🌟 Cloudflare DDNS

A feature-rich and robust Cloudflare DDNS updater with a small footprint. The program will detect your machine’s public IP addresses and update DNS records using the Cloudflare API.

📜 Highlights

⚡ Efficiency

🤏 The Docker image takes less than 5 MB after compression.
🔁 The Go runtime re-uses existing HTTP connections.
🗃️ Cloudflare API responses are cached to reduce the API usage.

💯 Complete Support of Domain Names

😌 You can simply list domains (e.g., www.a.org, hello.io) without knowing their DNS zones.
🌍 Internationalized domain names (e.g., 🐱.example.org and 日本｡co｡jp) are fully supported.
🃏 Wildcard domains (e.g., *.example.org) are also supported.
🕹️ You can toggle IPv4 (A records) and IPv6 (AAAA records) for each domain.

🌥️ Cloudflare-specific Features

😶‍🌫️ You can toggle Cloudflare proxying for each domain.
📝 You can set comments for new DNS records.
📜 The updater can maintain lists of detected IP addresses. These lists can then be referenced in any Cloudflare product that uses Cloudflare’s Rules language, such as Cloudflare Web Application Firewall (WAF) and Cloudflare Rules. (We call the lists “WAF lists”, but their use is not limited to Cloudflare WAF.)

👁️ Integration with Notification Services

🩺 The updater can report to Healthchecks or Uptime Kuma so that you receive notifications when it fails to update IP addresses.
📣 The updater can also actively update you via any service supported by the shoutrrr library, including emails, major notification services, major messaging platforms, and generic webhooks.

🕵️ Minimum Privacy Impact

By default, public IP addresses are obtained via Cloudflare’s debugging page. This minimizes the impact on privacy because we are already using the Cloudflare API to update DNS records. Moreover, if Cloudflare servers are not reachable, chances are you cannot update DNS records anyways.

🛡️ Attention to Security

🛡️ The updater uses only HTTPS or DNS over HTTPS to detect IP addresses. This makes it harder for someone else to trick the updater into updating your DNS records with wrong IP addresses. See the Security Model for more information.
Click to expand: ✍️ You can verify the Docker images were built from this repository using the cosign tool.
```
cosign verify favonia/cloudflare-ddns:latest \
  --certificate-identity-regexp https://github.com/favonia/cloudflare-ddns/ \
  --certificate-oidc-issuer https://token.actions.githubusercontent.com
```
Note: this only proves that the Docker image is from this repository, assuming that no one hacks into GitHub or the repository. It does not prove that the code itself is secure.
Click to expand: 📚 The updater uses only established open-source Go libraries.
- cloudflare-go:
  The official Go binding of Cloudflare API v4.
- cron:
  Parsing of Cron expressions.
- go-retryablehttp:
  HTTP clients with automatic retries and exponential backoff.
- go-querystring:
  A library to construct URL query parameters.
- shoutrrr:
  A notification library for sending general updates.
- ttlcache:
  In-memory cache to hold Cloudflare API responses.
- mock (for testing only):
  A comprehensive, semi-official framework for mocking.
- testify (for testing only):
  A comprehensive tool set for testing Go programs.

⛷️ Quick Start

Click to expand: 🐋 Directly run the Docker image

docker run \
  --network host \
  -e CLOUDFLARE_API_TOKEN=YOUR-CLOUDFLARE-API-TOKEN \
  -e DOMAINS=example.org,www.example.org,example.io \
  -e PROXIED=true \
  favonia/cloudflare-ddns:latest

Click to expand: 🧬 Directly run the updater from its source

You need the Go tool to run the updater from its source.

CLOUDFLARE_API_TOKEN=YOUR-CLOUDFLARE-API-TOKEN \
  DOMAINS=example.org,www.example.org,example.io \
  PROXIED=true \
  go run github.com/favonia/cloudflare-ddns/cmd/ddns@latest

🏁 Deployment as a System Service

See community-contributed sample configurations for OpenBSD.

