+
+
+
+
+
+
+
+
+
+
+
+
+Frequently Asked Questions (FAQ)
+What is the Hedgehog Fabric?
+The Hedgehog Fabric is a topology of routers arranged in a spine-leaf architecture. A spine-leaf architecture is a type of Clos network topology. In a spine-leaf architecture, the leaves are usually placed in racks and connected directly to the servers, whereas spines are connected only to leaves. In a spine-leaf architecture, the fundamental unit of connection is a layer 3 route.
+The Hedgehog Fabric is managed via Kubernetes objects and custom resource definitions.
+What are the advantages of a spine-leaf architecture?
+A spine-leaf architecture is designed to facilitate traffic that is passing between servers inside of a data center. By contrast, other architectures like core-access-aggregation facilitate traffic moving in and out of the data center. A spine-leaf architecture provides multiple paths between nodes which allows for router maintenance and resilience in the case of failures. The spine-leaf architecture allows for multiple points of egress via border leaf nodes. In a spine-leaf architecture the unit of connection is a layer 3 route. There are robust tools, queueing algorithms and hardware available to manage network traffic at layer 3. To manage the distribution of routes to switches inside the fabric a protocol such as BGP, OSPF, or IS-IS is used.
+Spine Leaf Architecture Diagram
+The following diagram contains Leaf and Spine routers. Servers inside of a virtual private cloud can be attached to any leaf. To allow the servers to communicate, routes are applied to leaf nodes. The traffic passing from leaf 1 to leaf 2 can travel via any spine: the leaf uses ECMP to decide which spine to use. EVPN ensures that servers inside of a VPC are reachable at layer 2 regardless of which leaf they are attached to in the Fabric.
+graph TD
+ S1([Spine 1])
+ S2([Spine 2])
+ S3([Spine 3])
+ L1([Leaf 1])
+ L2([Leaf 2])
+ L3([Leaf 3])
+ L4([Leaf 4])
+ WS1[[Worload Servers]]
+ WS2[[Worload Servers]]
+ WS3[[Worload Servers]]
+ WS4[[Worload Servers]]
+
+ S1 & S2 & S3 ---- L1 & L2 & L3 & L4
+ L1 ---- WS1
+ L2 ---- WS2
+ L3 ---- WS3
+ L4 ---- WS4
+
+Core Access Aggregation Diagram
+In the diagram below, the Access switches are isolated or managed by layer-2 constructs like ACLs, bridging, and VLANs. The Aggregation routers are where layer-2 traffic is promoted to layer 3. The core routers handle layer-3 traffic only. Often some form of Spanning Tree Protocol is used to avoid loops in the layer-2 domain. Loops would cripple the network as layer 2 often relies on Broadcast/Flooding for discovery. While there are multiple paths out from the workload servers to the core they are often not passing traffic due to the Spanning Tree Protocol, these disable links are shown as dotted lines.
+graph TD
+ CG1((Core Router 1))
+ CG2((Core Router 2))
+ AG1([Aggregation 1])
+ AG2([Aggregation 2])
+ AG3([Aggregation 3])
+ A1[Access 1]
+ A2[Access 2]
+ A3[Access 3]
+ WS1[[Worload Servers]]
+ WS2[[Worload Servers]]
+ WS3[[Worload Servers]]
+
+ CG1 ---- AG1 & AG2 & AG3
+ CG2 ---- AG1 & AG2 & AG3
+ AG1 ---- A1
+ AG2 ---- A2
+ AG3 ---- A3
+ AG1 -..- A2 & A3
+ AG2 -..- A1 & A3
+ AG3 -..- A1 & A2
+ A1 ---- WS1
+ A2 ---- WS2
+ A3 ---- WS3
+
+What does it mean to manage my network with Kubernetes?
+A common way to manage a network is to proceed manually via the command-line interface of the equipment, or with the hardware vendor tools. Managing a small number of switches and routers this way is workable, but cumbersome, and it only gets more painful when the network grows. Managing switches and servers with Kubernetes is similar to managing pods and applications with Kubernetes: it provides assistance for deployment, scaling, and management of the network appliances.
+For example, if the administrator of a Kubernetes cluster wants to create a new Nginx pod, they write down the YAML file describing the pod name, the container image, any ports that the pod needs exposed, and what namespace to run the pod in. After the YAML file is created, a simple kubectl apply -f nginx.yaml is all that the administrator needs to run in order for the pod to be scheduled.
+With the Hedgehog Fabric, the same principles apply to managing network resources. Administrators create a YAML file to configure a VPC. The YAML file describes the IP address range for the private cloud, for example the 192.168.0.0/16 space. It also describes any VLANs that the private cloud needs. After the desired options are in the file, administrators can push the configuration to the switch with a mere kubectl apply -f vpc1.yaml, and within a few seconds the switch configuration is live.
+What is a Virtual Private Cloud (VPC)?
+A VPC provides layer 3 logical isolation inside of a network. To isolate the servers, a VRF is used. A VRF allows for multiple routing tables to exist at the same time on a switch. Each VPC is isolated from the others because there is simply no route between them.
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+
+