add throwaway

Signed-off-by: Eric Curtin <[email protected]>

bin/initoverlayfs-install

@@ -1,6 +1,6 @@
 #!/bin/bash
 
-set -e
+set -ex
 
 # Constants with default value
 CAT="lz4cat"
@@ -59,9 +59,7 @@ exec_ext4() {
 }
 
 detect_initramfs() {
-    if [ ! -d "${INITRAMFS_DUMP_DIR}" ]; then
-        mkdir -p "${INITRAMFS_DUMP_DIR}"
-    fi
+    mkdir -p "${INITRAMFS_DUMP_DIR}"
 
     echo "Extracting initrd into initoverlayfs..."
 
@@ -124,7 +122,7 @@ extract_initrd_into_initoverlayfs() {
             ;;
     esac
 
-    rm -rf "$INITRAMFS_DUMP_DIR" &
+#    rm -rf "$INITRAMFS_DUMP_DIR" &
 }
 
 # main()
@@ -165,7 +163,7 @@ if ! [ -e "$INITOVERLAYFS_CONF" ] || ! grep -q '[^[:space:]]' "$INITOVERLAYFS_CO
          "bootfs $boot_partition" \
          "bootfstype ext4" \
          "initoverlayfs_builder dracut -H -f -v -M --reproducible -o \"initoverlayfs\"" \
-         "initrd_builder dracut -H -f -v -M --reproducible -m \"kernel-modules udev-rules initoverlayfs\" -o \"bash systemd systemd-initrd i18n kernel-modules-extra rootfs-block dracut-systemd usrmount base fs-lib microcode_ctl-fw_dir_override shutdown nss-softokn\"" \
+         "initrd_builder dracut -H -f -v -M --reproducible -m \"kernel-modules udev-rules initoverlayfs systemd base\" -o \"bash systemd-initrd i18n kernel-modules-extra rootfs-block dracut-systemd usrmount fs-lib microcode_ctl-fw_dir_override shutdown nss-softokn\"" \
          "udev_trigger udevadm trigger --type=devices --action=add --subsystem-match=module --subsystem-match=block --subsystem-match=virtio --subsystem-match=pci --subsystem-match=nvme --subsystem-match=mmc --subsystem-match=mmc_host --subsystem-match=platform" \
          "udev_trigger_generic udevadm trigger --type=devices --action=add" > $INITOVERLAYFS_CONF
 

initoverlayfs.spec.in

@@ -7,9 +7,9 @@ URL:           https://github.com/containers/initoverlayfs
 Source0:       %{url}/archive/%{version}/%{name}-%{version}.tar.gz
 
 BuildRequires: gcc
-Recommends: erofs-utils
 Recommends: lz4
 Recommends: gzip
+Requires: erofs-utils
 Requires: dracut
 
 %global debug_package %{nil}
@@ -26,16 +26,24 @@ gcc ${RPM_OPT_FLAGS} storage-init.c -o storage-init
 
 %install
 install -D -m755 bin/initoverlayfs-install ${RPM_BUILD_ROOT}/%{_bindir}/initoverlayfs-install
-install -D -m755 storage-init ${RPM_BUILD_ROOT}/%{_prefix}/sbin/storage-init
-install -D -m755 lib/dracut/modules.d/81initoverlayfs/module-setup.sh $RPM_BUILD_ROOT/%{_prefix}/lib/dracut/modules.d/81initoverlayfs/module-setup.sh
+install -D -m755 storage-init ${RPM_BUILD_ROOT}/%{_sbindir}/storage-init
+install -D -m755 lib/dracut/modules.d/81initoverlayfs/module-setup.sh ${RPM_BUILD_ROOT}/%{_prefix}/lib/dracut/modules.d/81initoverlayfs/module-setup.sh
+install -D -m644 lib/systemd/system/pre-initoverlayfs.target ${RPM_BUILD_ROOT}/%{_prefix}/lib/systemd/system/pre-initoverlayfs.target
+install -D -m644 lib/systemd/system/pre-initoverlayfs.service ${RPM_BUILD_ROOT}/%{_prefix}/lib/systemd/system/pre-initoverlayfs.service
+install -D -m644 lib/systemd/system/pre-initoverlayfs-switch-root.service ${RPM_BUILD_ROOT}/%{_prefix}/lib/systemd/system/pre-initoverlayfs-switch-root.service
+ln -s ../pre-initoverlayfs.service ${RPM_BUILD_ROOT}/%{_prefix}/lib/systemd/system/pre-initoverlayfs.service
+ln -s ../pre-initoverlayfs-switch-root.service ${RPM_BUILD_ROOT}/%{_prefix}/lib/systemd/system/pre-initoverlayfs-switch-root.service
 
