| stage | group | info |
|---|---|---|
none |
none |
See the Technical Writers assigned to Development Guidelines: https://about.gitlab.com/handbook/product/ux/technical-writing/#assignments-to-development-guidelines |
In each release, GitLab removes features that were deprecated in an earlier release. Some features cause breaking changes when they are removed.
{rss} To be notified of upcoming breaking changes,
add this URL to your RSS feed reader: https://about.gitlab.com/breaking-changes.xml
GitLab previously created project file exports in JSON format. In GitLab 12.10, NDJSON was added as the preferred format.
To support transitions, importing JSON-formatted project file exports was still possible if you configured the relevant feature flags.
From GitLab 15.11, importing a JSON-formatted project file exports is not supported.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The Live Preview feature of the Web IDE was intended to provide a client-side preview of static web applications. However, complex configuration steps and a narrow set of supported project types have limited its utility. With the introduction of the Web IDE Beta in GitLab 15.7, you can now connect to a full server-side runtime environment. With upcoming support for installing extensions in the Web IDE, we’ll also support more advanced workflows than those available with Live Preview. As of GitLab 15.9, Live Preview is no longer available in the Web IDE.
All functionality related to the GitLab Container Network Security and Container Host Security categories was deprecated in GitLab 14.8 and scheduled for removal in GitLab 15.0. The CiliumNetworkPolicy definition that exists as part of the GitLab Auto Deploy Helm chart was not removed as scheduled in GitLab 15.0. This policy is planned to be removed in the GitLab 15.8 release.
If you want to preserve this functionality, you can follow one of these two paths:
- Fork the GitLab Auto Deploy Helm chart into the
chart/path within your project - Set
AUTO_DEPLOY_IMAGE_VERSIONandDAST_AUTO_DEPLOY_IMAGE_VERSIONto the most recent version of the image that included the CiliumNetworkPolicy
GitLab previously created group file exports in JSON format. In GitLab 13.10, NDJSON was added as the preferred format.
To support transitions, importing JSON-formatted group file exports was still possible if you configured the relevant feature flags.
From GitLab 15.8, importing a JSON-formatted group file exports is not supported.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The artifacts:public CI/CD keyword was discovered to be not working properly since GitLab 15.8 and needed to be refactored. This feature is disabled on GitLab.com, and disabled by default on self-managed instances. If an administrator for an instance running GitLab 15.8 or 15.9 enabled this feature via the non_public_artifacts feature flag, it is likely that artifacts created with the public:false setting are being treated as public:true.
If you have projects that use this setting, you should delete artifacts that must not be public, or change the visibility of affected projects to private, before updating to GitLab 15.8 or later.
In GitLab 15.10, this feature's code was refactored. On instances with this feature enabled, new artifacts created with public:false are now working as expected, though still disabled by default. Avoid testing this feature with production data until it is enabled by default and made generally available.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Prior to this change, variables that referenced or applied alias file variables expanded the value of the File type variable. For example, the file contents. This behavior was incorrect because it did not comply with typical shell variable expansion rules. A user could run an $echo command with the variable as an input parameter to leak secrets or sensitive information stored in 'File' type variables.
In 15.7, we are removing file type variable expansion from GitLab. It is essential to check your CI pipelines to confirm if your scripts reference a file variable. If your CI job relies on the previous expansion functionality, that CI job will not work and generate an error as of 15.7. The new behavior is that variable expansion that reference or apply alias file variables expand to the file name or path of the File type variable, instead of its value, such as the file contents.
As of December 22, 2022, we are removing the Flowdock integration because the service was shut down on August 15, 2022.
As of November 22, 2022, we have removed support for customers using NFS for Git repository storage. This was originally planned for May 22, 2022, but in an effort to allow continued maturity of Gitaly Cluster, we delayed our removal of support date until now. Please see our official Statement of Support for further information.
This change in support follows the development deprecation for NFS for Git repository storage that occurred in GitLab 14.0.
Gitaly Cluster offers tremendous benefits for our customers such as:
We encourage customers currently using NFS for Git repositories to migrate as soon as possible by reviewing our documentation on migrating to Gitaly Cluster.
WARNING: This is a breaking change. Review the details carefully before upgrading.
We have replaced the GitLab SAST analyzers for certain languages in GitLab 15.4 as part of our long-term strategy to deliver a more consistent user experience, faster scan times, and reduced CI minute usage.
Starting from GitLab 15.4, the GitLab-managed SAST CI/CD template uses Semgrep-based scanning instead of the following analyzers:
We will no longer make any updates to the ESLint-, Gosec-, and Bandit-based analyzers. The SpotBugs-based analyzer will continue to be used for Groovy, Kotlin, and Scala scanning.
We won't delete container images previously published for these analyzers, so older versions of the CI/CD template will continue to work.
