Skip to content
This repository has been archived by the owner on Nov 11, 2024. It is now read-only.

Latest commit

 

History

History
87 lines (83 loc) · 33.1 KB

DATABASE.md

File metadata and controls

87 lines (83 loc) · 33.1 KB

Instance Matrix

The table below defines the instances of test hardware available on the ubxlib test farm and how each one is currently configured. It is parsed and used by the functions in u_data.py to know what to do so please always ensure that it is a properly formatted Markdown format table. The columns of the table are:

  • a unique instance ID: the first digit of the instance ID represents either a physical thing (a board connected via a COM port/debugger) or a distinct process (e.g. run Lint), the remaining digits represent variants, e.g. using different SDKs on a board; the second/third digit(s) of the instance ID must be used consistently (e.g. for NRF52840 variant 0 is always the nRF5 SDK, variant 1 is always the Zephyr SDK, etc.),
  • the MCU field must match a unique MCU name from one of the port/platform/<platform>/mcu/<mcu> directories (e.g. esp32),
  • some platforms (e.g. Zephyr and PlatformIO) require a board-level definition as well as an MCU; this may be provided in the "board" column,
  • the platform name must match one of the port/platform/<platform> directories (e.g. port/platform/esp-idf),
    • however, if you want to run CodeChecker instead of building the firmware you should add CodeChecker: prefix to the platform name (e.g. CodeChecker:STM32Cube),
  • where a choice of compilation toolchains is available the toolchain name must match a sub-directory of port/platform/<platform>/mcu/<mcu>,
  • the module column lists the peripherals under test:
    • if a module name begins with SARA, LARA, LENA or LEXI it will be prefixed by the test automation code with U_CELL_MODULE_TYPE_ and then assigned to a compilation flag U_CFG_TEST_CELL_MODULE_TYPE for use during testing;
    • if a module name begins with NINA, NORA, ANNA or ODIN it will be prefixed by the test automation code with U_SHORT_RANGE_MODULE_TYPE_ and then assigned to a compilation flag U_CFG_TEST_SHORT_RANGE_MODULE_TYPE for use during testing; note that for the case where the SHO on-board Wi-Fi/BLE client is employed no module name is given and instead the compilation flag U_CFG_BLE_MODULE_INTERNAL is added in the #defines column,
    • otherwise the module will be assumed to be GNSS and will be prefixed by the test automation code with U_GNSS_MODULE_TYPE_ and then assigned to a compilation flag U_CFG_TEST_GNSS_MODULE_TYPE for use during testing,
  • all APIs that exist on an instance will usually be tested, the "APIs available" column is used by the u_select.py automation script (see README.md) to select the instances that should be run where only a single API is affected by a change, e.g. if only the at_client is affected by a change then only those instances that have at_client in this column will be run; the name here must match one in the directory structure (e.g. mqtt_client for the common/mqtt_client API),
