Authorization error for root:password token #684
Comments
|
I can login with token. I will test root later. |
|
this might be zilliz cloud does attu uses Bearer Token authorization or Basic credentials authorization |
Yeah, I will test open source Milvus soon. There is nothing to do with Attu connects Milvus with node sdk, which is fully tested, I don't think it will have a issue about this. |
|
I dont'nt know but using the nodesdk to connect to milvus standalone with username password works for my app but one thing is confirm on fresh installation of standalone security:
authorizationEnabled: truewithout change the default password |
|
Here is my working docker-compose and milvus config version: '3.5'
services:
etcd:
container_name: milvus-etcd
image: quay.io/coreos/etcd:v3.5.5
environment:
- ETCD_AUTO_COMPACTION_MODE=revision
- ETCD_AUTO_COMPACTION_RETENTION=1000
- ETCD_QUOTA_BACKEND_BYTES=4294967296
- ETCD_SNAPSHOT_COUNT=50000
volumes:
- /Users/zilliz/workspace/volumes/etcd:/etcd
command: etcd -advertise-client-urls=http://127.0.0.1:2379 -listen-client-urls http://0.0.0.0:2379 --data-dir /etcd
healthcheck:
test: ["CMD", "etcdctl", "endpoint", "health"]
interval: 30s
timeout: 20s
retries: 3
minio:
container_name: milvus-minio
image: minio/minio:RELEASE.2023-03-20T20-16-18Z
environment:
MINIO_ACCESS_KEY: minioadmin
MINIO_SECRET_KEY: minioadmin
ports:
- "9001:9001"
- "9000:9000"
volumes:
- /Users/zilliz/workspace/volumes/minio:/minio_data
command: minio server /minio_data --console-address ":9001"
healthcheck:
test: ["CMD", "curl", "-f", "http://localhost:9000/minio/health/live"]
interval: 30s
timeout: 20s
retries: 3
standalone:
container_name: milvus-standalone
image: milvusdb/milvus:v2.4.15
command: ["milvus", "run", "standalone"]
security_opt:
- seccomp:unconfined
environment:
ETCD_ENDPOINTS: etcd:2379
MINIO_ADDRESS: minio:9000
volumes:
- /Users/zilliz/workspace/volumes/milvus.yaml:/milvus/configs/milvus.yaml
- /Users/zilliz/workspace/volumes/milvus:/var/lib/milvus
healthcheck:
test: ["CMD", "curl", "-f", "http://localhost:9091/healthz"]
interval: 30s
start_period: 90s
timeout: 20s
retries: 3
ports:
- "19530:19530"
- "9091:9091"
depends_on:
- "etcd"
- "minio"
networks:
default:
name: milvus# Licensed to the LF AI & Data foundation under one
# or more contributor license agreements. See the NOTICE file
# distributed with this work for additional information
# regarding copyright ownership. The ASF licenses this file
# to you under the Apache License, Version 2.0 (the
# "License"); you may not use this file except in compliance
# with the License. You may obtain a copy of the License at
#
# http://www.apache.org/licenses/LICENSE-2.0
#
# Unless required by applicable law or agreed to in writing, software
# distributed under the License is distributed on an "AS IS" BASIS,
# WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
# See the License for the specific language governing permissions and
# limitations under the License.
# Related configuration of etcd, used to store Milvus metadata & service discovery.
etcd:
endpoints:
- localhost:2379
rootPath: by-dev # The root path where data is stored in etcd
metaSubPath: meta # metaRootPath = rootPath + '/' + metaSubPath
kvSubPath: kv # kvRootPath = rootPath + '/' + kvSubPath
log:
# path is one of:
# - "default" as os.Stderr,
# - "stderr" as os.Stderr,
# - "stdout" as os.Stdout,
# - file path to append server logs to.
# please adjust in embedded Milvus: /tmp/milvus/logs/etcd.log
path: stdout
level: info # Only supports debug, info, warn, error, panic, or fatal. Default 'info'.
use:
# please adjust in embedded Milvus: true
embed: false # Whether to enable embedded Etcd (an in-process EtcdServer).
