ReadMe

The Open Bank Project API

About

The Open Bank Project is an open-source API for banks that enables account holders to interact with their bank using a wider range of applications and services.

The OBP API supports transparency options (enabling account holders to share configurable views of their transaction data with trusted individuals and even the public), data blurring (to preserve sensitive information) and data enrichment (enabling users to add tags, comments and images to transactions).

The OBP API abstracts away the peculiarities of each core banking system so that a wide range of apps can interact with multiple banks on behalf of the account holder. We want to raise the bar of financial transparency and enable a rich ecosystem of innovative financial applications and services.

Our tagline is: "Bank as a Platform. Transparency as an Asset".

The API supports OAuth 1.0a, OAuth 2, OpenID Connect OIDC and other authentication methods including Direct Login.

Documentation

The API documentation is best viewed using the OBP API Explorer or a third-party tool that has imported the OBP Swagger definitions.

If you want to run your own copy of API Explorer II, see here

Status of API Versions

OBP instances support multiple versions of the API simultaneously (unless they are deactivated in config) To see the status (DRAFT, STABLE or BLEEDING-EDGE) of an API version, look at the root endpoint. For example, /obp/v2.0.0/root or /obp/v3.0.0/root.

24.01.2017, [V1.2.1](https://apisandbox.openbankproject.com/obp/v1.2.1/root) was marked as stable. 
24.01.2017, [V1.3.0](https://apisandbox.openbankproject.com/obp/v1.3.0/root) was marked as stable. 
08.06.2017, [V2.0.0](https://apisandbox.openbankproject.com/obp/v2.0.0/root) was marked as stable. 
27.10.2018, [V2.1.0](https://apisandbox.openbankproject.com/obp/v2.1.0/root) was marked as stable. 
27.10.2018, [V2.2.0](https://apisandbox.openbankproject.com/obp/v2.2.0/root) was marked as stable. 
18.11.2020, [V3.0.0](https://apisandbox.openbankproject.com/obp/v3.0.0/root) was marked as stable. 
18.11.2020, [V3.1.0](https://apisandbox.openbankproject.com/obp/v3.1.0/root) was marked as stable. 
16.12.2022, [V4.0.0](https://apisandbox.openbankproject.com/obp/v4.0.0/root) was marked as stable. 
16.12.2022, [V5.0.0](https://apisandbox.openbankproject.com/obp/v5.0.0/root) was marked as stable.

License

This project is dual licensed under the AGPL V3 (see NOTICE) and commercial licenses from TESOBE GmbH.

Setup

The project uses Maven 3 as its build tool.

To compile and run Jetty, install Maven 3, create your configuration in obp-api/src/main/resources/props/default.props and execute:

mvn install -pl .,obp-commons && mvn jetty:run -pl obp-api

In case the above command fails try the next one:

export MAVEN_OPTS="-Xss128m" && mvn install -pl .,obp-commons && mvn jetty:run -pl obp-api

Note: How to run via IntelliJ IDEA

Run some tests

In obp-api/src/main/resources/props create a test.default.props for tests. Set connector=mapped.
Run a single test. For instance, right-click on obp-api/test/scala/code/branches/MappedBranchProviderTest and select "Run Mapp"...
Run multiple tests: Right-click on obp-api/test/scala/code and select Run. If need be:

Goto Run / Debug configurations Test Kind: Select All in Package Package: Select code Add the absolute /path-to-your-OBP-API in the "working directory" field You might need to assign more memory via VM Options. For example:
```
-Xmx1512M -XX:MaxPermSize=512M
```
or
```
-Xmx2048m -Xms1024m -Xss2048k -XX:MaxPermSize=1024m
```
Ensure your test.default.props has the minimum settings (see test.default.props.template).

Right-click obp-api/test/scala/code and select the Scala Tests in the code to run them all.

Note: You may want to disable some tests not relevant to your setup e.g.: set bank_account_creation_listener=false in test.default.props.

Other ways to run tests

See pom.xml for test configuration.
See http://www.scalatest.org/user_guide.

From the command line

Set memory options:

export MAVEN_OPTS="-Xmx3000m -Xss2m"

Run one test:

mvn -DwildcardSuites=code.api.directloginTest test

Run all tests and save the output to a file:

export MAVEN_OPTS="-Xss128m" && mvn clean test | tee obp-api-test-results.txt

Ubuntu

If you use Ubuntu (or a derivate) and encrypted home directories (e.g. you have ~/.Private), you might run into the following error when the project is built:

uncaught exception during compilation: java.io.IOException
[ERROR] File name too long
[ERROR] two errors found
[DEBUG] Compilation failed (CompilerInterface)

The current workaround is to move the project directory onto a different partition, e.g. under /opt/.

