmk keyboard list` to print a list of supported keyboard hardware.
 
 If ZMK doesn't support your keyboard yet, you can run `zmk keyboard new` to create a new keyboard from a template.
 
-This won't walk you through all of the details of adding support for a new keyboard, but it will generate most of the boilerplate for you. See the [New Keyboard Shield](https://zmk.dev/docs/development/new-shield) guide for how to finish writing the keyboard files.
+This won't walk you through all of the details of adding support for a new keyboard, but it will generate most of the boilerplate for you. See the [New Keyboard Shield](https://zmk.dev/docs/development/hardware-integration/new-shield) guide for how to finish writing the keyboard files.
 
 ## Module Management
 
-[Zephyr modules](https://docs.zephyrproject.org/3.6.0/develop/modules.html) can add support for new keyboards, behaviors, and other features to ZMK. Use the `zmk module` command to install modules into your repo:
+[Zephyr modules](https://docs.zephyrproject.org/3.5.0/develop/modules.html) can add support for new keyboards, behaviors, and other features to ZMK. Use the `zmk module` command to install modules into your repo:
 
 ```sh
 zmk module add     # Add a module

zmk/commands/keyboard/new.py

@@ -197,7 +197,9 @@ def keyboard_new(
     rich.print(
         "Open this folder and edit the files to finish setting up the new keyboard."
     )
-    rich.print("See https://zmk.dev/docs/development/new-shield for help.")
+    rich.print(
+        "See https://zmk.dev/docs/development/hardware-integration/new-shield for help."
+    )
 
 
 def _prompt_keyboard_type():

zmk/templates/board/nrf52840/Kconfig

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#write-kconfig-files
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#write-kconfig-files
 # for more information.
 
 if ${self.guard() | trim}

zmk/templates/board/nrf52840/Kconfig.defconfig

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#write-kconfig-files
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#write-kconfig-files
 # for more information.
 
 <%block name="before" />

zmk/templates/board/nrf52840/board.yaml

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/develop/test/twister.html#board-configuration
+# See https://docs.zephyrproject.org/3.5.0/develop/test/twister.html#board-configuration
 # for more information.
 
 identifier: ${id}

zmk/templates/board/nrf52840/board_defconfig

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#write-kconfig-files
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#write-kconfig-files
 # for more information.
 
 CONFIG_SOC_SERIES_NRF52X=y
@@ -12,7 +12,7 @@ CONFIG_ARM_MPU=y
 # Enable GPIO
 CONFIG_GPIO=y
 
-# Use pinctrl
+# Enable pinctrl
 CONFIG_PINCTRL=y
 
 # Place application at &code_partition address
@@ -29,6 +29,9 @@ CONFIG_FLASH=y
 CONFIG_FLASH_PAGE_LAYOUT=y
 CONFIG_FLASH_MAP=y
 
+# Uncomment this if not using an external 32 kHz crystal
+# CONFIG_CLOCK_CONTROL_NRF_K32SRC_RC=y
+
 # Enable ZMK BLE and USB output
 CONFIG_ZMK_BLE=y
 CONFIG_ZMK_USB=y

zmk/templates/board/nrf52840/common_outer.dtsi

@@ -14,46 +14,50 @@
     status = "okay";
 };
 
-&usbd {
-    status = "okay";
+&uart0 {
+    compatible = "nordic,nrf-uarte";
+    current-speed = <115200>;
+    pinctrl-0 = <&uart0_default>;
+    pinctrl-1 = <&uart0_sleep>;
+    pinctrl-names = "default", "sleep";
+};
 
-    cdc_acm_uart: cdc_acm_uart {
-        compatible = "zephyr,cdc-acm-uart";
-    };
+zephyr_udc0: &usbd {
+    status = "okay";
 };
 
 &flash0 {
     // Adjust this flash map as is necessary for your board. For more information, see
-    // https://docs.zephyrproject.org/latest/reference/storage/flash_map/flash_map.html
+    // https://docs.zephyrproject.org/3.5.0/services/storage/flash_map/flash_map.html#relationship-with-devicetree
     partitions {
         compatible = "fixed-partitions";
         #address-cells = <1>;
         #size-cells = <1>;
 
         code_partition: partition@1000 {
-            reg = <0x00001000 0x000d3000>;
+            reg = <DT_SIZE_K(4) DT_SIZE_K(844)>;
         };
 
         // If using a bootloader with SoftDevice included, replace the code_partition
         // node above with the following. If using SoftDevice v7, change 26000 to 27000.