🐋 Deployment with Docker Compose

📦 Step 1: Updating the Compose File

Incorporate the following fragment into the compose file (typically docker-compose.yml or docker-compose.yaml). The template may look a bit scary, but only because it includes various optional flags for extra security protection.

services:
  cloudflare-ddns:
    image: favonia/cloudflare-ddns:latest
    # Choose the appropriate tag based on your need:
    # - "latest" for the latest stable version (which could become 2.x.y
    #   in the future and break things)
    # - "1" for the latest stable version whose major version is 1
    # - "1.x.y" to pin the specific version 1.x.y
    network_mode: host
    # This bypasses network isolation and makes IPv6 easier (optional; see below)
    restart: always
    # Restart the updater after reboot
    user: "1000:1000"
    # Run the updater with specific user and group IDs (in that order).
    # You can change the two numbers based on your need.
    read_only: true
    # Make the container filesystem read-only (optional but recommended)
    cap_drop: [all]
    # Drop all Linux capabilities (optional but recommended)
    security_opt: [no-new-privileges:true]
    # Another protection to restrict superuser privileges (optional but recommended)
    environment:
      - CLOUDFLARE_API_TOKEN=YOUR-CLOUDFLARE-API-TOKEN
        # Your Cloudflare API token
      - DOMAINS=example.org,www.example.org,example.io
        # Your domains (separated by commas)
      - PROXIED=true
        # Tell Cloudflare to cache webpages and hide your IP (optional)

Click to expand: 🔑 CLOUDFLARE_API_TOKEN is your Cloudflare API token

The value of CLOUDFLARE_API_TOKEN should be an API token (not an API key), which can be obtained from the API Tokens page. Use the Edit zone DNS template to create a token. The less secure API key authentication is deliberately not supported.

There is an optional feature (available since version 1.14.0) that lets you maintain a WAF list of detected IP addresses. To use this feature, edit the token and grant it the Account - Account Filter Lists - Edit permission. If you only need to update WAF lists, not DNS records, you can remove the Zone - DNS - Edit permission. Refer to the detailed documentation below for information on updating WAF lists.

Click to expand: 📍 DOMAINS is the list of domains to update

The value of DOMAINS should be a list of fully qualified domain names (FQDNs) separated by commas. For example, DOMAINS=example.org,www.example.org,example.io instructs the updater to manage the domains example.org, www.example.org, and example.io. These domains do not have to share the same DNS zone---the updater will take care of the DNS zones behind the scene.

Click to expand: 🚨 Remove PROXIED=true if you are not running a web server

The setting PROXIED=true instructs Cloudflare to cache webpages and hide your IP addresses. If you wish to bypass that and expose your actual IP addresses, remove PROXIED=true. If your traffic is not HTTP(S), then Cloudflare cannot proxy it and you should probably turn off the proxying by removing PROXIED=true. The default value of PROXIED is false.

Click to expand: 📴 Add IP6_PROVIDER=none if you want to disable IPv6 completely

The updater, by default, will attempt to update DNS records for both IPv4 and IPv6, and there is no harm in leaving the automatic detection on even if your network does not work for one of them. However, if you want to disable IPv6 entirely (perhaps to avoid seeing the detection errors), add IP6_PROVIDER=none.

Click to expand: 📡 Use IPv6 without bypassing network isolation (without network_mode: host)

The easiest way to enable IPv6 is to use network_mode: host so that the updater can access the host IPv6 network directly. This has the downside of bypassing the network isolation. If you wish to keep the updater isolated from the host network, remove network_mode: host and follow the steps in the official Docker documentation to enable IPv6. Do use newer versions of Docker that come with much better IPv6 support!

Click to expand: 🛡️ Change user: "1000:1000" to the user and group IDs you want to use

Change 1000:1000 to USER:GROUP for the USER and GROUP IDs you wish to use to run the updater. The settings cap_drop, read_only, and no-new-privileges in the template provide additional protection, especially when you run the container as a non-superuser.