Running the docker image

Docker images of OBP API can be found on Dockerhub: https://hub.docker.com/r/openbankproject/obp-api - pull with docker pull openbankproject/obp-api.

Props values can be set as environment variables. Props need to be prefixed with OBP_, . replaced with _, and all upper-case, e.g.:

openid_connect.enabled=true becomes OBP_OPENID_CONNECT_ENABLED=true.

Databases

The default database for testing etc is H2. PostgreSQL is used for the sandboxes (user accounts, metadata, transaction cache). The list of databases fully tested is: PostgreSQL, MS SQL and H2.

Notes on using H2 web console in Dev and Test mode:

Set DB options in the props file:

db.driver=org.h2.Driver
db.url=jdbc:h2:./obp_api.db;DB_CLOSE_ON_EXIT=FALSE

In order to start H2 web console go to http://127.0.0.1:8080/console and you will see a login screen. Please use the following values: Note: make sure the JDBC URL used matches your Props value!

Driver Class: org.h2.Driver
JDBC URL: jdbc:h2:./obp_api.db;AUTO_SERVER=FALSE
User Name:
Password:

Notes on the basic usage of Postgres

Once Postgres is installed (On macOS, use brew):

```
psql postgres
```
Create database obpdb; (or any other name of your choosing).
Create user obp; (this is the user that OBP-API will use to create and access tables etc).
Alter user obp with password daniel.says; (put this password in the OBP-API Props).
Grant all on database obpdb to obp; (So OBP-API can create tables etc.)

Then, set the db.url in your Props:

db.driver=org.postgresql.Driver
db.url=jdbc:postgresql://localhost:5432/obpdb?user=obp&password=daniel.says

Then, restart OBP-API.

Notes on using Postgres with SSL

Postgres needs to be compiled with SSL support.

Use OpenSSL to create the files you need.

For the steps, see https://www.howtoforge.com/postgresql-ssl-certificates.

In short, edit postgresql.conf:

ssl = on

ssl_cert_file = '/etc/YOUR-DIR/server.crt'

ssl_key_file = '/etc/YOUR-DIR/server.key'

And restart Postgres.

Now, this should enable SSL (on the same port that Postgres normally listens on) - but it doesn't force it. To force SSL, edit pg_hba.conf replacing the host entries with hostssl.

Now in OBP-API Props, edit your db.url and add &ssl=true. For example:

db.url=jdbc:postgresql://localhost:5432/my_obp_database?user=my_obp_user&password=the_password&ssl=true

Note: Your Java environment may need to be set up correctly to use SSL.

Restart OBP-API, if you get an error, check your Java environment can connect to the host over SSL.

Note: You can copy the following example files to prepare your own configurations:

/obp-api/src/main/resources/logback.xml.example -> /obp-api/src/main/resources/logback.xml (try TRACE or DEBUG).
/obp-api/src/main/resources/logback-test.xml.example -> /obp-api/src/main/resources/logback-test.xml (try TRACE or DEBUG).

There is a gist/tool which is useful for this. Search the web for SSLPoke. Note this is an external repository.

For example:

https://gist.github.com/4ndrej/4547029

or

git clone https://github.com/MichalHecko/SSLPoke.git .

gradle jar
cd ./build/libs/

java -jar SSLPoke-1.0.jar www.github.com 443

Successfully connected

java -jar SSLPoke-1.0.jar YOUR-POSTGRES-DATABASE-HOST PORT

You can add switches. For example, for debugging:

java -jar -Dhttps.protocols=TLSv1.1,TLSv1.2 -Djavax.net.debug=all SSLPoke-1.0.jar localhost 5432

To import a certificate:

keytool -import -storepass changeit -noprompt -alias localhost_postgres_cert -keystore /Library/Java/JavaVirtualMachines/jdk1.8.0_73.jdk/Contents/Home/jre/lib/security/cacerts -trustcacerts -file /etc/postgres_ssl_certs/server/server.crt

To get a certificate from the server / get further debug information:

openssl s_client -connect ip:port

The above section is work in progress.

