Release v1.3.3 / 5.58.3 #2223
Replies: 9 comments 4 replies
-
|
Thanks for your job David. |
Beta Was this translation helpful? Give feedback.
-
|
The workaround is still running fine for me on this release. |
Beta Was this translation helpful? Give feedback.
-
|
I am sorru Isaak, I checked again and finally it worked fine for me too. |
Beta Was this translation helpful? Give feedback.
-
|
I uninstalled Sandboxie-Plus, Microsoft did it patch Tuesday thing |
Beta Was this translation helpful? Give feedback.
-
|
could you please provide an appropriate kernel dump in order to debug this "ATTEMPT TO SWITCH FROM DPC" issue I would really like to solve this issue as it seams to plage you for some builds already... but to do that I need some cooperation from your side. |
Beta Was this translation helpful? Give feedback.
-
|
I just installed Sandboxie-Plus 1.3.3 and followed your instructions
disable network firewall tracing that is remove all NetFwTrace= from your sandboxie.ini
Alternatively, you could disable WFP support.
16:37 send 1st and then open Chrome
<https://go.sentinelone.com/rs/327-MNM-087/images/nurture.bannerv2.1200x200(1).jpg>
End Point Detection & Response System
Remote Desktop Services
517 Miltwood Dr, Greensboro, NC 27455-2709
(336) 988-0891 ***@***.***> ***@***.***
To subscribe to my FYI emails send an email to
***@***.***> ***@***.***
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out,
and loudly proclaiming...
'Wow! What a ride!’
From: DavidXanatos ***@***.***>
Sent: Wednesday, September 14, 2022 1:23 PM
To: sandboxie-plus/Sandboxie ***@***.***>
Cc: BilleBarrett ***@***.***>; Comment ***@***.***>
Subject: Re: [sandboxie-plus/Sandboxie] Release v1.3.3 / 5.58.3 (Discussion #2223)
could you please provide an appropriate kernel dump in order to debug this "ATTEMPT TO SWITCH FROM DPC" issue
also for testing please disable network firewall tracing that is remove all NetFwTrace= from your sandboxie.ini
Alternatively you could disable WFP support.
I would really like to solve this issue as it seams to plage you for some builds already... but to do that I need some cooperation from your side.
—
Reply to this email directly, view it on GitHub <#2223 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ3MQJKOLKJQPQJYEKNFUA3V6ICWTANCNFSM6AAAAAAQKWIEHQ> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AJ3MQJIEFRNK2236EQQJL3TV6ICWTA5CNFSM6AAAAAAQKWIEHSWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAG6TEI.gif> Message ID: ***@***.*** ***@***.***> >
|
.jpg){kind=link}
Beta Was this translation helpful? Give feedback.
-
|
Just started Sandboxie=Plus 1.3.3 Chrome got the following message SBIE1242 Monitor buffer overflow
<https://go.sentinelone.com/rs/327-MNM-087/images/nurture.bannerv2.1200x200(1).jpg>
End Point Detection & Response System
Remote Desktop Services
517 Miltwood Dr, Greensboro, NC 27455-2709
(336) 988-0891 ***@***.***> ***@***.***
To subscribe to my FYI emails send an email to
***@***.***> ***@***.***
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out,
and loudly proclaiming...
'Wow! What a ride!’
From: DavidXanatos ***@***.***>
Sent: Wednesday, September 14, 2022 1:23 PM
To: sandboxie-plus/Sandboxie ***@***.***>
Cc: BilleBarrett ***@***.***>; Comment ***@***.***>
Subject: Re: [sandboxie-plus/Sandboxie] Release v1.3.3 / 5.58.3 (Discussion #2223)
could you please provide an appropriate kernel dump in order to debug this "ATTEMPT TO SWITCH FROM DPC" issue
also for testing please disable network firewall tracing that is remove all NetFwTrace= from your sandboxie.ini
Alternatively you could disable WFP support.
I would really like to solve this issue as it seams to plage you for some builds already... but to do that I need some cooperation from your side.
—
Reply to this email directly, view it on GitHub <#2223 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ3MQJKOLKJQPQJYEKNFUA3V6ICWTANCNFSM6AAAAAAQKWIEHQ> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AJ3MQJIEFRNK2236EQQJL3TV6ICWTA5CNFSM6AAAAAAQKWIEHSWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAG6TEI.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Monitor buffer overflow, then disable some tracing messages seams you have to much enabled |
Beta Was this translation helpful? Give feedback.
