KP5L.ini

[vendor]
name = Kingroon
config_version = 0.0.2
config_update_url = https://raw.githubusercontent.com/kanocz/3dconfigs/master/KP5L.ini

[printer_model:KP5L]
name = Kingroon KP5L
variants = 0.8
technology = FFF
family = KP5
bed_model = KP5L-bedshape.stl
default_materials = Generic PLA @KP5L; Generic PETG @KP5L; Generic ABS @KP5L; Generic HIPS @KP5L

# Common print preset
[print:*common*]
avoid_crossing_perimeters = 0
bridge_acceleration = 250
bridge_angle = 0
bridge_flow_ratio = 0.95
bridge_speed = 25
brim_width = 0
clip_multipart_objects = 1
compatible_printers_condition = printer_model=~/(KP5L).*/ and nozzle_diameter[0]==0.8
complete_objects = 0
default_acceleration = 500
dont_support_bridges = 1
elefant_foot_compensation = 0.1
ensure_vertical_shell_thickness = 1
external_fill_pattern = rectilinear
external_perimeters_first = 0
external_perimeter_extrusion_width = 0.90
external_perimeter_speed = 25
extra_perimeters = 0
extruder_clearance_height = 34
extruder_clearance_radius = 47
extrusion_width = 0.90
fill_angle = 45
fill_density = 15%
fill_pattern = grid
first_layer_extrusion_width = 0.84
first_layer_height = 0.2
first_layer_speed = 20
gap_fill_speed = 30
gcode_comments = 0
infill_every_layers = 1
infill_extruder = 1
infill_extrusion_width = 0.90
infill_first = 0
infill_only_where_needed = 0
infill_overlap = 25%
infill_speed = 50
interface_shells = 0
max_print_speed = 100
max_volumetric_extrusion_rate_slope_negative = 0
max_volumetric_extrusion_rate_slope_positive = 0
max_volumetric_speed = 0
min_skirt_length = 4
notes = 
overhangs = 0
only_retract_when_crossing_perimeters = 0
ooze_prevention = 0
output_filename_format = {input_filename_base}_{print_time}_{layer_height}_{filament_type[0]}_{printer_model}.gcode
perimeters = 2
perimeter_extruder = 1
perimeter_extrusion_width = 0.90
perimeter_speed = 40
post_process = 
print_settings_id = 
raft_layers = 0
resolution = 0
seam_position = nearest
single_extruder_multi_material_priming = 0
skirts = 1
skirt_distance = 3
skirt_height = 2
small_perimeter_speed = 25
solid_infill_below_area = 0
solid_infill_every_layers = 0
solid_infill_extruder = 1
solid_infill_extrusion_width = 0.90
solid_infill_speed = 40
spiral_vase = 0
standby_temperature_delta = -5
support_material = 0
support_material_extruder = 0
support_material_extrusion_width = 0.78
support_material_interface_extruder = 0
support_material_angle = 0
support_material_buildplate_only = 0
support_material_enforce_layers = 0
support_material_contact_distance = 0.15
support_material_interface_contact_loops = 0
support_material_interface_layers = 2
support_material_interface_spacing = 0.2
support_material_interface_speed = 100%
support_material_pattern = rectilinear
support_material_spacing = 2
support_material_speed = 40
support_material_synchronize_layers = 0
support_material_threshold = 40
support_material_with_sheath = 0
support_material_xy_spacing = 60%
thin_walls = 0
top_infill_extrusion_width = 0.8
top_solid_infill_speed = 30
travel_speed = 150
wipe_tower = 0
wipe_tower_bridging = 10
wipe_tower_rotation_angle = 0
wipe_tower_width = 60
wipe_tower_x = 170
wipe_tower_y = 140
xy_size_compensation = 0

[print:0.16mm @KP5L]
inherits = *common*
layer_height = 0.16
bottom_solid_layers = 5
top_solid_layers = 7
bridge_flow_ratio = 0.85

[print:0.20mm @KP5L]
inherits = *common*
layer_height = 0.20
bottom_solid_layers = 4
top_solid_layers = 5

[print:0.24mm @KP5L]
inherits = *common*
layer_height = 0.24
top_infill_extrusion_width = 0.90
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.28mm @KP5L]
inherits = *common*
layer_height = 0.28
top_infill_extrusion_width = 0.90
bottom_solid_layers = 3
top_solid_layers = 4