Administrator role / SuperUser

In the API's props file, add the ID of your user account to super_admin_user_ids=xxxxxxxx-xxxx-xxxx-xxxx-xxxxxxxxxxxx. User Id can be retrieved via the "Get User (Current)" endpoint (e.g. /obp/v4.0.0/users/current) after login or via API Explorer (https://github.com/OpenBankProject/API-Explorer) at /#OBPv3_0_0-getCurrentUser.

Super users can give themselves any entitlement, but it is recommended to use this props only for bootstrapping (creating the first admin user). Use this admin user to create further privileged users by granting them the "CanCreateEntitlementAtAnyBank" role. This, again, can be done via API Explorer (/#OBPv2_0_0-addEntitlement, leave bank_id empty) or, more conveniently, via API Manager (https://github.com/OpenBankProject/API-Manager).

Sandbox data

To populate the OBP database with sandbox data:

In the API's props file, set allow_sandbox_data_import=true.
Grant your user the role CanCreateSandbox. See the previous section on how to do this.
Now, post the JSON data using the payload field at /#2_1_0-sandboxDataImport. An example of an import set of data (JSON) can be found here.
If successful you should see this result { "success": "Success" } and no error message.

Production Options

set the status of HttpOnly and Secure cookie flags for production, uncomment the following lines of webapp/WEB-INF/web.xml:

   <session-config>
     <cookie-config>
       <secure>true</secure>
       <http-only>true</http-only>
     </cookie-config>
   </session-config>

Running the API in Production Mode

We use 9 to run the API in production mode.

Install java and jetty9.
jetty configuration

Edit the /etc/default/jetty9 file so that it contains the following settings:

NO_START=0
JETTY_HOST=127.0.0.1 #If you want your application to be accessed from other hosts, change this to your IP address
JAVA_OPTIONS="-Drun.mode=production -XX:PermSize=256M -XX:MaxPermSize=512M -Xmx768m -verbose -Dobp.resource.dir=$JETTY_HOME/resources -Dprops.resource.dir=$JETTY_HOME/resources"

In obp-api/src/main/resources/props create a test.default.props file for tests. Set connector=mapped.
In obp-api/src/main/resources/props create a default.props file for development. Set connector=mapped.
In obp-api/src/main/resources/props create a production.default.props file for production. Set connector=mapped.
This file could be similar to the default.props file created above, or it could include production settings, such as information about the Postgresql server if you are using one. For example, it could have the following line for Postgresql configuration.
```
db.driver=org.postgresql.Driver
db.url=jdbc:postgresql://localhost:5432/yourdbname?user=yourdbusername&password=yourpassword
```
Now, build the application to generate .war file which will be deployed on the jetty server:
```
cd OBP-API/
mvn package
```
This will generate OBP-API-1.0.war under OBP-API/target/.
Copy OBP-API-1.0.war to /usr/share/jetty9/webapps/ directory and rename it to root.war
Edit the /etc/jetty9/jetty.conf file and comment out the lines:
```
etc/jetty-logging.xml
etc/jetty-started.xml
```
Now restart jetty9:
```
sudo service jetty9 restart
```
You should now be able to browse to localhost:8080 (or yourIPaddress:8080).

Using OBP-API in different app modes

portal => OBP-API as a portal i.e. without REST API.
apis => OBP-API as an APIs app i.e. only REST APIs.
apis,portal=> OBP-API as portal and apis i.e. REST APIs and web portal.

Edit your props file(s) to contain one of the next cases:
1. server_mode=portal
2. server_mode=apis
3. server_mode=apis,portal
In case it is not defined, the default case is the 3rd one. For example, server_mode=apis,portal.

Using Akka remote storage

Most internal OBP model data access now occurs over Akka. This is so the machine that has JDBC access to the OBP database can be physically separated from the OBP API layer. In this configuration we run two instances of OBP-API on two different machines and they communicate over Akka. Please see README.Akka.md for instructions.

Using SSL Encryption with kafka

For SSL encryption we use JKS keystores. Note that both the keystore and the truststore (and all keys within) must have the same password for unlocking, for which the API will stop at boot up and ask for.

Edit your props file(s) to contain:

kafka.use.ssl=true
keystore.path=/path/to/api.keystore.jks
truststore.path=/path/to/api.truststore.jks

Using SSL Encryption with RabbitMq

For SSL encryption we use JKS keystores. Note that both the keystore and the truststore (and all keys within) must have the same password for unlocking, for which the API will stop at boot up and ask for.