 %files
 %license LICENSE
 %doc README.md
 %attr(0755,root,root)
 %{_bindir}/initoverlayfs-install
-%{_prefix}/sbin/storage-init
+%{_sbindir}/storage-init
 %{_prefix}/lib/dracut/modules.d/81initoverlayfs/
+%{_prefix}/lib/systemd/system/pre-initoverlayfs.target
+%{_prefix}/lib/systemd/system/pre-initoverlayfs.service
+%{_prefix}/lib/systemd/system/pre-initoverlayfs-switch-root.service
 
 %changelog
 * Thu Dec 14 2023 Stephen Smoogen <[email protected]> - 0.99-1

lib/dracut/modules.d/81initoverlayfs/module-setup.sh

@@ -1,22 +1,71 @@
 #!/usr/bin/bash
 
 installkernel() {
-    hostonly="" instmods erofs overlay
+    hostonly="" instmods erofs overlay loop
+}
+
+# called by dracut
+depends() {
+    echo "systemd"
+}
+
+initrd-release() {
+    local VERSION=""
+    local PRETTY_NAME=""
+    # Derive an os-release file from the host, if it exists
+    if [[ -e $dracutsysrootdir/etc/os-release ]]; then
+        # shellcheck disable=SC1090
+        . "$dracutsysrootdir"/etc/os-release
+        grep -hE -ve '^VERSION=' -ve '^PRETTY_NAME' "$dracutsysrootdir"/etc/os-release > "${initdir}"/usr/lib/initrd-release
+        [[ -n ${VERSION} ]] && VERSION+=" "
+        [[ -n ${PRETTY_NAME} ]] && PRETTY_NAME+=" "
+    else
+        # Fall back to synthesizing one, since dracut is presently used
+        # on non-systemd systems as well.
+        {
+            echo "NAME=dracut"
+            echo "ID=dracut"
+            echo "VERSION_ID=\"$DRACUT_VERSION\""
+            echo 'ANSI_COLOR="0;34"'
+        } > "${initdir}"/usr/lib/initrd-release
+    fi
+    VERSION+="dracut-$DRACUT_VERSION"
+    PRETTY_NAME+="dracut-$DRACUT_VERSION (Initramfs)"
+    {
+        echo "VERSION=\"$VERSION\""
+        echo "PRETTY_NAME=\"$PRETTY_NAME\""
+        # This addition is relatively new, intended to allow software
+        # to easily detect the dracut version if need be without
+        # having it mixed in with the real underlying OS version.
+        echo "DRACUT_VERSION=\"${DRACUT_VERSION}\""
+    } >> "$initdir"/usr/lib/initrd-release
+    echo "dracut-$DRACUT_VERSION" > "$initdir/lib/dracut/dracut-$DRACUT_VERSION"
+    ln -sf ../usr/lib/initrd-release "$initdir"/etc/initrd-release
+    ln -sf initrd-release "$initdir"/usr/lib/os-release
+    ln -sf initrd-release "$initdir"/etc/os-release
 }
 
 install() {
+if false; then
     # /usr/sbin/storage-init
     local _initbinary="/usr/lib/systemd/systemd"
 