[print:0.40mm @KP5L]
inherits = *common*
layer_height = 0.40
top_infill_extrusion_width = 0.90
bottom_solid_layers = 2
top_solid_layers = 3

[print:0.50mm @KP5L]
inherits = *common*
layer_height = 0.50
top_infill_extrusion_width = 0.90
bottom_solid_layers = 2
top_solid_layers = 3

[filament:*common*]
cooling = 0
compatible_printers = 
extrusion_multiplier = 1
filament_cost = 0
filament_density = 0
filament_diameter = 1.75
filament_notes = ""
filament_settings_id = ""
filament_soluble = 0
min_print_speed = 15
slowdown_below_layer_time = 20
compatible_printers_condition = printer_model=~/(KP5L).*/

[filament:*FLEX*]
inherits = *common*
bridge_fan_speed = 80
cooling = 0
disable_fan_first_layers = 3
extrusion_multiplier = 1.15
fan_always_on = 0
fan_below_layer_time = 100
filament_colour = #008000
filament_max_volumetric_speed = 1.5
filament_type = FLEX
first_layer_bed_temperature = 50
first_layer_temperature = 240
max_fan_speed = 90
min_fan_speed = 70
temperature = 240
filament_retract_length = 0.8
filament_deretract_speed = 25
filament_retract_lift = 0
filament_wipe = 0

[filament:Generic FLEX @KP5L]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 798
filament_density = 1.22
filament_max_volumetric_speed = 1.2

[filament:Fiber3d TPU @KP5L]
inherits = *FLEX*
filament_vendor = Generic
filament_cost = 798
filament_density = 1.22
filament_max_volumetric_speed = 1.2
filament_retract_length = 0.5
filament_retract_speed = 25
first_layer_temperature = 210
temperature = 210
bed_temperature = 55
extrusion_multiplier = 1.10

[filament:PLA @KP5L]
inherits = *common*
bed_temperature = 60
fan_below_layer_time = 100
filament_colour = #DDDDDD
filament_max_volumetric_speed = 15
filament_type = PLA
filament_density = 1.24
filament_cost = 699
filament_vendor = Generic
first_layer_bed_temperature = 60
first_layer_temperature = 210
fan_always_on = 1
cooling = 1
max_fan_speed = 100
min_fan_speed = 100
bridge_fan_speed = 100
disable_fan_first_layers = 1
temperature = 205

[filament:PETG @KP5L]
inherits = *common*
bed_temperature = 70
cooling = 1
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 8
filament_type = PETG
filament_density = 1.27
filament_cost = 699
filament_vendor = Generic
filament_retract_length = 2
first_layer_bed_temperature = 70
first_layer_temperature = 240
fan_always_on = 1
max_fan_speed = 50
min_fan_speed = 20
bridge_fan_speed = 100
temperature = 230

[filament:ABS @KP5L]
inherits = *common*
bed_temperature = 100
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 11
filament_type = ABS
filament_density = 1.04
filament_cost = 699
filament_vendor = Generic
first_layer_bed_temperature = 100
first_layer_temperature = 245
fan_always_on = 1
max_fan_speed = 0
min_fan_speed = 20
bridge_fan_speed = 50
top_fan_speed = 0
temperature = 240

[filament:HIPS @KP5L]
inherits = *common*
bed_temperature = 100
cooling = 0
disable_fan_first_layers = 3
fan_below_layer_time = 20
filament_colour = #DDDDDD
filament_max_volumetric_speed = 11
filament_type = HIPS
filament_density = 1.04
filament_cost = 530
filament_vendor = Generic
first_layer_bed_temperature = 100
first_layer_temperature = 230
fan_always_on = 0
max_fan_speed = 20
min_fan_speed = 20
bridge_fan_speed = 50
top_fan_speed = 0
temperature = 230

[filament:Prusament PLA @KP5L]
inherits = PLA @KP5L
filament_vendor = Prusa Polymers
temperature = 210
bed_temperature = 60
first_layer_temperature = 215
first_layer_bed_temperature = 60
filament_cost = 699
filament_density = 1.24
filament_colour = #F94D0C

