Implement ClearFeature(ENDPOINT_HALT).

applets/clear_endpoint_halt_test.py

@@ -0,0 +1,227 @@
+#!/usr/bin/env python3
+#
+# This file is part of LUNA.
+#
+# Copyright (c) 2024 Great Scott Gadgets <[email protected]>
+# SPDX-License-Identifier: BSD-3-Clause
+
+import logging
+import os
+import time
+import usb1
+
+from amaranth                          import Elaboratable, Module, Signal
+
+from luna                              import top_level_cli, configure_default_logging
+from luna.usb2                         import USBDevice, USBStreamInEndpoint, USBStreamOutEndpoint
+from luna.gateware.stream.generator    import StreamSerializer
+from luna.gateware.usb.request.control import ControlRequestHandler
+from luna.gateware.usb.stream          import USBInStreamInterface
+
+from usb_protocol.types                import USBRequestRecipient, USBRequestType
+from usb_protocol.emitters             import DeviceDescriptorCollection
+
+# use pid.codes Test PID
+VID = 0x1209
+PID = 0x0001
+
+BULK_ENDPOINT_NUMBER = 1
+MAX_BULK_PACKET_SIZE = 512
+
+COUNTER_MAX = 251
+GET_OUT_COUNTER_VALID = 0
+
+out_counter_valid = Signal(reset=1)
+
+class VendorRequestHandler(ControlRequestHandler):
+
+    REQUEST_SET_LEDS = 0
+
+    def elaborate(self, platform):
+        m = Module()
+
+        interface         = self.interface
+        setup             = self.interface.setup
+
+        # Transmitter for small-constant-response requests
+        m.submodules.transmitter = transmitter = \
+            StreamSerializer(data_length=1, domain="usb", stream_type=USBInStreamInterface, max_length_width=1)
+        #
+        # Vendor request handlers.
+        with m.FSM(domain="usb"):
+            with m.State('IDLE'):
+                vendor = setup.type == USBRequestType.VENDOR
+                with m.If(
+                    setup.received & \
+                    (setup.type == USBRequestType.VENDOR) & \
+                    (setup.recipient == USBRequestRecipient.INTERFACE) & \
+                    (setup.index == 0)):
+                    with m.Switch(setup.request):
+                        with m.Case(GET_OUT_COUNTER_VALID):
+                            m.d.comb += interface.claim.eq(1)
+                            m.next = 'GET_OUT_COUNTER_VALID'
+                            pass
+
+            with m.State('GET_OUT_COUNTER_VALID'):
+                m.d.comb += interface.claim.eq(1)
+                self.handle_simple_data_request(m, transmitter, out_counter_valid, length=1)
+
+        return m
+
+
+
+class ClearHaltTestDevice(Elaboratable):
+
+
+    def create_descriptors(self):
+
+        descriptors = DeviceDescriptorCollection()
+
+        #
+        # We'll add the major components of the descriptors we we want.
+        # The collection we build here will be necessary to create a standard endpoint.
+        #
+
+        # We'll need a device descriptor...
+        with descriptors.DeviceDescriptor() as d:
+            d.idVendor           = VID
+            d.idProduct          = PID
+
+            d.iManufacturer      = "LUNA"
+            d.iProduct           = "Clear Endpoint Halt Test"
+            d.iSerialNumber      = "no serial"
+
+            d.bNumConfigurations = 1
+
+
+        # ... and a description of the USB configuration we'll provide.
+        with descriptors.ConfigurationDescriptor() as c:
+
+            with c.InterfaceDescriptor() as i:
+                i.bInterfaceNumber = 0
+
+                with i.EndpointDescriptor() as e:
+                    e.bEndpointAddress = 0x80 | BULK_ENDPOINT_NUMBER
+                    e.wMaxPacketSize   = MAX_BULK_PACKET_SIZE
+
+                with i.EndpointDescriptor() as e:
+                    e.bEndpointAddress = BULK_ENDPOINT_NUMBER
+                    e.wMaxPacketSize   = MAX_BULK_PACKET_SIZE
+
+
+        return descriptors
+
+
+    def elaborate(self, platform):
+        m = Module()
+
+        # Generate our domain clocks/resets.
+        m.submodules.car = platform.clock_domain_generator()