data:
# Embedded Etcd only.
# please adjust in embedded Milvus: /tmp/milvus/etcdData/
dir: default.etcd
ssl:
enabled: false # Whether to support ETCD secure connection mode
tlsCert: /path/to/etcd-client.pem # path to your cert file
tlsKey: /path/to/etcd-client-key.pem # path to your key file
tlsCACert: /path/to/ca.pem # path to your CACert file
# TLS min version
# Optional values: 1.0, 1.1, 1.2, 1.3。
# We recommend using version 1.2 and above
tlsMinVersion: 1.3
# Default value: etcd
# Valid values: [etcd, mysql]
metastore:
type: etcd
# Related configuration of mysql, used to store Milvus metadata.
mysql:
username: root
password: 123456
address: localhost
port: 3306
dbName: milvus_meta
driverName: mysql
maxOpenConns: 20
maxIdleConns: 5
# please adjust in embedded Milvus: /tmp/milvus/data/
localStorage:
path: /var/lib/milvus/data/
# Related configuration of MinIO/S3/GCS or any other service supports S3 API, which is responsible for data persistence for Milvus.
# We refer to the storage service as MinIO/S3 in the following description for simplicity.
minio:
address: localhost # Address of MinIO/S3
port: 9000 # Port of MinIO/S3
accessKeyID: minioadmin # accessKeyID of MinIO/S3
secretAccessKey: minioadmin # MinIO/S3 encryption string
useSSL: false # Access to MinIO/S3 with SSL
bucketName: "a-bucket" # Bucket name in MinIO/S3
rootPath:
files # The root path where the message is stored in MinIO/S3
# Whether to use IAM role to access S3/GCS instead of access/secret keys
# For more infomation, refer to
# aws: https://docs.aws.amazon.com/IAM/latest/UserGuide/id_roles_use.html
# gcp: https://cloud.google.com/storage/docs/access-control/iam
# aliyun (ack): https://www.alibabacloud.com/help/en/container-service-for-kubernetes/latest/use-rrsa-to-enforce-access-control
# aliyun (ecs): https://www.alibabacloud.com/help/en/elastic-compute-service/latest/attach-an-instance-ram-role
useIAM: false
# Cloud Provider of S3. Supports: "aws", "gcp", "aliyun".
# You can use "aws" for other cloud provider supports S3 API with signature v4, e.g.: minio
# You can use "gcp" for other cloud provider supports S3 API with signature v2
# You can use "aliyun" for other cloud provider uses virtual host style bucket
# When useIAM enabled, only "aws", "gcp", "aliyun" is supported for now
cloudProvider: aws
# Custom endpoint for fetch IAM role credentials. when useIAM is true & cloudProvider is "aws".
# Leave it empty if you want to use AWS default endpoint
iamEndpoint: ""
# Milvus supports three MQ: rocksmq(based on RockDB), Pulsar and Kafka, which should be reserved in config what you use.
# There is a note about enabling priority if we config multiple mq in this file
# 1. standalone(local) mode: rockskmq(default) > Pulsar > Kafka
# 2. cluster mode: Pulsar(default) > Kafka (rocksmq is unsupported)
# Related configuration of pulsar, used to manage Milvus logs of recent mutation operations, output streaming log, and provide log publish-subscribe services.
pulsar:
address: localhost # Address of pulsar
port: 6650 # Port of pulsar
webport: 80 # Web port of pulsar, if you connect direcly without proxy, should use 8080
maxMessageSize: 5242880 # 5 * 1024 * 1024 Bytes, Maximum size of each message in pulsar.
tenant: public
namespace: default
# If you want to enable kafka, needs to comment the pulsar configs
kafka:
producer:
client.id: dc
consumer:
client.id: dc1
# brokerList: localhost1:9092,localhost2:9092,localhost3:9092
# saslUsername: username
# saslPassword: password
# saslMechanisms: PLAIN
# securityProtocol: SASL_SSL
rocksmq:
# please adjust in embedded Milvus: /tmp/milvus/rdb_data
path: /var/lib/milvus/rdb_data # The path where the message is stored in rocksmq
rocksmqPageSize: 67108864 # 64 MB, 64 * 1024 * 1024 bytes, The size of each page of messages in rocksmq
retentionTimeInMinutes: 4320 # 3 days, 3 * 24 * 60 minutes, The retention time of the message in rocksmq.
retentionSizeInMB: 8192 # 8 GB, 8 * 1024 MB, The retention size of the message in rocksmq.