-    inst_multiple -o /etc/initoverlayfs.conf
-    inst_multiple "$_initbinary" "$systemdutildir"/systemd-udevd \
-      udevadm modprobe \
-      /usr/lib/systemd/system/systemd-udev-settle.service \
-      /usr/lib/systemd/system/systemd-udev-trigger.service \
-      /usr/lib/systemd/system/systemd-udevd.service
-
-    inst_dir /boot /initrofs /overlay /overlay/upper /overlay/work \
-      /initoverlayfs
+    inst_multiple "$_initbinary" "${systemdutildir}/systemd-udevd" \
+      udevadm modprobe systemctl \
+      "${systemdsystemunitdir}/basic.target" \
+      "${systemdsystemunitdir}/sysinit.target" \
+      "${systemdsystemunitdir}/initrd.target" \
+      "${systemdsystemunitdir}/systemd-udev-settle.service" \
+      "${systemdsystemunitdir}/systemd-udev-trigger.service" \
+      "${systemdsystemunitdir}/systemd-udevd.service" \
+      "${systemdsystemunitdir}/initrd-switch-root.target" \
+      "${systemdsystemunitdir}/initrd-switch-root.service" \
+      "${systemdsystemunitdir}/initrd-usr-fs.target" \
+      "${systemdsystemunitdir}/sockets.target.wants/systemd-journald-dev-log.socket" \
+      "${systemdsystemunitdir}/sockets.target.wants/systemd-journald.socket" \
+      "${systemdsystemunitdir}/systemd-journald-dev-log.socket" \
+      "${systemdsystemunitdir}/systemd-journald.socket" \
+      "${systemdsystemunitdir}/systemd-vconsole-setup.service"
 
     if [ ! -e "/init" ]; then
         ln_r "$_initbinary" "/init"
@@ -26,6 +75,49 @@ install() {
         ln_r "$_initbinary" "/sbin/init"
     fi
 
+    ln_r "${systemdsystemunitdir}/pre-initoverlayfs.target" \
+      "${systemdsystemunitdir}/default.target"
+
+    for i in \
+        emergency.target \
+        rescue.target \
+        systemd-ask-password-console.service \
+        systemd-ask-password-plymouth.service; do
+        [[ -f "$systemdsystemunitdir"/$i ]] || continue
+        $SYSTEMCTL -q --root "$initdir" add-wants "$i" systemd-vconsole-setup.service
+    done
+
+    initrd-release
+fi
+
+    inst_multiple -o /etc/initoverlayfs.conf /usr/sbin/storage-init \
+      "$systemdsystemunitdir/pre-initoverlayfs.target" \
+      "$systemdsystemunitdir/pre-initoverlayfs.service" \
+      "$systemdsystemunitdir/pre-initoverlayfs-switch-root.service" \
+      "$systemdsystemunitdir/sysinit.target.wants/pre-initoverlayfs.service" \
+      "$systemdsystemconfdir/sysinit.target.wants/pre-initoverlayfs-switch-root.service"
+
+
+    inst_dir /boot /initrofs /overlay /overlay/upper /overlay/work \
+      /initoverlayfs
+
+    $SYSTEMCTL -q --root "$initdir" set-default pre-initoverlayfs.target
+    $SYSTEMCTL -q --root "$initdir" enable pre-initoverlayfs.service
+    $SYSTEMCTL -q --root "$initdir" enable pre-initoverlayfs-switch-root.service
+
     > "${initdir}/usr/bin/bash"
+
+if false; then # only needed if systemd-initrd is included
+    local initsystemd="${initdir}/${systemdsystemunitdir}"
+    rm -f "${initsystemd}/initrd-root-device.target" \
+          "${initsystemd}/initrd-root-fs.target" \
+          "${initsystemd}/initrd-parse-etc.service" \
+          "${initsystemd}/initrd-fs.target" \
+          "${initsystemd}/initrd.target" \
+          "${initsystemd}/initrd-cleanup.service" \
+          "${initsystemd}/initrd-udevadm-cleanup-db.service" \
+          "${initsystemd}/initrd-switch-root.target" \
+          "${initsystemd}/initrd-switch-root.service"
+fi
 }
 