🚀 Step 2: Building and Running the Container

docker-compose pull cloudflare-ddns
docker-compose up --detach --build cloudflare-ddns

❓ Frequently Asked Questions

Click to expand: ❔ I simulated an IP address change by editing the DNS records, but the updater never picked it up!

Please rest assured that the updater is working as expected. It will update the DNS records immediately for a real IP change. Here is a detailed explanation. There are two causes of an IP mismatch:

A change of your actual IP address (a real change), or
A change of the IP address in the DNS records (a simulated change).

The updater assumes no one will actively change the DNS records. In other words, it assumes simulated changes will not happen. It thus caches the DNS records and cannot detect your simulated changes. However, when your actual IP address changes, the updater will immediately update the DNS records. Also, the updater will eventually check the DNS records and detect simulated changes after CACHE_EXPIRATION (six hours by default) has passed.

If you really wish to test the updater with simulated IP changes in the DNS records, you can set CACHE_EXPIRATION=1ns (all cache expiring in one nanosecond), effectively disabling the caching. However, it is recommended to keep the default value (six hours) to reduce your network traffic.

Click to expand: ❔ How can I see the timestamps of the IP checks and/or updates?

The updater does not itself add timestamps because all major systems already timestamp everything:

If you are using Docker Compose, Kubernetes, or Docker directly, add the option --timestamps when viewing the logs.
If you are using Portainer, enable “Show timestamp” when viewing the logs.

Click to expand: ❔ Why did the updater detect a public IP address different from the WAN IP address on my router?

Is your “public” IP address on your router between 100.64.0.0 and 100.127.255.255? If so, you are within your ISP’s CGNAT (Carrier-grade NAT). In practice, there is no way for DDNS to work with CGNAT, because your ISP does not give you a real public IP address, nor does it allow you to forward IP packages to your router using cool protocols such as Port Control Protocol. You have to give up DDNS or switch to another ISP. You may consider other services such as Cloudflare Tunnel that can work around CGNAT.

Click to expand: ❔ How should I install this updater in ☸️ Kubernetes?

While the instructions for Kubernetes were removed due to high maintenance, you can still generate Kubernetes configurations from the provided Docker Compose template using a conversion tool like Kompose. Please note that only recent versions of Kompose support the user: "UID:GID" attribute with GID. (For more information, see my pull request that adds this feature to Kompose.)

Note that a simple Kubernetes Deployment will suffice here. Since there’s no inbound network traffic, a Kubernetes Service isn’t required.

Click to expand: ❔ Help! I got exec /bin/ddns: operation not permitted

Certain Docker installations may have issues with the no-new-privileges security option. If you cannot run Docker images with this option (including this updater), removing it might be necessary. This will slightly compromise security, but it’s better than not running the updater at all. If only this updater is affected, please report this issue on GitHub.

🎛️ Further Customization

⚙️ All Settings

The emoji “🧪” indicates experimental features and the emoji “🤖” indicates technical details.

Click to expand: 🔑 The Cloudflare API token

Starting with version 1.15.0, the updater supports environment variables that begin with CLOUDFLARE_*. Multiple environment variables can be used at the same time, provided they all specify the same token.

Name	Meaning
`CLOUDFLARE_API_TOKEN`	The Cloudflare API token to access the Cloudflare API
`CLOUDFLARE_API_TOKEN_FILE`	A path to a file that contains the Cloudflare API token to access the Cloudflare API
`CF_API_TOKEN` (will be deprecated in version 2.0.0)	Same as `CLOUDFLARE_API_TOKEN`
`CF_API_TOKEN_FILE` (will be deprecated version in 2.0.0)	Same as `CLOUDFLARE_API_TOKEN_FILE`

🚂 Cloudflare is updating its tools to use environment variables starting with CLOUDFLARE_* instead of CF_*. It is recommended to align your setting to align with this new convention. However, the updater will fully support both CLOUDFLARE_* and CF_* environment variables until version 2.0.0.

