MQTT_ThingStream.ino

/****************************************************************************************************************************
  MQTT_ThingStream.ino - Dead simple MQTT Client for Ethernet shields

  EthernetWebServer is a library for the Ethernet shields to run WebServer
  
  Based on and modified from ESP8266 https://github.com/esp8266/Arduino/releases
  Built by Khoi Hoang https://github.com/khoih-prog/EthernetWebServer
  Licensed under MIT license
 *****************************************************************************************************************************/
/*
  Basic MQTT example (without SSL!)
  This sketch demonstrates the basic capabilities of the library.
  It connects to an MQTT server then:
  - publishes {Hello from MQTTClient_SSL on NUCLEO_F767ZI} to the topic [STM32_Pub]
  - subscribes to the topic [STM32_Sub], printing out any messages
    it receives. NB - it assumes the received payloads are strings not binary
  It will reconnect to the server if the connection is lost using a blocking
  reconnect function. See the 'mqtt_reconnect_nonblocking' example for how to
  achieve the same result without blocking the main loop.

  You will need to populate "certificates.h" with your trust anchors
  (see https://github.com/OPEnSLab-OSU/SSLClient/blob/master/TrustAnchors.md)
  and my_cert/my_key with your certificate/private key pair
  (see https://github.com/OPEnSLab-OSU/SSLClient#mtls).
*/

#include "defines.h"

#include <PubSubClient.h>

const char my_cert[]  = "FIXME";
const char my_key[]   = "FIXME";

#define USING_THINGSTREAM_IO      false //true

#if USING_THINGSTREAM_IO

const char *MQTT_PREFIX_TOPIC   = "esp32-sniffer/";
const char *MQTT_ANNOUNCE_TOPIC = "/status";
const char *MQTT_CONTROL_TOPIC  = "/control";
const char *MQTT_BLE_TOPIC      = "/ble";


// GOT FROM ThingsStream!
const char *MQTT_SERVER     = "mqtt.thingstream.io";
const char *MQTT_USER       = "MQTT_USER";
const char *MQTT_PASS       = "MQTT_PASS";
const char *MQTT_CLIENT_ID  = "MQTT_CLIENT_ID";

String topic    = MQTT_PREFIX_TOPIC + String("12345678") + MQTT_BLE_TOPIC;
String subTopic = MQTT_PREFIX_TOPIC + String("12345678") + MQTT_BLE_TOPIC;

#else

const char* MQTT_SERVER = "broker.emqx.io";        // Broker address

const char*  ID         = "MQTTClient_SSL-Client";  // Name of our device, must be unique
String      topic       = "MQTT_Pub";              // Topic to subcribe to
String      subTopic    = "MQTT_Sub";              // Topic to subcribe to

#endif

void mqtt_receive_callback(char* topic, byte* payload, unsigned int length);

const int   MQTT_PORT           = 1883; //if you use SSL //1883 no SSL

unsigned long lastMsg = 0;

int status = WL_IDLE_STATUS;      // the Wifi radio's status

// Initialize the SSL client library
// Arguments: EthernetClient, our trust anchors


ESP8266_AT_Client  espClient;

PubSubClient client(MQTT_SERVER, MQTT_PORT, mqtt_receive_callback, espClient);

/*
   Called whenever a payload is received from a subscribed MQTT topic
*/
void mqtt_receive_callback(char* topic, byte* payload, unsigned int length) 
{
  Serial.print("MQTT Message received [");
  Serial.print(topic);
  Serial.print("] ");
  
  for (unsigned int i = 0; i < length; i++) 
  {
    Serial.print((char)payload[i]);
  }
  
  Serial.println();
}

void reconnect() 
{
  static String data = "Hello from MQTTClient_ThingSteam on " + String(BOARD_NAME);
  
  // Loop until we're reconnected
  while (!client.connected()) 
  {
    Serial.print("Attempting MQTT connection to ");
    Serial.println(MQTT_SERVER);

    // Attempt to connect

#if USING_THINGSTREAM_IO
    int connect_status = client.connect(MQTT_CLIENT_ID, MQTT_USER, MQTT_PASS, topic.c_str(), 2, false, "");
#else
    int connect_status = client.connect(ID);
#endif

    if (connect_status)                                
    {
      Serial.println("...connected");
      
      // Once connected, publish an announcement...
      client.publish(topic.c_str(), data.c_str());

      Serial.println("Published connection message successfully!");
     
      Serial.print("Subcribed to: ");
      Serial.println(subTopic);
      
      client.subscribe(subTopic.c_str());
      // for loopback testing
      client.subscribe(topic.c_str());
    } 
    else 
    {
      Serial.print("failed, rc=");
      Serial.print(client.state());
      Serial.println(" try again in 5 seconds");
      
      // Wait 5 seconds before retrying
      delay(5000);
    }
  }
}

void printWifiStatus()
{
  // print the SSID of the network you're attached to:
  // you're connected now, so print out the data
  Serial.print(F("You're connected to the network, IP = "));
  Serial.println(WiFi.localIP());

  Serial.print(F("SSID: "));
  Serial.print(WiFi.SSID());

  // print the received signal strength:
  int32_t rssi = WiFi.RSSI();
  Serial.print(F(", Signal strength (RSSI): "));
  Serial.print(rssi);
  Serial.println(F(" dBm"));
}

void setup()
{
  // Open serial communications and wait for port to open:
  Serial.begin(115200);
  while (!Serial && millis() < 5000);

  Serial.print(F("\nStarting MQTT_ThingStream on ")); Serial.print(BOARD_NAME);
  Serial.print(F(" with ")); Serial.println(SHIELD_TYPE); 
  Serial.println(ESP8266_AT_WEBSERVER_VERSION);

  // initialize serial for ESP module
  EspSerial.begin(115200);
  // initialize ESP module
  WiFi.init(&EspSerial);

  Serial.println(F("WiFi shield init done"));

  // check for the presence of the shield
  if (WiFi.status() == WL_NO_SHIELD)
  {
    Serial.println(F("WiFi shield not present"));
    // don't continue
    while (true);
  }

  // attempt to connect to WiFi network
  while ( status != WL_CONNECTED)
  {
    Serial.print(F("Connecting to SSID: "));
    Serial.println(ssid);
    // Connect to WPA/WPA2 network
    status = WiFi.begin(ssid, pass);
  }

  // you're connected now, so print out the data
  printWifiStatus();

  // Note - the default maximum packet size is 256 bytes. If the
  // combined length of clientId, username and password exceed this use the
  // following to increase the buffer size:
  //client.setBufferSize(256);
  
  Serial.println("***************************************");
  Serial.println(topic);
  Serial.println("***************************************");
}

#define MQTT_PUBLISH_INTERVAL_MS      10000L

String data         = "Hello from MQTT_ThingStream on " + String(BOARD_NAME) + " with " + String(SHIELD_TYPE);
const char *pubData = data.c_str();

void loop() 
{
  static unsigned long now;
  
  if (!client.connected()) 
  {
    reconnect();
  }

  // Sending Data
  now = millis();
  
  if (now - lastMsg > MQTT_PUBLISH_INTERVAL_MS)
  {
    lastMsg = now;
    
    client.publish(topic.c_str(), pubData);

    Serial.print("MQTT Message Send : ");
    Serial.print(topic);
    Serial.print(" => ");
    Serial.println(data);
  }
  
  client.loop();
}