| language | contributors | filename | |||||||||
|---|---|---|---|---|---|---|---|---|---|---|---|
latex |
|
learn-latex.tex |
% All comment lines start with %
% There are no multi-line comments
% LaTeX is NOT a "What You See Is What You Get" word processing software like
% MS Word, or OpenOffice Writer
% Every LaTeX command starts with a backslash (\)
% LaTeX documents start with a defining the type of document it's compiling
% Other document types include book, report, presentations, etc.
% The options for the document appear in the [] brackets. In this case
% it specifies we want to use 12pt font.
\documentclass[12pt]{article}
% Next we define the packages the document uses.
% If you want to include graphics, colored text, or
% source code from another language file into your document,
% you need to enhance the capabilities of LaTeX. This is done by adding packages.
% I'm going to include the float and caption packages for figures.
\usepackage{caption}
\usepackage{float}
% We can define some other document properties too!
\author{Chaitanya Krishna Ande, Colton Kohnke \& Sricharan Chiruvolu}
\date{\today}
\title{Learn LaTeX in Y Minutes!}
% Now we're ready to begin the document
% Everything before this line is called "The Preamble"
\begin{document}
% if we set the author, date, title fields, we can have LaTeX
% create a title page for us.
\maketitle
% Most research papers have abstract, you can use the predefined commands for this.
% This should appear in its logical order, therefore, after the top matter,
% but before the main sections of the body.
% This command is available in the document classes article and report.
\begin{abstract}
LaTeX documentation written as LaTeX! How novel and totally not my idea!
\end{abstract}
% Section commands are intuitive.
% All the titles of the sections are added automatically to the table of contents.
\section{Introduction}
Hello, my name is Colton and together we're going to explore LaTeX!
\section{Another section}
This is the text for another section. I think it needs a subsection.
\subsection{This is a subsection} % Subsections are also intuitive.
I think we need another one
\subsubsection{Pythagoras}
Much better now.
\label{subsec:pythagoras}
% By using the asterisk we can suppress LaTeX's inbuilt numbering.
% This works for other LaTeX commands as well.
\section*{This is an unnumbered section}
However not all sections have to be numbered!
\section{Some Text notes}
LaTeX is generally pretty good about placing text where it should go. If
a line \\ needs \\ to \\ break \\ you add \textbackslash\textbackslash to
the source code. \\
\section{Lists}
Lists are one of the easiest things to create in LaTeX! I need to go shopping
tomorrow, so let's make a grocery list.
\begin{enumerate} % This creates an "enumerate" environment.
% \item tells the enumerate to increment
\item Salad.
\item 27 watermelon.
\item A single jackrabbit.
% we can even override the item number by using []
\item[how many?] Medium sized squirt guns.
Not a list item, but still part of the enumerate.
\end{enumerate} % All environments must have an end.
\section{Math}
One of the primary uses for LaTeX is to produce academic articles or
technical papers. Usually in the realm of math and science. As such,
we need to be able to add special symbols to our paper! \\
Math has many symbols, far beyond what you can find on a keyboard;
Set and relation symbols, arrows, operators, and Greek letters to name a few.\\
Sets and relations play a vital role in many mathematical research papers.
Here's how you state all y that belong to X, $\forall$ x $\in$ X. \\
% Notice how I needed to add $ signs before and after the symbols. This is
% because when writing, we are in text-mode.
% However, the math symbols only exist in math-mode.
% We can enter math-mode from text mode with the $ signs.
% The opposite also holds true. Variable can also be rendered in math-mode.
% We can also enter math mode with \[\]
\[a^2 + b^2 = c^2 \]
My favorite Greek letter is $\xi$. I also like $\beta$, $\gamma$ and $\sigma$.
I haven't found a Greek letter that yet that LaTeX doesn't know about!
Operators are essential parts of a mathematical document:
trigonometric functions ($\sin$, $\cos$, $\tan$),
logarithms and exponentials ($\log$, $\exp$),
limits ($\lim$), etc.
have per-defined LaTeX commands.