 
         // sd_partition: partition@0 {
-        //     reg = <0x00000000 0x00026000>;
+        //     reg = <0x0 <DT_SIZE_K(4)>;
         // };
         // code_partition: partition@26000 {
-        //     reg = <0x00026000 0x000c6000>;
+        //     reg = <DT_SIZE_K(152) DT_SIZE_K(792)>;
         // };
 
         // The flash starting at 0x000d4000 and ending at
         // 0x000f3fff is reserved for use by the application.
 
-        // Storage partition will be used by FCB/LittleFS/NVS if enabled.
+        // Storage partition will be used by NVS if enabled.
         storage_partition: partition@d4000 {
-            reg = <0x000d4000 0x00020000>;
+            reg = <DT_SIZE_K(848) DT_SIZE_K(128)>;
         };
 
         boot_partition: partition@f4000 {
-            reg = <0x000f4000 0x0000c000>;
+            reg = <DT_SIZE_K(976) DT_SIZE_K(48)>;
         };
     };
 };

zmk/templates/board/nrf52840/pinctrl.dtsi

@@ -1,6 +1,6 @@
 // This file was generated from a template. Edit it to match your keyboard.
-// See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html
-// and https://docs.zephyrproject.org/3.6.0/hardware/pinctrl/index.html for
+// See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html
+// and https://docs.zephyrproject.org/3.5.0/hardware/pinctrl/index.html for
 // more instructions.
 
 #include <dt-bindings/pinctrl/nrf-pinctrl.h>

zmk/templates/board/nrf52840/split/${id}-layouts.dtsi

@@ -0,0 +1 @@
+<%inherit file="/common/layouts.dtsi" />

zmk/templates/board/nrf52840/split/${id}.dtsi

@@ -10,8 +10,7 @@
         zephyr,flash = &flash0;
         // Uncomment this if you enabled one of the "vddh" nodes below.
         // zmk,battery = &vbatt;
-        zmk,kscan = &kscan;
-        zmk,matrix_transform = &default_transform;
+        zmk,physical-layout = &default_layout;
     };
 </%block>
 <%block name="kscan">

zmk/templates/board/nrf52840/unibody/${id}-layouts.dtsi

@@ -0,0 +1 @@
+<%inherit file="/common/layouts.dtsi" />

zmk/templates/board/nrf52840/unibody/${id}.dts

@@ -4,7 +4,6 @@
 </%block>
 <%block name="includes">
 #include "${id}-pinctrl.dtsi"
-
 </%block>
 <%block name="chosen">
     chosen {
@@ -14,8 +13,7 @@
         zephyr,flash = &flash0;
         // Uncomment this if you enabled one of the "vddh" nodes below.
         // zmk,battery = &vbatt;
-        zmk,kscan = &kscan;
-        zmk,matrix_transform = &default_transform;
+        zmk,physical-layout = &default_layout;
     };
 </%block>
 <%block name="nodes">

zmk/templates/board/other/Kconfig

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#write-kconfig-files
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#write-kconfig-files
 # for more information.
 
 if ${self.guard() | trim}

zmk/templates/board/other/Kconfig.defconfig

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#write-kconfig-files
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#write-kconfig-files
 # for more information.
 
 <%block name="before" />

zmk/templates/board/other/board.cmake

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#flash-and-debug-support
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#flash-and-debug-support
 # for more information.
 <%text>
 include(${ZEPHYR_BASE}/boards/common/uf2.board.cmake)

zmk/templates/board/other/board.yaml

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/develop/test/twister.html#board-configuration
+# See https://docs.zephyrproject.org/3.5.0/develop/test/twister.html#board-configuration
 # for more information.
 
 identifier: ${id}

zmk/templates/board/other/board_defconfig

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#write-kconfig-files
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#write-kconfig-files
 # for more information.
 
 CONFIG_BOARD_${id.upper()}=y

zmk/templates/board/other/pinctrl.dtsi

@@ -1,6 +1,6 @@
 // This file was generated from a template. Edit it to match your keyboard.