🔑 To update DNS records, the updater needs the Zone - DNS - Edit permission.

🔑 To manipulate WAF lists, the updater needs the Account - Account Filter Lists - Edit permission.

Click to expand: 📍 DNS domains and WAF lists to update

You need to specify at least one thing in DOMAINS, IP4_DOMAINS, IP6_DOMAINS, or 🧪 WAF_LISTS (since version 1.14.0) for the updater to update.

Name	Meaning
`DOMAINS`	Comma-separated fully qualified domain names or wildcard domain names that the updater should manage for both `A` and `AAAA` records. Listing a domain in `DOMAINS` is equivalent to listing the same domain in both `IP4_DOMAINS` and `IP6_DOMAINS`.
`IP4_DOMAINS`	Comma-separated fully qualified domain names or wildcard domain names that the updater should manage for `A` records
`IP6_DOMAINS`	Comma-separated fully qualified domain names or wildcard domain names that the updater should manage for `AAAA` records
🧪 `WAF_LISTS` (since version 1.14.0)	🧪 Comma-separated references of WAF lists the updater should manage. A list reference is written in the format `<account-id>/<list-name>` where `account-id` is your account ID and `list-name` is the list name; it should look like `0123456789abcdef0123456789abcdef/mylist`. If the referenced WAF list does not exist, the updater will try to create it. 🔑 The API token needs the Account - Account Filter Lists - Edit permission. 💡 See how to find your account ID.

🃏🤖 Wildcard domains (*.example.org) represent all subdomains that would not exist otherwise. Therefore, if you have another subdomain entry sub.example.org, the wildcard domain is independent of it, because it only represents the other subdomains which do not have their own entries. Also, you can only have one layer of *---*.*.example.org would not work.

🌐🤖 Internationalized domain names are handled using the nontransitional processing (fully compatible with IDNA2008). At this point, all major browsers and whatnot have switched to the same nontransitional processing. See this useful FAQ on internationalized domain names.

🤖 Technical notes on WAF lists:

Cloudflare does not allow single IPv6 addresses in a WAF list, and thus the updater will use the smallest IP range allowed by Cloudflare that contains the detected IPv6 address.

The updater will delete IP addresses belonging to unmanaged IP families from the specified WAF lists (e.g., if you disable IPv6 with IP6_PROVIDER=none, then existing IPv6 addresses or IPv6 ranges in the lists will be deleted). The idea is that the list should contain only detected IP addresses.

Click to expand: 🔍 IP address providers

Name	Meaning	Default Value
`IP4_PROVIDER`	This specifies how to detect the current IPv4 address. Available providers include `cloudflare.doh`, `cloudflare.trace`, `local`, `local.iface:<iface>`, `url:<URL>`, and `none`. The special `none` provider disables IPv4 completely. See below for a detailed explanation.	`cloudflare.trace`
`IP6_PROVIDER`	This specifies how to detect the current IPv6 address. Available providers include `cloudflare.doh`, `cloudflare.trace`, `local`, `local.iface:<iface>`, `url:<URL>`, and `none`. The special `none` provider disables IPv6 completely. See below for a detailed explanation.	`cloudflare.trace`

👉 The option IP4_PROVIDER governs A-type DNS records and IPv4 addresses in WAF lists, while the option IP6_PROVIDER governs AAAA-type DNS records and IPv6 addresses in WAF lists. The two options act independently of each other. You can specify different address providers for IPv4 and IPv6.

