This repository contains code for a lightweight and ground optimized lidar odometry and mapping (LeGO-LOAM) system for ROS compatible UGVs. The system takes in point cloud from a Velodyne VLP-16 Lidar (palced horizontal) and optional IMU data as inputs. It outputs 6D pose estimation in real-time. A demonstration of the system can be found here -> https://www.youtube.com/watch?v=O3tz_ftHV48
You can use the following commands to download and compile the package.
cd ~/catkin_ws/src
git clone https://github.com/RobustFieldAutonomyLab/LeGO-LOAM.git
cd ..
catkin_make -j1
When you compile the code for the first time, you need to add "-j1" behind "catkin_make" for generating some message types. "-j1" is not needed for future compiling.
LeGO-LOAM is speficifally optimized for a horizontally placed VLP-16 on a ground vehicle. It assumes there is always a ground plane in the scan. The UGV we are using is Clearpath Jackal. It has a built-in IMU.
The package performs segmentation before feature extraction.
Lidar odometry performs two-step Levenberg Marquardt optimization to get 6D transformation.
The key thing to adapt the code to a new sensor is making sure the point cloud can be properly projected to an range image and ground can be correctly detected. For example, VLP-16 has a angular resolution of 0.2° and 2° along two directions. It has 16 beams. The angle of the bottom beam is -15°. Thus, the parameters in "utility.h" are listed as below. When you implement new sensor, make sure that the ground_cloud has enough points for matching. Before you post any issues, please read this.
extern const int N_SCAN = 16;
extern const int Horizon_SCAN = 1800;
extern const float ang_res_x = 0.2;
extern const float ang_res_y = 2.0;
extern const float ang_bottom = 15.0;
extern const int groundScanInd = 7;
Another example for Velodyne HDL-32e range image projection:
extern const int N_SCAN = 32;
extern const int Horizon_SCAN = 1800;
extern const float ang_res_x = 360.0/Horizon_SCAN;
extern const float ang_res_y = 41.333/float(N_Scan-1);
extern const float ang_bottom = 30.666666;
extern const int groundScanInd = 20;
One important thing to keep in mind is that our current implementation for range image projection is only suitable for sensors that have evenly distributed channels. If you want to use our algorithm with Velodyne VLP-32c or HDL-64e, you need to write your own implementation for such projection. If the point cloud is not projected properly, you will lose many points and performance.
If you are using your lidar with an IMU, make sure your IMU is aligned properly with the lidar. The algorithm uses IMU data to correct the point cloud distortion that is cause by sensor motion. If the IMU is not aligned properly, the usage of IMU data will deteriorate the result.
- Run the launch file:
roslaunch lego_loam run.launch
Notes: The parameter "/use_sim_time" is set to "true" for simulation, "false" to real robot usage.
- Play existing bag files:
rosbag play *.bag --clock --topic /velodyne_points /imu/data
Notes: Though /imu/data is optinal, it can improve estimation accuracy greatly if provided. Some sample bags can be downloaded from here If your IMU frame doesn't align with Velodyne frame, use of IMU data will cause significant drift.
Thank you for citing our LeGO-LOAM paper if you use any of this code:
@inproceedings{legoloam2018,
title={LeGO-LOAM: Lightweight and Ground-Optimized Lidar Odometry and Mapping on Variable Terrain},
author={Tixiao Shan and Brendan Englot},
booktitle={IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS)},
pages={4758-4765},
year={2018},
organization={IEEE}
}