From 0774002bff24a05b1179668f820faf31586718d6 Mon Sep 17 00:00:00 2001
From: suchmememanyskill <38142618+suchmememanyskill@users.noreply.github.com>
Date: Tue, 30 Apr 2024 18:01:02 +0200
Subject: [PATCH] Bump version

---
 PrusaSlicer/filament/PETG 230C 70C.ini              | 2 +-
 PrusaSlicer/filament/PETG 240C 75C.ini              | 2 +-
 PrusaSlicer/filament/PETG CLEAR 240C 70C.ini        | 2 +-
 PrusaSlicer/filament/PLA 200C 60C.ini               | 2 +-
 PrusaSlicer/filament/PLA 210C 60C.ini               | 2 +-
 PrusaSlicer/filament/PLA 220C 60C.ini               | 2 +-
 PrusaSlicer/filament/TPU 220C 50C.ini               | 2 +-
 PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini | 2 +-
 PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini | 2 +-
 PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini | 2 +-
 PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini   | 2 +-
 PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini     | 2 +-
 PrusaSlicer/printer/Ender 3 V3 SE.ini               | 2 +-
 17 files changed, 17 insertions(+), 17 deletions(-)

diff --git a/PrusaSlicer/filament/PETG 230C 70C.ini b/PrusaSlicer/filament/PETG 230C 70C.ini
index e929ec7..f6f9d9f 100644
--- a/PrusaSlicer/filament/PETG 230C 70C.ini	
+++ b/PrusaSlicer/filament/PETG 230C 70C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.2.2
+filament_notes = v1.2.3
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PETG 240C 75C.ini b/PrusaSlicer/filament/PETG 240C 75C.ini
index 5c24664..d4fdf16 100644
--- a/PrusaSlicer/filament/PETG 240C 75C.ini	
+++ b/PrusaSlicer/filament/PETG 240C 75C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.2.2
+filament_notes = v1.2.3
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PETG CLEAR 240C 70C.ini b/PrusaSlicer/filament/PETG CLEAR 240C 70C.ini
index 760d702..c1f4929 100644
--- a/PrusaSlicer/filament/PETG CLEAR 240C 70C.ini	
+++ b/PrusaSlicer/filament/PETG CLEAR 240C 70C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.2.2
+filament_notes = v1.2.3
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PLA 200C 60C.ini b/PrusaSlicer/filament/PLA 200C 60C.ini
index a4ccde1..cc5b3be 100644
--- a/PrusaSlicer/filament/PLA 200C 60C.ini	
+++ b/PrusaSlicer/filament/PLA 200C 60C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.2.2
+filament_notes = v1.2.3
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PLA 210C 60C.ini b/PrusaSlicer/filament/PLA 210C 60C.ini
index aae4683..7a28405 100644
--- a/PrusaSlicer/filament/PLA 210C 60C.ini	
+++ b/PrusaSlicer/filament/PLA 210C 60C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.2.2
+filament_notes = v1.2.3
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/PLA 220C 60C.ini b/PrusaSlicer/filament/PLA 220C 60C.ini
index 29213d1..d992a84 100644
--- a/PrusaSlicer/filament/PLA 220C 60C.ini	
+++ b/PrusaSlicer/filament/PLA 220C 60C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.2.2
+filament_notes = v1.2.3
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/filament/TPU 220C 50C.ini b/PrusaSlicer/filament/TPU 220C 50C.ini
index 206c70f..698c883 100644
--- a/PrusaSlicer/filament/TPU 220C 50C.ini	
+++ b/PrusaSlicer/filament/TPU 220C 50C.ini	
@@ -28,7 +28,7 @@ filament_minimal_purge_on_wipe_tower = 15
 filament_multitool_ramming = 0
 filament_multitool_ramming_flow = 10
 filament_multitool_ramming_volume = 10
-filament_notes = v1.2.2
+filament_notes = v1.2.3
 filament_ramming_parameters = "120 100 6.6 6.8 7.2 7.6 7.9 8.2 8.7 9.4 9.9 10.0| 0.05 6.6 0.45 6.8 0.95 7.8 1.45 8.3 1.95 9.7 2.45 10 2.95 7.6 3.45 7.6 3.95 7.6 4.45 7.6 4.95 7.6"
 filament_retract_before_travel = nil
 filament_retract_before_wipe = nil
diff --git a/PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini
