Test release dev #2

peterdragun · 2024-07-18T14:17:18Z

This change fixes the following bug(s):

I have tested this change with the following hardware & software combinations:

I have run the esptool.py automated integration tests with this change and the above hardware:

Fixes misspelling of `triggered` in serial protocol docs. Signed-off-by: hasheddan <[email protected]>

- https://github.com/tomerfiliba-org/reedsolomon/releases/tag/v1.6.1 - this seems to be related to licenses only. - https://github.com/tomerfiliba-org/reedsolomon/releases/tag/v1.7.0 - this is related to installation. Closes espressif#872

…EY5) eFuse module has a hardware bug. It is related to ESP32-C3, C6, S3, H2 chips: - BLOCK9 (BLOCK_KEY5) can not be used by XTS_AES keys. For H2 chips, the BLOCK9 (BLOCK_KEY5) can not be used by ECDSA keys. S2 does not have such a hardware bug.

The image formats know about the special value 0xee used to disable WP. Display this with image_info. E.g.: ESP32-C3 extended image header ============================== WP pin: 0xee (disabled)

Example: Flash pins drive settings: clk_drv: 0x0, q_drv: 0x0, d_drv: 0x0, cs0_drv: 0x0, hd_drv: 0x0, wp_drv: 0x0 Chip ID: 5 (ESP32-C3) Minimal chip revision: v0.0, (legacy min_rev = 0) Maximal chip revision: v655.35 An unknown ID will be printed as: Chip ID: 42 (Unknown ID)

Closes espressif#873

EFUSE_PWR_ON_NUM in C3 has default value = 0x2880, now = 0x3000

Closes espressif#732

…ng yaml support

- esptool: Updates eFuses wafer major&minor versions - esptool(esp32c6): Adds package versions - espefuse(esp32c6): Replace PKG_VERSION BLK_VERSION_MINOR BLK_VERSION_MAJOR - espefuse(esp32c6): Adds adc calib efuses - espefuse: Adds yaml files for Build with PyInstaller

Closes espressif#881

…s during flashing

…L backend is used Closes espressif#878

Closes espressif#461

…atures

Closes espressif#982

Closes espressif#980

…e transitions

…lize boot-up

…d(new) Added features: - read cmds can be run after burn cmds - the dump cmd can be used to create a united efuse file in --virt mode - the dump cmd can be used a few times without changing original data - updated the doc

…MacOS Related to espressif/esp-idf#14058

Update of conventional-commi-linter because of not working with Python version 3.12. UnicodeEncodeError: 'charmap' codec can't encode character '\u274c' in position 2: character maps to <undefined>

- Enables USB-serial/JTAG stub - Enables USE_MAX_CPU_FREQ

github-actions · 2024-07-18T14:17:55Z

	Messages
📖	You might consider squashing your 3 commits (simplifying branch history).

👋 Hello peterdragun, we appreciate your contribution to this project!

📘 Please review the project's Contributions Guide for key guidelines on code, documentation, testing, and more.

Click to see more instructions ...

This automated output is generated by the PR linter DangerJS, which checks if your Pull Request meets the project's requirements and helps you fix potential issues.

DangerJS is triggered with each push event to a Pull Request and modify the contents of this comment.

Please consider the following:
- Danger mainly focuses on the PR structure and formatting and can't understand the meaning behind your code or changes.
- Danger is not a substitute for human code reviews; it's still important to request a code review from your colleagues.
- Addressing info messages (📖) is strongly recommended; they're less critical but valuable.
- To manually retry these Danger checks, please navigate to the Actions tab and re-run last Danger workflow.

Review and merge process you can expect ...

We do welcome contributions in the form of bug reports, feature requests and pull requests via this public GitHub repository.

This GitHub project is public mirror of our internal git repository

1. An internal issue has been created for the PR, we assign it to the relevant engineer.
2. They review the PR and either approve it or ask you for changes or clarifications.
3. Once the GitHub PR is approved, we synchronize it into our internal git repository.
4. In the internal git repository we do the final review, collect approvals from core owners and make sure all the automated tests are passing.
- At this point we may do some adjustments to the proposed change, or extend it by adding tests or documentation.
5. If the change is approved and passes the tests it is merged into the default branch.
5. On next sync from the internal git repository merged change will appear in this public GitHub repository.

