| Bileşenler | Minimum Gereksinimler |
|---|---|
| CPU | 4 |
| RAM | 8+ GB |
| Storage | 400 GB SSD |
sudo apt update && sudo apt upgrade -y
sudo apt install curl git wget htop tmux build-essential jq make lz4 gcc unzip -y
cd $HOME
VER="1.21.3"
wget "https://golang.org/dl/go$VER.linux-amd64.tar.gz"
sudo rm -rf /usr/local/go
sudo tar -C /usr/local -xzf "go$VER.linux-amd64.tar.gz"
rm "go$VER.linux-amd64.tar.gz"
[ ! -f ~/.bash_profile ] && touch ~/.bash_profile
echo "export PATH=$PATH:/usr/local/go/bin:~/go/bin" >> ~/.bash_profile
source $HOME/.bash_profile
[ ! -d ~/go/bin ] && mkdir -p ~/go/bin
cd $HOME
wget https://github.com/yetanotherco/aligned_layer_tendermint/releases/download/v0.1.0/alignedlayerd
chmod +x alignedlayerd
sudo mv alignedlayerd /usr/local/bin/
cd $HOME
alignedlayerd version
NODE_HOME=$HOME/.alignedlayer
CHAIN_BINARY=alignedlayerd
CHAIN_ID=alignedlayer
PEER_ADDRESSES=("91.107.239.79" "116.203.81.174" "88.99.174.203" "128.140.3.188")
NOT: nodename kendi node adınızı ayzabilirsiniz.
alignedlayer init NodeName \
--chain-id alignedlayer --overwrite
curl -Ls https://raw.githubusercontent.com/molla202/AlignedLayer/main/genesis.json > $HOME/.alignedlayer/config/genesis.json
curl -Ls https://raw.githubusercontent.com/molla202/AlignedLayer/main/addrbook.json > $HOME/.alignedlayer/config/addrbook.json
for ADDR in "${PEER_ADDRESSES[@]}"; do
GENESIS=$(curl -f "$ADDR:26657/genesis" | jq '.result.genesis')
if [ -n "$GENESIS" ]; then
echo "$GENESIS" > $NODE_HOME/config/genesis.json;
break;
fi
done
for ADDR in "${PEER_ADDRESSES[@]}"; do
PEER_ID=$(curl -s "$ADDR:26657/status" | jq -r '.result.node_info.id')
if [ -n "$PEER_ID" ]; then
PEERS+=("$PEER_ID@$ADDR:26656")
fi
done
PEER_LIST=$(IFS=,; echo "${PEERS[*]}")
$CHAIN_BINARY config set config p2p.persistent_peers "$PEER_LIST" --skip-validate
$CHAIN_BINARY config set config rpc.laddr "tcp://0.0.0.0:26657" --skip-validate
sed -i -e "s|^seeds *=.*|seeds = \"[email protected]:24210\"|" $HOME/.alignedlayer/config/config.toml
sed -i -e 's|^persistent_peers *=.*|persistent_peers ="[email protected]:20656,[email protected]:26656,[email protected]:26656,[email protected]:26656, [email protected]:20656,[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656,[email protected]:26656"|' $HOME/.alignedlayer/config/config.toml
sed -i -e "s|^minimum-gas-prices *=.*|minimum-gas-prices = \"0.0001stake\"|" $HOME/.alignedlayer/config/app.toml
sed -i \
-e 's|^pruning *=.*|pruning = "custom"|' \
-e 's|^pruning-keep-recent *=.*|pruning-keep-recent = "100"|' \
-e 's|^pruning-keep-every *=.*|pruning-keep-every = "0"|' \
-e 's|^pruning-interval *=.*|pruning-interval = "19"|' \
$HOME/.alignedlayer/config/app.toml
sudo tee /etc/systemd/system/alignedlayerd.service > /dev/null <<EOF
[Unit]
Description=alignedlayerd
After=network-online.target
[Service]
User=root
ExecStart=$(which alignedlayerd) start
Restart=always
RestartSec=3
LimitNOFILE=65535
[Install]
WantedBy=multi-user.target
EOF
