---

Docker image for FHEM

A Docker image for FHEM house automation system, based on Debian.

Installation

Pre-build images are available on Docker Hub Reccomended pulling from Github Container Registry to allow automatic image for your system.

From Docker Hub

Currently outdated but still available

• debian stretch

    docker pull fhem/fhem
  

From Github container registry

Image with serval Services installed

Updated versions based on

• debian bullseye

• Perl 5.32.1

• NodeJS 14 LTS

• Python 3

• Supported Plattforms: linux/amd64, linux/arm/v7, linux/arm64

• NOTE: alexa-fhem, alexa-cookie, gassistant-fhem, homebridge, homebridge-fhem, tradfri-fhem are not installed per default!

    docker pull ghcr.io/fhem/fhem/fhem-docker:bullseye
  

• debian buster

• Perl 5.28.1

• NodeJS 14 LTS

• Python 3

• Supported Plattforms: linux/amd64, linux/arm/v7, linux/arm64

• NOTE: alexa-fhem, alexa-cookie, gassistant-fhem, homebridge, homebridge-fhem, tradfri-fhem are not installed per default!

    docker pull ghcr.io/fhem/fhem/fhem-docker:buster
  

are available.

Image with perl core services installed

• debian bullseye

• Perl 5.32.1

• Supported Plattforms: linux/amd64,linux/arm/v6, linux/arm/v7, linux/arm64, linux/i386,

    docker pull ghcr.io/fhem/fhem/fhem-minimal-docker:bullseye
  

• debian buster

• Perl 5.28.1

• Supported Plattforms: linux/amd64,linux/arm/v6, linux/arm/v7, linux/arm64, linux/i386,

    docker pull ghcr.io/fhem/fhem/fhem-minimal-docker:buster
  

are available.

To start your container right away:

    docker run -d --name fhem -p 8083:8083 docker pull ghcr.io/fhem/fhem/fhem-docker:buster

Storage

Usually you want to keep your FHEM setup after a container was destroyed (or re-build) so it is a good idea to provide an external directory on your Docker host to keep that data:

    docker run -d --name fhem -p 8083:8083 -v /some/host/directory:/opt/fhem docker pull ghcr.io/fhem/fhem/fhem-docker:buster

You will find more general information about using volumes from the Docker documentation for Use volumes and Bind mounts.

Access FHEM

After starting your container, you may now start your favorite browser to open one of FHEM's web interface variants like http://xxx.xxx.xxx.xxx:8083/.

You may want to have a look to the FHEM documentation sources for further information about how to use and configure FHEM.

Update strategy

Note that any existing FHEM installation you are mounting into the container will not be updated automatically, it is just the container and its system environment that can be updated by pulling a new FHEM Docker image. This is because the existing update philosophy is incompatible with the new and state-of-the-art approach of containerized application updates. That being said, consider the FHEM Docker image as a runtime environment for FHEM which is also capable to install FHEM for any new setup from scratch.

Customize your container configuration

Performance implications

The FHEM log file is mirrored to the Docker console output in order to give input for any Docker related tools. However, if the log file becomes too big, this will lead to some performance implications. For that reason, the default value of the global attribute logfile is different from the FHEM default configuration and set to a daily file (attr global logfile ./log/fhem-%Y-%m-%d.log).

It is highly recommended to keep this setting. Please note that FileLog devices might still need to be checked and adjusted manually if you would like to properly watch the log file from within FHEM.

Add custom packages

You may define several different types of packages to be installed automatically during initial start of the container by adding one of the following parameters to your container run command:

• Debian APT packages:

  -e APT_PKGS="package1 package2"

• Perl CPAN modules:

  -e CPAN_PKGS="App::Name1 App::Name2"

• Python PIP packages:

  -e PIP_PKGS="package1 package2"

• Node.js NPM packages:

  -e NPM_PKGS="package1 package2"

Directory and file permissions

For security and functional reasons, directory and file permissions for FHEM will be set during every container startup. That means that directories and files can only be opened by members of the $FHEM_GID user group or the $FHEM_UID user itself. Also, the execution bit for files is only kept for a limited set of file names and directories, which are:

• files named *.pl, *.py, *.sh
• every file that is stored in any directory named bin or sbin
• every file that is stored in any directory containing the string script in its name

Should you require any different permissions, you may read the next section to learn more about how to make any changes using custom pre start script /pre-start.sh or /docker/pre-start.sh.

