From 1113b641fd171621b4137ea1ce950ae96ce6fac4 Mon Sep 17 00:00:00 2001 From: Stefan Rueger Date: Sun, 18 Aug 2024 01:54:37 +0100 Subject: [PATCH] Reformat spacing/comments in src/xbee.h --- src/xbee.h | 21 +++++++++++---------- 1 file changed, 11 insertions(+), 10 deletions(-) diff --git a/src/xbee.h b/src/xbee.h index a12f62b2c..fc6426685 100644 --- a/src/xbee.h +++ b/src/xbee.h @@ -23,22 +23,23 @@ extern const char xbee_desc[]; void xbee_initpgm(PROGRAMMER *pgm); /* - * For non-direct mode (Over-The-Air) we need to issue XBee commands - * to the remote XBee in order to reset the AVR CPU and initiate the - * XBeeBoot bootloader. + * For non-direct mode (Over-The-Air) we need to issue XBee commands to the + * remote XBee in order to reset the AVR CPU and initiate the XBeeBoot + * bootloader. * - * XBee IO port 3 is a somewhat-arbitrarily chosen pin that can be - * connected directly to the AVR reset pin. + * XBee IO port 3 is a somewhat-arbitrarily chosen pin that can be connected + * directly to the AVR reset pin. * - * Note that port 7 was not used because it is the only pin that can - * be used as a CTS flow control output. Port 6 is the only pin that - * can be used as an RTS flow control input. + * Note that port 7 was not used because it is the only pin that can be used as + * a CTS flow control output. Port 6 is the only pin that can be used as an + * RTS flow control input. * - * Some off-the-shelf Arduino shields select a different pin. For - * example this one uses XBee IO port 7. + * Some off-the-shelf Arduino shields select a different pin. For example this + * one uses XBee IO port 7. * * https://wiki.dfrobot.com/Xbee_Shield_For_Arduino__no_Xbee___SKU_DFR0015_ */ + #ifndef XBEE_DEFAULT_RESET_PIN #define XBEE_DEFAULT_RESET_PIN 3 #endif