Compilation Error for BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0 in Energia with MSP432E401Y

[dcl920108]

Description:

Thank you for your support. I encountered compilation issues when attempting to upload the BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0 firmware to the MSP432E401Y using Energia. Below are the relevant details:

Board Information:

• LaunchPad Board Name and Version: MSP432E401Y (LaunchPad w/ msp432e EMT 120MHz)
• Energia IDE Version: 1.8.11E23 (Windows 10)
• Board Package Version: MSP432E Core version 5.19.0
• Operating System: Windows 10

---

Expected Results:

The firmware should compile and upload successfully to the MSP432E401Y LaunchPad, allowing me to run the BOOSTXL-TECDRV GUI.

---

Actual Results:

Compilation fails with the following errors:

1. Warnings: 'typedef' was ignored in this declaration

   • Example:
     typedef enum {OPEN_LOOP, CLOSED_LOOP}; // Control modes

2. Ambiguous function call:

   • Example:
     ISO C++ says these are ambiguous... in the function Wire.requestFrom(TMP117_ADDRESS,2).

3. Errors from aJSON library:

   • strcasecmp and strdup were not declared in aJSON.cpp.

4. Multiple libraries issue:

   • Compiler detected multiple libraries for aJSON.h but selected the wrong one.

---

Steps to Reproduce the Problem:

1. Download the BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0 firmware from the official site.
2. Open the .ino file in Energia (1.8.11E23).
3. Select LaunchPad w/ msp432e EMT (120MHz) as the board in Tools > Board.
4. Compile the project without modifications.
5. Observe the error logs.

---

Troubleshooting Tried:

1. Verified aJSON library in libraries/ folder and removed duplicates.
2. Moved Energia installation to C:\energia-1.8.10E23 to avoid OneDrive conflicts.
3. Tried modifying the sensor type to SENS_TYPE_ANL for NTC sensors, but the errors persisted.

---

Any guidance on resolving these compilation issues would be greatly appreciated. Let me know if further details or files are needed. Thank you!

"Energia: 1.8.11E23 (Windows 10), Board: "LaunchPad w/ msp432e EMT (120MHz)"

C:\energia-1.8.10E23\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0.ino:66:1: warning: 'typedef' was ignored in this declaration

typedef enum {OPEN_LOOP, CLOSED_LOOP}; // Control modes

^~~~~~~

C:\energia-1.8.10E23\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0.ino:67:1: warning: 'typedef' was ignored in this declaration

typedef enum {SENS_TYPE_I2C, SENS_TYPE_ANL}; // Sensor types

^~~~~~~

C:\energia-1.8.10E23\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0.ino:68:1: warning: 'typedef' was ignored in this declaration

typedef enum {

^~~~~~~

C:\energia-1.8.10E23\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0.ino:81:1: warning: 'typedef' was ignored in this declaration

typedef enum {

^~~~~~~

C:\energia-1.8.10E23\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0.ino:87:1: warning: 'typedef' was ignored in this declaration

typedef enum {

^~~~~~~

C:\energia-1.8.10E23\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0.ino: In function 'void loopBOOSTXL_TECDRV_LaunchPad_Source_v1_0_0()':

C:\energia-1.8.10E23\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0.ino:173:42: warning: ISO C++ says that these are ambiguous, even though the worst conversion for the first is better than the worst conversion for the second:

     Wire.requestFrom(TMP117_ADDRESS,2);

                                      ^

In file included from C:\energia-1.8.10E23\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0\BOOSTXL_TECDRV_LaunchPad_Source_v1_0_0.ino:49:0:

C:\Users\nerod\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/Wire.h:96:17: note: candidate 1: uint8_t TwoWire::requestFrom(int, int)

     uint8_t requestFrom(int, int);

             ^~~~~~~~~~~

C:\Users\nerod\AppData\Local\Energia15\packages\energia\hardware\msp432e\5.19.0\cores\msp432e/ti/runtime/wiring/Wire.h:94:17: note: candidate 2: uint8_t TwoWire::requestFrom(uint8_t, uint8_t)

     uint8_t requestFrom(uint8_t, uint8_t);

             ^~~~~~~~~~~

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp: In member function 'aJsonObject* aJsonClass::getObjectItem(aJsonObject*, const char*)':

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp:944:41: error: 'strcasecmp' was not declared in this scope

while (c && strcasecmp(c->name, string))

                                     ^

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp: In member function 'void aJsonClass::addItemToObject(aJsonObject*, const char*, aJsonObject*)':

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp:996:29: error: 'strdup' was not declared in this scope

item->name = strdup(string);

                         ^

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp: In member function 'aJsonObject* aJsonClass::detachItemFromObject(aJsonObject*, const char*)':

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp:1038:41: error: 'strcasecmp' was not declared in this scope

while (c && strcasecmp(c->name, string))

                                     ^

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp: In member function 'void aJsonClass::replaceItemInObject(aJsonObject*, const char*, aJsonObject*)':

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp:1077:41: error: 'strcasecmp' was not declared in this scope

while (c && strcasecmp(c->name, string))

                                     ^

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp:1081:36: error: 'strdup' was not declared in this scope

   newitem->name = strdup(string);

                                ^

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp: In member function 'aJsonObject* aJsonClass::createItem(const char*)':

C:\energia-1.8.10E23\libraries\aJson\aJSON.cpp:1161:40: error: 'strdup' was not declared in this scope

   item->valuestring = strdup(string);

                                    ^

Multiple libraries were found for "aJSON.h"
Used: C:\energia-1.8.10E23\libraries\aJson
exit status 1
Error compiling for board LaunchPad w/ msp432e EMT (120MHz).

This report would have more information with
"Show verbose output during compilation"
option enabled in File -> Preferences.
"