Make any other changes during container start

In case you need to perform further changes to the container before it is ready for your FHEM instance to operate, there are a couple of entry points for your own scripts that will be run automatically if they are found at the right place. In order to achieve this, you need to mount the script file itself or a complete folder that contains that script to the respective destination inside your container. See Docker documentation about Use volumes and Bind mounts to learn how to achieve this in general.

If something needs to be done only once during the first start of a fresh container you just created, like after upgrading to a new version of the FHEM Docker Image, the *-init.sh scripts are the right place:

• /pre-init.sh, /docker/pre-init.sh

  This script will be run at the very beginning of the initialization of the new container, even before any custom packages will be installed.

• /post-init.sh, /docker/post-init.sh

  This script will be run at the very end of the initialization of the new container, also after your local FHEM configuration was checked and adjusted for compatibility with the container. Custom packages you defined using the environment variables mentioned above will be installed already at this point in time. This is likely the best place for you to do any final changes to the environment that need to be done only once for the lifetime of that container.

If something needs to be done every time you (re)start your container, the *-start.sh scripts are the right place:

• /pre-start.sh, /docker/pre-start.sh

  This script will be run every time the container starts, even before the FHEM Docker Image's own startup preparations. FHEM will not yet be running at this point in time.

• /post-start.sh, /docker/post-start.sh

  This script will be run every time the container starts and after the FHEM process was already started.

Role of the telnet device in FHEM

The Docker container will need to communicate with FHEM to shutdown nicely instead of just killing the process. For this to work properly, a telnet device is of paramount importance. Unless you are using configDB, the container will try to automatically detect and adjust your telnet configuration for it to work. If for any reason that fails or you are using configDB, it is your own obligation to configure such telnet device (define telnetPort telnet 7072). It may listen on the standard port 7072 or can be any other port (see environment variable TELNETPORT to re-configure it).

It is enough for the telnet device to only listen on the loopback device (aka localhost) but it cannot have any password protection enabled for loopback connections. If you require your telnet instance to listen for external connections, it is usually best-practice to set a password for it. In that case, make sure that any allowed device you might have configured for this purpose only requires a password for non-loopback connections (e.g. using attribute globalpassword instead of password - also see allowed commandref). The same applies when using the deprecated attribute password for the telnet device itself (see telnet commandref).

Docker health check control

The image comes with a built-in script to check availability and HTTP response codes of every FHEMWEB instance. It will also require a functional telnet device in your FHEM configuration (see Role of the telnet device in FHEM).

If for whatever reason you want to disable checking a specific FHEMWEB instance, you may set the user attribute DockerHealthCheck to 0 on that particular FHEMWEB device.

Note that the health check itself cannot be entirely disabled as it will ensure to notify you about any false telnet device configuration, hindering proper shutdown of FHEM when triggered by Docker or OS shutdown procedure.

Map USB devices to your container

1. Find out the USB device path/address from your Docker host machine first:

   lsusb -v | grep -E '\<(Bus|iProduct|bDeviceClass|bDeviceProtocol)' 2>/dev/null

2. You may then derive the device path from it and add the following parameter to your container run command:

   --device=/dev/bus/usb/001/002

Tweak container settings using environment variables

• Change FHEM logfile format: To set a different logfile path and format (default is ./log/fhem-%Y-%m-%d.log):

  -e LOGFILE=./log/fhem-%Y-%m-%d.log

• Change FHEM local Telnet port for health check and container restart handling: To set a different Telnet port for local connection during health check and container restart (default is 7072):

  -e TELNETPORT=7072

  Note that this is of paramount importance if you are running more than one instance in host network mode on the same server, otherwise the instances will interfere each other with their restart behaviours.