-// See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html
-// and https://docs.zephyrproject.org/3.6.0/hardware/pinctrl/index.html for
+// See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html
+// and https://docs.zephyrproject.org/3.5.0/hardware/pinctrl/index.html for
 // more instructions.
 
 &pinctrl {

zmk/templates/board/other/split/${id}-layouts.dtsi

@@ -0,0 +1 @@
+<%inherit file="/common/layouts.dtsi" />

zmk/templates/board/other/split/${id}.dtsi

@@ -1,5 +1,4 @@
 <%inherit file="/common/board_split.dtsi" />\
 <%block name="includes">
 #include "${id}-pinctrl.dtsi"
-
 </%block>

zmk/templates/board/other/split/Kconfig.board

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#write-kconfig-files
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#write-kconfig-files
 # for more information.
 
 config BOARD_${id.upper()}_LEFT

zmk/templates/board/other/unibody/${id}-layouts.dtsi

@@ -0,0 +1 @@
+<%inherit file="/common/layouts.dtsi" />

zmk/templates/board/other/unibody/${id}.dts

@@ -1,5 +1,4 @@
 <%inherit file="/common/board.dts" />
 <%block name="includes">
 #include "${id}-pinctrl.dtsi"
-
 </%block>

zmk/templates/board/other/unibody/Kconfig.board

@@ -1,5 +1,5 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html#write-kconfig-files
+# See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html#write-kconfig-files
 # for more information.
 
 config BOARD_${id.upper()}

zmk/templates/common/board.dts

@@ -1,20 +1,22 @@
 // This file was generated from a template. Edit it to match your keyboard.
-// See https://docs.zephyrproject.org/3.6.0/hardware/porting/board_porting.html
-// and https://zmk.dev/docs/development/new-shield for more instructions.
+// See https://docs.zephyrproject.org/3.5.0/hardware/porting/board_porting.html
+// and https://zmk.dev/docs/development/hardware-integration/new-shield for more
+// instructions.
 
 /dts-v1/;
 <%block name="system_includes" />
 #include <dt-bindings/zmk/matrix_transform.h>
 
 <%block name="includes" />
+#include "${id}-layouts.dtsi"
+
 / {
     model = "${name}";
     compatible = "${id}";
 
 <%block name="chosen">
     chosen {
-        zmk,kscan = &kscan;
-        zmk,matrix_transform = &default_transform;
+        zmk,physical-layout = &default_layout;
     };
 </%block>
 

zmk/templates/common/board_left.dts

@@ -1,5 +1,6 @@
 // This file was generated from a template. Edit it to match your keyboard.
-// See https://zmk.dev/docs/development/new-shield for more instructions.
+// See https://zmk.dev/docs/development/hardware-integration/new-shield for more
+// instructions.
 
 #include "${id}.dtsi"
 #include "${id}_left-pinctrl.dtsi"

zmk/templates/common/board_right.dts

@@ -1,5 +1,6 @@
 // This file was generated from a template. Edit it to match your keyboard.
-// See https://zmk.dev/docs/development/new-shield for more instructions.
+// See https://zmk.dev/docs/development/hardware-integration/new-shield for more
+// instructions.
 
 #include "${id}.dtsi"
 #include "${id}_right-pinctrl.dtsi"

zmk/templates/common/default.conf

@@ -1,5 +1,6 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://zmk.dev/docs/development/new-shield for more instructions.
+# See https://zmk.dev/docs/development/hardware-integration/new-shield for more
+# instructions.
 
 # This file will be copied into the user's config directory when they add this
 # keyboard. Define any Kconfig options users may frequently want to set here,

zmk/templates/common/hardware.zmk.yml

@@ -1,5 +1,6 @@
 # This file was generated from a template. Edit it to match your keyboard.
-# See https://zmk.dev/docs/development/hardware-metadata-files for instructions.
+# See https://zmk.dev/docs/development/hardware-integration/hardware-metadata-files
+# for instructions.
