update forward #4
Open
Conversation
This file contains bidirectional Unicode text that may be interpreted or compiled differently than what appears below. To review, open the file in an editor that reveals hidden Unicode characters.
Learn more about bidirectional Unicode characters
Fixes analogContinuousSetWidth() border test.
* feat(sdmmc): Add RAW disk functions feat(sdmmc): fixed printf mismatches and missing callback feat(sdmmc): added ci.json Removed excess log_i * ci(pre-commit): Apply automatic fixes * Fixed sdmmc host check to pass CI * feat(sdmmc): fixed example USB check --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: Lucas Saavedra Vaz <[email protected]>
* ci(tests): Swap cache to artifacts to avoid errors between OSes * ci(push): Fix chunk generation for compilation * ci(tests): Fix error code propagation * ci(push): Add shebang to new script * ci(push): Fix sizes upload if there is no changes * ci(bot): Fix GitHub actions bot commit info
#9824) * fix(client): Implement readBytes in NetworkClient for faster downloads * fix(client): Implement readBytes to obey the client timeout * fix(clieant): use getTimeout() instead * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
It was returning zero, because it was not able to handle IPv4 mapped address into IPv6 address
* feat: added removeRoutes and removeHandler methods * feat: added removeRoute and removeHandler methods * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: Me No Dev <[email protected]> Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
…Thing (#9844) * fix(xtal): Add a way to change the XTAL frequency Add support for boards like SparkFun ESP32 Thing that use 26MHz XTAL * ci(pre-commit): Apply automatic fixes * feat(dbg): Print the XTAL frequency in the debug report --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* feat: added support for filters in webserver * feat: add setFilter function in StaticRequestHandler * fix: ON_STA_FILTER & ON_AP_FILTER * fix: make request handlers backward compatible * fix: ON_STA_FILTER & ON_AP_FILTER * fix: more filters to their own example * chore: grammar * fix: remove filters from header file * fix: use same root route for both interfaces * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Previously it was allowed only once before begin() was called
It used to come with IDF 4.x
Co-authored-by: Lucas Saavedra Vaz <[email protected]>
* add(board): Add LILYGO T-ETH-Lite Adds board support for Lilygo T-ETH Lite * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Similar to setUserAgent
* fix(wifi): Fix WiFi setTxPower and getTxPower We need to wait for the interface to be started in order to be able to set/get TX Power. Code was returning too early, so calling the functions after `begin()` resulted in failure. * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* fix(BLE): std::map() * Update libraries/BLE/src/BLERemoteService.cpp * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Co-authored-by: Rodrigo Garcia <[email protected]>
* fix(netbios): Return interface address for NetBIOS When NetBIOS returns a match, it should return the IP address of the device. Presently, however, it returns the address of multicast IP for the subnet since the incoming NBNS packet's UDP target will be multicast (i.e. 192.168.1.255). Iterate over the active network interfaces and check netmasks to determine where the packet came from, and return the appropriate IP interface address instead. * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
Adds a class for 0x2901 - Characteristic User Descriptor. This Descriptor is usual in BLE and describes with text what each characteristic is about. Improve Notify.ino example by adding the 0x2901 descriptor
* ci(tools): Remove ARM64 runner and use get.exe * ci(tools): Optimize get.py and verify extraction * change(tools): Push generated binaries to PR --------- Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
* fix(tests): Add CMakeLists file to compilation tests * fix(tests): Add variant files that are used in compilation * fix(c2): Move C2 as it is only tested as component --------- Co-authored-by: Me No Dev <[email protected]>
Enable the internal pull-up resistor for BUTTON_PIN
…0482) * Delete boards.txt Delete old files * Add files via upload Add new board * Add files via upload Add new board * Delete boards.txt Delete old files, modify the definition of the case error * Add files via upload Modify the definition of the case error * ci(pre-commit): Apply automatic fixes * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: Jan Procházka <[email protected]> Co-authored-by: Me No Dev <[email protected]> Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: Lucas Saavedra Vaz <[email protected]>
…file (#10510) * User can choose if calc MD5 from decrypted file At the present moment, if user want use OTA, the function calculate MD5 of the decrypted file, but if file is encrypted from source, could be more useful to know the MD5 of the encrypted file. * md5 * Update Updater.cpp * Update libraries/Update/src/Update.h Co-authored-by: Lucas Saavedra Vaz <[email protected]> * Update libraries/Update/src/Update.h Co-authored-by: Lucas Saavedra Vaz <[email protected]> * Update libraries/Update/src/Updater.cpp Co-authored-by: Lucas Saavedra Vaz <[email protected]> * Update libraries/Update/src/Updater.cpp Co-authored-by: Lucas Saavedra Vaz <[email protected]> * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: Lucas Saavedra Vaz <[email protected]> Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
…10376) * lib Network: add cpp syntax to structs * [Network] deprecate NetworkEvents::removeEvent() for std::function callbacks removing event callback via std::function pointer does not work as expected for lambdas (issue #10365) here mark NetworkEvents::removeEvent(NetworkEventFuncCb cbEvent, arduino_event_id_t event = ARDUINO_EVENT_MAX) as deprecated in favor of removing by callback's id for NetworkEvents::onEvent remove checking for dublicate event handler, this does not work for lambdas too remove NetworkEvents::find methods as unnecessary move cbEventList container inside the class declare NetworkEventCbList_t as a cpp struct with constructor, allows using std::vector.emplace() when adding new items to container optimize NetworkEvents::remove() calls to use erase-remove idiom for std::vector * [Network] hide event task under private member of NetworkEvents class prevent checkForEvent loop to be callable from outside the task's thread * refactor(NetworkEvents) code polishing and comments - rename NetworkEvents::cbEventList as private member NetworkEvents_cbEventList - NetworkEvents::getStatusBits() add const qualifier - turn statics into constexpr - add indexes to enum::arduino_event_id_t to make events indexing consistent for SOCs with/without WiFi also leave some index gaps to minimize renumbering on adding new events - add doxygen help to NetworkEvents:: methods - declare NetworkEvents::eventName() as static, that could be used without creating class scope - potential mem leak in postEvent * refactor(NetworkEvents) add (optional) mutex lock for container operations provide thread safety for dual core SoCs since std::mutex brings additional componetns of libstdc++ lib it impacts resulting image size significantly (around 50k) Might be enabled on-demand if thread-safety is required * ci(pre-commit): Apply automatic fixes * fix(spelling): Fix spelling mistakes --------- Co-authored-by: Rodrigo Garcia <[email protected]> Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com> Co-authored-by: Lucas Saavedra Vaz <[email protected]>
prints the HEXA and CHAR in order to allow the user to see why there is 1 extra char (0x00) when BREAK is received.