Edit your props file(s) to contain:

 rabbitmq.use.ssl=true
 keystore.path=/path/to/api.keystore.jks
 keystore.password=123456
 truststore.path=/path/to/api.truststore.jks

Using SSL Encryption with props file

For SSL encryption we use jks keystores. Note that keystore (and all keys within) must have the same password for unlocking, for which the API will stop at boot up and ask for.

Edit your props file(s) to contain:

jwt.use.ssl=true
keystore.path=/path/to/api.keystore.jks
keystore.alias=SOME_KEYSTORE_ALIAS

A props key value, XXX, is considered encrypted if has an encryption property (XXX.is_encrypted) in addition to the regular props key name in the props file e.g:

db.url.is_encrypted=true
db.url=BASE64URL(SOME_ENCRYPTED_VALUE)

The Encrypt/Decrypt workflow is :

Encrypt: Array[Byte]
Helpers.base64Encode(encrypted)
Props file: String
Helpers.base64Decode(encryptedValue)
Decrypt: Array[Byte]

1st, 2nd and 3rd step can be done using an external tool

Encrypting props values with OpenSSL on the command line

Export the public certificate from the keystone:

keytool -export -keystore /PATH/TO/KEYSTORE.jks -alias CERTIFICATE_ALIAS -rfc -file apipub.cert

Extract the public key from the public certificate:

openssl x509 -pubkey -noout -in apipub.cert > PUBKEY.pub`

Get the encrypted propsvalue like in the following bash script (usage ./scriptname.sh /PATH/TO/PUBKEY.pub propsvalue):

#!/bin/bash
echo -n $2 |openssl pkeyutl -pkeyopt rsa_padding_mode:pkcs1 -encrypt  -pubin -inkey $1 -out >(base64)

Using jetty password obfuscation with props file

You can obfuscate passwords in the props file the same way as for jetty:

Create the obfuscated value as described here: https://www.eclipse.org/jetty/documentation/9.3.x/configuring-security-secure-passwords.html.
A props key value, XXX, is considered obfuscated if has an obfuscation property (XXX.is_obfuscated) in addition to the regular props key name in the props file e.g:
- db.url.is_obfuscated=true
- db.url=OBF:fdsafdsakwaetcetcetc

Code Generation

Please refer to the Code Generation for links.

Customize Portal WebPage

Please refer to the Custom Webapp for links.

Using jetty password obfuscation with props file

You can obfuscate passwords in the props file the same way as for jetty:

Create the obfuscated value as described here: https://www.eclipse.org/jetty/documentation/9.3.x/configuring-security-secure-passwords.html.
A props key value, XXX, is considered obfuscated if has an obfuscation property (XXX.is_obfuscated) in addition to the regular props key name in the props file e.g:
- db.url.is_obfuscated=true
- db.url=OBF:fdsafdsakwaetcetcetc

Rate Limiting

We support rate limiting i.e functionality to limit calls per consumer key (App). Only New Style Endpoins support it. The list of they can be found at this file: https://github.com/OpenBankProject/OBP-API/blob/develop/obp-api/src/main/scala/code/api/util/NewStyle.scala.

There are two supported modes:

In-Memory
Redis

It is assumed that you have some Redis instances if you want to use the functionality in multi-node architecture.

We apply Rate Limiting for two types of access:

Authorized
Anonymous

To set up Rate Limiting in case of anonymous access edit your props file in the following way:

user_consumer_limit_anonymous_access=100, In case isn't defined default value is 60

Te set up Rate Limiting in case of the authorized access use these endpoints:

GET ../management/consumers/CONSUMER_ID/consumer/call-limits - Get Call Limits for a Consumer
PUT ../management/consumers/CONSUMER_ID/consumer/call-limits - Set Call Limits for a Consumer

In order to make it work edit your props file in next way:

use_consumer_limits=false, In case isn't defined default value is "false"
redis_address=YOUR_REDIS_URL_ADDRESS, In case isn't defined default value is 127.0.0.1
redis_port=YOUR_REDIS_PORT, In case isn't defined default value is 6379

The next types are supported:

per second
per minute
per hour
per day
per week
per month

If you exceed the rate limit per minute for instance you will get the response:

{
    "error": "OBP-10018: Too Many Requests.We only allow 3 requests per minute for this Consumer."
}

and response headers:

X-Rate-Limit-Limit → 3
X-Rate-Limit-Remaining → 0
X-Rate-Limit-Reset → 22

Description of the headers above:

X-Rate-Limit-Limit - The number of allowed requests in the current period.
X-Rate-Limit-Remaining - The number of remaining requests in the current period.
X-Rate-Limit-Reset - The number of seconds left in the current period.