compactionInterval: 86400 # 1 day, trigger rocksdb compaction every day to remove deleted data
lrucacheratio: 0.06 # rocksdb cache memory ratio
# Related configuration of rootCoord, used to handle data definition language (DDL) and data control language (DCL) requests
rootCoord:
address: localhost
port: 53100
enableActiveStandby: false # Enable active-standby
dmlChannelNum: 16 # The number of dml channels created at system startup
maxDatabaseNum: 64 # Maximum number of database
maxPartitionNum: 4096 # Maximum number of partitions in a collection
minSegmentSizeToEnableIndex: 1024 # It's a threshold. When the segment size is less than this value, the segment will not be indexed
# (in seconds) Duration after which an import task will expire (be killed). Default 900 seconds (15 minutes).
# Note: If default value is to be changed, change also the default in: internal/util/paramtable/component_param.go
importTaskExpiration: 900
# (in seconds) Milvus will keep the record of import tasks for at least `importTaskRetention` seconds. Default 86400
# seconds (24 hours).
# Note: If default value is to be changed, change also the default in: internal/util/paramtable/component_param.go
importTaskRetention: 86400
# Related configuration of proxy, used to validate client requests and reduce the returned results.
proxy:
port: 19530
internalPort: 19529
http:
enabled: true # Whether to enable the http server
debug_mode: false # Whether to enable http server debug mode
timeTickInterval: 200 # ms, the interval that proxy synchronize the time tick
msgStream:
timeTick:
bufSize: 512
maxNameLength: 255 # Maximum length of name for a collection or alias
maxFieldNum: 64 # Maximum number of fields in a collection.
# As of today (2.2.0 and after) it is strongly DISCOURAGED to set maxFieldNum >= 64.
# So adjust at your risk!
maxDimension: 32768 # Maximum dimension of a vector
# It's strongly DISCOURAGED to set `maxShardNum` > 64.
maxShardNum: 16 # Maximum number of shards in a collection
maxTaskNum: 1024 # max task number of proxy task queue
# please adjust in embedded Milvus: false
ginLogging: true # Whether to produce gin logs.
grpc:
serverMaxRecvSize: 67108864 # 64M
serverMaxSendSize: 67108864 # 64M
clientMaxRecvSize: 104857600 # 100 MB, 100 * 1024 * 1024
clientMaxSendSize: 104857600 # 100 MB, 100 * 1024 * 1024
# Related configuration of queryCoord, used to manage topology and load balancing for the query nodes, and handoff from growing segments to sealed segments.
queryCoord:
address: localhost
port: 19531
autoHandoff: true # Enable auto handoff
autoBalance: true # Enable auto balance
balancer: ScoreBasedBalancer # Balancer to use
globalRowCountFactor: 0.1 # expert parameters, only used by scoreBasedBalancer
scoreUnbalanceTolerationFactor: 0.05 # expert parameters, only used by scoreBasedBalancer
reverseUnBalanceTolerationFactor: 1.3 #expert parameters, only used by scoreBasedBalancer
overloadedMemoryThresholdPercentage: 90 # The threshold percentage that memory overload
balanceIntervalSeconds: 60
memoryUsageMaxDifferencePercentage: 30
checkInterval: 10000
channelTaskTimeout: 60000 # 1 minute
segmentTaskTimeout: 120000 # 2 minute
distPullInterval: 500
loadTimeoutSeconds: 1800
checkHandoffInterval: 5000
taskMergeCap: 8
taskExecutionCap: 256
enableActiveStandby: false # Enable active-standby
refreshTargetsIntervalSeconds: 300
# Related configuration of queryNode, used to run hybrid search between vector and scalar data.
queryNode:
cacheSize: 32 # GB, default 32 GB, `cacheSize` is the memory used for caching data for faster query. The `cacheSize` must be less than system memory size.
port: 21123
loadMemoryUsageFactor: 3 # The multiply factor of calculating the memory usage while loading segments
enableDisk: true # enable querynode load disk index, and search on disk index
maxDiskUsagePercentage: 95
gracefulStopTimeout: 30
stats:
publishInterval: 1000 # Interval for querynode to report node information (milliseconds)
dataSync:
flowGraph:
maxQueueLength: 1024 # Maximum length of task queue in flowgraph
maxParallelism: 1024 # Maximum number of tasks executed in parallel in the flowgraph
# Segcore will divide a segment into multiple chunks to enbale small index
segcore:
chunkRows: 1024 # The number of vectors in a chunk.
