diff --git a/.github/workflows/FastTest.yml b/.github/workflows/FastTest.yml
index 24a52af..a6b58bf 100644
--- a/.github/workflows/FastTest.yml
+++ b/.github/workflows/FastTest.yml
@@ -4,7 +4,7 @@
 name: Fast Test
 
 on:
-  push: 
+  push:
     branches-ignore:
       - develop
       - master
diff --git a/test/unit/fetch_command_output.cfg b/test/unit/fetch_command_output.cfg
new file mode 100644
index 0000000..cd11f46
--- /dev/null
+++ b/test/unit/fetch_command_output.cfg
@@ -0,0 +1,47 @@
+# Config file for utility 'fetch_command_output.sh'
+#
+# This will help you to make bunch of command output files for napalm drivers unit tests
+#
+# There is not any IP, MAC or names obfuscation or anonymizations!
+# Before using outputs as a unit test files it is recommendet to protect
+# your privacy information yourself by editing output files.
+
+# Required variables
+# $INTERFACE - for detailed interface information
+# $LLDPINTERFACE - for detailed LLDP information
+
+# Define empty array of commands
+COMMANDS=()
+
+# This is example set of commands for napalm driver 's350' (Cisco SMB)
+
+# system info
+COMMANDS+=("show version")
+COMMANDS+=("show system")
+COMMANDS+=("show inventory")
+
+# config commands
+COMMANDS+=("show startup-config")
+COMMANDS+=("show running-config")
+COMMANDS+=("show running-config detailed")
+
+# interface commands
+COMMANDS+=("show interfaces status")
+COMMANDS+=("show interfaces description")
+COMMANDS+=("show interface switchport $INTERFACE")
+COMMANDS+=("show ports jumbo-frame")
+
+# ip commands
+COMMANDS+=("show hosts")
+COMMANDS+=("show ip interface")
+COMMANDS+=("show ipv6 interface brief")
+COMMANDS+=("show arp")
+
+# lldp commands
+COMMANDS+=("show lldp neighbors")
+COMMANDS+=("show lldp local $LLDPINTERFACE")
+COMMANDS+=("show lldp neighbors $LLDPINTERFACE")
+
+# ntp commands
+COMMANDS+=("show sntp status")
+
diff --git a/test/unit/fetch_command_output.sh b/test/unit/fetch_command_output.sh
new file mode 100755
index 0000000..ee0e032
--- /dev/null
+++ b/test/unit/fetch_command_output.sh
@@ -0,0 +1,157 @@
+#!/bin/bash
+
+# Defaults
+DEF_FORCE="n"
+#DEF_METHOD="cli" - nice with --method-kwargs "commands=['show ip interface']"
+# but output is JSON
+DEF_METHOD="_send_command"
+
+# mocked data dir
+MDDIR="mocked_data"
+# command output dir
+CODIR="command_output"
+# config
+CMDIN="./$(basename $0 .sh ).cfg"
+
+GETOPTS=":hu:p:ft:m:i:l:v:d:"                                                   
+function usage() {                                                           
+    MSG="usage: $(basename $0) [-h] -u USERNAME -p PASSWORD [-f]\n"
+    MSG+="          [-m METHOD] -i INTERFACE -l LLDP_INTERFACE\n"
+    MSG+="          -t TYPE -v VENDOR -d DEVICE [SINGLE_COMMAND]\n"
+    MSG+="\n"
+    MSG+="   This utility helps to get output of commands from device.\n"
+    MSG+="     Set of commands can be configured in '$CMDIN'\n"
+    MSG+="     Command output is saved to '$CODIR/DEVICE_TYPE/command_out.txt'\n"
+    MSG+="     and by default is not to be overwriten.\n"
+    MSG+="\n"
+    MSG+="   There is not any IP, MAC or names obfuscation or anonymizations!\n"
+    MSG+="   Before using as a unit test files it is recommendet to protect\n"
+    MSG+="   your privacy information yourself by editing output files\n"
+    MSG+="   in '$CODIR/DEVICE_TYPE/command_out.txt'!\n"
+    MSG+="\n"
+    MSG+="   -h           - this help\n"
+    MSG+="   -u USERNAME  - login username (or env DEVUSERNAME)\n"
+    MSG+="   -p PASSWORD  - login password (or env DEVPASSWORD)\n"
+    MSG+="   -f           - overwrite already downloaded output files\n"
+    MSG+="   -t TYPE      - device type\n"
+    MSG+="   -m METHOD    - what method sends command to device (def '$DEF_METHOD')\n"
+    MSG+="   -i INTERFACE - interface for deailed info (see '$CMDIN')\n"
+    MSG+="   -l INTERFACE - interface for deailed lldp info (see '$CMDIN')\n"
+    MSG+="   -v VENDOR    - vendor napalm driver\n"
+    MSG+="   -d DEVICE    - device to connect\n"
+                                                                             
+    [[ -n $@ ]] && echo -e "\n###  $@  ###\n" >&2
+
+    echo -e "$MSG" >&2                                                          
+    exit 127                                                                 
+}                                                                            
+
+
+# Parse options
+# No run without options
+if ( ! getopts $GETOPTS opt); then # CLI bez options
+    usage "Options needed !!!"