Let's write an equation to see how it's done: \\
$\cos(2\theta) = \cos^{2}(\theta) - \sin^{2}(\theta)$
Fractions(Numerator-denominators) can be written in these forms:
% 10 / 7
$^{10}/_{7}$
% Relatively complex fractions can be written as
% \frac{numerator}{denominator}
$\frac{n!}{k!(n - k)!}$ \\
We can also insert equations in an "equation environment".
% Display math with the equation 'environment'
\begin{equation} % enters math-mode
c^2 = a^2 + b^2.
\label{eq:pythagoras} % for referencing
\end{equation} % all \begin statements must have an end statement
We can then reference our new equation!
Eqn.~\ref{eq:pythagoras} is also known as the Pythagoras Theorem which is also
the subject of Sec.~\ref{subsec:pythagoras}. A lot of things can be labeled:
figures, equations, sections, etc.
Summations and Integrals are written with sum and int commands:
% Some LaTeX compilers will complain if there are blank lines
% In an equation environment.
\begin{equation}
\sum_{i=0}^{5} f_{i}
\end{equation}
\begin{equation}
\int_{0}^{\infty} \mathrm{e}^{-x} \mathrm{d}x
\end{equation}
\section{Figures}
Let's insert a Figure. Figure placement can get a little tricky.
I definitely have to lookup the placement options each time.
\begin{figure}[H] % H here denoted the placement option.
\centering % centers the figure on the page
% Inserts a figure scaled to 0.8 the width of the page.
%\includegraphics[width=0.8\linewidth]{right-triangle.png}
% Commented out for compilation purposes. Please use your imagination.
\caption{Right triangle with sides $a$, $b$, $c$}
\label{fig:right-triangle}
\end{figure}
\subsection{Table}
We can also insert Tables in the same way as figures.
\begin{table}[H]
\caption{Caption for the Table.}
% the {} arguments below describe how each row of the table is drawn.
% Again, I have to look these up. Each. And. Every. Time.
\begin{tabular}{c|cc}
Number & Last Name & First Name \\ % Column rows are separated by $
\hline % a horizontal line
1 & Biggus & Dickus \\
2 & Monty & Python
\end{tabular}
\end{table}
% \section{Hyperlinks} % Coming soon
\section{Getting LaTeX to not compile something (i.e. Source Code)}
Let's say we want to include some code into our LaTeX document,
we would then need LaTeX to not try and interpret that text and
instead just print it to the document. We do this we a verbatim
environment.
% There are other packages that exist (i.e. minty, lstlisting, etc.)
% but verbatim is the bare-bones basic one.
\begin{verbatim}
print("Hello World!")
a%b; % look! We can use % signs in verbatim.
random = 4; #decided by fair random dice roll
\end{verbatim}
\section{Compiling}
By now you're probably wondering how to compile this fabulous document
and look at the glorious glory that is a LaTeX pdf.
(yes, this document actually does compiles). \\
Getting to the final document using LaTeX consists of the following steps:
\begin{enumerate}
\item Write the document in plain text (the "source code").
\item Compile source code to produce a pdf.
The compilation step looks something like this (in Linux): \\
\begin{verbatim}
$pdflatex learn-latex.tex learn-latex.pdf
\end{verbatim}
\end{enumerate}
A number of LaTeX editors combine both Step 1 and Step 2 in the same piece of
software. So, you get to see Step 1, but not Step 2 completely.
Step 2 is still happening behind the scenes.
You write all your formatting information in plain text in Step 1.
The compilation part in Step 2 takes care of producing the document in the
format you defined in Step 1.
\section{End}
That's all for now!
% end the document
\end{document}- The amazing LaTeX wikibook: https://en.wikibooks.org/wiki/LaTeX
- An actual tutorial: http://www.latex-tutorial.com/