v1.4.2.0

TBD

v1.4.1.0

What's Changed

• fix: actual bin height was not correctly displayed when lip was toggled

https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac

Full Changelog: v1.4.0.0...v1.4.1.0

v1.4.0.0

What's Changed

• feat: reworked baseplate generating process, now instead of using offset surface it relies on enlarged base tile. That results in better shape dimensions at the expense of clearance between some bin and baseplate surfaces
• feat: updated printability groove cuts on magnet sockets to be rotated at 45 degree angle, this allowed to use circular pattern when replicating those cuts
• feat: added option for extra cuts for magnet sockets to simplify extraction
• feat: added option for padding on the sides of baseplates
• fix: addressed a bug where preview bin size was calculated based on hardcoded values instead of user inputs
• fix: minor improvements adding names to features and bodies

addressing #99, #83, #66, #19

https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac

Full Changelog: v1.3.1.0...v1.4.0.0

v1.3.1.0

What's Changed

• feat: baseplates now support customisation of both base width and length units separately
• feat: reworked settings saving workflow, now it uses 3 buttons: "save" for persisting settings locally as new defaults, "reset" restoring settings to previously saved defaults, "factory reset" for wiping all custom settings restoring clean installation state. Now all inputs are always preserved over the period of a session.
• feat: extended persisting settings workflow to baseplates generator
• feat: added info section with a link to github page to simplify finding documentation
• chore: minor code updates to use more appropriate naming
• fix: minor improvements to error message reporting

https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac

Full Changelog: v1.2.7.0...v1.3.1.0

v1.2.7.0

What's Changed

• fix: persist XY tolerance input
• fix: removing unnecessary chamfer under stacking lip for shelled bins
• fix: addressing issue with changed sketch origin when trimming stacking lip
• feat: automatically group generated features to keep timeline tidy
• feat: simple implementation of label tab for shelled bins

https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac

Full Changelog: v1.2.6.0...v1.2.7.0

v1.2.6.0

What's Changed

• #44: fix: addressing issue with miscalculated size of the top cutout

https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac

Full Changelog: v1.2.5.0...v1.2.6.0

v1.2.5.0

What's Changed

• #43: fix: addressing issue causing grooves mispositioning which resulted in non printable screw holes

https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac

Full Changelog: v1.2.4.0...v1.2.5.0

v1.2.4.0

What's Changed

• #41: fix: addressed issue causing errors for skeletonized baseplates in recent Fusion update v2.0.16753

https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac

Full Changelog: v1.2.3.0...v1.2.4.0

v1.2.3.0 rc1

What's Changed

• #20: fix: adding .5mm clearance at the top of the tab and compartment walls to improve bin stacking
• #33: fix: generate baseplate connection holes only on outside walls
• #40: fix: addressed issue causing errors for both baseplates and bins in recent Fusion update v2.0.16753

Full Changelog: v1.2.0.0...v1.2.3.0

Pending update approval https://apps.autodesk.com/FUSION/en/Detail/Index?id=7197558650811789&appLang=en&os=Mac

v1.2.0.0

What's Changed

• Addressed issue with offset which manifested in newer versions of Fusion360 #31
• Changed the way screw holes and magnet sockets are located, this allows to correctly generate holes for smaller bin sizes addressing issue #21

Full Changelog: v1.1.0.10...v1.2.0.0