If you changed the default GitLab SAST configuration, you may need to update your configuration as detailed in the deprecation issue for this change.
Long term service and support (LTSS) for Debian 9 Stretch ended in July 2022. Therefore, we will no longer support the Debian 9 distribution for the GitLab package. Users can upgrade to Debian 10 or Debian 11.
The ability to sort the Vulnerability Report by the State column was disabled and put behind a feature flag in GitLab 14.10 due to a refactor
of the underlying data model. The feature flag has remained off by default as further refactoring will be required to ensure sorting
by this value remains performant. Due to very low usage of the State column for sorting, the feature flag is instead removed in 15.3 to simplify the codebase and prevent any unwanted performance degradation.
The ability to sort the Vulnerability Report by the Tool column (scan type) was disabled and put behind a feature flag in GitLab 14.10 due to a refactor
of the underlying data model. The feature flag has remained off by default as further refactoring will be required to ensure sorting
by this value remains performant. Due to very low usage of the Tool column for sorting, the feature flag is instead removed in
GitLab 15.3 to simplify the codebase and prevent any unwanted performance degradation.
In GitLab 15.2, we are cleaning up and removing old code that was specific for browsers that we no longer support. This has no impact on users if they use one of our supported web browsers.
Most notably, support for the following browsers has been removed:
- Apple Safari 14 and older.
- Mozilla Firefox 78.
The minimum supported browser versions are:
- Apple Safari 14.1.
- Mozilla Firefox 91.
- Google Chrome 92.
- Chromium 92.
- Microsoft Edge 92.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The Runner API endpoints have changed in 15.0.
If a runner has not contacted the GitLab instance in more than three months, the API returns stale instead of offline or not_connected.
The stale status was introduced in 14.6.
The not_connected status is no longer valid. It was replaced with never_contacted. Available statuses are online, offline, stale, and never_contacted.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Audit events for repository events are removed as of GitLab 15.0.
Audit events for repository events were always disabled by default and had to be manually enabled with a feature flag. Enabling them could slow down GitLab instances by generating too many events. Therefore, they are removed.
Please note that we will add high-volume audit events in the future as part of streaming audit events. An example of this is how we will send Git fetch actions as a streaming audit event. If you would be interested in seeing repository push events or some other action as a streaming audit event, please reach out to us!
WARNING: This is a breaking change. Review the details carefully before upgrading.
To reduce the overall complexity and maintenance burden of GitLab's object storage feature, support for using background_upload has been removed in GitLab 15.0.
By default direct upload will be used.
This impacts a subset of object storage providers, including but not limited to:
- OpenStack Customers using OpenStack need to change their configuration to use the S3 API instead of Swift.
- RackSpace Customers using RackSpace-based object storage need to migrate data to a different provider.
If your object storage provider does not support background_upload, please migrate objects to a supported object storage provider.
Additionally, this also breaks the use of encrypted S3 buckets with storage-specific configuration form.
If your S3 buckets have SSE-S3 or SSE-KMS encryption enabled, please migrate your configuration to use consolidated object storage form before upgrading to GitLab 15.0. Otherwise, you may start getting ETag mismatch errors during objects upload.
If you see 403 errors when uploading to object storage after
upgrading to GitLab 15.0, check that the correct permissions
are assigned to the bucket. Direct upload needs the ability to delete an
object (example: s3:DeleteObject), but background uploads do not.
If the object storage remote_directory configuration contains a slash (/) after the bucket (example: gitlab/uploads), be aware that this was never officially supported.
Some users found that they could specify a path prefix to the bucket. In direct upload mode, object storage uploads will fail if a slash is present in GitLab 15.0.
If you have set a prefix, you can use a workaround to revert to background uploads:
-
Continue to use storage-specific configuration.
-
In Omnibus GitLab, set the
GITLAB_LEGACY_BACKGROUND_UPLOADSto re-enable background uploads:gitlab_rails['env'] = { 'GITLAB_LEGACY_BACKGROUND_UPLOADS' => 'artifacts,external_diffs,lfs,uploads,packages,dependency_proxy,terraform_state,pages' }
Support for prefixes was restored in GitLab 15.2 via this MR.
Support for setting GITLAB_LEGACY_BACKGROUND_UPLOADS will be removed in GitLab 15.4.
WARNING: This is a breaking change. Review the details carefully before upgrading.
All functionality related to the Container Network Security and Container Host Security categories was deprecated in GitLab 14.8 and is scheduled for removal in GitLab 15.0. Users who need a replacement for this functionality are encouraged to evaluate the following open source projects as potential solutions that can be installed and managed outside of GitLab: AppArmor, Cilium, Falco, FluentD, Pod Security Admission. To integrate these technologies with GitLab, add the desired Helm charts in your copy of the Cluster Management Project Template. Deploy these Helm charts in production by calling commands through GitLab CI/CD.