  • the ubxlib features to include, where empty means the default, which is all of cell, gnss and short_range,
  • lastly, overrides to or additional compilation flags may be supplied in the final column.
ID Description MCU Board Platform Toolchain Module(s) (separate with spaces) APIs available (separate with spaces) UBXLIB_FEATURES #define overrides (separate with spaces)
1 Doxygen U_CFG_GEOFENCE
2 AStyle style checker U_CFG_GEOFENCE
3 Pylint
4.1 Static size check
4.2 Static size check, cell only SARA_R5 cell
4.3.0 Static size check, gnss only M9 gnss
4.3.1 Static size check, gnss only, geofence M9 gnss U_CFG_GEOFENCE
4.4.0 Static size check, short-range only NINA_W15 short_range
4.4.1 Static size check, short-range gen 2 only NORA_W36 short_range short_range_gen2
5.1.0 Check no floating point
5.1.1 Check no floating point, short-range gen 2 short_range short_range_gen2
5.2.0 Check build without logging U_CFG_ENABLE_LOGGING=0 U_CFG_GEOFENCE
5.2.1 Check build without logging, SHO gen 2 short_range short_range_gen2 U_CFG_ENABLE_LOGGING=0
5.3 Check public headers not in ubxlib.h U_CFG_GEOFENCE
5.4 Check malloc()/free() being called U_CFG_GEOFENCE
6.1.0 CodeChecker (Zephyr) NRF5340 ubx_evkninab3_nrf52840 CodeChecker:Zephyr SARA_R5 M8 NINA_W15 U_CFG_BLE_MODULE_INTERNAL U_CFG_PPP_ENABLE U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_BLE_TEST_CFG_REMOTE_SPS_PERIPHERAL=2462ABB6EAC6p U_CFG_APP_SHORT_RANGE_ROLE=1 U_CFG_TEST_NET_STATUS_CELL U_CFG_TEST_NET_STATUS_SHORT_RANGE U_DEBUG_UTILS_DUMP_THREADS U_CFG_HEAP_MONITOR
6.1.1 CodeChecker (Zephyr), short-range gen 2 NRF52833 ubx_evkninab4_nrf52833 CodeChecker:Zephyr SARA_R5 NORA_W36 short_range short_range_gen2 U_CFG_BLE_MODULE_INTERNAL U_CFG_PPP_ENABLE U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_BLE_TEST_CFG_REMOTE_SPS_PERIPHERAL=2462ABB6EAC6p U_CFG_APP_SHORT_RANGE_ROLE=1 U_CFG_TEST_NET_STATUS_SHORT_RANGE U_DEBUG_UTILS_DUMP_THREADS U_CFG_HEAP_MONITOR
6.2.0 CodeChecker (STM32Cube) STM32F4 CodeChecker:STM32Cube SARA_R5 NINA_W15 M8 U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=0x42 U_CFG_SARA_R5_M8_WORKAROUND U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_NET_STATUS_CELL U_CFG_TEST_NET_STATUS_SHORT_RANGE U_DEBUG_UTILS_DUMP_THREADS U_CFG_HEAP_MONITOR
6.2.1 CodeChecker (STM32Cube) with geofence STM32F4 CodeChecker:STM32Cube SARA_R5 NINA_W15 M8 U_CFG_GEOFENCE U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=0x42 U_CFG_SARA_R5_M8_WORKAROUND U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_NET_STATUS_CELL U_CFG_TEST_NET_STATUS_SHORT_RANGE U_DEBUG_UTILS_DUMP_THREADS U_CFG_HEAP_MONITOR
6.2.2 CodeChecker (STM32Cube) STM32U5 CodeChecker:STM32Cube SARA_R5 NINA_W15 M8 U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=0x42 U_CFG_SARA_R5_M8_WORKAROUND U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_NET_STATUS_CELL U_CFG_TEST_NET_STATUS_SHORT_RANGE U_DEBUG_UTILS_DUMP_THREADS U_CFG_HEAP_MONITOR
7 Build PIO examples
8 Build as a Zephyr module NRF5340 nrf5340dk_nrf5340_cpuapp
