xxHash - Extremely fast hash algorithm

xxHash is an Extremely fast Hash algorithm, running at RAM speed limits. It successfully completes the SMHasher test suite which evaluates collision, dispersion and randomness qualities of hash functions. Code is highly portable, and hashes are identical across all platforms (little / big endian).

Branch	Status
dev

Benchmarks

The reference system uses an Intel i7-9700K cpu, and runs Ubuntu x64 20.04. The open source benchmark program is compiled with clang v10.0 using -O3 flag.

Hash Name	Width	Bandwidth (GB/s)	Small Data Velocity	Quality	Comment
XXH3 (SSE2)	64	31.5 GB/s	133.1	10
XXH128 (SSE2)	128	29.6 GB/s	118.1	10
RAM sequential read	N/A	28.0 GB/s	N/A	N/A	for reference
City64	64	22.0 GB/s	76.6	10
T1ha2	64	22.0 GB/s	99.0	9	Slightly worse collisions
City128	128	21.7 GB/s	57.7	10
XXH64	64	19.4 GB/s	71.0	10
SpookyHash	64	19.3 GB/s	53.2	10
Mum	64	18.0 GB/s	67.0	9	Slightly worse collisions
XXH32	32	9.7 GB/s	71.9	10
City32	32	9.1 GB/s	66.0	10
Murmur3	32	3.9 GB/s	56.1	10
SipHash	64	3.0 GB/s	43.2	10
FNV64	64	1.2 GB/s	62.7	5	Poor avalanche properties
Blake2	256	1.1 GB/s	5.1	10	Cryptographic
SHA1	160	0.8 GB/s	5.6	10	Cryptographic but broken
MD5	128	0.6 GB/s	7.8	10	Cryptographic but broken

note 1: Small data velocity is a rough evaluation of algorithm's efficiency on small data. For more detailed analysis, please refer to next paragraph.

note 2: some algorithms feature faster than RAM speed. In which case, they can only reach their full speed when input data is already in CPU cache (L3 or better). Otherwise, they max out on RAM speed limit.

Small data

Performance on large data is only one part of the picture. Hashing is also very useful in constructions like hash tables and bloom filters. In these use cases, it's frequent to hash a lot of small data (starting at a few bytes). Algorithm's performance can be very different for such scenarios, since parts of the algorithm, such as initialization or finalization, become fixed cost. The impact of branch mis-prediction also becomes much more present.

XXH3 has been designed for excellent performance on both long and small inputs, which can be observed in the following graph:

For a more detailed analysis, visit the wiki : https://github.com/Cyan4973/xxHash/wiki/Performance-comparison#benchmarks-concentrating-on-small-data-

Quality

Speed is not the only property that matters. Produced hash values must respect excellent dispersion and randomness properties, so that any sub-section of it can be used to maximally spread out a table or index, as well as reduce the amount of collisions to the minimal theoretical level, following the birthday paradox.

xxHash has been tested with Austin Appleby's excellent SMHasher test suite, and passes all tests, ensuring reasonable quality levels. It also passes extended tests from newer forks of SMHasher, featuring additional scenarios and conditions.

Finally, xxHash provides its own massive collision tester, able to generate and compare billions of hash to test the limits of 64-bit hash algorithms. On this front too, xxHash features good results, in line with the birthday paradox. A more detailed analysis is documented in the wiki.

Build modifiers

The following macros can be set at compilation time to modify libxxhash's behavior. They are generally disabled by default.

