From 2c2589f7c7ed8c5444a75b2af8a5cded933c0c5a Mon Sep 17 00:00:00 2001 From: Martin Pittermann Date: Mon, 3 Oct 2022 10:02:45 +0200 Subject: [PATCH] Update uCNC settings descriptions This was part of #169, thanks @Paciente8159 --- OpenCNCPilot/Resources/ucnc_setting_codes_en_US.csv | 4 ++-- 1 file changed, 2 insertions(+), 2 deletions(-) diff --git a/OpenCNCPilot/Resources/ucnc_setting_codes_en_US.csv b/OpenCNCPilot/Resources/ucnc_setting_codes_en_US.csv index b11f801..67f3eb6 100644 --- a/OpenCNCPilot/Resources/ucnc_setting_codes_en_US.csv +++ b/OpenCNCPilot/Resources/ucnc_setting_codes_en_US.csv @@ -3,8 +3,8 @@ "1","Step idle delay","milliseconds","Sets a short hold delay when stopping to let dynamics settle before disabling steppers. Value 255 keeps motors enabled with no delay." "2","Step pulse invert","mask","Inverts the step signal. Set axis bit to invert (00000ZYX)." "3","Step direction invert","mask","Inverts the direction signal. Set axis bit to invert (00000ZYX)." -"4","Invert step enable pin","boolean","Inverts the stepper driver enable pin signal." -"5","Invert limit pins","boolean","Inverts the all of the limit input pins." +"4","Invert step enable pin","mask","Inverts the stepper driver enable pin signal." +"5","Invert limit pins","mask","Inverts the limit input pins." "6","Invert probe pin","boolean","Inverts the probe input pin signal." "7","Invert control pins","mask","Inverts the control input pins signal. Bit 0 (Emergency stop) has no effect." "10","Status report options","mask","Alters data included in status reports."