10.0 ESP32-DevKitC ESP32 ESP-IDF M10 port ubx_protocol gnss spartn geofence gnss geodesic U_CFG_GEOFENCE U_CFG_GNSS_FENCE_USE_GEODESIC U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=23 U_CFG_APP_PIN_GNSS_DATA_READY=19 U_CFG_APP_GNSS_DEVICE_PIO_DATA_READY=4 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_CFG_MUTEX_DEBUG U_DEBUG_UTILS_DUMP_THREADS
10.2.0 ESP32-DevKitC ESP32 esp-wrover-kit platformio espidf M10 port device network U_CFG_APP_FILTER=port.example. U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=23 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1
10.2.1 ESP32-DevKitC ESP32 esp-wrover-kit platformio espidf M10 port device network gnss U_CFG_APP_FILTER=port.example.gnssInfo. U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=23 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1
11.0 ESP32-DevKitC ESP32 ESP-IDF M9 port at_client ubx_protocol gnss spartn U_CFG_APP_GNSS_SPI=2 U_CFG_TEST_PIN_GNSS_RESET_N=25 U_CFG_APP_PIN_GNSS_DATA_READY=12 U_CFG_APP_GNSS_DEVICE_PIO_DATA_READY=7 U_GNSS_MGA_TEST_HAS_FLASH U_CFG_MUTEX_DEBUG U_CFG_TEST_UART_B=1 U_CFG_TEST_PIN_UART_A_CTS=-1 U_CFG_TEST_PIN_UART_A_RTS=-1 U_CFG_TEST_PIN_UART_A_RXD=26 U_CFG_TEST_PIN_UART_B_TXD=27 U_CFG_TEST_PIN_UART_B_RXD=14 U_DEBUG_UTILS_DUMP_THREADS
11.2 ESP32-DevKitC ESP32 esp-wrover-kit platformio arduino M9 port device network U_CFG_APP_FILTER=port.example. U_CFG_APP_GNSS_SPI=2 U_GNSS_MGA_TEST_HAS_FLASH U_CFG_TEST_PIN_GNSS_RESET_N=25
12.0 ESP32-DevKitC + EVK, Cat M1, uConnect ESP32 ESP-IDF SARA_R5 M8 NINA_W15 port device network sock ble wifi cell short_range security mqtt_client http_client gnss location U_CFG_PPP_ENABLE U_CELL_TEST_MUX_ALWAYS U_CFG_TEST_SECURITY_DISABLE U_CFG_TEST_CELL_PWR_DISABLE U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=2 U_CFG_APP_PIN_SHORT_RANGE_CTS=22 U_CFG_APP_PIN_SHORT_RANGE_RTS=23 U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_SARA_R5_M8_WORKAROUND U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_APP_PIN_CELL_TXD=21 U_CFG_APP_PIN_CELL_RXD=19 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_DEBUG_UTILS_DUMP_THREADS
12.2.0 ESP32-DevKitC + EVK, Cat M1, uConnect ESP32 esp-wrover-kit platformio espidf SARA_R5 M8 NINA_W15 port device network U_CFG_APP_FILTER=port.example.gnssInfo. U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=2 U_CFG_APP_PIN_SHORT_RANGE_CTS=22 U_CFG_APP_PIN_SHORT_RANGE_RTS=23 U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_SARA_R5_M8_WORKAROUND U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_APP_PIN_CELL_TXD=21 U_CFG_APP_PIN_CELL_RXD=19 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p
12.2.1 ESP32-DevKitC + EVK, Cat M1 ESP32 esp-wrover-kit platformio espidf SARA_R5 port device network cell U_CFG_APP_FILTER=cellInfo.cellSim. U_CFG_TEST_SECURITY_DISABLE U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_APP_PIN_SHORT_RANGE_CTS=22 U_CFG_APP_PIN_SHORT_RANGE_RTS=23 U_CFG_SARA_R5_M8_WORKAROUND U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_APP_PIN_CELL_TXD=21 U_CFG_APP_PIN_CELL_RXD=19 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1