-
|
Got these messages:
SBIE1242 Monitor buffer overflow
Chrome.exe (9576); SBIE2203 Failed to communicate with Sandboxie service connect c00000022
Chrome.exe (9576); SBIE2203 Failed to communicate with Sandboxie "GUIPPTOXY_00000001; Mysid 14 chrome.exe [C00000080]Chrome.exe (9576); SBIE2203 Failed to communicate with Sandboxie "GUIPPTOXY_00000001; Msgid 14 chrome.exe [C00000080]
Chrome.exe (9576); SBIE2203 Failed to communicate with Sandboxie "GUIPPTOXY_00000001; Msgid 14 chrome.exe [C00000080]
Chrome.exe (9576); SBIE2203 Failed to communicate with Sandboxie "GUIPPTOXY_00000001; Msgid 14 chrome.exe [C00000080]
Chrome.exe (9576); SBIE2203 Failed to communicate with Sandboxie "GUIPPTOXY_00000001; Msgid 14 chrome.exe [C00000080]
Chrome.exe (9576); SBIE2203 Failed to communicate with Sandboxie "GUIPPTOXY_00000001; Msgid 14 chrome.exe [C00000080]
Still running
<https://go.sentinelone.com/rs/327-MNM-087/images/nurture.bannerv2.1200x200(1).jpg>
End Point Detection & Response System
Remote Desktop Services
517 Miltwood Dr, Greensboro, NC 27455-2709
(336) 988-0891 ***@***.***> ***@***.***
To subscribe to my FYI emails send an email to
***@***.***> ***@***.***
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out,
and loudly proclaiming...
'Wow! What a ride!’
From: DavidXanatos ***@***.***>
Sent: Wednesday, September 14, 2022 1:23 PM
To: sandboxie-plus/Sandboxie ***@***.***>
Cc: BilleBarrett ***@***.***>; Comment ***@***.***>
Subject: Re: [sandboxie-plus/Sandboxie] Release v1.3.3 / 5.58.3 (Discussion #2223)
could you please provide an appropriate kernel dump in order to debug this "ATTEMPT TO SWITCH FROM DPC" issue
also for testing please disable network firewall tracing that is remove all NetFwTrace= from your sandboxie.ini
Alternatively you could disable WFP support.
I would really like to solve this issue as it seams to plage you for some builds already... but to do that I need some cooperation from your side.
—
Reply to this email directly, view it on GitHub <#2223 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ3MQJKOLKJQPQJYEKNFUA3V6ICWTANCNFSM6AAAAAAQKWIEHQ> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AJ3MQJIEFRNK2236EQQJL3TV6ICWTA5CNFSM6AAAAAAQKWIEHSWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAG6TEI.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
IT now almost 9 pm and my system has not rebooted
<https://go.sentinelone.com/rs/327-MNM-087/images/nurture.bannerv2.1200x200(1).jpg>
End Point Detection & Response System
Remote Desktop Services
517 Miltwood Dr, Greensboro, NC 27455-2709
(336) 988-0891 ***@***.***> ***@***.***
To subscribe to my FYI emails send an email to
***@***.***> ***@***.***
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out,
and loudly proclaiming...
'Wow! What a ride!’
From: DavidXanatos ***@***.***>
Sent: Wednesday, September 14, 2022 1:23 PM
To: sandboxie-plus/Sandboxie ***@***.***>
Cc: BilleBarrett ***@***.***>; Comment ***@***.***>
Subject: Re: [sandboxie-plus/Sandboxie] Release v1.3.3 / 5.58.3 (Discussion #2223)
could you please provide an appropriate kernel dump in order to debug this "ATTEMPT TO SWITCH FROM DPC" issue
also for testing please disable network firewall tracing that is remove all NetFwTrace= from your sandboxie.ini
Alternatively you could disable WFP support.
I would really like to solve this issue as it seams to plage you for some builds already... but to do that I need some cooperation from your side.
—
Reply to this email directly, view it on GitHub <#2223 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ3MQJKOLKJQPQJYEKNFUA3V6ICWTANCNFSM6AAAAAAQKWIEHQ> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AJ3MQJIEFRNK2236EQQJL3TV6ICWTA5CNFSM6AAAAAAQKWIEHSWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAG6TEI.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
Do I have to edit NetFwTrace= from your sandboxie.ini or is there a setting that need to be check or unchecked
517 Miltwood Dr, Greensboro, NC 27455-2709
(336) 988-0891 ***@***.***> ***@***.***
To subscribe to my FYI emails send an email to
***@***.***> ***@***.***
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out,
and loudly proclaiming...
'Wow! What a ride!’