knowhereThreadPoolNumRatio: 4 # Use more threads to make good use of SSD throughput
# Note: we have disabled segment small index since @2022.05.12. So below related configurations won't work.
# We won't create small index for growing segments and search on these segments will directly use bruteforce scan.
smallIndex:
nlist: 128 # small index nlist, recommend to set sqrt(chunkRows), must smaller than chunkRows/8
nprobe: 16 # nprobe to search small index, based on your accuracy requirement, must smaller than nlist
cache:
enabled: true
memoryLimit: 2147483648 # 2 GB, 2 * 1024 *1024 *1024
scheduler:
receiveChanSize: 10240
unsolvedQueueSize: 10240
# maxReadConcurrentRatio is the concurrency ratio of read task (search task and query task).
# Max read concurrency would be the value of `runtime.NumCPU * maxReadConcurrentRatio`.
# It defaults to 2.0, which means max read concurrency would be the value of runtime.NumCPU * 2.
# Max read concurrency must greater than or equal to 1, and less than or equal to runtime.NumCPU * 100.
maxReadConcurrentRatio: 2.0 # (0, 100]
cpuRatio: 10.0 # ratio used to estimate read task cpu usage.
# maxTimestampLag is the max ts lag between serviceable and guarantee timestamp.
# if the lag is larger than this config, scheduler will return error without waiting.
# the valid value is [3600, infinite)
maxTimestampLag: 86400
# read task schedule policy: fifo(by default), user-task-polling.
scheduleReadPolicy:
# fifo: A FIFO queue support the schedule.
# user-task-polling:
# The user's tasks will be polled one by one and scheduled.
# Scheduling is fair on task granularity.
# The policy is based on the username for authentication.
# And an empty username is considered the same user.
# When there are no multi-users, the policy decay into FIFO
name: fifo
# user-task-polling configure:
taskQueueExpire: 60 # 1 min by default, expire time of inner user task queue since queue is empty.
grouping:
enabled: true
maxNQ: 50000
topKMergeRatio: 10.0
indexCoord:
address: localhost
port: 31000
enableActiveStandby: false # Enable active-standby
minSegmentNumRowsToEnableIndex: 1024 # It's a threshold. When the segment num rows is less than this value, the segment will not be indexed
bindIndexNodeMode:
enable: false
address: "localhost:22930"
withCred: false
nodeID: 0
gc:
interval: 600 # gc interval in seconds
scheduler:
interval: 1000 # scheduler interval in Millisecond
indexNode:
port: 21121
enableDisk: true # enable index node build disk vector index
maxDiskUsagePercentage: 95
gracefulStopTimeout: 30
scheduler:
buildParallel: 1
dataCoord:
address: localhost
port: 13333
enableCompaction: true # Enable data segment compaction
enableGarbageCollection: true
enableActiveStandby: false # Enable active-standby
channel:
watchTimeoutInterval: 120 # Timeout on watching channels (in seconds). Datanode tickler update watch progress will reset timeout timer.
balanceSilentDuration: 300 # The duration before the channelBalancer on datacoord to run
balanceInterval: 360 #The interval for the channelBalancer on datacoord to check balance status
segment:
maxSize: 512 # Maximum size of a segment in MB
diskSegmentMaxSize: 2048 # Maximun size of a segment in MB for collection which has Disk index
# Minimum proportion for a segment which can be sealed.
# Sealing early can prevent producing large growing segments in case these segments might slow down our search/query.
# Segments that sealed early will be compacted into a larger segment (within maxSize) eventually.
sealProportion: 0.23
assignmentExpiration: 2000 # The time of the assignment expiration in ms
maxLife: 86400 # The max lifetime of segment in seconds, 24*60*60
# If a segment didn't accept dml records in `maxIdleTime` and the size of segment is greater than
# `minSizeFromIdleToSealed`, Milvus will automatically seal it.
maxIdleTime: 600 # The max idle time of segment in seconds, 10*60.
minSizeFromIdleToSealed: 16 # The min size in MB of segment which can be idle from sealed.