sed -i -e "s%^proxy_app = \"tcp://127.0.0.1:26658\"%proxy_app = \"tcp://127.0.0.1:24258\"%; s%^laddr = \"tcp://127.0.0.1:26657\"%laddr = \"tcp://127.0.0.1:24257\"%; s%^pprof_laddr = \"localhost:6060\"%pprof_laddr = \"localhost:24260\"%; s%^laddr = \"tcp://0.0.0.0:26656\"%laddr = \"tcp://0.0.0.0:24256\"%; s%^prometheus_listen_addr = \":26660\"%prometheus_listen_addr = \":24266\"%" $HOME/.alignedlayer/config/config.toml
sed -i -e "s%^address = \"tcp://0.0.0.0:1317\"%address = \"tcp://0.0.0.0:24217\"%; s%^address = \":8080\"%address = \":24280\"%; s%^address = \"localhost:9090\"%address = \"0.0.0.0:24290\"%; s%^address = \"0.0.0.0:9091\"%address = \"0.0.0.0:24291\"%; s%:8545%:24245%; s%:8546%:24246%; s%:6065%:24265%" $HOME/.alignedlayer/config/app.toml
YADA manuel port belirlicem derseniz.ç altaki 16 sayısını değiştiredebilirsiniz.yukardakini yaaprsanız bunu yapmıyorsunuz.
port=16
echo "export $port" >> $HOME/.bash_profile
alignedlayerd config set config rpc.laddr "tcp://0.0.0.0:${port}657" --skip-validate
sed -i.bak -e "s%:1317%:${port}317%g; s%:8080%:${port}080%g; s%:9090%:${port}090%g; s%:9091%:${port}091%g; s%:8545%:${port}545%g; s%:8546%:${port}546%g; s%:6065%:${port}065%g" $HOME/.alignedlayer/config/app.toml
sed -i.bak -e "s%:26658%:${port}658%g; s%:26657%:${port}657%g; s%:6060%:${port}060%g; s%:26656%:${port}656%g; s%:26660%:${port}660%g" $HOME/.alignedlayer/config/config.toml
sed -i.bak -e "s%:26657%:${port}657%g" $HOME/.alignedlayer/config/client.toml
sudo systemctl daemon-reload
sudo systemctl restart alignedlayerd && sudo journalctl -u alignedlayerd -f --no-hostname -o cat
cd $HOME
sudo systemctl daemon-reload
sudo systemctl enable alignedlayerd
sudo systemctl restart alignedlayerd
sudo journalctl -u alignedlayerd -f --no-hostname -o cat
alignedlayerd keys add cüzdan-adi
cd $HOME
nano $HOME/validator.json
NOT: alttaki kodu yazıp duzenlıyeceğiz.pubkeyi öğrenmek için.
alignedlayerd tendermint show-validator
- alttaki örnektir.
{
"pubkey": {"@type":"/cosmos.crypto.ed25519.PubKey","key":"lR1d7YBVK5jYijOfWVKRFoWCsS4dg3kagT7LB9GnG8I="},
"amount": "1000000stake",
"moniker": "your-node-moniker",
"identity": "eqlab testnet validator",
"website": "optional website for your validator",
"security": "optional security contact for your validator",
"details": "optional details for your validator",
"commission-rate": "0.1",
"commission-max-rate": "0.2",
"commission-max-change-rate": "0.01",
"min-self-delegation": "1"
}
- Faucet almak için https://faucet.alignedlayer.com/
alignedlayerd tx staking create-validator $HOME/validator.json \
--from wallet --chain-id alignedlayer \
--fees 50stake
NOT: wallet adınız wallet değilse değiştirin
alignedlayerd tx staking delegate $(alignedlayerd keys show wallet --bech val -a) 1000000stake \
--from wallet --chain-id alignedlayer \
--fees 50stake
cd $HOME
sudo systemctl stop alignedlayerd
sudo systemctl disable alignedlayerd
sudo rm /etc/systemd/system/alignedlayerd.service
sudo systemctl daemon-reload
sudo rm -f /usr/local/bin/alignedlayerd
sudo rm -f $(which alignedlayerd)
sudo rm -rf $HOME/.alignedlayer
sudo rm -rf $HOME/aligned_layer_tendermint