Provider Name	Explanation
`cloudflare.doh`	Get the IP address by querying `whoami.cloudflare.` against Cloudflare via DNS-over-HTTPS. 🤖 The updater will connect `1.1.1.1` for IPv4 and `2606:4700:4700::1111` for IPv6. Since version 1.9.3, the updater will switch to `1.0.0.1` for IPv4 if `1.1.1.1` appears to be blocked or intercepted by your ISP or your router (which is still not uncommon). Since version 1.14.0, the blockage detection uses a variant of the Happy Eyeballs algorithm to reduce delay.
`cloudflare.trace`	Get the IP address by parsing the Cloudflare debugging page. This is the default provider. 🤖 The updater will connect `1.1.1.1` for IPv4 and `2606:4700:4700::1111` for IPv6. Since version 1.9.3, the updater will switch to `1.0.0.1` for IPv4 if `1.1.1.1` appears to be blocked or intercepted by your ISP or your router (which is still not uncommon). Since version 1.14.0, the blockage detection uses a variant of the Happy Eyeballs algorithm to reduce delay.
`local`	Get the IP address via local network interfaces and routing tables. The updater will use the local address that would have been used for outbound UDP connections to Cloudflare servers. (No data will be transmitted.) ⚠️ The updater needs access to the host network (such as `network_mode: host` in Docker Compose) for this provider, for otherwise the updater will detect the addresses inside the default bridge network in Docker instead of those in the host network.
🧪 `local.iface:<iface>` (available since version 1.15.0 but not finalized until 1.16.0)	🧪 Get the IP address via the specific local network interface `iface`. The updater will choose the first global unicast IP address of the matching IP family (IPv4 or IPv6). ⚠️ The updater needs access to the host network (such as `network_mode: host` in Docker Compose) for this provider, for otherwise the updater cannot access host network interfaces.
`url:<URL>`	Fetch the IP address from a URL. The provider format is `url:` followed by the URL itself. For example, `IP4_PROVIDER=url:https://api4.ipify.org` will fetch the IPv4 address from https://api4.ipify.org. Since version 1.15.0, the updater will enforce the matching protocol (IPv4 or IPv6) when connecting to the provided URL. Currently, only HTTP(S) is supported.
`none`	Stop the DNS updating for the specified IP version completely. For example `IP4_PROVIDER=none` will disable IPv4 completely. Existing DNS records will not be removed. 🧪 The IP addresses of the disabled IP version will be removed from WAF lists; so `IP4_PROVIDER=none` will remove all IPv4 addresses from all managed WAF lists. As the support of WAF lists is still experimental, this behavior is subject to changes and please provide feedback.

Click to expand: 📅 Scheduling of IP detections and updates

Name	Meaning	Default Value
`CACHE_EXPIRATION`	The expiration of cached Cloudflare API responses. It can be any positive time duration accepted by time.ParseDuration, such as `1h` or `10m`.	`6h0m0s` (6 hours)
`DELETE_ON_STOP`	Whether managed DNS records and WAF lists should be deleted on exit. It can be any boolean value accepted by strconv.ParseBool, such as `true`, `false`, `0` or `1`. If a WAF list is used in a rule expression, the list cannot be deleted (for otherwise the rule expression would be broken), but the updater will try to remove all IP addresses from the list.	`false`
`TZ`	The timezone used for logging messages and parsing `UPDATE_CRON`. It can be any timezone accepted by time.LoadLocation, including any IANA Time Zone. 🤖 The pre-built Docker images come with the embedded timezone database via the time/tzdata package.	`UTC`
`UPDATE_CRON`	The schedule to re-check IP addresses and update DNS records and WAF lists (if needed). The format is any cron expression accepted by the `cron` library or the special value `@once`. The special value `@once` means the updater will terminate immediately after updating the DNS records or WAF lists, effectively disabling the scheduling feature. 🤖 The update schedule does not take the time to update records into consideration. For example, if the schedule is `@every 5m`, and if the updating itself takes 2 minutes, then the actual interval between adjacent updates is 3 minutes, not 5 minutes.	`@every 5m` (every 5 minutes)
`UPDATE_ON_START`	Whether to check IP addresses (and possibly update DNS records and WAF lists) immediately on start, regardless of the update schedule specified by `UPDATE_CRON`. It can be any boolean value accepted by strconv.ParseBool, such as `true`, `false`, `0` or `1`.	`true`

