diff --git a/boards/lilygo/ttgo_lora32/doc/index.rst b/boards/lilygo/ttgo_lora32/doc/index.rst
index c7a04423e905ecb..bb5fb2df4fbc0a9 100644
--- a/boards/lilygo/ttgo_lora32/doc/index.rst
+++ b/boards/lilygo/ttgo_lora32/doc/index.rst
@@ -49,13 +49,13 @@ of the Lilygo TTGO LoRa32 board.
 +------------------+-------------------------------------------------------------------------+
 | Power Switch     | Sliding power switch.                                                   |
 +------------------+-------------------------------------------------------------------------+
-| LCD screen       | Built-in OLED display \(`SSD1306`_, 0.96", 128x64 px\) controlled       |
+| OLED display     | Built-in OLED display \(`SSD1306`_, 0.96", 128x64 px\) controlled       |
 |                  | by I2C interface                                                        |
 +------------------+-------------------------------------------------------------------------+
 | SX1276/SX1278    | LoRa radio frontend chip, connected via SPI.                            |
 |                  | Use SX1276 for 433MHz and SX1276 for 868/915/923MHz.                    |
 +------------------+-------------------------------------------------------------------------+
-| TF card slot     | TF card slot wired to the SD interface of the MCU.                      |
+| TF card slot     | TF card slot wired to the SDHC interface of the MCU.                    |
 +------------------+-------------------------------------------------------------------------+
 
 
@@ -205,7 +205,7 @@ message in the monitor:
    ***** Booting Zephyr OS vx.x.x-xxx-gxxxxxxxxxxxx *****
    Hello World! ttgo_lora32
 
-LoRa samples
+Code samples
 ============
 
 There are two LoRa samples that will work out of the box with this board.
@@ -230,6 +230,26 @@ To build the LoRa receive sample application using sysbuild use the command:
    :west-args: --sysbuild
    :compact:
 
+The following sample application lists the contents of the SD card:
+
+.. zephyr-app-commands::
+   :tool: west
+   :zephyr-app: samples/subsys/fs/fs_sample
+   :board: ttgo_lora32/esp32/procpu
+   :goals: build
+   :west-args: --sysbuild
+   :compact:
+
+The following sample application displays numbers on the OLED display:
+
+.. zephyr-app-commands::
+   :tool: west
+   :zephyr-app: samples/subsys/display/cfb
+   :board: ttgo_lora32/esp32/procpu
+   :goals: build
+   :west-args: --sysbuild
+   :compact:
+
 Debugging
 *********
 
diff --git a/boards/lilygo/ttgo_lora32/ttgo_lora32-pinctrl.dtsi b/boards/lilygo/ttgo_lora32/ttgo_lora32-pinctrl.dtsi
index 5f043ddb945d676..eaa3e9b422b5158 100644
--- a/boards/lilygo/ttgo_lora32/ttgo_lora32-pinctrl.dtsi
+++ b/boards/lilygo/ttgo_lora32/ttgo_lora32-pinctrl.dtsi
@@ -41,5 +41,11 @@
 			output-high;
 		};
 	};
-
+	sdhc0_default: sdhc0_default {
+		group1 {
+			pinmux = <SDHC0_CD_GPIO34>;
+			bias-pull-up;
+			output-high;
+		};
+	};
 };
diff --git a/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_appcpu.yaml b/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_appcpu.yaml
index f048566726012b4..0ab1a0e6182b0ea 100644
--- a/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_appcpu.yaml
+++ b/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_appcpu.yaml
@@ -24,4 +24,5 @@ testing:
     - cmsis_rtos
     - jwt
     - zdsp
+    - sdhc
 vendor: lilygo
diff --git a/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu.dts b/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu.dts
index d8dfad087e3e97c..9d4da1c1fca26ea 100644
--- a/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu.dts
+++ b/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu.dts
@@ -18,6 +18,7 @@
 		uart-0 = &uart0;
 		i2c-0 = &i2c0;
 		watchdog0 = &wdt0;
+		sdhc0 = &sdhc1;
 		lora0 = &lora0;
 	};
 
@@ -28,6 +29,7 @@
 		zephyr,flash = &flash0;
 		zephyr,code-partition = &slot0_partition;
 		zephyr,display = &ssd1306_128x64;
+		zephyr,sdhc = &sdhc1;
 	};
 
 	leds {
@@ -121,6 +123,30 @@
 	status = "okay";
 };
 
+&sdhc {
+	sdhc1: sdhc@1 {
+		status = "okay";
+
+		pinctrl-0 = <&sdhc0_default>;
+		pinctrl-names = "default";
+		power-delay-ms = <100>;
+		max-bus-freq = <52000000>;
+		bus-width = <4>;
+
+		clk-pin = <14>;
+		cmd-pin = <15>;
+		d0-pin = <2>;
+		d1-pin = <4>;
+		d2-pin = <12>;
+		d3-pin = <13>;
+
+		mmc {
+			compatible = "zephyr,sdmmc-disk";
+			status = "okay";
+		};
+	};
+};
+
 &flash0 {
 	status = "okay";
 	partitions {
diff --git a/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu.yaml b/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu.yaml
index f4d0e25cc59d2df..d16b056dd1166d5 100644
--- a/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu.yaml
+++ b/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu.yaml
@@ -14,6 +14,7 @@ supported:
   - display
   - lora
   - nvs
+  - sdhc
 testing:
   ignore_tags:
     - net
diff --git a/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu_defconfig b/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu_defconfig
index ee9920cda6870ee..9562223d56a8b86 100644
--- a/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu_defconfig
+++ b/boards/lilygo/ttgo_lora32/ttgo_lora32_esp32_procpu_defconfig
@@ -8,3 +8,4 @@ CONFIG_UART_CONSOLE=y
 
 CONFIG_GPIO=y
 CONFIG_I2C=y
+CONFIG_ESP32_USE_UNSUPPORTED_REVISION=y