diff --git a/docs/3D.md b/docs/3D.md
index 97fa0da..8aa718f 100644
--- a/docs/3D.md
+++ b/docs/3D.md
@@ -15,6 +15,20 @@ sidebar_position: 5
 
 Below are some case designs for the Beepy. If you have any designs you'd like to share with the community, please submit a Pull Request to this repo (include a brief description and some renders/pics): [**https://github.com/sqfmi/beepy-hardware**](https://github.com/sqfmi/beepy-hardware).
 
+
+### Clear Sandwich
+[**Buy Now!**](https://shop.sqfmi.com/products/beepy-enclosure-clear-sandwich)
+
+<img src='/img/clear-sandwich-front.jpg' width='300' />
+____
+<img src='/img/clear-sandwich-back.jpg' width='300' />
+<img src='/img/clear-sandwich-dimensions.jpg' width='600' />
+
+#### Instructions
+1. Remove the top screws and the SD card from the Raspberry Pi
+2. Align the back plate and tighten the 9mm screws on top. Make sure the battery is sitting securely. You can use the packaging foam for a snug fit.
+3. Align the front plate and tighten the 5mm screws on top and the 12mm screws in the bottom
+
 ### V1
 V1 design of a Beepy case, suitable for 3D printing, requires some tweaking for a proper fit. Screws are M2.5x5mm.
 <img src='/img/beepy-edc.jpg' width='300' />
@@ -35,8 +49,4 @@ Slim, flat, minimal case for the Beepy
 
 ### CNC Case
 
-Coming Soon
-
-### Transparent Plastic
-
 Coming Soon
\ No newline at end of file
diff --git a/static/img/clear-sandwich-back.jpg b/static/img/clear-sandwich-back.jpg
new file mode 100644
index 0000000..27c1ebf
Binary files /dev/null and b/static/img/clear-sandwich-back.jpg differ
diff --git a/static/img/clear-sandwich-dimensions.jpg b/static/img/clear-sandwich-dimensions.jpg
new file mode 100644
index 0000000..0785b52
Binary files /dev/null and b/static/img/clear-sandwich-dimensions.jpg differ
diff --git a/static/img/clear-sandwich-front.jpg b/static/img/clear-sandwich-front.jpg
new file mode 100644
index 0000000..fa5b7f4
Binary files /dev/null and b/static/img/clear-sandwich-front.jpg differ