 
 file_format: "1"
 id: ${id}
@@ -13,7 +14,8 @@ arch: ${arch}
 url: https://example.com
 
 # Add any features your keyboard supports here.
-# See https://zmk.dev/docs/development/hardware-metadata-files#features.
+# See https://zmk.dev/docs/development/hardware-integration/hardware-metadata-files#features
 features:
   - keys
+  - studio  # Remove this line if your keyboard will not support ZMK Studio
 ${self.body()}

zmk/templates/common/keymap.dtsi

@@ -1,12 +1,12 @@
 // This file was generated from a template. Edit it to match your keyboard.
-// See https://zmk.dev/docs/development/new-shield for more instructions.
+// See https://zmk.dev/docs/development/hardware-integration/new-shield for more instructions.
 
 #include <behaviors.dtsi>
 #include <dt-bindings/zmk/keys.h>
 
 / {
     // Define a default keymap here.
-    // See https://zmk.dev/docs/development/new-shield#default-keymap.
+    // See https://zmk.dev/docs/development/hardware-integration/new-shield#default-keymap.
     keymap {
         compatible = "zmk,keymap";
 

zmk/templates/common/kscan.dtsi

@@ -11,7 +11,7 @@
         wakeup-source;
 
         // Replace these comments with the GPIO pins in the matrix.
-        // See https://zmk.dev/docs/development/new-shield#shield-overlays
+        // See https://zmk.dev/docs/development/hardware-integration/new-shield#shield-overlays
         col-gpios
             = </* ${node} 0 */ GPIO_ACTIVE_HIGH>
             , </* ${node} 0 */ GPIO_ACTIVE_HIGH>

zmk/templates/common/kscan_split_common.dtsi

@@ -12,7 +12,7 @@
         wakeup-source;
 
         // Replace these comments with the GPIO pins in the matrix.
-        // See https://zmk.dev/docs/development/new-shield#shield-overlays
+        // See https://zmk.dev/docs/development/hardware-integration/new-shield#shield-overlays
         row-gpios
             = </* ${node} 0 */ (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>
             , </* ${node} 0 */ (GPIO_ACTIVE_HIGH | GPIO_PULL_DOWN)>

zmk/templates/common/kscan_split_left.dtsi

@@ -1,7 +1,7 @@
 <%page args="node = '&gpio0'" />
 &kscan {
     // Replace these comments with the GPIO pins in the matrix for the left side.
-    // See https://zmk.dev/docs/development/new-shield#shield-overlays
+    // See https://zmk.dev/docs/development/hardware-integration/new-shield#shield-overlays
     col-gpios
         = </* ${node} 0 */ GPIO_ACTIVE_HIGH>
         , </* ${node} 0 */ GPIO_ACTIVE_HIGH>

zmk/templates/common/kscan_split_right.dtsi

@@ -6,7 +6,7 @@
 
 &kscan {
     // Replace these comments with the GPIO pins in the matrix for the right side.
-    // See https://zmk.dev/docs/development/new-shield#shield-overlays
+    // See https://zmk.dev/docs/development/hardware-integration/new-shield#shield-overlays
     col-gpios
         = </* ${node} 0 */ GPIO_ACTIVE_HIGH>
         , </* ${node} 0 */ GPIO_ACTIVE_HIGH>

zmk/templates/common/layouts.dtsi

@@ -0,0 +1,23 @@
+// See https://zmk.dev/docs/development/hardware-integration/physical-layouts
+// for how to configure this.
+
+#include <physical_layouts.dtsi>
+
+/ {
+    default_layout: default_layout {
+        compatible = "zmk,physical-layout";
+        display-name = "Default Layout";
+        transform = <&default_transform>;
+        kscan = <&kscan>;
+
+        // Edit this to define the positions and sizes of the keys, or remove it
+        // if your keyboard will not support ZMK Studio.
+        // https://zmk.dev/docs/development/hardware-integration/physical-layouts#optional-keys-property
+        keys  //                     w   h    x    y     rot    rx    ry
+            = <&key_physical_attrs 100 100    0    0       0     0     0>
+            , <&key_physical_attrs 100 100  100    0       0     0     0>
+            , <&key_physical_attrs 100 100    0  100       0     0     0>
+            , <&key_physical_attrs 100 100  100  100       0     0     0>
+            ;
+    };
+};