• Change FHEM system user ID: To set a different UID for the user fhem (default is 6061):

  -e FHEM_UID=6061

• Change FHEM group ID: To set a different GID for the group fhem (default is 6061):

  -e FHEM_GID=6061

• Change FHEM directory permissions: To set different directory permissions for $FHEM_DIR (default is 0750):

  -e FHEM_PERM_DIR=0750

• Change FHEM file permissions: To set different file permissions for $FHEM_DIR (default is 0640):

  -e FHEM_PERM_FILE=0640

• Change umask: To set a different umask for FHEM_UID (default is 0037):

      -e UMASK=0037
  

• Change Bluetooth group ID: To set a different GID for the group bluetooth (default is 6001):

  -e BLUETOOTH_GID=6001

• Change GPIO group ID: To set a different GID for the group gpio (default is 6002):

  -e GPIO_GID=6002

• Change I2C group ID: To set a different GID for the group i2c (default is 6003):

  -e I2C_GID=6003

• Change shutdown timeout: To set a different setting for the timer during FHEM shutdown handling, you may add this environment variable:

  -e TIMEOUT=10

• Set locale: For maximum compatibility, standard locale is set to US english with some refinements towards the European standards and German defaults. This may be changed according to your needs (also see Debian Wiki for more information):

  -e LANG=en_US.UTF-8
  -e LANGUAGE=en_US:en
  -e LC_ADDRESS=de_DE.UTF-8
  -e LC_MEASUREMENT=de_DE.UTF-8
  -e LC_MESSAGES=en_DK.UTF-8
  -e LC_MONETARY=de_DE.UTF-8
  -e LC_NAME=de_DE.UTF-8
  -e LC_NUMERIC=de_DE.UTF-8
  -e LC_PAPER=de_DE.UTF-8
  -e LC_TELEPHONE=de_DE.UTF-8
  -e LC_TIME=de_DE.UTF-8

• Set timezone: Set a specific timezone in POSIX format:

  -e TZ=Europe/Berlin

• Using configDB: Should you be using FHEM config type configDB, you need to change the FHEM configuration source for correct startup by setting the following environment variable:

  -e CONFIGTYPE=configDB

  Note that some essential global configuration that is affecting FHEM during startup is being enforced using FHEM_GLOBALATTR environment variable (nofork=0 and updateInBackground=1; logfile and pidfilename accordingly, based on environment variables LOGFILE and PIDFILE). These settings cannot be changed during runtime in FHEM and any setting that might be in your configDB configuration will be overwritten the next time you save your configuration. It might happen that FHEM will show you some warnings as part of the "message of the day" (motd attribute), stating that an attribute is read-only. That's okay, just clear that message and save your FHEM configuration at least once so the configuration is back in sync.

  Last but not least you need to make sure the telnet device configuration described above is correct.

• Starting the demo: To start the demo environment:

  -e CONFIGTYPE=fhem.cfg.demo

• Set Docker host IPv4 address for host.docker.internal:

  -e DOCKER_HOST=172.17.0.1

  If this variable is not present, host IP will automatically be detected based on the subnet network gateway (also see variable DOCKER_GW below). In case the container is running in network host network mode, host.docker.internal is set to 127.0.127.2 to allow loopback network connectivity. host.docker.internal will also be evaluated automatically for SSH connection on port 22 by adding the servers public key to /opt/fhem/.ssh/known_hosts so that unattended connectivity for scripts is available.

• Set Docker gateway IPv4 address for gateway.docker.internal:

  -e DOCKER_GW=172.17.0.1

  If this variable is not present, the gateway will automatically be detected.