index a03776d..286bc2c 100644
--- a/PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Fast 0.20mm @ Ender 3 V3 SE.ini	
@@ -74,7 +74,7 @@ min_feature_size = 25%
 min_skirt_length = 8
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.2.2
+notes = v1.2.3
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini
index 833b2d2..c2d5686 100644
--- a/PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Fast 0.24mm @ Ender 3 V3 SE.ini	
@@ -74,7 +74,7 @@ min_feature_size = 25%
 min_skirt_length = 8
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.2.2
+notes = v1.2.3
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini
index fdcc4c0..8e2853f 100644
--- a/PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Normal 0.16mm @ Ender 3 V3 SE.ini	
@@ -74,7 +74,7 @@ min_feature_size = 25%
 min_skirt_length = 8
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.2.2
+notes = v1.2.3
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini
index 8e467c8..80b7fcd 100644
--- a/PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Normal 0.20mm @ Ender 3 V3 SE.ini	
@@ -74,7 +74,7 @@ min_feature_size = 25%
 min_skirt_length = 8
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.2.2
+notes = v1.2.3
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini
index b60d564..e04d76d 100644
--- a/PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Normal 0.24mm @ Ender 3 V3 SE.ini	
@@ -74,7 +74,7 @@ min_feature_size = 25%
 min_skirt_length = 8
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.2.2
+notes = v1.2.3
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini
index 6fa754e..7703a0a 100644
--- a/PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Slow 0.10mm @ Ender 3 V3 SE.ini	
@@ -74,7 +74,7 @@ min_feature_size = 25%
 min_skirt_length = 8
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.2.2
+notes = v1.2.3
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini
index ff8cb72..70b8822 100644
--- a/PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Slow 0.16mm @ Ender 3 V3 SE.ini	
@@ -74,7 +74,7 @@ min_feature_size = 25%
 min_skirt_length = 8
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.2.2
+notes = v1.2.3
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini b/PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini
index 6eb3fd5..c34e42f 100644
--- a/PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/print/Slow 0.20mm @ Ender 3 V3 SE.ini	
@@ -74,7 +74,7 @@ min_feature_size = 25%
 min_skirt_length = 8
 mmu_segmented_region_interlocking_depth = 0
 mmu_segmented_region_max_width = 0
-notes = v1.2.2
+notes = v1.2.3
 only_retract_when_crossing_perimeters = 0
 ooze_prevention = 0
 output_filename_format = {input_filename_base}_{print_time}_{digits(layer_height,1,2)}mm_{temperature[0]}C_{filament_type[0]}_{printer_model}.gcode
diff --git a/PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini b/PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini
index bd346c8..ed9b31a 100644
--- a/PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini	
+++ b/PrusaSlicer/printer/Ender 3 V3 SE (Klipper).ini	
@@ -47,7 +47,7 @@ parking_pos_retraction = 92
 pause_print_gcode = M600
 print_host = 
 printer_model = 
-printer_notes = v1.2.2
+printer_notes = v1.2.3
 printer_settings_id = 
 printer_technology = FFF
 printer_variant = 
diff --git a/PrusaSlicer/printer/Ender 3 V3 SE.ini b/PrusaSlicer/printer/Ender 3 V3 SE.ini
index 9f40abb..66182a4 100644
--- a/PrusaSlicer/printer/Ender 3 V3 SE.ini	
+++ b/PrusaSlicer/printer/Ender 3 V3 SE.ini	
@@ -47,7 +47,7 @@ parking_pos_retraction = 92
 pause_print_gcode = M600
 print_host = 
 printer_model = 
-printer_notes = v1.2.2
+printer_notes = v1.2.3
 printer_settings_id = 
 printer_technology = FFF
 printer_variant =