Support package for the Nucleo-f411re board.

Some dependencies

Assuming you already have cargo, and general embedded development tools (gdb, openocd, libusb-1.0). Install the following:

cargo install cargo-flash
cargo install cargo-embed
rustup target add thumbv7em-none-eabihf

For more help, see https://rust-embedded.github.io/cortex-m-quickstart/cortex_m_quickstart/

Flash using Probe.rs

cargo flash --chip stm32f411re --example button-interrupt

Or with cargo embed

cargo embed --release --example button-rtfm

If probe fails to flash your board you probably need to update the firmware on the onboard programmer. The updater can be found at: https://www.st.com/en/development-tools/stsw-link007.html

Board properties

• User led on PA5
• User button on PC13
• Serial port through ST-LINK on USART2, Tx: PA2 and Rx: PA3.

This repository is based on https://github.com/jkristell/nucleo-f401re (which is based on https://github.com/therealprof/stm32f407g-disc)