12.2.2 ESP32-DevKitC + EVK, Cat M1, uConnect ESP32 esp-wrover-kit platformio espidf NINA_W15 port device network short_range U_CFG_APP_FILTER=wifiStation. U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=2 U_CFG_APP_PIN_SHORT_RANGE_CTS=22 U_CFG_APP_PIN_SHORT_RANGE_RTS=23 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p
13.1.0 Nordic DK board (NRF52840) + EVK NRF52840 nrf52840dk_nrf52840 Zephyr M10 port at_client ubx_protocol gnss spartn gnss U_CFG_APP_GNSS_I2C=1 U_CFG_TEST_PIN_GNSS_RESET_N=29 U_CFG_TEST_UART_B=0 U_DEBUG_UTILS_DUMP_THREADS
13.1.1 Nordic DK board (NRF52840) + EVK NRF52840 nrf52840dk_nrf52840 Zephyr port at_client ubx_protocol spartn short_range U_CFG_TEST_UART_B=0 U_DEBUG_UTILS_DUMP_THREADS
13.1.2 Nordic DK board (NRF52840) + EVK, DT cfg NRF52840 ubx_evkninab3_nrf52840 Zephyr port U_CFG_APP_FILTER=zephyrPort. U_CFG_PPP_ENABLE U_CFG_TEST_UART_A=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1
14 STM32F407 Discovery + EVK, Cat M1 STM32F4 STM32Cube LEXI_R422 M9 port device network sock security cell mqtt_client http_client gnss location CMSIS_V2 U_CELL_CFG_TEST_CELL_DISABLE_MNO_PROFILE U_CFG_TEST_CELL_PWR_DISABLE U_CFG_TEST_GNSS_ASSIST_NOW U_GNSS_MGA_TEST_HAS_FLASH U_LOCATION_TEST_DISABLE U_CFG_1V8_SIM_WORKAROUND HSE_VALUE=8000000U U_CFG_APP_GNSS_SPI=2 U_CFG_APP_PIN_GNSS_SPI_MOSI=0x1F U_CFG_APP_PIN_GNSS_SPI_MISO=0x1E U_CFG_APP_PIN_GNSS_SPI_CLK=0x1D U_CFG_APP_PIN_GNSS_SPI_SELECT=0x1C U_CFG_TEST_PIN_GNSS_RESET_N=0x40 U_CFG_TEST_PIN_C=0x3F U_CFG_APP_GNSS_UART=-1 U_CFG_APP_PIN_GNSS_ENABLE_POWER=-1 U_CFG_HW_EXTI_8_AVAILABLE=1 U_CFG_HW_EXTI_15_AVAILABLE=1 U_CFG_TEST_UART_A=-1 U_CFG_APP_PIN_C030_ENABLE_3V3=-1 U_CFG_APP_PIN_CELL_RESET=-1 U_CFG_APP_CELL_UART=3 U_CFG_APP_PIN_CELL_TXD=0x38 U_CFG_APP_PIN_CELL_RXD=0x39 U_CFG_APP_PIN_CELL_RTS=-1 U_CFG_APP_PIN_CELL_CTS=-1 U_DEBUG_UTILS_DUMP_THREADS
15.1 Nordic DK board (NRF52840) + EVK NRF52840 nrf52840dk_nrf52840 Zephyr M9 port device network ble short_range gnss U_CFG_TEST_UART_A=-1 U_CFG_APP_GNSS_SPI=3 U_CFG_APP_PIN_GNSS_SPI_SELECT=29 U_CFG_TEST_PIN_GNSS_RESET_N=37 U_GNSS_MGA_TEST_HAS_FLASH U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_DEBUG_UTILS_DUMP_THREADS
16 STM32F407 Discovery STM32F4 STM32Cube M10 port ubx_protocol gnss spartn geofence gnss U_CFG_GEOFENCE HSE_VALUE=8000000U U_PORT_TEST_DISABLE_I2C U_GNSS_MGA_TEST_DISABLE_DATABASE U_CFG_APP_GNSS_I2C=1 U_CFG_TEST_PIN_GNSS_RESET_N=0x40 U_CFG_HW_EXTI_6_AVAILABLE=1 U_CFG_APP_PIN_GNSS_DATA_READY=0x26 U_CFG_APP_GNSS_DEVICE_PIO_DATA_READY=0 U_CFG_APP_GNSS_UART=-1 U_CFG_APP_PIN_GNSS_ENABLE_POWER=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_CFG_APP_PIN_C030_ENABLE_3V3=-1 U_CFG_APP_PIN_CELL_RESET=-1 U_DEBUG_UTILS_DUMP_THREADS
17.1.0 Nordic NRF5340 DK board NRF5340 nrf5340dk_nrf5340_cpuapp Zephyr M9 port device network ble short_range lib_common ubx_protocol gnss spartn U_CFG_APP_GNSS_SPI=2 U_CFG_APP_SPI_MAX_SEGMENT_SIZE=32 U_CFG_APP_PIN_GNSS_SPI_SELECT=46 U_CFG_TEST_PIN_GNSS_RESET_N=37 U_GNSS_MGA_TEST_HAS_FLASH U_CFG_BLE_MODULE_INTERNAL U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_BLE_TEST_CFG_REMOTE_SPS_PERIPHERAL=2462ABB6EAC6p U_CFG_APP_SHORT_RANGE_ROLE=1 U_DEBUG_UTILS_DUMP_THREADS