From: DavidXanatos ***@***.***>
Sent: Thursday, September 15, 2022 2:38 AM
To: sandboxie-plus/Sandboxie ***@***.***>
Cc: BilleBarrett ***@***.***>; Comment ***@***.***>
Subject: Re: [sandboxie-plus/Sandboxie] Release v1.3.3 / 5.58.3 (Discussion #2223)
Monitor buffer overflow, then disable some tracing messages seams you have to much enabled
—
Reply to this email directly, view it on GitHub <#2223 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ3MQJNZ4PHBPDESORD5RATV6K75HANCNFSM6AAAAAAQKWIEHQ> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AJ3MQJL3ZDODHXNIVNQKHE3V6K75HA5CNFSM6AAAAAAQKWIEHSWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAG62T4.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
|
I also, that was what I saw when it blue screened, sometime it just plain
reboots.
I am considering install my windows 11 pro again and reinstall all my
software to remove that variable.
I have run hardware diags but nothing failed
…On Wed, Sep 14, 2022, 13:22 DavidXanatos ***@***.***> wrote:
could you please provide an appropriate kernel dump in order to debug this
"ATTEMPT TO SWITCH FROM DPC" issue
also for testing please disable network firewall tracing that is remove
all NetFwTrace= from your sandboxie.ini
Alternatively you could disable WFP support.
I would really like to solve this issue as it seams to plage you for some
builds already... but to do that I need some cooperation from your side.
—
Reply to this email directly, view it on GitHub
<#2223 (reply in thread)>,
or unsubscribe
<https://github.com/notifications/unsubscribe-auth/AJ3MQJKOLKJQPQJYEKNFUA3V6ICWTANCNFSM6AAAAAAQKWIEHQ>
.
You are receiving this because you commented.Message ID:
***@***.***
com>
|
Beta Was this translation helpful? Give feedback.
-
|
Should tracing be turned off completely, I was under the impression it was a tool to help you see what is going on with Sandboxie-Plus
Bill
<https://go.sentinelone.com/rs/327-MNM-087/images/nurture.bannerv2.1200x200(1).jpg>
End Point Detection & Response System
Remote Desktop Services
517 Miltwood Dr, Greensboro, NC 27455-2709
(336) 988-0891 ***@***.***> ***@***.***
To subscribe to my FYI emails send an email to
***@***.***> ***@***.***
Life is not a journey to the grave with the intention of arriving safely in a pretty and well-preserved body, but rather to skid in broadside, thoroughly used up, totally worn out,
and loudly proclaiming...
'Wow! What a ride!’
From: DavidXanatos ***@***.***>
Sent: Thursday, September 15, 2022 2:38 AM
To: sandboxie-plus/Sandboxie ***@***.***>
Cc: BilleBarrett ***@***.***>; Comment ***@***.***>
Subject: Re: [sandboxie-plus/Sandboxie] Release v1.3.3 / 5.58.3 (Discussion #2223)
Monitor buffer overflow, then disable some tracing messages seams you have to much enabled
—
Reply to this email directly, view it on GitHub <#2223 (reply in thread)> , or unsubscribe <https://github.com/notifications/unsubscribe-auth/AJ3MQJNZ4PHBPDESORD5RATV6K75HANCNFSM6AAAAAAQKWIEHQ> .
You are receiving this because you commented. <https://github.com/notifications/beacon/AJ3MQJL3ZDODHXNIVNQKHE3V6K75HA5CNFSM6AAAAAAQKWIEHSWGG33NNVSW45C7OR4XAZNRIRUXGY3VONZWS33OINXW23LFNZ2KUY3PNVWWK3TUL5UWJTQAG62T4.gif> Message ID: ***@***.*** ***@***.***> >
|
Beta Was this translation helpful? Give feedback.
-
This build fixes various issues and adds various minor improvements.
You can support the project through donations, any help will be greatly appreciated.
If you have issues with an update installation, just uninstall the previous version keeping the sandboxie.ini and reinstall the new build.
Changelog
Added
-- usage: in "HKLM\SYSTEM\CurrentControlSet\Services\SbieSvc" add REG_SZ "LogFile" with "3;[path]\Sandboxie.log"
-- usage: DenyHostAccess=Program.exe,y
-- note: by default, this protection only applies for write access, that is, unsandboxed processes will still be able to obtain read-only access
-- to prevent host processes from obtaining read access, ConfidentialBox=y must also be set, which require a supporter certificate
Changed
Fixed
Removed
This discussion was created from the release Release v1.3.3 / 5.58.3.
Beta Was this translation helpful? Give feedback.
All reactions