Skip to content

Latest commit

 

History

History
69 lines (63 loc) · 2.59 KB

Hardware.md

File metadata and controls

69 lines (63 loc) · 2.59 KB

Perenio IoT Router Specification

1. Hardware

Name Type Value
SoC must MT7621A@880MHz
DDR3 RAM must 128MB/256MB/512MB
Flash NAND must 128MB/256MB/512MB
WAN must 1 port
LAN must 2 ports
Wi-Fi 2.4 GHz must MT7603EN
Wi-Fi 5 GHz optional MT7612EN/MT7615N
ZigBee optional EFR32MG1P232F256GM48 - @2.4GHz ZigBee Repeater network distance: 100m
Z-Wave optional EFR32ZG14P231F256GM32-BR - Sub-GHz frequency bands (865.2 MHz to 926.3 MHz) network distance: 100m
Bluetooth optional IEEE 802.15.1, BLE 5.0, nRF52840 network distance: 100m
4G optional QUECTEL EC25/EP06
Sim Card Slot optional 1x4FF (NanoSim)
Siren optional 95 dBI
Buttons must Power, WPS, Factory Reset
LEDs optional RGB - WiFI 2.4GHz, WiFi 5GHz,ZigBee, Zwave/WWW, Bluetooth/ BMS, Security/WPS, LTE/Battery
Power must USB C 5V 3A / 9V 2A / 12V 1.5A
Battery backup optional 3. 6V 4000 mAh/8000mAh Li-Pol up to 12 hours

2. Interfaces

Name Type Value
Wi-Fi must 802.11b/g/n, 2 internal antennas 802.11a/n/ac, 2 internal antenna
WAN must 1x10/100/1000Mbit
LAN must 2x10/100/1000Mbit
Zigbee optional IEEE 802.15.4, Repeater, up to 150 connected devices
Z-Wave optional Sub-GHz frequency bands (865.2 MHz to 926.3 MHz)
Bluetooth optional BLE IEEE 802.15.1
LTE optional Bands: B1/B3/B5/B7/B8/B20/B38/B40/B41 - Download speed: 150Mbps/300Mbps - Upload speed: 50Mbps
USB 2.0 must supported USB-modem, File storage, speed up to 480Mb/s
USB 3.0 must supported USB-modem, File storage, speed up to 4,8 Gb/s
SMA optional External LTE antenna
Wi-Fi 2.4 GHz must Internal - Transmitting power: 20dBm - Receiver sensitivity: -85dBm - Antenna gain: 3dBi

3. Antennas

Name Type Value
Wi-Fi 5 GHz must Internal - Transmitting power: 18 dBm - Receiver sensitivity: -91dBm - Antenna gain: 3dBi
ZigBee optional Internal - Transmitting power: 20dBm - Antenna gain: 4dBi
Z-Wave optional Internal - Transmitting power: 18dBm - Antenna gain: 3dBi
LTE optional Internal: 3dBi - External: 4dBi

4. Physical

Name Value
Product size (mm) 142x142x35 mm
GrossWeight (g) around 400g (without package)
NetWeight (g) 350g

5. Power

Name Value
Power Supply Power adapter C/F 100-240VAC, 50/60Hz
Power Consumption 5W
Rated Power 3.5W
Max Power 18W

6. Environment

Name Value
Operate Temperature 0°C ~ 40°C
Operating Humidity 5% - 85% RH non-condensing
Storage Temperature -10°C ~ 60°C
Storage Humidity 5% - 85% RH non-condensing
IP level IP30