Version 1.4

What's new:

• Reset Settings:
  To reset the device to factory settings, follow these steps:
  1. Press the right button located on the back of the device. The device will start rebooting. Alternatively, you can disconnect and reconnect the power supply to the device.
  2. When the device turns on, and you see the firmware version displayed along with a short beep, immediately press and hold the left button.
  3. After that, you will hear a long, low-pitched signal, and a message about data erasure will appear on the screen.
     The device settings will now be reset. And the WiFi "Crypto Payment" will appear again.

Web Installer (Recommended)

You need to connect the device via Type-C to your computer and open the following website in your browser:
https://renat2985.github.io/crypto_payment_touchScreen/

Full Changelog: 1.1...1.2

Version 1.3

What's new:

• Add Cosmos, Algorand.
• Now if you click on the QRCode it will stop. If you click again the QRCode will alternate again.

Web Installer (Recommended)

You need to connect the device via Type-C to your computer and open the following website in your browser:
https://renat2985.github.io/crypto_payment_touchScreen/

Full Changelog: 1.1...1.2

Version 1.2

What's new:

• We no longer use NowNodesAPI; instead, we’ve moved to tatum.io, which is free.

Web Installer (Recommended)

You need to connect the device via Type-C to your computer and open the following website in your browser:
https://renat2985.github.io/crypto_payment_touchScreen/

Full Changelog: 1.1...1.2

Version 1.1

What's new:

• Added icons and small fix.

Web Installer (Recommended)

You need to connect the device via Type-C to your computer and open the following website in your browser:
https://renat2985.github.io/crypto_payment_touchScreen/

Version 1.0

Web Installer (Recommended)

You need to connect the device via Type-C to your computer and open the following website in your browser:

https://renat2985.github.io/crypto_payment_touchScreen/

For Professionals: Instructions for Flashing via Programmer

Specification

 { "path": "./build/esp32.esp32.esp32c3/crypto_payment_touchScreen.ino.bootloader.bin", "offset": 0 },
 { "path": "./build/esp32.esp32.esp32c3/crypto_payment_touchScreen.ino.partitions.bin", "offset": 32768 },
 { "path": "./build/esp32.esp32.esp32c3/boot_app0.bin", "offset": 57344 },
 { "path": "./build/esp32.esp32.esp32c3/crypto_payment_touchScreen.ino.bin", "offset": 65536 }