• Manipulating software in the container using their own environment variables: For security reasons, only allowed environment variables are passed to the FHEM user environment. To control certain behaviours of Perl, Node.js and Python, those language interpreters come with their own environment variables. Any variable that was set for the container and with a prefix of either PERL, NODE or PYTHON is exported to the FHEM user environment so it is available there during runtime of the fhem.pl main process and subsequently all its child processes.

Further tweaks for your FHEM configuration

Connect to Docker host from within container

If you would like to connect to a service that is running on your Docker host itself or to a container that is running in host network mode, you may use the following DNS alias names that are automatically being added to /etc/hosts during container bootup:

• gateway.docker.internal
• host.docker.internal

That is, if you did not configure those in your local DNS, of course.

In case the container is running in host network mode, the host IP address will be set to 127.0.127.2 as an alias for 'localhost'. That means a service you would like to reach needs to listen on the loopback interface as well. If a service you would like to reach is only listening on a particular IP address or interface instead, you need to set the environment variable DOCKER_HOST to the respective IP address as there is no way for the FHEM Docker Image to automatically detect what you need. When running in host network mode, the gateway will reflect your actual network segment gateway IP address.

Also, for host.docker.internal, the SSH host key will automatically be added and updated in /opt/fhem/.ssh/known_hosts so that FHEM modules and other scripts can automatically connect without any further configuration effort. Note that the SSH client keys that FHEM will use to authenticate itself are shown as readings in the DockerImageInfo device in FHEM. You may copy & paste those to the destination host into the respective destination user home directory with filename ~/.ssh/authorized_keys.

If for some reason the host details are not detected correctly, you may overwrite the IP addresses using environment variables (see DOCKER_HOST and DOCKER_GW above).

Adding Git for version control of your Home Automation Docker containers

Prerequisites on your Docker host:

1. Ensure docker-compose is installed: See Install Docker Compose
2. Ensure Git command is installed, e.g. run sudo apt install git

Follow initial setup steps:

1. Put docker-compose.yml and .gitignore into an empty sub-folder, e.g. /docker/home

   sudo mkdir -p /docker/home
   sudo curl -fsSL -o /docker/home/docker-compose.yml https://github.com/fhem/fhem-docker/raw/master/docker-compose.yml
   sudo curl -fsSL -o /docker/home/.gitignore https://github.com/fhem/fhem-docker/raw/master/.gitignore

   Note that the sub-directory "home" will be the base prefix name for all your Docker containers (e.g. resulting in home_SERVICE_1). This will also help to run multiple instances of your Stack on the same host, e.g. to separate production environment in /docker/home from development in /docker/home-dev.

2. Being in /docker/home, run command to start your Docker stack:

   cd /docker/home; sudo docker-compose up -d

   All FHEM files including your individual configuration and changes will be stored in ./fhem/ . You may also put an existing FHEM installation into ./fhem/ before the initial start, it will be automatically updated for compatibility with fhem-docker. Note that if you are using configDB already, you need to ensure Docker compatibility before starting the container for the very first time (see DOCKER_* environment variables above).

3. Create a local Git repository and add all files as an initial commit:

   cd /docker/home
   sudo git init
   sudo git add -A
   sudo git commit -m "Initial commit"

   Run the following command whenever you would like to mark changes as permanent:

   cd /docker/home; sudo git add -A; sudo git commit -m "FHEM update"

   Note: This will also add any new files within your whole Docker Stack outside of the ./fhem/ folder. Please see Git documentation for details and further commands.

4. Optional - Add remote repository for external backup. It is strongly recommended to have your external repository set to private before doing so:

   sudo git remote add origin [email protected]:user/repo.git
   sudo git push --force --set-upstream origin master

   Note that after updating your local repository as described above, you also want to push those changes to the remote server:

   cd /docker/home; sudo git push

   To restore your Docker Stack from remote Git backup on a fresh Docker host installation:

   sudo mkdir -p /docker
   cd /docker; sudo git clone [email protected]:user/repo.git
   cd /docker/home; sudo docker-compose up -d