Configuration

Find the ESPH network:

Open the network settings on the apple device.
Find the SSID that starts with ESPH-XXXXXX and connect.

Setup mode:

ESPH configuration: paste the configuration string into the JSON config field:
I You can use the ESPH JSON Configurator GUI. tool to create a configuration string and then 
copy and paste in the JSON Config field.

ESPH JSON Configurator GUI. or Templates

Connection to a hidden network:

1. When not see yours network, push the button "⟲ WiFi Networks", refresh you  listing of networks.
2. When yours WI-FI SSID is hidden, push the button 'Enter SSID manually'.
a:enter SSID.
b:enter PASSWORD.
c:enter Save.

You have a choice:

1. Connect to the network by the name "SSID".
2. Or "BSSID" using mac address, we have a network amplifier and want to connect to a specific device.

Pairing via a QR code:

QR CODE:

Configuration mode:

If you press and hold the device physical button , the led will start blink after 10 sec.
In the application you press 8 times device button, led will start blink.

The ESP module will enter configuration mode.