Typos

ArduinoIDE/README.md

@@ -10,38 +10,56 @@ This dir contains Arduino IDE board support for the Super Duper.
 
 ### 1. Run the Arduino IDE
 Fire up the Arduino IDE.
+
 ![ScreenShot01.png](docs/ScreenShot01.png)
 
 
 ### 2. Additional Boards Manager URLs
 Go to File -> Preferences
+
 ![ScreenShot02.png](docs/ScreenShot02.png)
 
 In the section marked `Additional Boards Manager URLs` ...
+
 ![ScreenShot03.png](docs/ScreenShot03.png)
 
 Add the following entry: `https://www.mickmake.com/SuperDuper/package_mickmake_index.json` and click OK.
+
 ![ScreenShot04.png](docs/ScreenShot04.png)
 
+
+### 3. Search for the board
 Under Tools -> Board -> Boards Manager
+
 ![ScreenShot05.png](docs/ScreenShot05.png)
 ![ScreenShot06.png](docs/ScreenShot06.png)
 
 Enter in `MickMake` into the search field.
+
 ![ScreenShot07.png](docs/ScreenShot07.png)
 ![ScreenShot08.png](docs/ScreenShot08.png)
 
+
+### 4. Install the board
+
 Select the package, and then click on `Install`
+
 ![ScreenShot09.png](docs/ScreenShot09.png)
 ![ScreenShot10.png](docs/ScreenShot10.png)
 
 Then click OK when finished.
+
 ![ScreenShot11.png](docs/ScreenShot11.png)
 
+
+### 5. Select the board
+
 Go back to Tools -> Board -> Boards Manager and scroll down to select the Super Duper Board.
+
 ![ScreenShot05.png](docs/ScreenShot05.png)
 ![ScreenShot12.png](docs/ScreenShot12.png)
 
 Go back to Tools and check that it has been selected.
+
 ![ScreenShot13.png](docs/ScreenShot13.png)