# The max number of binlog file for one segment, the segment will be sealed if
# the number of binlog file reaches to max value.
maxBinlogFileNumber: 32
smallProportion: 0.5 # The segment is considered as "small segment" when its # of rows is smaller than
# (smallProportion * segment max # of rows).
compactableProportion: 0.85 # A compaction will happen on small segments if the segment after compaction will have
# over (compactableProportion * segment max # of rows) rows.
# MUST BE GREATER THAN OR EQUAL TO <smallProportion>!!!
expansionRate: 1.25 # During compaction, the size of segment # of rows is able to exceed segment max # of rows by (expansionRate-1) * 100%.
compaction:
enableAutoCompaction: true
gc:
interval: 3600 # gc interval in seconds
missingTolerance: 86400 # file meta missing tolerance duration in seconds, 60*24
dropTolerance: 3600 # file belongs to dropped entity tolerance duration in seconds
dataNode:
port: 21124
dataSync:
flowGraph:
maxQueueLength: 1024 # Maximum length of task queue in flowgraph
maxParallelism: 1024 # Maximum number of tasks executed in parallel in the flowgraph
maxParallelSyncTaskNum: 2 # Maximum number of sync tasks executed in parallel in each flush manager
segment:
# Max buffer size to flush for a single segment.
insertBufSize: 16777216 # Bytes, 16 MB
# Max buffer size to flush del for a single channel
deleteBufBytes: 67108864 # Bytes, 64MB
# The period to sync segments if buffer is not empty.
syncPeriod: 600 # Seconds, 10min
memory:
forceSyncEnable: true # `true` to force sync if memory usage is too high
forceSyncSegmentNum: 1 # number of segments to sync, segments with top largest buffer will be synced.
watermarkStandalone: 0.2 # memory watermark for standalone, upon reaching this watermark, segments will be synced.
watermarkCluster: 0.5 # memory watermark for cluster, upon reaching this watermark, segments will be synced.
# Configures the system log output.
log:
level: debug # Only supports debug, info, warn, error, panic, or fatal. Default 'info'.
stdout: "true" # default true, print log to stdout
file:
# please adjust in embedded Milvus: /tmp/milvus/logs
rootPath: "" # root dir path to put logs, default "" means no log file will print
maxSize: 300 # MB
maxAge: 10 # Maximum time for log retention in day.
maxBackups: 20
format: text # text/json
grpc:
log:
level: WARNING
serverMaxRecvSize: 536870912 # 512MB
serverMaxSendSize: 536870912 # 512MB
clientMaxRecvSize: 104857600 # 100 MB, 100 * 1024 * 1024
clientMaxSendSize: 104857600 # 100 MB, 100 * 1024 * 1024
client:
dialTimeout: 200
keepAliveTime: 10000
keepAliveTimeout: 20000
maxMaxAttempts: 5
initialBackOff: 1.0
maxBackoff: 60.0
backoffMultiplier: 2.0
server:
retryTimes: 5 # retry times when receiving a grpc return value with a failure and retryable state code
# Configure the proxy tls enable.
tls:
serverPemPath: configs/cert/server.pem
serverKeyPath: configs/cert/server.key
caPemPath: configs/cert/ca.pem
common:
# Channel name generation rule: ${namePrefix}-${ChannelIdx}
chanNamePrefix:
cluster: "by-dev"
rootCoordTimeTick: "rootcoord-timetick"
rootCoordStatistics: "rootcoord-statistics"
rootCoordDml: "rootcoord-dml"
rootCoordDelta: "rootcoord-delta"
search: "search"
searchResult: "searchResult"
queryTimeTick: "queryTimeTick"
queryNodeStats: "query-node-stats"
# Cmd for loadIndex, flush, etc...
cmd: "cmd"
dataCoordStatistic: "datacoord-statistics-channel"
dataCoordTimeTick: "datacoord-timetick-channel"
dataCoordSegmentInfo: "segment-info-channel"
# Sub name generation rule: ${subNamePrefix}-${NodeID}
subNamePrefix:
rootCoordSubNamePrefix: "rootCoord"
proxySubNamePrefix: "proxy"
queryNodeSubNamePrefix: "queryNode"
dataNodeSubNamePrefix: "dataNode"
dataCoordSubNamePrefix: "dataCoord"
defaultPartitionName: "_default" # default partition name for a collection
defaultIndexName: "_default_idx" # default index name
retentionDuration: 0 # time travel reserved time, insert/delete will not be cleaned in this period. disable it by default
entityExpiration: -1 # Entity expiration in seconds, CAUTION make sure entityExpiration >= retentionDuration and -1 means never expire
gracefulTime: 5000 # milliseconds. it represents the interval (in ms) by which the request arrival time needs to be subtracted in the case of Bounded Consistency.
gracefulStopTimeout: 30 # seconds. it will force quit the server if the graceful stop process is not completed during this time.