+
+        # Create our USB device interface...
+        ulpi = platform.request("aux_phy") # TODO: change to default phy
+        m.submodules.usb = usb = USBDevice(bus=ulpi)
+
+        # Add our standard control endpoint to the device.
+        descriptors = self.create_descriptors()
+        control_ep = usb.add_standard_control_endpoint(descriptors)
+
+        control_ep.add_request_handler(VendorRequestHandler())
+
+        # Add a stream endpoint to our device.
+        stream_in_ep = USBStreamInEndpoint(
+            endpoint_number=BULK_ENDPOINT_NUMBER,
+            max_packet_size=MAX_BULK_PACKET_SIZE
+        )
+        usb.add_endpoint(stream_in_ep)
+
+        stream_out_ep = USBStreamOutEndpoint(
+            endpoint_number=BULK_ENDPOINT_NUMBER,
+            max_packet_size=MAX_BULK_PACKET_SIZE
+        )
+        usb.add_endpoint(stream_out_ep)
+
+        # Always generate a monotonic count for our stream, which counts every time our
+        # stream endpoint accepts a data byte.
+        in_counter = Signal(8)
+        with m.If(stream_in_ep.stream.ready):
+            m.d.usb += in_counter.eq(in_counter + 1)
+            with m.If(in_counter == COUNTER_MAX):
+                m.d.usb += in_counter.eq(0)
+
+        prev_out_counter = Signal(8, reset=COUNTER_MAX)
+        with m.If(stream_out_ep.stream.valid):
+            out_counter = stream_out_ep.stream.payload
+            counter_increase = out_counter == (prev_out_counter + 1)
+            counter_wrap = (out_counter == 0) & (prev_out_counter == COUNTER_MAX)
+            with m.If(~counter_increase & ~counter_wrap):
+                m.d.usb += out_counter_valid.eq(0)
+                pass
+            m.d.usb += prev_out_counter.eq(out_counter)
+
+        m.d.comb += [
+            stream_in_ep.stream.valid    .eq(1),
+            stream_in_ep.stream.payload  .eq(in_counter),
+
+            stream_out_ep.stream.ready   .eq(1),
+
+        ]
+
+
+        # Connect our device as a high speed device by default.
+        m.d.comb += [
+            usb.connect          .eq(1),
+            usb.full_speed_only  .eq(1 if os.getenv('LUNA_FULL_ONLY') else 0),
+        ]
+
+
+        return m
+
+def test_clear_halt():
+    with usb1.USBContext() as context:
+        device = context.openByVendorIDAndProductID(VID, PID)
+
+        packet = device.bulkRead(BULK_ENDPOINT_NUMBER, MAX_BULK_PACKET_SIZE)
+        device.clearHalt(0x80 | BULK_ENDPOINT_NUMBER)
+        packet += device.bulkRead(BULK_ENDPOINT_NUMBER, MAX_BULK_PACKET_SIZE)
+
+        for i in range(1, len(packet)):
+            if packet[i] == packet[i-1] + 1:
+                pass
+            elif packet[i] == 0 and packet[i-1] == COUNTER_MAX:
+                pass
+            else:
+                print(f"IN test fail {i} {packet[i]} {packet[i-1]}")
+                return
+
+        print("IN OK")
+
+        data = bytes(i % (COUNTER_MAX+1) for i in range(MAX_BULK_PACKET_SIZE*3))
+        device.bulkWrite(BULK_ENDPOINT_NUMBER, data[:MAX_BULK_PACKET_SIZE])
+        device.clearHalt(BULK_ENDPOINT_NUMBER)
+        device.bulkWrite(BULK_ENDPOINT_NUMBER, data[MAX_BULK_PACKET_SIZE:])
+
+        request_type = usb1.REQUEST_TYPE_VENDOR | usb1.RECIPIENT_INTERFACE | usb1.ENDPOINT_IN
+        if device.controlRead(request_type, GET_OUT_COUNTER_VALID, 0, 0, 1)[0] == 1:
+            print("OUT OK")
+        else:
+            print("OUT FAIL")
+
+
+if __name__ == "__main__":
+    configure_default_logging()
+
+    # If our environment is suggesting we rerun tests without rebuilding, do so.
+    if os.getenv('LUNA_RERUN_TEST'):
+        logging.info("Running speed test without rebuilding...")
+
+    # Otherwise, rebuild.
+    else:
+        device = top_level_cli(ClearHaltTestDevice)
+
+        # Give the device a moment to connect.
+        if device is not None:
+            logging.info("Giving the device time to connect...")
+            time.sleep(5)
+
+    test_clear_halt()

