Skip to content

Latest commit

 

History

History
88 lines (84 loc) · 3.49 KB

README.md

File metadata and controls

88 lines (84 loc) · 3.49 KB
Raw

Setting up FRIDA in Termux

Introduction

This guide will help you install and set up enviroment for FRIDA in Termux.

Requirements

  • A rooted Android device
  • Termux installed on your Android device
  • Install Termux according to the architecture of your device here.

To Start with Termux

  • Grant storage permission to Termux by using this command:
$ termux-setup-storage
  • Update and install all required dependencies in Termux.
$ pkg update
$ pkg install python tsu -y

Guide to Installing FRIDA

  1. First, create a folder named frida-devkit and navigate to that directory using 'cd frida-devkit'.
  2. Download the Frida-core devkit here.
  • Select based on the architecture of your device.
  • I recommend using wget to download from the releases page.
$ wget https://github.com/frida/frida/releases/latest/download/frida-devkit-android-ARCH-VERSION.tar.xz
  • Replace ARCH with the architecture of your device.
  • Replace VERSION with the version number of the latest release.
  1. After downloading the devkit, extract its contents using the following command:
tar -xfv frida-devkit-android-ARCH-VERSION.tar.xz
  • Again, replace ARCH with the architecture of your device.
  • Also, replace VERSION with the version number of the devkit you downloaded.
  1. Install frida and frida-tools using pip with following command:
$ FRIDA_CORE_DEVKIT=$PWD pip install frida frida-tools
  • Make sure you are in the frida-devkit directory and that the Frida devkit has been extracted in the same directory
  1. Congratulations, Frida has been successfully installed on Termux!

How to setup FRIDA-SERVER

  1. Download Frida-server from releases here.
  • Again, I recommend using wget to download from the releases page.
$ wget https://github.com/frida/frida/releases/latest/download/frida-server-android-ARM-VERSION.tar.xz
  • Replace ARCH with the architecture of your device.
  • Replace VERSION with the version number of the latest release.
  1. After downloading frida-server, extract it and rename the result to frida-server using the following command:
$ mv frida-server-android-ARCH-VERSION frida-server
  • Again, Replace ARCH with the architecture of your device.
  • Replace VERSION with the version number of the frida-server you downloaded.
  1. give 755 permission to the frida-server file using the chmod command, run the following command:
chmod 755 frida-server
  • This will set the file permissions to allow the owner to read, write, and execute the file, and allow others to read and execute the file.
  1. then move frida-server to $PREFIX/bin by following command $ mv frida-server $PREFIX/bin
  2. Now, frida-server is ready to be fired up.

How to use

  1. Enter root mode using tsu command
$ tsu
  1. Navigate to the /data/local/tmp directory, use the following command:
$ cd /data/local/tmp/
  1. Run frida-server, using command:
$ frida-server --listen=localhost:27042 -C
  1. Open a new session on Termux, swipe the left side of the screen and open a new session. You can then use Frida in the new session.
  2. For using frida with frida-server you need use -H options. ex:
  • spawn mode
$ frida -H localhost:27042 -f package.name -l your_script.js
  • attach mode
$ frida -H localhost:27042 -n AppName -l your_script.js