Refactor linear algebra module and remove unused code

bin/test

@@ -28,7 +28,7 @@ flags=""
 
 if [[ -n "${use_cblas}" ]]; then
     echo "Running tests using Open BLAS"
-    flags="${flags} -d vsl_vlas_cblas"
+    flags="${flags} -d vsl_blas_cblas"
 fi
 
 if [[ -n "${use_autofree}" ]]; then

blas/README.md

@@ -0,0 +1,60 @@
+# The V Basic Linear Algebra System
+
+This package implements Basic Linear Algebra System (BLAS) routines in V.
+
+| Backend  | Description                                                                                                                                                        | Status | Compilation Flags   |
+| -------- | ------------------------------------------------------------------------------------------------------------------------------------------------------------------ | ------ | ------------------- |
+| BLAS     | Pure V implementation                                                                                                                                              | Stable | `NONE`              |
+| OpenBLAS | OpenBLAS is an optimized BLAS library based on <https://github.com/xianyi/OpenBLAS>. Check the section [OpenBLAS Backend](#openblas-backend) for more information. | Stable | `-d vsl_blas_cblas` |
+
+Therefore, its routines are a little more _lower level_ than the ones in the package `vsl.la`.
+
+## OpenBLAS Backend
+
+We provide a backend for the OpenBLAS library. This backend is probably the fastest one for all platforms
+but it requires the installation of the OpenBLAS library.
+
+Use the compilation flag `-d vsl_blas_cblas` to use the OpenBLAS backend
+instead of the pure V implementation
+and make sure that the OpenBLAS library is installed in your system.
+
+Check the section below for more information about installing the OpenBLAS library.
+
+<details>
+<summary>Install dependencies</summary>
+
+### Homebrew (macOS)
+
+```sh
+brew install openblas
+```
+
+### Debian/Ubuntu GNU Linux
+
+`libopenblas-dev` is not needed when using the pure V backend.
+
+```sh
+sudo apt-get install -y --no-install-recommends \
+    gcc \
+    gfortran \
+    libopenblas-dev
+```
+
+### Arch Linux/Manjaro GNU Linux
+
+The best way of installing OpenBlas is using
+[lapack-openblas](https://aur.archlinux.org/packages/lapack-openblas/).
+
+```sh
+yay -S lapack-openblas
+```
+
+or
+
+```sh
+git clone https://aur.archlinux.org/lapack-openblas.git /tmp/lapack-openblas
+cd /tmp/lapack-openblas
+makepkg -si
+```
+
+</details>

vlas/internal/blas/conversions.v → blas/blas64/conversions.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 pub enum MemoryLayout {
 	row_major = 101

vlas/internal/blas/dgemm.v → blas/blas64/dgemm.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 // import runtime
 import sync

vlas/internal/blas/dgemv.v → blas/blas64/dgemv.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 import vsl.float.float64
 import math

vlas/internal/blas/dgemv_test.v → blas/blas64/dgemv_test.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 fn test_dgemv_no_trans_1() {
 	expected := [0.0, 0, 0, 0, 0]

vlas/internal/blas/error.v → blas/blas64/error.v

@@ -1,7 +1,8 @@
-module blas
+module blas64
 
 // Panic strings used during parameter checks.
 // This list is duplicated in netlib/blas/netlib. Keep in sync.
+
 pub const zero_incx = 'blas: zero x index increment'
 pub const zero_incy = 'blas: zero y index increment'
 

vlas/internal/blas/level1f64.v → blas/blas64/level1f64.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 import vsl.float.float64
 import math

vlas/internal/blas/level1f64_ddot.v → blas/blas64/level1f64_ddot.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 import vsl.float.float64
 

vlas/internal/blas/level2f64.v → blas/blas64/level2f64.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 import math
 import vsl.float.float64

vlas/internal/blas/level3f64.v → blas/blas64/level3f64.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 import vsl.float.float64
 import math

vlas/internal/blas/util.v → blas/blas64/util.v

@@ -1,4 +1,4 @@
-module blas
+module blas64
 
 // [SD]gemm behavior constants. These are kept here to keep them out of the
 // way during single precision code genration.

vlas/cflags_d_vsl_vlas_cblas.v → blas/cflags_d_vsl_blas_cblas.v

@@ -1,4 +1,4 @@
-module vlas
+module blas
 
 #flag linux -O2 -I/usr/local/include -I/usr/lib
 #flag linux -L/usr/local/lib -L/usr/lib
@@ -7,11 +7,9 @@ module vlas
 // Intel, M1 brew, and MacPorts
 #flag darwin -I/usr/local/opt/openblas/include -I/opt/homebrew/opt/openblas/include -I/opt/local/opt/openblas/include
 #flag darwin -L/usr/local/opt/openblas/lib -L/opt/homebrew/opt/openblas/lib -L/opt/local/opt/openblas/lib
-#flag darwin -L/usr/local/opt/lapack/lib -L/opt/homebrew/opt/lapack/lib -L/opt/local/opt/lapack/lib
 #flag -I@VMODROOT
-#flag -lopenblas -llapacke
+#flag -lopenblas
 
 $if macos {
-	#include <lapacke.h>
 	#include <cblas.h>
 }

vlas/conversions.v → blas/conversions.v

@@ -1,16 +1,16 @@
-module vlas
+module blas
 
 import strconv
 import math
 import math.complex
 import vsl.errors
-import vsl.vlas.internal.blas
+import vsl.blas.blas64
 
-pub fn c_trans(trans bool) blas.Transpose {
+pub fn c_trans(trans bool) blas64.Transpose {
 	return if trans { .trans } else { .no_trans }
 }
 
-pub fn c_uplo(up bool) blas.Uplo {
+pub fn c_uplo(up bool) blas64.Uplo {
 	return if up { .upper } else { .lower }
 }