A stereo synth voice, with some tricks up its sleave.
| Pin Name | Pin Location | Function | Comment |
|---|---|---|---|
| CV_1 | C5 | Attack | Controls envelope attack |
| CV_2 | C4 | Decay | Controls envelope decay |
| CV_3 | C3 | Cutoff | Controls cutoff of filter |
| CV_4 | C2 | Resonance | Controls resonance of filter |
| Pin Name | Pin Location | Function | Comment |
|---|---|---|---|
| CV_1 | C5 | Octave | Moves the notes up or down octaves |
| CV_2 | C4 | Shape | Controls shape of waveform |
| CV_3 | C3 | Chorus Depth | Controls depth of chorus |
| CV_4 | C2 | Chorus Rate | Controls speed of chorus |
The hardware needs to be calibrated to correctly track v/oct pitch.
To re-calibrate your hardware:
- Press and hold shift for 5 seconds to start the calibration. The LED will light and then start to blink.
- First give it a 1v (C1) signal to cv_5 and cv_6 and then press the shift button.
- The LED will start to flash more quickly and is ready for the next step.
- Give it a 3v (C3) signal to cv_5 and cv_6 and press the button again.
- It will now return to normal mode with new calibration settings.
- Install the Daisy Toolchain
- Clone the repository
git clone --recursive https://github.com/cicadasound/daisy-pitch-verb.git - Change into the directory
cd daisy-pitch-verb - Setup dependencies
./build_libs.sh - Compile the firmware
make - Load onto patch.init module with Daisy Web Programmer