Skip to content

Latest commit

 

History

History
18 lines (11 loc) · 1.02 KB

ReadMe.md

File metadata and controls

18 lines (11 loc) · 1.02 KB

SEGGER downloaded Software

  • Check in the Internet for newer versions.

JLink

  • Download and install J-LinkSoftwareAndDocumentationPack or simply use JLinkRTTLogger.exe and accompanying JLinkARM.dll copied from default install location C:\Program Files (x86)\SEGGER\JLink. Both files are inside JLinkRTTLogger.zip You need to put to a location in $PATH or extend $PATH.

SEGGER_RTT

  • Target code is expected inside SEGGER_RTT. This is the extracted SEGGER_RTT_V....zip.
  • Optionally check for a newer version.

STLinkReflash_190812.zip

  • Tool for exchanging ST-LINK and J-LINK software on STM32 evaluation boards.
    • Works not for v3 Hardware but well for v2 Hardware.
    • In case of not accepting the ST-Link firmware use ../st.com/en.stsw-link007_V2-37-26.zip for updating the ST-Link firmware first. It could be you need to exchange the ST-Link firmware variant into the variant with mass storage.