# Default value: auto
# Valid values: [auto, avx512, avx2, avx, sse4_2]
# This configuration is only used by querynode and indexnode, it selects CPU instruction set for Searching and Index-building.
simdType: auto
indexSliceSize: 16 # MB
DiskIndex:
MaxDegree: 56
SearchListSize: 100
PQCodeBudgetGBRatio: 0.125
BuildNumThreadsRatio: 1.0
SearchCacheBudgetGBRatio: 0.10
LoadNumThreadRatio: 8.0
BeamWidthRatio: 4.0
# This parameter specify how many times the number of threads is the number of cores
threadCoreCoefficient: 10
# please adjust in embedded Milvus: local
storageType: minio
security:
authorizationEnabled: true
# The superusers will ignore some system check processes,
# like the old password verification when updating the credential
superUsers:
- "root"
# tls mode values [0, 1, 2]
# 0 is close, 1 is one-way authentication, 2 is two-way authentication.
tlsMode: 0
session:
ttl: 20 # ttl value when session granting a lease to register service
retryTimes: 30 # retry times when session sending etcd requests
ImportMaxFileSize: 17179869184 # 16 * 1024 * 1024 * 1024
# max file size to import for bulkInsert
# QuotaConfig, configurations of Milvus quota and limits.
# By default, we enable:
# 1. TT protection;
# 2. Memory protection.
# 3. Disk quota protection.
# You can enable:
# 1. DML throughput limitation;
# 2. DDL, DQL qps/rps limitation;
# 3. DQL Queue length/latency protection;
# 4. DQL result rate protection;
# If necessary, you can also manually force to deny RW requests.
quotaAndLimits:
enabled: true # `true` to enable quota and limits, `false` to disable.
limits:
maxCollectionNum: 65536
maxCollectionNumPerDB: 65536
# quotaCenterCollectInterval is the time interval that quotaCenter
# collects metrics from Proxies, Query cluster and Data cluster.
quotaCenterCollectInterval: 3 # seconds, (0 ~ 65536)
ddl: # ddl limit rates, default no limit.
enabled: false
collectionRate: -1 # qps, default no limit, rate for CreateCollection, DropCollection, LoadCollection, ReleaseCollection
partitionRate: -1 # qps, default no limit, rate for CreatePartition, DropPartition, LoadPartition, ReleasePartition
indexRate:
enabled: false
max: -1 # qps, default no limit, rate for CreateIndex, DropIndex
flushRate:
enabled: false
max: -1 # qps, default no limit, rate for flush
compactionRate:
enabled: false
max: -1 # qps, default no limit, rate for manualCompaction
# dml limit rates, default no limit.
# The maximum rate will not be greater than `max`.
dml:
enabled: false
insertRate:
collection:
max: -1 # MB/s, default no limit
max: -1 # MB/s, default no limit
deleteRate:
collection:
max: -1 # MB/s, default no limit
max: -1 # MB/s, default no limit
bulkLoadRate: # not support yet. TODO: limit bulkLoad rate
collection:
max: -1 # MB/s, default no limit
max: -1 # MB/s, default no limit
# dql limit rates, default no limit.
# The maximum rate will not be greater than `max`.
dql:
enabled: false
searchRate:
collection:
max: -1 # vps (vectors per second), default no limit
max: -1 # vps (vectors per second), default no limit
queryRate:
collection:
max: -1 # qps, default no limit
max: -1 # qps, default no limit
# limitWriting decides whether dml requests are allowed.
limitWriting:
# forceDeny `false` means dml requests are allowed (except for some
# specific conditions, such as memory of nodes to water marker), `true` means always reject all dml requests.
forceDeny: false
ttProtection:
