STM32F103C6, STM32F103C8, STM32F103CB
s.bus controlled lights. Each light can lit or blink with pattern based on channel value
- off
- slow blink (car blinker)
- fast blink
- strobe
- double strobe (airbus like)
- on Now up to 8 independent lights. Continue blinking on Failsafe mode. Reset whole device after 5s of no signal from Rx, trying to restore serial communication. Configurable for ch1-8 or ch9-16 by jumper.
It is easy to modify program for example for car blinker based on steer channel, reverse light based on throttle channel, etc - only by modifying config_set.cpp, where are set light patterns based on channel value.