Please note that first will be checked per second call limit then per minute, etc.

Info about rate limiting availability at some instance can be found over next API endpoint: https://apisandbox.openbankproject.com/obp/v3.1.0/rate-limiting. The response we are interested in looks like this:

{
  "enabled": false,
  "technology": "REDIS",
  "service_available": false,
  "is_active": false
}

Webhooks

Webhooks are used to call external URLs when certain events happen. Account Webhooks focus on events around accounts. For instance, a webhook could be used to notify an external service if a balance changes on an account. This functionality is a work in progress!

There are 3 API endpoints related to webhooks:

POST ../banks/BANK_ID/account-web-hooks - Create an Account Webhook
PUT ../banks/BANK_ID/account-web-hooks - Enable/Disable an Account Webhook
GET ../management/banks/BANK_ID/account-web-hooks - Get Account Webhooks

OpenID Connect

In order to enable an OIDC workflow at an instance of OBP-API portal app(login functionality) you need to set up the following props:

## Google as an identity provider
# openid_connect_1.client_secret=OYdWujJl******_NXzPlDI4T
# openid_connect_1.client_id=883**3244***-s4hi72j0rble0iiivq1gn09k7***tdci.apps.googleusercontent.com
# openid_connect_1.callback_url=http://127.0.0.1:8080/auth/openid-connect/callback
# openid_connect_1.endpoint.authorization=https://accounts.google.com/o/oauth2/v2/auth
# openid_connect_1.endpoint.userinfo=https://openidconnect.googleapis.com/v1/userinfo
# openid_connect_1.endpoint.token=https://oauth2.googleapis.com/token
# openid_connect_1.endpoint.jwks_uri=https://www.googleapis.com/oauth2/v3/certs
# openid_connect_1.access_type_offline=false
# openid_connect_1.button_text = Yahoo

## Yahoo as an identity provider
# openid_connect_2.client_secret=685d47412efd8b74891ad711876558189793e957
# openid_connect_2.client_id=zg0yJmk9WUEzaERzd1RtMU02JmQ9WVdrOU9FOHpTbXN5TkhNbWNHbzlNQS0tJnM9Y38uc3VtZXJzZWNyZXQmc3Y9MCZ4PWjW
# openid_connect_2.callback_url=https://1aaac045.ngrok.io/auth/openid-connect/callback-2
# openid_connect_2.endpoint.authorization=https://api.login.yahoo.com/oauth2/request_auth
# openid_connect_2.endpoint.userinfo=https://api.login.yahoo.com/openid/v1/userinfo
# openid_connect_2.endpoint.token=https://api.login.yahoo.com/oauth2/get_token
# openid_connect_2.endpoint.jwks_uri=https://api.login.yahoo.com/openid/v1/certs
# openid_connect_2.access_type_offline=true
# openid_connect_2.button_text = Yahoo

Please note in the example above you MUST run OBP-API portal at the URL: http://127.0.0.1:8080

OAuth 2.0 Authentication

In order to enable an OAuth2 workflow at an instance of OBP-API backend app you need to set up the following props:

# -- OAuth 2 ---------------------------------------------------------------------------------
# Enable/Disable OAuth 2 workflow at a server instance
# In case isn't defined default value is false
# allow_oauth2_login=false
# URL of Public server JWK set used for validating bearer JWT access tokens
# It can contain more than one URL i.e. list of uris. Values are comma separated.
# If MITREId URL is present it must be at 1st place in the list
# because MITREId URL can be an appropirate value and we cannot rely on it.
# oauth2.jwk_set.url=http://localhost:8080/jwk.json,https://www.googleapis.com/oauth2/v3/certs
# ------------------------------------------------------------------------------ OAuth 2 ------

OpenID Connect is supported.
Tested Identity providers: Google, MITREId.

Example for Google's OAuth 2.0 implementation for authentication, which conforms to the OpenID Connect specification

allow_oauth2_login=true
oauth2.jwk_set.url=https://www.googleapis.com/oauth2/v3/certs

Frozen APIs

API versions may be marked as "STABLE", if changes are made to an API which has been marked as "STABLE", then unit test FrozenClassTest will fail.