Generated by 🚫 dangerJS against 97d5224

hasheddan and others added 30 commits July 16, 2024 12:29

Fix typo in serial protocol docs

f8d56bd

Fixes misspelling of `triggered` in serial protocol docs. Signed-off-by: hasheddan <[email protected]>

Support more recent reedsolo packages

806af0e

- https://github.com/tomerfiliba-org/reedsolomon/releases/tag/v1.6.1 - this seems to be related to licenses only. - https://github.com/tomerfiliba-org/reedsolomon/releases/tag/v1.7.0 - this is related to installation. Closes espressif#872

build(arm): add pip extra url for github action build

637c0db

ci: Fix libffi symlinks for cryptography>=40

6779495

image_info: Display disabled WP pin as disabled

660cd29

The image formats know about the special value 0xee used to disable WP. Display this with image_info. E.g.: ESP32-C3 extended image header ============================== WP pin: 0xee (disabled)

tests: Make the testsuite Windows compatible

aad3b87

espefuse: Adds external esp instance

b1e355b

Closes espressif#873

espefuse: Improve efuse error viewing

0b3524f

espefuse: Explicit setting of efuse time settings

f318f82

EFUSE_PWR_ON_NUM in C3 has default value = 0x2880, now = 0x3000

docs(Boot log): Add all esp targets to cover boot troubleshooting

5f2d20d

Closes espressif#732

fix: USB-JTAG-Serial PID detection error

18e2cf6

esptool: Move bootdesc on the top of the ram segment

b188bdd

espefuse: Move some vars under init method to speedup tool after addi…

e186381

…ng yaml support

efuse(H2): Adds RF Calibration Information

1c728c2

espsecure: Improve error message for incorrect PEM format

7377fdb

Closes espressif#881

bugfix(usb_jtag_serial): Autofeed super watchdog (SWD) to avoid reset…

0849c38

…s during flashing

esptool: Read 64-bit MAC address on C6 and H2

b2df4a1

bugfix: Adjust wrapper scripts to not import themselves

40cd69e

bugfix(espsecure): Print a clear error message if incompatible OpenSS…

333fa4e

…L backend is used Closes espressif#878

fix: inconsistent usage of dirs separator

7812df2

feat(esptool): add option to dump whole flash based on detected size

024cda3

Closes espressif#461

Update version to v4.6

2b6d5e3

Update version to v4.7-dev

f7a7f92

fix(ESP32-S3): Correct RTC WDT registers to fix resets during flashing

4ffc399

Update version to v4.6.1

ccc1648

Update version to v4.7-dev

7e6fe29

docs: add explanation for flash_id example to avoid confusion

a1a5135

Harshal5 and others added 22 commits July 16, 2024 12:29

feat(espsecure): Add support for secure boot v2 using ECDSA-P384 sign…

e491378

…atures

ci(espsecure): Add tests for secure boot using ECDSA-P384 curve

22b0381

feat(esp32-p4): Add ECO1 magic number

9bff02c

fix(espefuse): Use stub class if stub flasher is running

ea4c69e

Closes espressif#982

feat(reset): Automatically reconnect if port disconnects during reset

2579e12

Closes espressif#980

feat(reset): Apply recconections to the whole reset sequence, not lin…

69b8ffa

…e transitions

fix(esp32-c5): Use a longer reset delay with usb-serial/jtag to stabi…

92e1b3a

…lize boot-up

feat(espefuse): Adds incompatible eFuse settings check for S3

3c2c60b

feat(espefuse): Adds support extend efuse table by user CSV file

5339354

feat(esptool): Print key_purpose name for get_security_info cmd

d3651ac

change: use pyproject.toml instead of setup.py

b2af8da

change: move tools configuration to pyproject.toml

8681f0d

ci(host_tests): Split target jobs and run in parallel

39768fb

change(port_detection): Filter out BT and WLAN debug serial ports on …

a1afaa5

…MacOS Related to espressif/esp-idf#14058

ci: fix esptool_lint GitHub action

7df0218

ci(pre-commit): Update version of commit-linter

9388ff4

Update of conventional-commi-linter because of not working with Python version 3.12. UnicodeEncodeError: 'charmap' codec can't encode character '\u274c' in position 2: character maps to <undefined>

feat(esp32c5): Add UART stub support

4cc923f

feat(esp32c5): Add USB-serial/JTAG stub support

bce33d8

- Enables USB-serial/JTAG stub - Enables USE_MAX_CPU_FREQ

ci(dev-release): use commitizen for dev release

531c90c

change: remove failing part of action for test

ef96323

change: Update version to 4.8.0.dev5

e8efc1e

peterdragun force-pushed the test_release_dev branch 4 times, most recently from 5dcf956 to 6bd3025 Compare July 18, 2024 15:07

fix: this is fix for ci config to test release

97d5224

peterdragun force-pushed the test_release_dev branch from 05b216c to 97d5224 Compare July 18, 2024 15:21

peterdragun force-pushed the master branch from 531c90c to 7cc35e4 Compare August 22, 2024 13:37

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

Test release dev #2

Test release dev #2

peterdragun commented Jul 18, 2024

github-actions bot commented Jul 18, 2024 •

edited

Loading

Test release dev #2

Are you sure you want to change the base?

Test release dev #2

Conversation

peterdragun commented Jul 18, 2024

This change fixes the following bug(s):

I have tested this change with the following hardware & software combinations:

I have run the esptool.py automated integration tests with this change and the above hardware:

github-actions bot commented Jul 18, 2024 • edited Loading

github-actions bot commented Jul 18, 2024 •

edited

Loading