lib/systemd/system/pre-initoverlayfs-switch-root.service

@@ -0,0 +1,15 @@
+[Unit]
+Description=Switch Root pre-initoverlayfs
+AssertPathExists=/etc/initrd-release
+DefaultDependencies=no
+ConditionPathExists=/etc/initrd-release
+AllowIsolate=yes
+OnFailure=emergency.target
+OnFailureJobMode=replace-irreversibly
+Before=sysinit.target pre-initoverlayfs.target
+After=systemd-journald.service pre-initoverlayfs.service
+
+[Service]
+Type=oneshot
+ExecStart=systemctl --no-block switch-root /initoverlayfs
+

lib/systemd/system/pre-initoverlayfs-switch-root.target

@@ -0,0 +1,10 @@
+[Unit]
+Description=Switch Root pre-initoverlayfs
+AssertPathExists=/etc/initrd-release
+DefaultDependencies=no
+Wants=pre-initoverlayfs-switch-root.service
+Before=pre-initoverlayfs-switch-root.service
+AllowIsolate=yes
+Wants=initrd-udevadm-cleanup-db.service initrd-root-fs.target initrd-fs.target systemd-journald.service initrd-cleanup.service
+After=initrd-udevadm-cleanup-db.service initrd-root-fs.target initrd-fs.target emergency.service emergency.target initrd-cleanup.service
+

lib/systemd/system/pre-initoverlayfs.service

@@ -0,0 +1,18 @@
+[Unit]
+Description=Pre-Initoverlayfs initialization
+AssertPathExists=/etc/initrd-release
+DefaultDependencies=no
+ConditionPathExists=/etc/initrd-release
+OnFailure=emergency.target
+OnFailureJobMode=replace-irreversibly
+Before=sysinit.target pre-initoverlayfs.target
+After=systemd-journald.service
+
+[Service]
+Type=oneshot
+ExecStart=/usr/sbin/storage-init
+StandardInput=null
+StandardOutput=journal+console
+StandardError=journal+console
+RemainAfterExit=yes
+

lib/systemd/system/pre-initoverlayfs.target

@@ -0,0 +1,10 @@
+[Unit]
+Description=Pre-Initoverlayfs Default Target
+OnFailure=emergency.target
+OnFailureJobMode=replace-irreversibly
+AssertPathExists=/etc/initrd-release
+Requires=basic.target
+#Wants=initrd-root-fs.target initrd-root-device.target initrd-fs.target initrd-usr-fs.target initrd-parse-etc.service
+After=pre-initoverlayfs.service rescue.target
+AllowIsolate=yes
+

scripts/install.sh

@@ -0,0 +1,16 @@
+#!/bin/bash
+
+set -ex
+
+REL="$(git tag | tail -1)"
+mkdir -p $HOME/rpmbuild/SOURCES/
+git archive -o $HOME/rpmbuild/SOURCES/initoverlayfs-$REL.tar.gz --prefix initoverlayfs-$REL/ HEAD
+./build-scripts/create-spec.sh
+rpmbuild_output=$(rpmbuild -bb initoverlayfs.spec 2>&1)
+rpm_to_install=$(echo "$rpmbuild_output" | grep "Wrote:" | awk '{print $2}')
+if rpm -Uvh $rpm_to_install; then
+  echo "$rpmbuild_output"
+fi
+
+initoverlayfs-install
+

storage-init.c

@@ -509,6 +509,8 @@ static inline int convert_fs(conf* c) {
   "redirect_dir=on,lowerdir=/initrofs,upperdir=/overlay/upper,workdir=/" \
   "overlay/work"
 
+#define SYSROOT "/initoverlayfs"
+
 static inline void mounts(const conf* c) {
   autofree char* dev_loop = 0;
   if (c->fs.val->c_str && losetup(&dev_loop, c->fs.val->c_str))
@@ -521,19 +523,19 @@ static inline void mounts(const conf* c) {
         "%d (%s)\n",
         dev_loop, c->fstype.val->c_str, errno, strerror(errno));
 
