-
-
Notifications
You must be signed in to change notification settings - Fork 113
/
Copy pathpio_local.ini_example
74 lines (64 loc) · 2.96 KB
/
pio_local.ini_example
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
; example custom platformio ini file for EMS-ESP
[common]
; custom build flags to use in my_build_flags
; -DEMSESP_UART_DEBUG ; debugging UART
; -DEMSESP_DEBUG ; enables DEBUG to the log. Will generate a lot of extra traffic on Console and Syslog
; -DEMSESP_DEFAULT_BOARD_PROFILE=\"NODEMCU\" ; hard code the default board name
; -DEMSESP_DEBUG_SENSOR ; additional debug for the sensors
; -DCORE_DEBUG_LEVEL=5 ; verbose core level debugging 5=verbose, 4=debug, 3=info
; -DEMSESP_TEST ; enable the tests. EN language only
; -DEMSESP_DE_ONLY ; only DE translated entity names
; -DEMSESP_EN_ONLY ; only EN translated entity names
; -DEMSESP_PINGTEST ; send log message every 1/2 second
; my_build_flags = -DEMSESP_TEST -DEMSESP_DEBUG
; my_build_flags = -DEMSESP_DEBUG -DEMSESP_TEST -DEMSESP_PINGTEST
; my_build_flags = -DEMSESP_DEBUG -DCORE_DEBUG_LEVEL=5
my_build_flags =
[platformio]
; default_envs = s_16M_P ; BBQKees E32V2
; default_envs = s3_16M_P ; BBQKees S3
; default_envs = s_4M ; BBQKees older S32, 4MB no psram
default_envs = s_16M ; BBQKees newer S32 V2, 16MB no psram
[env]
; uncomment this section to enable extra debug
; build_type = debug
; monitor_filters = colorize, esp32_exception_decoder
; uncomment if you want to upload the firmware via OTA (must have upload_protocol = custom)
; extra_scripts =
; pre:scripts/build_interface.py ; builds the WebUI (unless NO_BUILD_WEBUI is set) - comment out if you don't want to build each time
; scripts/rename_fw.py ; renames the firmware .bin file - comment out if not needed
; scripts/upload.py ; optionally upload the firmware via OTA (must have upload_protocol = custom)
; set the username and password for the admin account (default password is admin)
custom_username = admin
custom_password = admin
; ** upload settings **
; for direct USB, which is the default you can set an optional port for example:
; upload_port = /dev/ttyUSB0 or COM3
;
; for direct via HTTP (OTA) set:
; upload_protocol = custom
; custom_emsesp_ip = <ip address> or ems-esp.local
; upload_protocol = custom
; custom_emsesp_ip = 10.10.10.93
; ** debug settings **
; to be used with esp-prog/JTAG hardware device like https://docs.espressif.com/projects/esp-dev-kits/en/latest/other/esp-prog/user_guide.html
; pio run -e debug
; add to build_flags these additional options: EMSESP_DEBUG EMSESP_UART_DEBUG EMSESP_DEBUG_SENSOR
[env:debug]
board = esp32dev
framework = arduino
platform = espressif32
board_build.partitions = partitions/esp32_partition_debug.csv
board_upload.flash_size = 4MB
board_build.filesystem = littlefs
upload_protocol = esptool
build_type = debug
monitor_raw = no
monitor_filters = esp32_exception_decoder
debug_tool = esp-prog
debug_init_break = tbreak setup
build_flags = ${factory_settings.build_flags} -DEMSESP_EN_ONLY -DCORE_DEBUG_LEVEL=5 -DONEWIRE_CRC16=0 -DNO_GLOBAL_ARDUINOOTA -DARDUINOJSON_ENABLE_STD_STRING=1 -DESP32=1 -DARDUINO_ARCH_ESP32=1
upload_port = /dev/ttyUSB0
extra_scripts =
scripts/rename_fw.py
post:scripts/app-tls-size.py