17.1.1 Nordic NRF5340 DK board NRF5340 nrf5340dk_nrf5340_cpuapp Zephyr M9 port gnss U_CFG_APP_FILTER=port U_CFG_APP_GNSS_SPI=2 U_CFG_TEST_GNSS_SPI_SELECT_INDEX=1 U_CFG_APP_PIN_GNSS_SPI_SELECT=46 U_CFG_TEST_PIN_GNSS_RESET_N=37 U_GNSS_MGA_TEST_HAS_FLASH U_DEBUG_UTILS_DUMP_THREADS
18 NORA-B1 NRF5340 DK board + EVK, Cat M1 NRF5340 nrf5340dk_nrf5340_cpuapp Zephyr SARA_R5 M8 port device network sock security cell lib_common mqtt_client http_client gnss location U_CELL_TEST_MUX_ALWAYS U_CFG_TEST_CELL_PWR_DISABLE U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_TEST_CLOUD_LOCATE U_CFG_TEST_CELL_LOCATE U_CFG_TEST_GNSS_ASSIST_NOW U_CFG_SARA_R5_M8_WORKAROUND U_CFG_APP_PIN_CELL_DTR=37 U_CFG_APP_PIN_CELL_PWR_ON=36 U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS
19 C030-R5 board (STM32F437), Cat M1, uConnect STM32F4 STM32Cube SARA_R5 NINA_W15 M8 port device network sock ble wifi cell short_range security mqtt_client http_client ubx_protocol spartn gnss location U_CFG_TEST_CELL_PWR_DISABLE U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=0x42 U_CFG_SARA_R5_M8_WORKAROUND U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_DEBUG_UTILS_DUMP_THREADS
20 WHRE board (NINA-W1), Cat M1 ESP32 ESP-IDF SARA_R412M_02B cell mqtt_client U_CFG_APP_FILTER=cellMqtt.mqttClient.exampleMqtt.cellMuxMqtt.cellCfgGreeting.cellInfo.cellCfgTime.cellSim. U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS
21 WHRE board (NINA-W1), Cat M1 ESP32 ESP-IDF SARA_R410M_02B cell mqtt_client U_CFG_APP_FILTER=cellMqtt.mqttClient.exampleMqtt.cellMuxMqtt.cellCfgGreeting.cellInfo.cellCfgTime.cellSim. U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS
22 EVK, Cat M1 ESP32 ESP-IDF SARA_R422 port U_CFG_APP_FILTER=espidf. U_CFG_PPP_ENABLE U_CFG_TEST_CELL_PWR_DISABLE U_CFG_MONITOR_DTR_RTS_OFF U_CFG_1V8_SIM_WORKAROUND U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_PWR_ON=5 U_CFG_APP_PIN_CELL_TXD=14 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS
23.0 Windows + EVK, Cat M1, uConnect WIN32 WINDOWS MSVC SARA_R5 M8 NINA_W15 port device network sock ble wifi cell short_range security mqtt_client http_client ubx_protocol gnss spartn location geofence cell short_range gnss geodesic U_CFG_TEST_TIMEOUT_SPEED_UP=14 U_CFG_GEOFENCE U_AT_CLIENT_PRINT_WITH_TIMESTAMP U_CFG_HEAP_MONITOR U_ASSERT_HOOK_FUNCTION_TEST_RETURN U_CFG_TEST_DISABLE_GREETING_CALLBACK U_CFG_MUTEX_DEBUG U_NETWORK_GNSS_CFG_CELL_USE_AT_ONLY U_GNSS_MSG_TEST_MESSAGE_RECEIVE_NON_BLOCKING_PRINT U_CFG_TEST_NET_STATUS_CELL=RF_SWITCH_A U_CFG_TEST_NET_STATUS_SHORT_RANGE=PWR_SWITCH_A U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=6009C390E4DAp U_CFG_TEST_UART_A=100 U_CFG_APP_SHORT_RANGE_UART=101 U_CFG_APP_SHORT_RANGE_UART2=104 U_CFG_APP_CELL_UART=102 U_CFG_QUEUE_DEBUG
23.1 Windows WIN32 WINDOWS MSVC timeout U_CFG_APP_FILTER=timeoutWrap. U_CFG_TEST_TIMEOUT_SPEED_UP=18
24.0 Linux/Posix under Zephyr LINUX32 native_posix Zephyr port gnss geofence gnss geodesic U_CFG_APP_FILTER=port.atClient.gnssFenceStandalone. U_CFG_GEOFENCE U_CFG_GNSS_FENCE_USE_GEODESIC U_CFG_HEAP_MONITOR U_ASSERT_HOOK_FUNCTION_TEST_RETURN U_CFG_MUTEX_DEBUG U_CFG_TEST_UART_A=0 U_CFG_TEST_UART_B=1