luna/gateware/usb/request/standard.py

@@ -14,7 +14,7 @@
 
 from amaranth               import *
 from amaranth.hdl.ast       import Value, Const
-from usb_protocol.types     import USBStandardRequests, USBRequestType
+from usb_protocol.types     import USBStandardRequests, USBRequestRecipient, USBRequestType
 from usb_protocol.emitters  import DeviceDescriptorCollection
 
 from ..usb2.request         import RequestHandlerInterface, USBRequestHandler
@@ -139,6 +139,8 @@ def elaborate(self, platform):
 
                                 with m.Case(USBStandardRequests.GET_STATUS):
                                     m.next = 'GET_STATUS'
+                                with m.Case(USBStandardRequests.CLEAR_FEATURE):
+                                    m.next = 'CLEAR_FEATURE'
                                 with m.Case(USBStandardRequests.SET_ADDRESS):
                                     m.next = 'SET_ADDRESS'
                                 with m.Case(USBStandardRequests.SET_CONFIGURATION):
@@ -158,6 +160,30 @@ def elaborate(self, platform):
                     # TODO: copy the remote wakeup and bus-powered attributes from bmAttributes of the relevant descriptor?
                     self.handle_simple_data_request(m, transmitter, 0, length=2)
 
+                with m.State('CLEAR_FEATURE'):
+                    # Provide an response to the STATUS stage.
+                    with m.If(self.interface.status_requested):
+
+                        # If our stall condition is met, stall; otherwise, send a ZLP [USB 8.5.3].
+                        # For now, we only implement clearing ENDPOINT_HALT.
+                        stall_condition = \
+                            (self.interface.setup.recipient != USBRequestRecipient.ENDPOINT) | \
+                            (self.interface.setup.value     != 0) # TODO: use USBStandardFeatures.ENDPOINT_HALT when merged
+                        with m.If(stall_condition):
+                            m.d.comb += self.interface.handshakes_out.stall.eq(1)
+                        with m.Else():
+                            m.d.comb += self.send_zlp()
+
+                    # Accept the relevant value after the packet is ACK'd...
+                    with m.If(self.interface.handshakes_in.ack):
+                        m.d.comb += [
+                            self.interface.clear_endpoint_halt.enable   .eq(1),
+                            self.interface.clear_endpoint_halt.direction.eq(self.interface.setup.index[7]),
+                            self.interface.clear_endpoint_halt.number   .eq(self.interface.setup.index[0:4]),
+                        ]
+
+                        # ... and then return to idle.
+                        m.next = 'IDLE'
 
                 # SET_ADDRESS -- The host is trying to assign us an address.
                 with m.State('SET_ADDRESS'):

luna/gateware/usb/usb2/control.py

@@ -178,6 +178,8 @@ def elaborate(self, platform):
             interface.address_changed              .eq(request_handler.address_changed),
             interface.new_address                  .eq(request_handler.new_address),
 