Click to expand: ⏳ Timeouts of various operations

Name	Meaning	Default Value
`DETECTION_TIMEOUT`	The timeout of each attempt to detect IP address, per IP version (IPv4 and IPv6). It can be any positive time duration accepted by time.ParseDuration, such as `1h` or `10m`.	`5s` (5 seconds)
`UPDATE_TIMEOUT`	The timeout of each attempt to update DNS records, per domain and per record type, or per WAF list. It can be any positive time duration accepted by time.ParseDuration, such as `1h` or `10m`.	`30s` (30 seconds)

Click to expand: 🐣 Parameters of new DNS records and WAF lists (proxy status, TTL, and comments)

👉 The updater will preserve existing parameters (TTL, proxy states, DNS record comments, etc.). Only when it creates new DNS records and new WAF lists, the following settings will apply. To change existing parameters, you can go to your Cloudflare Dashboard and change them directly. If you think you have a use case where the updater should actively overwrite existing parameters in addition to IP addresses, please let me know. 🐞🧪 KNOWN ISSUE: comments of stale WAF list items (not WAF lists themselves) will not be kept because the Cloudflare API does not provide an easy way to update list items. The comments will be lost when the updater deletes stale list items and create new ones.

Name	Meaning	Default Value
`PROXIED`	Whether new DNS records should be proxied by Cloudflare. It can be any boolean value accepted by strconv.ParseBool, such as `true`, `false`, `0` or `1`. 🤖 Advanced usage: it can also be a domain-dependent boolean expression as described below.	`false`
`TTL`	The time-to-live (TTL) (in seconds) of new DNS records.	`1` (This means “automatic” to Cloudflare)
`RECORD_COMMENT`	The record comment of new DNS records.	`""`
🧪 `WAF_LIST_DESCRIPTION` (since version 1.14.0)	🧪 The text description of new WAF lists.	`""`

🤖 For advanced users: the PROXIED can be a boolean expression involving domains! This allows you to enable Cloudflare proxying for some domains but not the others. Here are some example expressions:

PROXIED=is(example.org): proxy only the domain example.org

PROXIED=is(example1.org) || sub(example2.org): proxy only the domain example1.org and subdomains of example2.org

PROXIED=!is(example.org): proxy every managed domain except for example.org

PROXIED=is(example1.org) || is(example2.org) || is(example3.org): proxy only the domains example1.org, example2.org, and example3.org

A boolean expression must be one of the following forms (all whitespace is ignored):

Syntax Meaning

Any string accepted by strconv.ParseBool, such as true, false, 0, or 1 Logical truth or falsehood

is(d) Matching the domain d. Note that is(*.a) only matches the wildcard domain *.a; use sub(a) to match all subdomains of a (including *.a).

sub(d) Matching subdomains of d, such as a.d, b.c.d, and *.d. It does not match the domain d itself.

! e Logical negation of the boolean expression e

e1 || e2 Logical disjunction of the boolean expressions e1 and e2

e1 && e2 Logical conjunction of the boolean expressions e1 and e2

One can use parentheses to group expressions, such as !(is(a) && (is(b) || is(c))). For convenience, the parser also accepts these short forms:

Short Form Equivalent Full Form

is(d1, d2, ..., dn) is(d1) || is(d2) || ... || is(dn)

sub(d1, d2, ..., dn) sub(d1) || sub(d2) || ... || sub(dn)

For example, these two settings are equivalent:

PROXIED=is(example1.org) || is(example2.org) || is(example3.org)

PROXIED=is(example1.org,example2.org,example3.org)

Click to expand: 👁️ Message logging options

Name	Meaning	Default Value
`EMOJI`	Whether the updater should use emojis in the logging. It can be any boolean value accepted by strconv.ParseBool, such as `true`, `false`, `0` or `1`.	`true`
`QUIET`	Whether the updater should reduce the logging. It can be any boolean value accepted by strconv.ParseBool, such as `true`, `false`, `0` or `1`.	`false`

Click to expand: 📣 Notification services (Healthchecks, Uptime Kuma, and shoutrrr)

💡 If your network doesn’t support IPv6, set IP6_PROVIDER=none to disable IPv6. This will prevent the updater from reporting failures in detecting IPv6 addresses to monitoring services. Similarly, set IP4_PROVIDER=none if your network doesn’t support IPv4.