+fi
+OPTIND=1 # reset index
+
+# Preset defaults
+FORCE="$DEF_FORCE"
+METHOD="$DEF_METHOD"
+
+while getopts $GETOPTS opt; do
+    #echo $opt;
+
+    case "$opt" in
+        'u')
+            DEVUSERNAME=$OPTARG ;;
+
+        'p')
+            DEVPASSWORD=$OPTARG ;;
+
+        't')
+            TYPE=$OPTARG ;;
+
+        'i')
+            INTERFACE=$OPTARG ;;
+
+        'l')
+            LLDPINTERFACE=$OPTARG ;;
+
+        'v')
+            VENDOR=$OPTARG ;;
+
+        'm')
+            METHOD=$OPTARG ;;
+
+        'd')
+            DEVICE=$OPTARG ;;
+
+        'f')
+            FORCE='y' ;;
+
+        'h')
+            usage ;;
+
+        ':')
+            usage "Parameter '-$OPTARG' needs value."
+            ;;
+
+        '?'|*)
+            usage "Unknown parameter '-$OPTARG' ."
+            ;;
+    esac
+done
+
+
+# read commands from file
+[ -f "$CMDIN" ] || usage "File '$CMDIN' does not exists."
+[ -r "$CMDIN" ] || usage "Can not read file '$CMDIN'."
+
+[ -z "$INTERFACE" ]     && usage "Parameter -i needed"
+[ -z "$LLDPINTERFACE" ] && usage "Parameter -l needed"
+
+. "${CMDIN}"
+
+# Get possible last arg and set it as only command
+shift $(($OPTIND - 1))
+[ -z "$1" ] || COMMANDS=("$1")
+
+[ -z "$DEVUSERNAME" ]   && usage "Parameter -u needed"
+[ -z "$DEVPASSWORD" ]   && usage "Parameter -p needed"
+[ -z "$TYPE" ]          && usage "Parameter -t needed"
+[ -z "$VENDOR" ]        && usage "Parameter -v needed"
+[ -z "$DEVICE" ]        && usage "Parameter -d needed"
+
+# ensure directory structure exists
+[ -d "$CODIR" ] || usage "Output directory '$CODIR' does not exist."
+[ -w "$CODIR" ] || usage "Output directory '$CODIR' is not writeable."
+
+mkdir -p "$CODIR/$TYPE" || usage "Can not make directory '$CODIR/$TYPE'"
+[ -w "$CODIR/$TYPE" ] || usage "Output directory '$CODIR/$TYPE' is not writeable."
+
+echo "########## Generate output for type $TYPE ##########"
+# lets get commands outputs
+OLDIFS="$IFS"
+IFS=$'\t\n'
+for CMD in ${COMMANDS[@]}
+do
+    IFS="$OLDIFS"
+
+    CMDSTR=${CMD// /_}
+    CMDSTR=${CMDSTR//-/_}
+    CMDSTR=${CMDSTR/\\/_}
+    CMDSTR=${CMDSTR/./_}
+    CMDSTR=${CMDSTR////_}
+    CMDFILE="$CODIR/$TYPE/${CMDSTR}.txt"
+
+    # skip already fetched command outputs
+    if [ -f "$CMDFILE" -a "$FORCE" = "n" ]; then
+        echo "###### Skiping '$CMD'. File '$CMDFILE' exists"
+        continue
+    fi
+
+    echo "## Fetching '$CMD' to '$CMDSTR.txt'"
+    # --debug
+    echo -e "$(napalm --user "$DEVUSERNAME" --password "$DEVPASSWORD" --vendor "$VENDOR" "$DEVICE" call --method-kwargs "command='$CMD'" "$METHOD" | sed 's/^"//;s/"$//;s/\\"/"/g')" > "$CMDFILE"
+done
+