diff --git a/tesla_http_proxy/CLOUDFLARE.md b/tesla_http_proxy/CLOUDFLARE.md
new file mode 100644
index 0000000..20667de
--- /dev/null
+++ b/tesla_http_proxy/CLOUDFLARE.md
@@ -0,0 +1,77 @@
+# Tesla HTTP Proxy Cloudflare Tunnel Config
+A short guide for hosting the Tesla HTTP Proxy through a Cloudflare tunnel.
+## Assumptions
+This guide assumes the following:
+* You have a working Cloudflare tunnel on your Home Assistant instance
+* You are using the [Cloudflared add-on](https://github.com/brenner-tobias/addon-cloudflared) for Home Assistant
+* You have configured your developer account on [developer.tesla.com](https://developer.tesla.com) and have your Client ID / Secret Key
+* You **have not installed the Nginx add-on** (uninstall it if you have)
+## Configure Cloudflare Zero Trust
+* In the Zero Trust control panel, select your tunnel and add a new public hostname
+  * The subdomain should match the one used on the Tesla developer page (Example: tsla.someplace.com)
+  * Type: HTTPS
+  * URL: IP:Port used for Nginx (Example: 192.168.1.2:10443)
+* Click the "Additional application settings" link below the hostname config
+  * TLS > Origin Server Name
+    * Enter your domain name _without the subdomain_ (Example: someplace.com)
+  * TLS > No TLS Verify
+    * Enabled (check the box)
+* Click "Save hostname"
+## Configure the Cloudflared Home Assistant add-on
+* Configure the following in the "Additional Hosts" section of the add-on: 
+```
+- hostname: tsla.someplace.com
+  service: https://192.168.1.2:10443
+  originRequest:
+    noTLSVerify: true
+    originServerName: someplace.com
+```
+## Install and configure the Nginx Home Assistant add-on
+* Install the Nginx add-on from the Home Assistant add-on library
+* Set your domain (Example: someplace.com)
+* Select the "Cloudflare" option so Nginx adds Cloudflare's IPs to its config
+* Set your port to the one you configured in the Cloudflare Zero Trust control panel
+* Save and start Nginx
+
+## Install and configure the Tesla HTTP Proxy add-on
+* Install Tesla HTTP Proxy from the Home Assistant add-on library
+* Configure your Client ID, Client Secret, and FQDN (Example: tsla.someplace.com)
+* Save and start the add-on
+
+## Reconfigure the Nginx add-on
+* In the "Customize" section, configure the following:
+```
+active: true
+default: nginx_proxy_default*.conf
+servers: nginx_proxy/*.conf
+```
+* Save and restart the add-on
+
+## Finishing Up
+Watch the Tesla HTTP Proxy logs. If everything was configured correctly, you should see "Starting Tesla HTTP Proxy" at the bottom of your logs. 
+```
+[18:05:36] webui:INFO: Starting Flask server for Web UI...
+[18:05:36] werkzeug:INFO: WARNING: This is a development server. Do not use it in a production deployment. Use a production WSGI server instead.
+ * Running on all addresses (0.0.0.0)
+ * Running on http://127.0.0.1:8099
+ * Running on http://172.30.33.12:8099
+[18:05:36] werkzeug:INFO: Press CTRL+C to quit
+[18:05:37] INFO: Found existing keypair
+[18:05:37] INFO: Testing public key...
+HTTP/2 200 
+.
+.
+.
+-----BEGIN PUBLIC KEY-----
+.
+.
+-----END PUBLIC KEY-----
+[18:05:37] INFO: Running auth.py
+[18:05:38] auth:INFO: Generating Partner Authentication Token
+[18:05:38] auth:INFO: Registering Tesla account...
+[18:05:39] INFO: Starting Tesla HTTP Proxy
+```
+Proceed with the rest of the setup / configuration as per the standard configuration instructions.
+
+## Debugging
+If things don't seem to be working as expected, be sure to check the Cloudflared, Nginx, and Tesla HTTP Proxy logs for clues. 
\ No newline at end of file