-  if (mount("overlay", "/initoverlayfs", "overlay", 0,
+  if (mount("overlay", SYSROOT, "overlay", 0,
             "volatile," OVERLAY_STR) &&
       errno == EINVAL &&
-      mount("overlay", "/initoverlayfs", "overlay", 0, OVERLAY_STR))
+      mount("overlay", SYSROOT, "overlay", 0, OVERLAY_STR))
     print(
-        "mount(\"overlay\", \"/initoverlayfs\", \"overlay\", 0, \"" OVERLAY_STR
+        "mount(\"overlay\", \"" SYSROOT "\", \"overlay\", 0, \"" OVERLAY_STR
         "\") %d (%s)\n",
         errno, strerror(errno));
 
-  if (mount("/boot", "/initoverlayfs/boot", c->bootfstype.val->c_str, MS_MOVE,
+  if (mount("/boot", SYSROOT "/boot", c->bootfstype.val->c_str, MS_MOVE,
             NULL))
     print(
-        "mount(\"/boot\", \"/initoverlayfs/boot\", \"%s\", MS_MOVE, NULL) "
+        "mount(\"/boot\", \"" SYSROOT "/boot\", \"%s\", MS_MOVE, NULL) "
         "%d (%s)\n",
         c->bootfstype.val->c_str, errno, strerror(errno));
 }
@@ -575,6 +577,7 @@ static inline char** cmd_to_argv(char* cmd) {
 }
 
 void wait_mount_bootfs(const conf* c) {
+#if 0
   pid_t udev_wait_pid;
   fork_execlp_no_wait(udev_wait_pid, "udevadm", "wait", "-t", "8",
                       c->bootfs.val->c_str);
@@ -589,6 +592,7 @@ void wait_mount_bootfs(const conf* c) {
         udev_trigger(udev_trigger_generic_argv);
     waitpid(udev_trigger_generic_pid, 0, 0);
   }
+#endif
 
   fork_execlp("udevadm", "wait", c->bootfs.val->c_str);
 
@@ -608,13 +612,17 @@ void exec_init(void) {
 }
 
 int main(void) {
+#if 0
   mount_proc_sys_dev();
   autofclose FILE* kmsg_f_scoped = log_open_kmsg();
   kmsg_f = kmsg_f_scoped;
   pid_t udevd_pid;
   fork_execl_no_wait(udevd_pid, "/lib/systemd/systemd-udevd", "--daemon");
+#endif
   pid_t loop_pid;
   fork_execl_no_wait(loop_pid, "/usr/sbin/modprobe", "loop");
+  pid_t erofs_pid;
+  fork_execl_no_wait(erofs_pid, "/usr/sbin/modprobe", "erofs");
   autofree_conf conf conf = {.bootfs = {0, 0},
                              .bootfstype = {0, 0},
                              .fs = {0, 0},
@@ -625,24 +633,35 @@ int main(void) {
     return 0;
 
   conf_read(&conf, "/etc/initoverlayfs.conf");
+#if 0
   autofree char** udev_trigger_argv = cmd_to_argv(conf.udev_trigger.val->c_str);
   waitpid(udevd_pid, 0, 0);
   const pid_t udev_trigger_pid = udev_trigger(udev_trigger_argv);
+#endif
+
   const bool do_bootfs = convert_bootfs(&conf);
   convert_fs(&conf);
+
+#if 0
   waitpid(udev_trigger_pid, 0, 0);
+#endif
+
   waitpid(loop_pid, 0, 0);
+  waitpid(erofs_pid, 0, 0);
   if (do_bootfs)
     wait_mount_bootfs(&conf);
 
   errno = 0;
   mounts(&conf);
+
+#if 0
   if (switchroot("/initoverlayfs")) {
     print("switchroot(\"/initoverlayfs\") %d (%s)\n", errno, strerror(errno));
     return 0;
   }
 
   exec_init();
+#endif
 
   return 0;
 }