24.1 Linux + EVK, live network LINUX64 Linux LARA_R6 port U_CFG_APP_FILTER=port.examplePppLinuxSockets. U_CFG_PPP_ENABLE U_CFG_HEAP_MONITOR U_CFG_APP_CELL_UART=0 U_CFG_APP_CELL_UART_PPP=1 U_CFG_APP_UART_PREFIX=/dev/ublox_lara_r6_usb_at_ U_CELL_TEST_CFG_APN=iot.1nce.net U_CELL_CFG_APN_DEFAULT=iot.1nce.net U_CELL_TEST_NO_INVALID_APN U_CELL_TEST_CFG_BANDMASK1=0x0000000000080084ULL U_CELL_NET_TEST_RAT=U_CELL_NET_RAT_LTE U_CELL_TEST_CFG_MNO_PROFILE=90 U_CFG_MUTEX_DEBUG
25 HPG Solution board (NINA-W1), live network ESP32 ESP-IDF LARA_R6 M9 port device network sock cell security mqtt_client gnss location geofence U_CFG_GEOFENCE U_CFG_TEST_GNSS_POWER_SAVING_NOT_SUPPORTED U_CFG_TEST_DISABLE_MUX U_GNSS_MGA_TEST_ASSIST_NOW_AUTONOMOUS_NOT_SUPPORTED U_NETWORK_GNSS_CFG_CELL_USE_AT_ONLY U_HTTP_CLIENT_DISABLE_TEST U_CELL_CFG_TEST_USE_FIXED_TIME_SECONDS U_CFG_TEST_CELL_GEOFENCE U_CFG_MONITOR_DTR_RTS_OFF U_CELL_TEST_NO_INVALID_APN U_CELL_TEST_CFG_BANDMASK1=0x0000000000080084ULL U_CELL_NET_TEST_RAT=U_CELL_NET_RAT_LTE U_CELL_TEST_CFG_MNO_PROFILE=90 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_CFG_APP_PIN_CELL_PWR_ON=0x800c U_CFG_APP_PIN_CELL_RESET=13 U_CELL_RESET_PIN_DRIVE_MODE=U_PORT_GPIO_DRIVE_MODE_NORMAL U_CFG_APP_PIN_CELL_VINT=0x8025 U_CFG_APP_PIN_CELL_DTR=15 U_CFG_APP_PIN_CELL_TXD=25 U_CFG_APP_PIN_CELL_RXD=26 U_CFG_APP_PIN_CELL_RTS=27 U_CFG_APP_PIN_CELL_CTS=36 U_CFG_APP_GNSS_I2C=0 U_GNSS_TEST_I2C_ADDRESS_EXTRA=0x43 U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS
26 NINA-B4 NRF52833 ubx_evkninab4_nrf52833 Zephyr M10 port ubx_protocol gnss spartn U_CFG_APP_GNSS_I2C=0 U_CFG_APP_I2C_MAX_SEGMENT_SIZE=32 U_CFG_TEST_PIN_GNSS_RESET_N=30 U_CFG_APP_PIN_GNSS_DATA_READY=29 U_CFG_APP_GNSS_DEVICE_PIO_DATA_READY=1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1
27 ESP32S3-DevKitC ESP32S3 ESP-IDF M9 port ubx_protocol gnss spartn U_CFG_TEST_GNSS_POWER_SAVING_NOT_SUPPORTED U_CFG_APP_GNSS_I2C=0 U_CFG_TEST_PIN_GNSS_RESET_N=40 U_GNSS_MGA_TEST_ASSIST_NOW_AUTONOMOUS_NOT_SUPPORTED U_CFG_TEST_PIN_A=1 U_CFG_TEST_PIN_B=9 U_CFG_TEST_PIN_C=38 U_CFG_TEST_PIN_UART_A_CTS=11 U_CFG_TEST_PIN_UART_A_RTS=47 U_CFG_TEST_PIN_UART_A_RXD=10 U_CFG_TEST_PIN_UART_A_TXD=48 U_CFG_APP_PIN_GNSS_SDA=18 U_CFG_APP_PIN_GNSS_SCL=17 U_CFG_MUTEX_DEBUG U_DEBUG_UTILS_DUMP_THREADS
28 Linux + EVK, Cat M1, uConnect LINUX64 Linux SARA_R5 M9 NINA_W15 port device network sock ble wifi cell short_range security mqtt_client http_client ubx_protocol gnss spartn location geofence cell short_range gnss geodesic U_CFG_PPP_ENABLE U_CFG_GEOFENCE U_CFG_HEAP_MONITOR U_ASSERT_HOOK_FUNCTION_TEST_RETURN U_CFG_TEST_USE_VALGRIND U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_APP_UART_PREFIX=/dev/ttyAMA U_CFG_APP_CELL_UART=0 U_CFG_APP_PIN_CELL_PWR_ON=25 U_CELL_PWR_ON_PIN_DRIVE_MODE=U_PORT_GPIO_DRIVE_MODE_NORMAL U_CFG_APP_SHORT_RANGE_UART=1 U_CFG_APP_PIN_SHORT_RANGE_RESET_TO_DEFAULTS=26 U_CFG_APP_PIN_SHORT_RANGE_CTS=0 U_CFG_APP_PIN_SHORT_RANGE_RTS=0 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_CFG_TEST_GNSS_SPI_SELECT_INDEX=0 U_CFG_APP_GNSS_SPI=0 U_CFG_APP_GNSS_I2C=8 U_CFG_TEST_PIN_GNSS_RESET_N=19 U_GNSS_MGA_TEST_HAS_FLASH U_CFG_TEST_UART_PREFIX=/tmp/ttyv U_CFG_TEST_UART_A=0 U_CFG_TEST_UART_B=1 U_AT_CLIENT_TEST_AT_TIMEOUT_TOLERANCE_MS=1000 U_CFG_TEST_PIN_A=17 U_CFG_TEST_PIN_B=27 U_CFG_TEST_PIN_C=22 U_CFG_MUTEX_DEBUG