Name Meaning

HEALTHCHECKS

The Healthchecks ping URL to ping when the updater successfully updates IP addresses, such as https://hc-ping.com/<uuid> or https://hc-ping.com/<project-ping-key>/<name-slug>

⚠️ The ping schedule should match the update schedule specified by UPDATE_CRON.
🤖 The updater can work with any server following the same Healthchecks protocol, including self-hosted instances of Healthchecks. Both UUID and Slug URLs are supported, and the updater works regardless whether the POST-only mode is enabled.

UPTIMEKUMA

The Uptime Kuma’s Push URL to ping when the updater successfully updates IP addresses, such as https://<host>/push/<id>. You can directly copy the “Push URL” from the Uptime Kuma configuration page.

⚠️ The “Heartbeat Interval” should match the update schedule specified by UPDATE_CRON.

🧪 SHOUTRRR (since version 1.12.0) Newline-separated shoutrrr URLs to which the updater sends notifications of IP address changes and other events. Each shoutrrr URL represents a notification service; for example, discord://<token>@<id> means sending messages to Discord.

🔂 Restarting the Container

If you are using Docker Compose, run docker-compose up --detach to reload settings.

🚵 Migration Guides

Click to expand: I am migrating from oznu/cloudflare-ddns (now archived)

⚠️ oznu/cloudflare-ddns relies on the insecure DNS protocol to obtain public IP addresses; a malicious hacker could more easily forge DNS responses and trick it into updating your domain with any IP address. In comparison, we use only verified responses from Cloudflare, which makes the attack much more difficult. See the design document for more information on security.

Old Parameter		Note
`API_KEY=key`	✔️	Use `CLOUDFLARE_API_TOKEN=key`
`API_KEY_FILE=file`	✔️	Use `CLOUDFLARE_API_TOKEN_FILE=file`
`ZONE=example.org` and `SUBDOMAIN=sub`	✔️	Use `DOMAINS=sub.example.org` directly
`PROXIED=true`	✔️	Same (`PROXIED=true`)
`RRTYPE=A`	✔️	Both IPv4 and IPv6 are enabled by default; use `IP6_PROVIDER=none` to disable IPv6
`RRTYPE=AAAA`	✔️	Both IPv4 and IPv6 are enabled by default; use `IP4_PROVIDER=none` to disable IPv4
`DELETE_ON_STOP=true`	✔️	Same (`DELETE_ON_STOP=true`)
`INTERFACE=name`	✔️	To automatically select the local address, use `IP4/6_PROVIDER=local`. 🧪 To select the first address of a specific network interface, use `IP4/6_PROVIDER=local.iface:name` (available since version 1.15.0 but not finalized until 1.16.0).
`CUSTOM_LOOKUP_CMD=cmd`	❌	Custom commands are not supported because there are no other programs in the minimal Docker image
`DNS_SERVER=server`	❌	The updater only supports secure DNS queries using Cloudflare’s DNS over HTTPS (DoH) server. To enable this, set `IP4/6_PROVIDER=cloudflare.doh`.

Click to expand: I am migrating from timothymiller/cloudflare-ddns

Old JSON Key		Note
`cloudflare.authentication.api_token`	✔️	Use `CLOUDFLARE_API_TOKEN=key`
`cloudflare.authentication.api_key`	❌	Please use the newer, more secure API tokens
`cloudflare.zone_id`	✔️	Not needed; automatically retrieved from the server
`cloudflare.subdomains[].name`	✔️	Use `DOMAINS` with fully qualified domain names (FQDNs) directly; for example, if your zone is `example.org` and your subdomain is `sub`, use `DOMAINS=sub.example.org`
`cloudflare.subdomains[].proxied`	✔️	Write boolean expressions for `PROXIED` to specify per-domain settings; see above for the detailed documentation for this advanced feature
`load_balancer`	❌	Not supported yet; please make a request if you want it
`a`	✔️	Both IPv4 and IPv6 are enabled by default; use `IP4_PROVIDER=none` to disable IPv4
`aaaa`	✔️	Both IPv4 and IPv6 are enabled by default; use `IP6_PROVIDER=none` to disable IPv6
`proxied`	✔️	Use `PROXIED=true` or `PROXIED=false`
`purgeUnknownRecords`	❌	The updater never deletes unmanaged DNS records

