Home Assistant Custom Component for Rooted Toon Smoke Sensors

This is a Custom Component for Home-Assistant (https://home-assistant.io) reads and displays sensor values from the smoke sensors connected to a rooted Eneco Toon thermostat.

The Custom Component is a modified version of the smart meter sensor component created by cyberjunky (https://github.com/cyberjunky/home-assistant-toon_smartmeter). This version should work for 2 smoke sensors.

NOTE: This component only works with rooted Eneco Toon devices.

Installation

Custom Component

• Copy directory config/custom_components/toon_smoke to your <config dir>/custom_components directory.
• Configure with config below.
• Restart Home-Assistant.

Configuration

To use this component in your installation, add the following to your configuration.yaml file:

# Example configuration.yaml entry
sensor:
  - platform: toon_smoke
    host: IP_ADDRESS
    port: 10080
    scan_interval: 10
    resources:
      - smoke01connected
      - smoke01alarmstatus
      - smoke01temperature
      - smoke01battery
      - smoke01tampering
      - smoke02connected
      - smoke02alarmstatus
      - smoke02temperature
      - smoke02battery
      - smoke02tampering

Configuration variables:

• host (Required): The IP address on which the Toon can be reached.
• port (Optional): Port used by your Toon. (default = 80 or 10080)
• scan_interval (Optional): Number of seconds between polls. (default = 10)
• resources (Required): This section tells the component which values to display.