Add a PrusaSlicer printer profile for Phrozen Sonic Mighty Revo

PrusaSlicer/printer/Phrozen Sonic Mighty Revo.ini

@@ -0,0 +1,42 @@
+# generated by PrusaSlicer 2.8.1+linux-x64-GTK3 on 2024-12-06 at 15:50:15 UTC
+absolute_correction = 0
+area_fill = 50
+bed_custom_model = 
+bed_custom_texture = 
+bed_shape = 0x0,223.78x0,223.78x126.98,0x126.98
+default_sla_material_profile = Prusa Orange Tough 0.05
+default_sla_print_profile = 0.05 Normal
+display_height = 126.98
+display_mirror_x = 1
+display_mirror_y = 0
+display_orientation = landscape
+display_pixels_x = 13320
+display_pixels_y = 5120
+display_width = 223.78
+elefant_foot_compensation = 0.2
+elefant_foot_min_width = 0.2
+fast_tilt_time = 5
+gamma_correction = 1
+high_viscosity_tilt_time = 10
+host_type = octoprint
+inherits = Original Prusa SL1
+max_exposure_time = 120
+max_initial_exposure_time = 300
+max_print_height = 235
+min_exposure_time = 1
+min_initial_exposure_time = 1
+print_host = 
+printer_model = SL1
+printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_PRUSA3D\nPRINTER_MODEL_SL1\nPRINTER_VENDOR_PHROZEN\nPRINTER_MODEL_SONIC_MIGHTY_REVO\nFILEFORMAT_ENCRYPTED.CTB\n\nSTART_CUSTOM_VALUES\nBottomWaitTimeBeforeCure_3\nWaitTimeBeforeCure_2.5\nBottomWaitTimeAfterCure_3\nWaitTimeAfterCure_1\nBottomLiftHeight_7\nLiftHeight_5\nBottomLiftSpeed_80\nLiftSpeed_80\nBottomWaitTimeAfterLift_0\nWaitTimeAfterLift_0\nRetractSpeed_150\nBottomLightPWM_255\nLightPWM_255\nEND_CUSTOM_VALUES
+printer_settings_id = 
+printer_technology = SLA
+printer_variant = default
+printer_vendor = 
+printhost_apikey = 
+printhost_cafile = 
+relative_correction = 1,1
+relative_correction_x = 1
+relative_correction_y = 1
+relative_correction_z = 1
+slow_tilt_time = 8
+thumbnails = 400x300,200x125