* docs(lib-builder): Improve UI and Docker image sections * docs(lib-builder): Apply review suggestions
* ci(triggers): Improve workflow triggering and bump versions * ci(runtime): Improve runtime tests triggers * fix(push): Fix push chunks script indentation and lib detection
* Add files via upload * Add files via upload * feat(boards): add Waveshare ESP32-S3-Touch-AMOLED boards Added three micro snow development boards to boards * feat(boards): add Waveshare ESP32-S3-Touch-AMOLED variants A trio of micro-snow variants have been added to the variants * Delete variants/waveshare_esp32_s3_touch_amoled_143/pins_arduino.h * Delete variants/waveshare_esp32_s3_touch_amoled_164 directory * Delete variants/waveshare_esp32_s3_touch_amoled_191 directory * feat(boards): Three variants of the development board were added waveshare_esp32_s3_touch_amoled_143 waveshare_esp32_s3_touch_amoled_164 waveshare_esp32_s3_touch_amoled_191 * feat(boards): Add three boards to boards * feat(boards): Add the variants * feat(boards): Fixed the boards file To ensure that each plate type only one * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
…10565) * fix(get.py): Check if win32 tools also exist when running on win64 * change(tools): Push generated binaries to PR --------- Co-authored-by: github-actions[bot] <41898282+github-actions[bot]@users.noreply.github.com>
…vel + Humidity sensor cluster (#10551) * feat(zigbee): Add power source and battery level * fix(zigbee): Make sure Indentify callback in not null * fix(zigbee): Remove leftovers and use workaround for mac capabilities * feat(zigbee) Add humidity optional cluster + fixes * feat(zigbee): Add common Zigbee.h header file * fix(zigbee): remove leftover code * ci(pre-commit): Apply automatic fixes * fix(zigbee): Fix codespell issues --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
* ci(json): Change requirements for sketches that use WiFi * ci(checks): Optimize requirement checking * fix(tests): Additional checks before running tests --------- Co-authored-by: Jan Procházka <[email protected]>
…ng (#10583) Co-authored-by: Me No Dev <[email protected]>
* Update cdc_dfu_flash.rst * Update docs/en/tutorials/cdc_dfu_flash.rst Co-authored-by: Jan Procházka <[email protected]> * Update docs/en/tutorials/cdc_dfu_flash.rst Co-authored-by: Lucas Saavedra Vaz <[email protected]> --------- Co-authored-by: Jan Procházka <[email protected]> Co-authored-by: Lucas Saavedra Vaz <[email protected]>
…or Modifier Keys (#10591) * feat(usb_kb): add keyboard layouts. new pt_br layout * feat(usb_kb): add kb layout and fixes modifier key press * feat(usb_kb): update cmakelists.txt to add new kb layout code * ci(pre-commit): Apply automatic fixes --------- Co-authored-by: pre-commit-ci-lite[bot] <117423508+pre-commit-ci-lite[bot]@users.noreply.github.com>
The correct pin is GPIO4.
Default stays the same, additional option for larger SPIFFS area. Using existing partition CSV. Tested on Feather V2 Arduino 2.3.3 ESP32 BSP 3.0.7
) Signed-off-by: Seon Rozenblum <[email protected]>
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Add this suggestion to a batch that can be applied as a single commit.
This suggestion is invalid because no changes were made to the code.
Suggestions cannot be applied while the pull request is closed.
Suggestions cannot be applied while viewing a subset of changes.
Only one suggestion per line can be applied in a batch.
Add this suggestion to a batch that can be applied as a single commit.
Applying suggestions on deleted lines is not supported.
You must change the existing code in this line in order to create a valid suggestion.
Outdated suggestions cannot be applied.
This suggestion has been applied or marked resolved.
Suggestions cannot be applied from pending reviews.
Suggestions cannot be applied on multi-line comments.
Suggestions cannot be applied while the pull request is queued to merge.
Suggestion cannot be applied right now. Please check back later.
No description provided.