From 5b4da4a8bb424bb7ff3c2c54a1e0e50d86bf59ed Mon Sep 17 00:00:00 2001 From: agustin Date: Fri, 21 Jun 2024 15:00:05 -0700 Subject: [PATCH 1/2] hardware --- website/docs/farm-tools/three-point.md | 27 +++++++++++++++++--------- 1 file changed, 18 insertions(+), 9 deletions(-) diff --git a/website/docs/farm-tools/three-point.md b/website/docs/farm-tools/three-point.md index 15de92f40..aa3b19a41 100644 --- a/website/docs/farm-tools/three-point.md +++ b/website/docs/farm-tools/three-point.md @@ -12,15 +12,24 @@ If you are missing any necessary pieces, please contact [farm-ng](https://amiga. immediately. ::: -## Included Hardware - -1. **24** Carriage bolts 3/8" by 1 1/4" -2. **24** Flat Washers 3/8" -3. **24** Nylon Insert Locknut 3/8" -4. **4** Hex Cap Screw 5/8" x 3" -5. **12** Flat Washers 5/8" -6. **2** Hex Cap Screw 5/8 x 2 1/4" -7. **6** Hex Nut 5/8" +## Required Hardware + +1. **4** 5/8-11 Nylon lock nut +2. **2** 1/2-13 Nylon nut +3. **2** 3/4-10 Nylon lock nut +4. **32** 3/8 Nylon lock nut +5. **32** 3/8 Washer +6. **4** 1/2 Washer +7. **8** 5/8 Washer +8. **4** 3/8 Eye bolts +9. **2** Eye bolt spacers +10. **28** 3/8-16x1.25 carriage bolts +11. **4** Bridge Bushings +12. **4** Turn buckle ends +13. **4** 5/8-11 bolt +14. **4** 1/2-13 bolt +15. **4** 3/4-10 bolt + ## Tools needed From 60a03a90ec00970f808f57d9bd050a08a289aecd Mon Sep 17 00:00:00 2001 From: Farmer Date: Wed, 3 Jul 2024 14:57:22 -0700 Subject: [PATCH 2/2] draft --- website/docs/farm-tools/three-point.md | 86 ++++++++++++++++---------- 1 file changed, 54 insertions(+), 32 deletions(-) diff --git a/website/docs/farm-tools/three-point.md b/website/docs/farm-tools/three-point.md index aa3b19a41..80937f902 100644 --- a/website/docs/farm-tools/three-point.md +++ b/website/docs/farm-tools/three-point.md @@ -4,38 +4,44 @@ title: Installation Guide --- # Three Point Lift Installation Guide -This guide is a step by step instruction on how to assemble the farm-ng three +This document will guide you through the assembly process for farm-ng's three point lift. -:::caution +:::INFO If you are missing any necessary pieces, please contact [farm-ng](https://amiga.farm-ng.com/docs/support/) immediately. ::: ## Required Hardware -1. **4** 5/8-11 Nylon lock nut -2. **2** 1/2-13 Nylon nut -3. **2** 3/4-10 Nylon lock nut -4. **32** 3/8 Nylon lock nut -5. **32** 3/8 Washer -6. **4** 1/2 Washer -7. **8** 5/8 Washer -8. **4** 3/8 Eye bolts -9. **2** Eye bolt spacers -10. **28** 3/8-16x1.25 carriage bolts -11. **4** Bridge Bushings -12. **4** Turn buckle ends -13. **4** 5/8-11 bolt -14. **4** 1/2-13 bolt -15. **4** 3/4-10 bolt +1. **32** 3/8" Nylon lock nut +2. **32** 3/8" Washer +3. **28** 3/8" - 16 x 1.25" carriage bolts +4. **4** 3/8" Eye bolts +5. **4** 1/2" Washer +6. **2** 1/2" - 13 Nylon nut +7. **2** 1/2" - 13 bolt +8. **8** 5/8" Washer +9. **4** 5/8" - 11 Nylon lock nut +10. **2** 5/8" - 11 x 3.25" bolt +11. **2** 5/8" - 11 x 3" bolt +12. **2** 3/4" - 10 Nylon lock nut +13. **2** 3/4" - 10 x 3.25" bolt +14. **4** Eye bolt spacers +15. **4** Bridge Bushings +16. **4** Turn buckle ends +17. **2** 1/4" Lynch Pins +18. **2** Leveling Box Arms +19. **2** Trailer Tow Bent Hitch Pin 5/8" x 3" Zinc Plated +20. **1** Adjustable top link Class 0 ## Tools needed -1. Socket wrenches -2. Socket sizes above -3. Needle nose pliers for bending the cotter pins on the top cylinder connection. +1. A socket set capable of tightening ⅜, ⅝, ½, and ¾ nuts and bolts. +2. A U joint adapter to facilitate socket access into to confined spaces. +3. Various wrenches + ## Assembly @@ -45,7 +51,9 @@ immediately. width="500" height="300" /> -2. Mount to the 3 point backplate to the brackets in the following way. +2. 