Changes to "STABLE" API cause the tests to fail:

modify request or response body structure of APIs
add or delete APIs
change the APIS' versionStatus from or to "STABLE"

If it is required for a "STABLE" api to be changed, then the class metadata must be regenerated using the FrozenClassUtil (see how to freeze an API)

Steps to freeze an API

Run the FrozenClassUtil to regenerate persist file of frozen apis information, the file is PROJECT_ROOT_PATH/obp-api/src/test/resources/frozen_type_meta_data
push the file frozen_type_meta_data to github

There is a video about the detail: demonstrate the detail of the feature

Frozen Connector InBound OutBound types

The same as Frozen APIs, if a related unit test fails, make sure whether the modification is required, if yes, run frozen util to re-generate frozen types metadata file. take RestConnector_vMar2019 as an example, the corresponding util is RestConnector_vMar2019_FrozenUtil, the corresponding unit test is RestConnector_vMar2019_FrozenTest

Scala / Lift

We use scala and liftweb: http://www.liftweb.net/.
Advanced architecture: http://exploring.liftweb.net/master/index-9.html .
A good book on Lift: "Lift in Action" by Timothy Perrett published by Manning.

Supported JDK Versions

OracleJDK: 1.8, 13
OpenJdk: 11

OpenJDK 11 is available for download here: https://jdk.java.net/archive/.

Endpoint Request and Response Example

ResourceDoc#exampleRequestBody and ResourceDoc#successResponseBody can be the follow type

Any Case class
JObject
Wrapper JArray: JArrayBody(jArray)
Wrapper String: StringBody("Hello")
Wrapper primary type: IntBody(1), BooleanBody(true), FloatBody(1.2F)...
Empty: EmptyBody

Example:

resourceDocs += ResourceDoc(
      exampleRequestBody= EmptyBody,
      successResponseBody= BooleanBody(true),
      ...
)

Language support

Add a new language

An additional language can be added via props supported_locales

Steps to add Spanish language:

tweak the property supported_locales = en_GB to supported_locales = en_GB,es_ES
add file lift-core_es_ES.properties at the folder /resources/i18n

Please note that default translation file is lift-core.properties

Name		Name	Last commit message	Last commit date
Latest commit History 13,141 Commits
.github		.github
obp-api		obp-api
obp-commons		obp-commons
.dockerignore		.dockerignore
.gitignore		.gitignore
CONTRIBUTING.md		CONTRIBUTING.md
Dockerfile		Dockerfile
FAQ.md		FAQ.md
GNU_AFFERO_GPL_V3_19_Nov_1997.txt		GNU_AFFERO_GPL_V3_19_Nov_1997.txt
Harmony_Individual_Contributor_Assignment_Agreement.txt		Harmony_Individual_Contributor_Assignment_Agreement.txt
NOTICE		NOTICE
README.kafka.md		README.kafka.md
README.md		README.md
branding.md		branding.md
cheat_sheet.md		cheat_sheet.md
completed_developments.md		completed_developments.md
credits.md		credits.md
jitpack.yml		jitpack.yml
pom.xml		pom.xml
release_notes.md		release_notes.md
roadmap.md		roadmap.md
web-app_2_3.dtd		web-app_2_3.dtd

OpenBankProject/OBP-API

Folders and files

Latest commit

History

Repository files navigation

ReadMe

About

Documentation

Status of API Versions

License

Setup

Run some tests

Other ways to run tests

From the command line

Ubuntu

Running the docker image

Databases

Notes on using H2 web console in Dev and Test mode:

Notes on the basic usage of Postgres

Notes on using Postgres with SSL

Administrator role / SuperUser

Sandbox data

Production Options

Running the API in Production Mode

Using OBP-API in different app modes

Using Akka remote storage

Using SSL Encryption with kafka

Using SSL Encryption with RabbitMq

Using SSL Encryption with props file

Encrypting props values with OpenSSL on the command line

Using jetty password obfuscation with props file

Code Generation

Customize Portal WebPage

Using jetty password obfuscation with props file

Rate Limiting

Webhooks

OpenID Connect

OAuth 2.0 Authentication

Example for Google's OAuth 2.0 implementation for authentication, which conforms to the OpenID Connect specification

Frozen APIs

Changes to "STABLE" API cause the tests to fail:

Steps to freeze an API

Frozen Connector InBound OutBound types

Scala / Lift

Supported JDK Versions

Endpoint Request and Response Example

Language support

Add a new language

About

Topics

Resources

Stars

Watchers

Forks

Releases

Packages 0

Contributors 28

Languages

Packages