📜 Some historical notes: This updater was originally written as a Go clone of the Python program timothymiller/cloudflare-ddns because the Python program always purged unmanaged DNS records back then and it was not configurable via environment variables. There were feature requests to address these issues but the author timothymiller seemed to ignore them; I thus made my Go clone after unsuccessful communications. Understandably, timothymiller did not seem happy with my cloning and my other critical comments towards other aspects of the Python updater. Eventually, an option purgeUnknownRecords was added to the Python program to disable the unwanted purging, and it became configurable via environment variables, but my Go clone already went on its way. I believe my Go clone is now a much better choice, but my opinions are biased and you should check the technical details by yourself. 😉

💖 Feedback

Questions, suggestions, feature requests, and contributions are all welcome! Feel free to open a GitHub issue.

📜 License

The code is licensed under Apache 2.0 with LLVM exceptions. (The LLVM exceptions provide better compatibility with GPL 2.0 and other license exceptions.)

Provide feedback

Saved searches

Use saved searches to filter your results more quickly

README.markdown

README.markdown

🌟 Cloudflare DDNS

📜 Highlights

⚡ Efficiency

💯 Complete Support of Domain Names

🌥️ Cloudflare-specific Features

👁️ Integration with Notification Services

🕵️ Minimum Privacy Impact

🛡️ Attention to Security

⛷️ Quick Start

🏁 Deployment as a System Service

🐋 Deployment with Docker Compose

📦 Step 1: Updating the Compose File

🚀 Step 2: Building and Running the Container

❓ Frequently Asked Questions

🎛️ Further Customization

⚙️ All Settings

🔂 Restarting the Container

🚵 Migration Guides

💖 Feedback

📜 License

Syntax	Meaning
Any string accepted by strconv.ParseBool, such as `true`, `false`, `0`, or `1`	Logical truth or falsehood
`is(d)`	Matching the domain `d`. Note that `is(.a)` only matches the wildcard domain `.a`; use `sub(a)` to match all subdomains of `a` (including `*.a`).
`sub(d)`	Matching subdomains of `d`, such as `a.d`, `b.c.d`, and `*.d`. It does not match the domain `d` itself.
`! e`	Logical negation of the boolean expression `e`
`e1 \|\| e2`	Logical disjunction of the boolean expressions `e1` and `e2`
`e1 && e2`	Logical conjunction of the boolean expressions `e1` and `e2`

Short Form	Equivalent Full Form
`is(d1, d2, ..., dn)`	`is(d1) \|\| is(d2) \|\| ... \|\| is(dn)`
`sub(d1, d2, ..., dn)`	`sub(d1) \|\| sub(d2) \|\| ... \|\| sub(dn)`

Files

README.markdown

Latest commit

History

README.markdown

File metadata and controls

🌟 Cloudflare DDNS

📜 Highlights

⚡ Efficiency

💯 Complete Support of Domain Names

🌥️ Cloudflare-specific Features

👁️ Integration with Notification Services

🕵️ Minimum Privacy Impact

🛡️ Attention to Security

⛷️ Quick Start

🏁 Deployment as a System Service

🐋 Deployment with Docker Compose

📦 Step 1: Updating the Compose File

🚀 Step 2: Building and Running the Container

❓ Frequently Asked Questions

🎛️ Further Customization

⚙️ All Settings

🔂 Restarting the Container

🚵 Migration Guides

💖 Feedback

📜 License