Skip to content

Latest commit

 

History

History
91 lines (63 loc) · 2.44 KB

README.md

File metadata and controls

91 lines (63 loc) · 2.44 KB
Raw

Tests Documentation

Unit Tests

To run all unit tests in the NativeUI/tests/unittests dir on a Raspberry Pi or VM, run the following (adjust the full path to your NativeUI directory accordingly):

. .hev_env/bin/activate
export PYTHONPATH=/home/pi/hev/NativeUI
pytest NativeUI/tests/unittests

To run a single unit test file, set the environment as above and specify the test file:

pytest NativeUI/tests/unittests/test_hevclient.py

Integration Tests

To run all integration tests, the Arduino emulator and hevserver processes first need to be running, and then run all integrations tests in the NativeUI/tests/integration dir:

. .hev_env/bin/activate
export PYTHONPATH=/home/pi/hev/NativeUI
./raspberry-dataserver/ArduinoEmulator.py -f raspberry-dataserver/share/B6-20201207.dump &
./raspberry-dataserver/hevserver.py --use-dump-data &
pytest NativeUI/tests/integration

Coverage

To get pytest coverage run from the root of the repo:

pip install pytest-cov
pytest --cov=NativeUI NativeUI

System Tests

Template

Status is marked in the test title with:

  • ❌ for not started
  • 🔶 for WIP
  • ✅ for completed
RiskID Domain Functional Area Standard Reference Assignee
SW Software-GUI Alarms ISO-XX Tim Powell

Scenario: 

GIVEN the <EVENT>
WHEN the <CAUSE>
THEN the <ACTION>

Low Battery Alarm (10 minutes) ❌

RiskID Domain Functional Area Standard Reference Assignee
SW8 Software-GUI Alarms ISO80601-2-12:2020 Tim Powell

Scenario: There is only 10 minutes of battery life left

GIVEN the alarm payload comes in
WHEN the alarm is about the battery
THEN check if the low battery alarm signal is sent
AND THEN the low battery alarm is displayed

High Pressure Alarm to be HIGH Priority 🔶

RiskID Domain Functional Area Standard Reference Assignee
SW11 Software-GUI Alarms ISO80601-2-12:2020 Tim Powell

Scenario: Excessive airway pressure applied

GIVEN the alarm payload received
WHEN the alarm_code: 7
THEN the high priority alarm signal should be sent
AND THEN alarm popup is triggered
AND THEN alarm is added to alarm list