[filament:Prusament PETG @KP5L]
inherits = PETG @KP5L
filament_vendor = Prusa Polymers
temperature = 245
bed_temperature = 70
first_layer_temperature = 245
first_layer_bed_temperature = 70
filament_cost = 699
filament_density = 1.27
filament_colour = #F94D0C


# Common printer preset
[printer:*common*]
printer_technology = FFF
before_layer_gcode = ;BEFORE_LAYER_CHANGE\nG92 E0\n;{layer_z}\n\n
between_objects_gcode = 
pause_print_gcode = 
deretract_speed = 40
extruder_colour = #FCE94F
extruder_offset = 0x0
gcode_flavor = marlin
silent_mode = 0
remaining_times = 1
machine_max_acceleration_e = 5000
machine_max_acceleration_extruding = 500
machine_max_acceleration_retracting = 1000
machine_max_acceleration_x = 500
machine_max_acceleration_y = 500
machine_max_acceleration_z = 100
machine_max_feedrate_e = 60
machine_max_feedrate_x = 500
machine_max_feedrate_y = 500
machine_max_feedrate_z = 10
machine_max_jerk_e = 5
machine_max_jerk_x = 8
machine_max_jerk_y = 8
machine_max_jerk_z = 0.4
machine_min_extruding_rate = 0
machine_min_travel_rate = 0
layer_gcode = ;AFTER_LAYER_CHANGE\n;{layer_z}
max_layer_height = 0.50
min_layer_height = 0.16
max_print_height = 250
nozzle_diameter = 0.4
printer_notes = 
printer_settings_id = 
printer_variant = 0.4
retract_before_travel = 2
retract_before_wipe = 70%
retract_layer_change = 1
retract_length = 1
retract_length_toolchange = 1
retract_lift = 0
retract_lift_above = 0
retract_lift_below = 0
retract_restart_extra = 0
retract_restart_extra_toolchange = 0
retract_speed = 60
single_extruder_multi_material = 0
toolchange_gcode = 
use_firmware_retraction = 0
use_relative_e_distances = 1
use_volumetric_e = 0
variable_layer_height = 1
wipe = 1
z_offset = 0
printer_model = 
default_print_profile = 0.16mm @KP5L
default_filament_profile = PLA @KP5L
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\G1 Z50 F240\nG1 X7.6 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X7.9 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0
end_gcode = {if max_layer_z < max_print_height}G1 Z{z_offset+min(max_layer_z+2, max_print_height)} F600 ; Move print head up{endif}\nG1 X5 Y{print_bed_max[1]*0.8} F{travel_speed*60} ; present print\n{if max_layer_z < max_print_height-10}G1 Z{z_offset+min(max_layer_z+70, max_print_height-10)} F600 ; Move print head further up{endif}\n{if max_layer_z < max_print_height*0.6}G1 Z{max_print_height*0.6} F600 ; Move print head further up{endif}\nM140 S0 ; turn off heatbed\nM104 S0 ; turn off temperature\nM107 ; turn off fan\nM84 X Y E ; disable motors

[printer:KP5L]
inherits = *common*
bed_shape = 0x0,310x0,310x290,0x290
max_print_height = 320
printer_model = KP5L
printer_notes = Don't remove the following keywords! These keywords are used in the "compatible printer" condition of the print and filament profiles to link the particular print and filament profiles to this printer profile.\nPRINTER_VENDOR_KINGROON\nPRINTER_MODEL_KP5L\n
start_gcode = G90 ; use absolute coordinates\nM83 ; extruder relative mode\nM140 S{first_layer_bed_temperature[0]} ; set final bed temp\nM104 S150 ; set temporary nozzle temp to prevent oozing during homing and auto bed leveling\nG4 S10 ; allow partial nozzle warmup\nG28 ; home all axis\nG29 ; auto bed levelling\nG1 Z50 F240\nG1 X7.6 Y10 F3000\nM104 S{first_layer_temperature[0]} ; set final nozzle temp\nM190 S{first_layer_bed_temperature[0]} ; wait for bed temp to stabilize\nM109 S{first_layer_temperature[0]} ; wait for nozzle temp to stabilize\nG1 Z0.28 F240\nG92 E0\nG1 Y140 E10 F1500 ; prime the nozzle\nG1 X7.9 F5000\nG92 E0\nG1 Y10 E10 F1200 ; prime the nozzle\nG92 E0