+            interface.clear_endpoint_halt_out      .eq(request_handler.clear_endpoint_halt),
+
             request_handler.active_config          .eq(interface.active_config),
             interface.config_changed               .eq(request_handler.config_changed),
             interface.new_config                   .eq(request_handler.new_config),

luna/gateware/usb/usb2/endpoint.py

@@ -13,6 +13,7 @@
 
 from .packet          import DataCRCInterface, InterpacketTimerInterface, TokenDetectorInterface
 from .packet          import HandshakeExchangeInterface
+from .request         import ClearEndpointHaltInterface
 from ..stream         import USBInStreamInterface, USBOutStreamInterface
 from ...utils.bus     import OneHotMultiplexer
 
@@ -90,6 +91,9 @@ def __init__(self):
         self.config_changed        = Signal()
         self.new_config            = Signal(8)
 
+        self.clear_endpoint_halt_out   = Signal(ClearEndpointHaltInterface)
+        self.clear_endpoint_halt_in   = Signal(ClearEndpointHaltInterface)
+
         self.rx                    = USBOutStreamInterface()
         self.rx_complete           = Signal()
         self.rx_ready_for_response = Signal()
@@ -213,6 +217,8 @@ def elaborate(self, platform):
                 shared.handshakes_in             .connect(interface.handshakes_in),
                 shared.tokenizer                 .connect(interface.tokenizer),
 
+                interface.clear_endpoint_halt_in .eq(shared.clear_endpoint_halt_out),
+
                 # Rx interface.
                 shared.rx                        .connect(interface.rx),
                 interface.rx_complete            .eq(shared.rx_complete),
@@ -259,6 +265,10 @@ def elaborate(self, platform):
         # ... and our timer start signals.
         self.or_join_interface_signals(m, lambda interface : interface.timer.start)
 
+        self.or_join_interface_signals(m, lambda interface : interface.clear_endpoint_halt_out.enable)
+        self.or_join_interface_signals(m, lambda interface : interface.clear_endpoint_halt_out.direction)
+        self.or_join_interface_signals(m, lambda interface : interface.clear_endpoint_halt_out.number)
+
         # Finally, connect up our transmit PID select.
         conditional = m.If
 

luna/gateware/usb/usb2/endpoints/stream.py

@@ -81,6 +81,11 @@ def elaborate(self, platform):
         # Create our transfer manager, which will be used to sequence packet transfers for our stream.
         m.submodules.tx_manager = tx_manager = USBInTransferManager(self._max_packet_size)
 
+        # Check there has been a ClearFeature(ENDPOINT_HALT) request address to this endpoint.
+        clear_endpoint_halt = \
+            self.interface.clear_endpoint_halt_in.enable & \
+            self.interface.clear_endpoint_halt_in.direction & \
+            (self.interface.clear_endpoint_halt_in.number == self._endpoint_number)
         m.d.comb += [
 
             # Always generate ZLPs; in order to pass along when stream packets terminate.
@@ -94,6 +99,9 @@ def elaborate(self, platform):
             tx_manager.flush            .eq(self.flush),
             tx_manager.discard          .eq(self.discard),
 
+            # ... and data-toggle reset on clear endpoint halt...
+            tx_manager.reset_sequence   .eq(clear_endpoint_halt),
+
             # ... and our output stream...
             interface.tx                .stream_eq(tx_manager.packet_stream),
             interface.tx_pid_toggle     .eq(tx_manager.data_pid),
@@ -414,6 +422,16 @@ def elaborate(self, platform):
         with m.If(data_response_requested & data_accepted):
             m.d.usb += expected_data_toggle.eq(~expected_data_toggle)
 
+        # If there has been a ClearFeature(ENDPOINT_HALT) request address to this endpoint...
+        clear_endpoint_halt = \
+            self.interface.clear_endpoint_halt_in.enable & \
+            ~self.interface.clear_endpoint_halt_in.direction & \
+            (self.interface.clear_endpoint_halt_in.number == self._endpoint_number)
+
+        with m.If(clear_endpoint_halt):
+            # ... reset the expected data toggle.
+            m.d.usb += expected_data_toggle.eq(0)
+
 
         return m