enabled: false
# maxTimeTickDelay indicates the backpressure for DML Operations.
# DML rates would be reduced according to the ratio of time tick delay to maxTimeTickDelay,
# if time tick delay is greater than maxTimeTickDelay, all DML requests would be rejected.
maxTimeTickDelay: 300 # in seconds
memProtection:
enabled: true
# When memory usage > memoryHighWaterLevel, all dml requests would be rejected;
# When memoryLowWaterLevel < memory usage < memoryHighWaterLevel, reduce the dml rate;
# When memory usage < memoryLowWaterLevel, no action.
# memoryLowWaterLevel should be less than memoryHighWaterLevel.
dataNodeMemoryLowWaterLevel: 0.85 # (0, 1], memoryLowWaterLevel in DataNodes
dataNodeMemoryHighWaterLevel: 0.95 # (0, 1], memoryHighWaterLevel in DataNodes
queryNodeMemoryLowWaterLevel: 0.85 # (0, 1], memoryLowWaterLevel in QueryNodes
queryNodeMemoryHighWaterLevel: 0.95 # (0, 1], memoryHighWaterLevel in QueryNodes
growingSegmentsSizeProtection:
# 1. No action will be taken if the ratio of growing segments size is less than the low water level.
# 2. The DML rate will be reduced if the ratio of growing segments size is greater than the low water level and less than the high water level.
# 3. All DML requests will be rejected if the ratio of growing segments size is greater than the high water level.
enabled: false
lowWaterLevel: 0.2
highWaterLevel: 0.4
diskProtection:
# When the total file size of object storage is greater than `diskQuota`, all dml requests would be rejected;
enabled: true
diskQuota: -1 # MB, (0, +inf), default no limit
diskQuotaPerCollection: -1 # MB, (0, +inf), default no limit
# limitReading decides whether dql requests are allowed.
limitReading:
# forceDeny `false` means dql requests are allowed (except for some
# specific conditions, such as collection has been dropped), `true` means always reject all dql requests.
forceDeny: false
queueProtection:
enabled: false
# nqInQueueThreshold indicated that the system was under backpressure for Search/Query path.
# If NQ in any QueryNode's queue is greater than nqInQueueThreshold, search&query rates would gradually cool off
# until the NQ in queue no longer exceeds nqInQueueThreshold. We think of the NQ of query request as 1.
nqInQueueThreshold: -1 # int, default no limit
# queueLatencyThreshold indicated that the system was under backpressure for Search/Query path.
# If dql latency of queuing is greater than queueLatencyThreshold, search&query rates would gradually cool off
# until the latency of queuing no longer exceeds queueLatencyThreshold.
# The latency here refers to the averaged latency over a period of time.
queueLatencyThreshold: -1 # milliseconds, default no limit
resultProtection:
enabled: false
# maxReadResultRate indicated that the system was under backpressure for Search/Query path.
# If dql result rate is greater than maxReadResultRate, search&query rates would gradually cool off
# until the read result rate no longer exceeds maxReadResultRate.
maxReadResultRate: -1 # MB/s, default no limit
# coolOffSpeed is the speed of search&query rates cool off.
coolOffSpeed: 0.9 # (0, 1]
autoIndex:
params:
build: '{"M": 18,"efConstruction": 240,"index_type": "HNSW", "metric_type": "IP"}'
|
|
|
1 task
|
I think this issue happens if the milvus root password is 100 chars long on milvus standalone |
How can you set 100chars long password |
|
By setting it in the milvus config file on fresh startup as root password
*- Khalid*
…On Wed, 13 Nov 2024 at 4:30 PM ryjiang ***@***.***> wrote:
I think this issue happens if the milvus root password is 100 chars long
on milvus standalone
image.png (view on web)
<https://github.com/user-attachments/assets/5447b088-7d35-444c-93cc-99e69cdc51fc>
How can you set 100chars long password
—
Reply to this email directly, view it on GitHub
<#684 (comment)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AGS5WW4BYFOAL7EQBDUNPWT2AMZ6FAVCNFSM6AAAAABRM2OQFSVHI2DSMVQWIX3LMV43OSLTON2WKQ3PNVWWK3TUHMZDINZTGMYDKOJVHE>
.
You are receiving this because you authored the thread.Message ID:
***@***.***>
|
Sign up for free
to join this conversation on GitHub.
Already have an account?
Sign in to comment
Describe the bug:
milvus-io/milvus#36987
The text was updated successfully, but these errors were encountered: