WiFiWebClientRepeating.ino

/****************************************************************************************************************************
  WiFiWebClientRepeating.ino

  This sketch connects to a a web server and makes a request
  using a WiFi equipped Arduino board.

  created 23 April 2012
  modified 31 May 2012
  by Tom Igoe
  modified 13 Jan 2014
  by Federico Vanzati

  http://www.arduino.cc/en/Tutorial/WifiWebClientRepeating
  This code is in the public domain.

  Based on and modified from WiFiNINA library https://www.arduino.cc/en/Reference/WiFiNINA
  to support nRF52, SAMD21/SAMD51, STM32F/L/H/G/WB/MP1, Teensy, etc. boards besides Nano-33 IoT, MKRWIFI1010, MKRVIDOR400, etc.

  Built by Khoi Hoang https://github.com/khoih-prog/WiFiNINA_Generic
  Licensed under MIT license

  Copyright (c) 2018 Arduino SA. All rights reserved.
  Copyright (c) 2011-2014 Arduino LLC.  All right reserved.

  This library is free software; you can redistribute it and/or
  modify it under the terms of the GNU Lesser General Public
  License as published by the Free Software Foundation; either
  version 2.1 of the License, or (at your option) any later version.

  This library is distributed in the hope that it will be useful,
  but WITHOUT ANY WARRANTY; without even the implied warranty of
  MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
  Lesser General Public License for more details.

  You should have received a copy of the GNU Lesser General Public
  License along with this library; if not, write to the Free Software
  Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
*****************************************************************************************************************************/

#include "defines.h"
#include "arduino_secrets.h"

// To eliminate FW warning when using not latest nina-fw version
// To use whenever WiFi101-FirmwareUpdater-Plugin is not sync'ed with nina-fw version
#define WIFI_FIRMWARE_LATEST_VERSION        "1.4.8"

#include <SPI.h>

#if USING_WIFI101
  #include <WiFi101_Generic.h>
#else
  #include <WiFiNINA_Generic.h>
#endif

///////please enter your sensitive data in the Secret tab/arduino_secrets.h
char ssid[] = SECRET_SSID;        // your network SSID (name)
char pass[] = SECRET_PASS;        // your network password (use for WPA, or use as key for WEP), length must be 8+

int keyIndex = 0;                 // your network key Index number (needed only for WEP)

int status = WL_IDLE_STATUS;

// Initialize the Wifi client library
WiFiClient client;

// server address:
char server[] = "arduino.tips";

unsigned long lastConnectionTime = 0;            // last time you connected to the server, in milliseconds
const unsigned long postingInterval = 10L * 1000L; // delay between updates, in milliseconds

void setup()
{
  //Initialize serial and wait for port to open:
  Serial.begin(115200);

  while (!Serial && millis() < 5000);

  Serial.print(F("\nStart WiFiWebClientRepeating on "));
  Serial.println(BOARD_NAME);

// check for the WiFi module:
#if USING_WIFI101
  if (WiFi.status() == WL_NO_SHIELD)
#else
  Serial.println(WIFININA_GENERIC_VERSION);
  
  if (WiFi.status() == WL_NO_MODULE)
#endif
  {
    Serial.println(F("Communication with WiFi module failed!"));

    // don't continue
    while (true);
  }

  String fv = WiFi.firmwareVersion();

  if (fv < WIFI_FIRMWARE_LATEST_VERSION)
  {
    Serial.print(F("Your current firmware NINA FW v"));
    Serial.println(fv);
    Serial.print(F("Please upgrade the firmware to NINA FW v"));
    Serial.println(WIFI_FIRMWARE_LATEST_VERSION);
  }

  // attempt to connect to Wifi network:
  while (status != WL_CONNECTED)
  {
    Serial.print(F("Attempting to connect to SSID: "));
    Serial.println(ssid);
    // Connect to WPA/WPA2 network. Change this line if using open or WEP network:
    status = WiFi.begin(ssid, pass);

    // wait 10 seconds for connection:
    //delay(10000);
  }

  // you're connected now, so print out the status:
  printWiFiStatus();
}

void loop()
{
  // if there's incoming data from the net connection.
  // send it out the serial port.  This is for debugging
  // purposes only:
  while (client.available())
  {
    char c = client.read();
    Serial.write(c);
  }

  // if ten seconds have passed since your last connection,
  // then connect again and send data:
  if (millis() - lastConnectionTime > postingInterval)
  {
    httpRequest();
  }
}

// this method makes a HTTP connection to the server:
void httpRequest()
{
  // close any connection before send a new request.
  // This will free the socket on the Nina module
  client.stop();

  // if there's a successful connection:
  if (client.connect(server, 80))
  {
    Serial.println(F("Connected to server"));
    // Make a HTTP request:
    client.println(F("GET /asciilogo.txt HTTP/1.1"));
    client.println("Host: arduino.tips");
    client.println("Connection: close");
    client.println();

    // note the time that the connection was made:
    lastConnectionTime = millis();
  }
  else
  {
    // if you couldn't make a connection:
    Serial.println(F("Connection failed"));
  }
}

void printWiFiStatus()
{
  // print the SSID of the network you're attached to:
  Serial.print(F("SSID: "));
  Serial.println(WiFi.SSID());

  // print your board's IP address:
  IPAddress ip = WiFi.localIP();
  Serial.print(F("IP Address: "));
  Serial.println(ip);

  // print the received signal strength:
  long rssi = WiFi.RSSI();
  Serial.print(F("Signal strength (RSSI):"));
  Serial.print(rssi);
  Serial.println(F(" dBm"));
}