3-point mainframe gets bolted to the 3-point frame bracket +weldment using 4 3/8-16x1.25 carriage bolts, +4 3/8 nylon lock nuts, and 4 3/8 washers. -3. Mount the upper 3 point linkage to the 3point back plate. +3. The 3 point bridge weldment is attached to the 3-point mainframe with 2 +3/4" - 10 bolts, washers, and nylon lock nuts. (Mount the upper 3 point linkage to the 3point back plate.) -4. Secure the arm brackets to the 3 point backplate. +4. Secure the 3-point lower lift arms with bends to the 3-point mainframe +using 3/4 - 10 x 3.25" bolts, washers, and nylon lock nuts. +Be sure to place the lower lift arm spacers on either side +of the ball ends connected to the 3-point mainframe. + (Secure the arm brackets to the 3 point backplate.) -5. Connect the upper 3 point linkage to the arm brackets with the adjustable lift arms. +5. Place an eye bolt spacer on the 3/8 eye bolt secured to the 3-point mainframe. + Attach another 3/8 eye bolt to the 3-point lower lift arms. + These eye bolts will be used to secure the machined turnbuckle bodies. + + (Connect the upper 3 point linkage to the arm brackets with the adjustable lift arms.) -6. Connect the turnbuckles to the arm links and the 3 point backplate. +7. Connect the Leveling Box Arms between the 3-point lower lift arms + and the 3 point bridge weldment using bolts, washers, nylon lock nuts. Make sure the ball end is connected to the 3 point bridge weldment and the forked end is connected to the 3-point lower lift arms. + +8. Connect the turnbuckles to the arm links and the 3 point backplate. -7. Connect the 3point cylinder actuator to back plate and the upper 3point linkage. +9. Connect the 3point cylinder actuator to back plate and the upper 3point linkage. Secure the cylinder with the slider pin and lock it up with the +1/4" lynch pins. + @@ -99,12 +121,12 @@ immediately. width="280" height="200" /> -8. Attach the adjustable top link to the 3 point backplate. +10. Attach the adjustable top link to the 3 point backplate. -9. In the fork closest to the dashboard, add T to the existing E-stop connection. +11. In the fork closest to the dashboard, add T to the existing E-stop connection. @@ -117,21 +139,21 @@ immediately. width="320" height="320" /> -10. Attach a CAN cable to the CAN hub. +12. Attach a CAN cable to the CAN hub. -11. Connect E-stop and CAN cables to H-bridge bringing power to it from the main harness. +13. Connect E-stop and CAN cables to H-bridge bringing power to it from the main harness. -12. Connect power to the 3point cylinder ( please note lower connection). +14. Connect power to the 3point cylinder ( please note lower connection). -13. Your result should represent the image below. +15. Your result should represent the image below.