29 HPG C214 board (NINA-W1), live network ESP32 ESP-IDF LENA_R8 M9 port device network sock cell security mqtt_client gnss location U_CFG_PPP_ENABLE U_HTTP_CLIENT_DISABLE_TEST U_CELL_GPIO_DISABLE_TEST U_MQTT_CLIENT_TEST_NO_NULL_SEND U_CFG_TEST_GNSS_POWER_SAVING_NOT_SUPPORTED U_GNSS_MGA_TEST_ASSIST_NOW_AUTONOMOUS_NOT_SUPPORTED U_CELL_CFG_TEST_USE_FIXED_TIME_SECONDS U_CFG_MONITOR_DTR_RTS_OFF U_CELL_TEST_NO_INVALID_APN U_CELL_TEST_CFG_BANDMASK1=0x0000000000080084ULL U_CELL_NET_TEST_RAT=U_CELL_NET_RAT_LTE U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_CFG_APP_PIN_CELL_PWR_ON=0x801a U_CFG_APP_PIN_CELL_RESET=33 U_CELL_RESET_PIN_DRIVE_MODE=U_PORT_GPIO_DRIVE_MODE_NORMAL U_CFG_APP_PIN_CELL_VINT=0x8025 U_CFG_APP_PIN_CELL_DTR=15 U_CFG_APP_PIN_CELL_TXD=25 U_CFG_APP_PIN_CELL_RXD=34 U_CFG_APP_PIN_CELL_RTS=27 U_CFG_APP_PIN_CELL_CTS=36 U_CFG_APP_GNSS_I2C=0 U_GNSS_TEST_I2C_ADDRESS_EXTRA=0x43 U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS
30 STM32F407 Discovery, NORA-W3, SARA-R520 EVK STM32F4 STM32Cube LEXI_R52 NORA_W36 port device network sock cell ble wifi short_range security mqtt_client http_client location cell gnss short_range short_range_gen2 CMSIS_V2 HSE_VALUE=8000000U U_CFG_LOC_TEST_CHANGE_SYSTEM_TYPES_DISABLE U_CFG_APP_PIN_C030_ENABLE_3V3=-1 U_CFG_APP_PIN_CELL_RESET=-1 U_CFG_APP_CELL_UART=2 U_CFG_APP_PIN_CELL_TXD=0x03 U_CFG_APP_PIN_CELL_RXD=0x02 U_CFG_APP_PIN_CELL_RTS=-1 U_CFG_APP_PIN_CELL_CTS=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_TEST_UART_A=-1 U_BLE_TEST_CFG_REMOTE_SPS_CENTRAL=2462ABB6CC42p U_BLE_TEST_CFG_REMOTE_SPS_PERIPHERAL=2462ABB6EAC6p U_CFG_APP_SHORT_RANGE_ROLE=3 U_CFG_APP_SHORT_RANGE_UART2=6 U_CFG_APP_PIN_SHORT_RANGE_TXD2=0x26 U_CFG_APP_PIN_SHORT_RANGE_RXD2=0x27 U_DEBUG_UTILS_DUMP_THREADS
31 STM32F7, Nucleo-F767ZI, LARA-R6, live net STM32 nucleo_f767zi Zephyr LARA_R6 port device network sock cell security mqtt_client http_client location U_ZEPHYR_PORT_UART_ASYNC U_CFG_TEST_DISABLE_MUX U_CFG_TEST_CELL_PWR_DISABLE U_CELL_TEST_CFG_APN=iot.1nce.net U_CELL_CFG_TEST_USE_FIXED_TIME_SECONDS U_CELL_TEST_NO_INVALID_APN U_CELL_TEST_CFG_BANDMASK1=0x0000000000080084ULL U_CELL_NET_TEST_RAT=U_CELL_NET_RAT_LTE U_CELL_TEST_CFG_MNO_PROFILE=90 U_DEBUG_UTILS_DUMP_THREADS
32.0 STM32U5, Nucleo-U575ZI, Zephyr STM32 nucleo_u575zi_q Zephyr SARA_U201 M9 ODIN_W2 port device network sock cell ble wifi short_range gnss security http_client location ubx_protocol spartn U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CELL_NET_TEST_RAT=U_CELL_NET_RAT_GSM_GPRS_EGPRS U_CELL_TEST_CFG_APN=iot.1nce.net U_CELL_CFG_APN_DEFAULT=iot.1nce.net U_CFG_TEST_TRANSPORT_SECURITY_DISABLE U_CELL_CFG_TEST_USE_FIXED_TIME_SECONDS U_CELL_TEST_NO_INVALID_APN U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_APP_GNSS_I2C=1 U_CFG_APP_I2C_MAX_SEGMENT_SIZE=255 U_GNSS_MGA_TEST_HAS_FLASH U_CFG_TEST_GNSS_POWER_SAVING_NOT_SUPPORTED U_GNSS_MGA_TEST_ASSIST_NOW_AUTONOMOUS_NOT_SUPPORTED U_CFG_TEST_PIN_GNSS_RESET_N=0x5D U_CFG_APP_SHORT_RANGE_UART=3 U_CFG_TEST_BLE_DISABLE_SPS U_CFG_TEST_UART_A=-1 U_DEBUG_UTILS_DUMP_THREADS