• XXH_INLINE_ALL: Make all functions inline, with implementations being directly included within xxhash.h. Inlining functions is beneficial for speed on small keys. It's extremely effective when key length is expressed as a compile time constant, with performance improvements observed in the +200% range . See this article for details.
• XXH_PRIVATE_API: same outcome as XXH_INLINE_ALL. Still available for legacy support. The name underlines that XXH_* symbols will not be exported.
• XXH_NAMESPACE: Prefixes all symbols with the value of XXH_NAMESPACE. This macro can only use compilable character set. Useful to evade symbol naming collisions, in case of multiple inclusions of xxHash's source code. Client applications still use the regular function names, as symbols are automatically translated through xxhash.h.
• XXH_FORCE_MEMORY_ACCESS: The default method 0 uses a portable memcpy() notation. Method 1 uses a gcc-specific packed attribute, which can provide better performance for some targets. Method 2 forces unaligned reads, which is not standards compliant, but might sometimes be the only way to extract better read performance. Method 3 uses a byteshift operation, which is best for old compilers which don't inline memcpy() or big-endian systems without a byteswap instruction
• XXH_FORCE_ALIGN_CHECK: Use a faster direct read path when input is aligned. This option can result in dramatic performance improvement when input to hash is aligned on 32 or 64-bit boundaries, when running on architectures unable to load memory from unaligned addresses, or suffering a performance penalty from it. It is (slightly) detrimental on platform with good unaligned memory access performance (same instruction for both aligned and unaligned accesses). This option is automatically disabled on x86, x64 and aarch64, and enabled on all other platforms.
• XXH_VECTOR : manually select a vector instruction set (default: auto-selected at compilation time). Available instruction sets are XXH_SCALAR, XXH_SSE2, XXH_AVX2, XXH_AVX512, XXH_NEON and XXH_VSX. Compiler may require additional flags to ensure proper support (for example, gcc on linux will require -mavx2 for AVX2, and -mavx512f for AVX512).
• XXH_NO_PREFETCH : disable prefetching. XXH3 only.
• XXH_PREFETCH_DIST : select prefecting distance. XXH3 only.
• XXH_NO_INLINE_HINTS: By default, xxHash uses __attribute__((always_inline)) and __forceinline to improve performance at the cost of code size. Defining this macro to 1 will mark all internal functions as static, allowing the compiler to decide whether to inline a function or not. This is very useful when optimizing for smallest binary size, and is automatically defined when compiling with -O0, -Os, -Oz, or -fno-inline on GCC and Clang. This may also increase performance depending on compiler and architecture.
• XXH_REROLL: Reduces the size of the generated code by not unrolling some loops. Impact on performance may vary, depending on platform and algorithm.
• XXH_ACCEPT_NULL_INPUT_POINTER: if set to 1, when input is a NULL pointer, xxHash'd result is the same as a zero-length input (instead of a dereference segfault). Adds one branch at the beginning of each hash.
• XXH_STATIC_LINKING_ONLY: gives access to the state declaration for static allocation. Incompatible with dynamic linking, due to risks of ABI changes.
• XXH_NO_LONG_LONG: removes compilation of algorithms relying on 64-bit types (XXH3 and XXH64). Only XXH32 will be compiled. Useful for targets (architectures and compilers) without 64-bit support.
• XXH_IMPORT: MSVC specific: should only be defined for dynamic linking, as it prevents linkage errors.
• XXH_CPU_LITTLE_ENDIAN: By default, endianess is determined by a runtime test resolved at compile time. If, for some reason, the compiler cannot simplify the runtime test, it can cost performance. It's possible to skip auto-detection and simply state that the architecture is little-endian by setting this macro to 1. Setting it to 0 states big-endian.

For the Command Line Interface xxhsum, the following environment variables can also be set :

• DISPATCH=1 : use xxh_x86dispatch.c, to automatically select between scalar, sse2, avx2 or avx512 instruction set at runtime, depending on local host. This option is only valid for x86/x64 systems.

Building xxHash - Using vcpkg

You can download and install xxHash using the vcpkg dependency manager:

git clone https://github.com/Microsoft/vcpkg.git
cd vcpkg
./bootstrap-vcpkg.sh
./vcpkg integrate install
./vcpkg install xxhash

The xxHash port in vcpkg is kept up to date by Microsoft team members and community contributors. If the version is out of date, please create an issue or pull request on the vcpkg repository.

Example

The simplest example calls xxhash 64-bit variant as a one-shot function generating a hash value from a single buffer, and invoked from a C/C++ program:

#include "xxhash.h"

    (...)
    XXH64_hash_t hash = XXH64(buffer, size, seed);
}

Streaming variant is more involved, but makes it possible to provide data incrementally:

#include "stdlib.h"   /* abort() */
#include "xxhash.h"


XXH64_hash_t calcul_hash_streaming(FileHandler fh)
{
    /* create a hash state */
    XXH64_state_t* const state = XXH64_createState();
    if (state==NULL) abort();

    size_t const bufferSize = SOME_SIZE;
    void* const buffer = malloc(bufferSize);
    if (buffer==NULL) abort();

    /* Initialize state with selected seed */
    XXH64_hash_t const seed = 0;   /* or any other value */
    if (XXH64_reset(state, seed) == XXH_ERROR) abort();

    /* Feed the state with input data, any size, any number of times */
    (...)
    while ( /* some data left */ ) {
        size_t const length = get_more_data(buffer, bufferSize, fh);
        if (XXH64_update(state, buffer, length) == XXH_ERROR) abort();
        (...)
    }
    (...)

    /* Produce the final hash value */
    XXH64_hash_t const hash = XXH64_digest(state);

    /* State could be re-used; but in this example, it is simply freed  */
    free(buffer);
    XXH64_freeState(state);

    return hash;
}

License

The library files xxhash.c and xxhash.h are BSD licensed. The utility xxhsum is GPL licensed.

Other programming languages

Beyond the C reference version, xxHash is also available from many different programming languages, thanks to great contributors. They are listed here.

Packaging status

Many distributions bundle a package manager which allows easy xxhash installation as both a libxxhash library and xxhsum command line interface.

Special Thanks

• Takayuki Matsuoka, aka @t-mat, for creating xxhsum -c and great support during early xxh releases
• Mathias Westerdahl, aka @JCash, for introducing the first version of XXH64
• Devin Hussey, aka @easyaspi314, for incredible low-level optimizations on XXH3 and XXH128