32.1 STM32U5, STM32Cube default, Nucleo-U575ZI STM32U5 STM32Cube SARA_U201 port U_CFG_APP_FILTER=portInit.portRentrancy.portOs.portEventQueue.portTimers.portUart.portI2c.portSpi.portGpio. U_CELL_NET_TEST_RAT=U_CELL_NET_RAT_GSM_GPRS_EGPRS U_CELL_TEST_CFG_APN=iot.1nce.net U_CELL_CFG_APN_DEFAULT=iot.1nce.net U_CFG_TEST_TRANSPORT_SECURITY_DISABLE U_CELL_CFG_TEST_USE_FIXED_TIME_SECONDS U_CELL_TEST_NO_INVALID_APN U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_APP_GNSS_I2C=-1 U_CFG_APP_GNSS_SPI=-1 U_CFG_HW_EXTI_12_AVAILABLE=1 U_CFG_HW_EXTI_15_AVAILABLE=1
32.2 STM32U5, STM32Cube FreeRTOS, Nucleo-U575ZI STM32U5 STM32Cube FreeRTOS SARA_U201 port U_CFG_APP_FILTER=port.example. U_CELL_NET_TEST_RAT=U_CELL_NET_RAT_GSM_GPRS_EGPRS U_CELL_TEST_CFG_APN=iot.1nce.net U_CELL_CFG_APN_DEFAULT=iot.1nce.net U_CFG_TEST_TRANSPORT_SECURITY_DISABLE U_CELL_CFG_TEST_USE_FIXED_TIME_SECONDS U_CELL_TEST_NO_INVALID_APN U_CFG_CELL_DISABLE_UART_POWER_SAVING U_CFG_APP_GNSS_I2C=-1 U_CFG_APP_GNSS_SPI=-1
33 ESP32-DevKitC + EVK, live network ESP32 ESP-IDF LEXI_R10 port device network sock cell security mqtt_client http_client U_CFG_TEST_UART_A=-1 U_CFG_TEST_PIN_A=-1 U_CFG_TEST_PIN_B=-1 U_CFG_TEST_PIN_C=-1 U_CFG_APP_PIN_CELL_VINT=-1 U_CFG_APP_PIN_CELL_ENABLE_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_POWER=-1 U_CFG_APP_CELL_PIN_GNSS_DATA_READY=-1 U_CELL_TEST_CFG_BANDMASK1=0x80800d5ULL U_CELL_TEST_CFG_ALT_BANDMASK1=0x10ULL U_CELL_TEST_CFG_APN=iot.1nce.net U_CELL_CFG_APN_DEFAULT=iot.1nce.net U_CELL_PWR_GNSS_PROFILE_BITS_EXTRA=-1 U_CFG_LOC_TEST_CHANGE_SYSTEM_TYPES_DISABLE U_CELL_MUX_ENABLE_DEBUG U_CELL_MUX_ENABLE_USER_TX_DEBUG U_CELL_MUX_ENABLE_USER_RX_DEBUG U_CELL_MUX_HEX_DEBUG U_DEBUG_UTILS_DUMP_THREADS U_CELL_TEST_CFG_MNO_PROFILE=90 U_CELL_TEST_NO_INVALID_APN U_HTTP_CLIENT_TEST_MAX_NUM=1 U_HTTP_SHORT_RANGE_CLIENT_TEST_MAX_NUM=2
34 NXP MCXN947 NXP frdm_mcxn947/mcxn947/cpu0 Zephyr port U_CFG_TEST_UART_A=-1

Notes:

  • the #defines listed are overrides on the default values that are defined in the code or additional to those defined in the code; they are not a complete list,
  • the instances on which at_client is available to test use the same wiring as the other boards but allocate UARTs to pins differently: two UARTs are used for back-to-back testing, no flow control, and the CTS/RTS pins that are back-to-back connected for port UART testing are instead allocated to the second UART; on these instances the port UART test will be skipped,
  • the cellular tests take quite a long time to run and so where there are two SDKs on a single platform usually only one of them will run the cellular tests to keep the execution time down.

Maintenance

  • When adding a new API make sure that it is present in at least one of the entries above, otherwise it may NOT be detected and tested at all on a branch that is NOT master (where a smaller, focused set of tests are carried out).