As part of this change, the following capabilities within GitLab are scheduled for removal in GitLab 15.0:
- The Security & Compliance > Threat Monitoring page.
- The Network Policy security policy type, as found on the Security & Compliance > Policies page.
- The ability to manage integrations with the following technologies through GitLab: AppArmor, Cilium, Falco, FluentD, and Pod Security Policies.
- All APIs related to the above functionality.
For additional context, or to provide feedback regarding this change, please reference our deprecation issue.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The Container Registry supports authentication with htpasswd. It relies on an Apache htpasswd file, with passwords hashed using bcrypt.
Since it isn't used in the context of GitLab (the product), htpasswd authentication will be deprecated in GitLab 14.9 and removed in GitLab 15.0.
In GitLab 14.8, we deprecated the geo:db:* Rake tasks and replaced them with built-in tasks after switching the Geo tracking database to use Rails' 6 support of multiple databases.
The following geo:db:* tasks have been removed from GitLab 15.0 and have been replaced with their corresponding db:*:geo tasks:
geo:db:drop->db:drop:geogeo:db:create->db:create:geogeo:db:setup->db:setup:geogeo:db:migrate->db:migrate:geogeo:db:rollback->db:rollback:geogeo:db:version->db:version:geogeo:db:reset->db:reset:geogeo:db:seed->db:seed:geogeo:schema:load:geo->db:schema:load:geogeo:db:schema:dump->db:schema:dump:geogeo:db:migrate:up->db:migrate:up:geogeo:db:migrate:down->db:migrate:down:geogeo:db:migrate:redo->db:migrate:redo:geogeo:db:migrate:status->db:migrate:status:geogeo:db:test:prepare->db:test:prepare:geogeo:db:test:load->db:test:load:geogeo:db:test:purge->db:test:purge:geo
WARNING: This is a breaking change. Review the details carefully before upgrading.
We are removing the DS_DEFAULT_ANALYZERS environment variable from Dependency Scanning on May 22, 2022 in 15.0. After this removal, this variable's value will be ignored. To configure which analyzers to run with the default configuration, you should use the DS_EXCLUDED_ANALYZERS variable instead.
WARNING: This is a breaking change. Review the details carefully before upgrading.
For Dependency Scanning, the default version of Java that the scanner expects will be updated from 11 to 17. Java 17 is the most up-to-date Long Term Support (LTS) version. Dependency Scanning continues to support the same range of versions (8, 11, 13, 14, 15, 16, 17), only the default version is changing. If your project uses the previous default of Java 11, be sure to set the DS_JAVA_VERSION variable to match. Please note that consequently the default version of Gradle is now 7.3.3.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The logging features in GitLab allow users to install the ELK stack (Elasticsearch, Logstash, and Kibana) to aggregate and manage application logs. Users could search for relevant logs in GitLab directly. However, since deprecating certificate-based integration with Kubernetes clusters and GitLab Managed Apps, this feature is no longer available. For more information on the future of logging and observability, you can follow the issue for integrating Opstrace with GitLab.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Elasticsearch 6.8 support has been removed in GitLab 15.0. Elasticsearch 6.8 has reached end of life. If you use Elasticsearch 6.8, you must upgrade your Elasticsearch version to 7.x prior to upgrading to GitLab 15.0. You should not upgrade to Elasticsearch 8 until you have completed the GitLab 15.0 upgrade.
View the version requirements for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
For those using Dependency Scanning for Python projects, we are removing support for the default gemnasium-python:2 image which uses Python 3.6, as well as the custom gemnasium-python:2-python-3.9 image which uses Python 3.9. The new default image as of GitLab 15.0 will be for Python 3.9 as it is a supported version and 3.6 is no longer supported.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The external status check API was originally implemented to support pass-by-default requests to mark a status check as passing. Pass-by-default requests are now removed. Specifically, the following are removed:
- Requests that do not contain the
statusfield. - Requests that have the
statusfield set toapproved.
From GitLab 15.0, status checks are only set to a passing state if the status field is both present
and set to passed. Requests that:
- Do not contain the
statusfield will be rejected with a400error. For more information, see the relevant issue. - Contain any value other than
passed, such asapproved, cause the status check to fail. For more information, see the relevant issue.
To align with this change, API calls to list external status checks also return the value of passed rather than
approved for status checks that have passed.
WARNING: This is a breaking change. Review the details carefully before upgrading.
All functionality related to GitLab Serverless was deprecated in GitLab 14.3 and is scheduled for removal in GitLab 15.0. Users who need a replacement for this functionality are encouraged to explore using the following technologies with GitLab CI/CD:
For additional context, or to provide feedback regarding this change, please reference our deprecation issue.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Configuring the Gitaly nodes directly in the virtual storage's root configuration object has been deprecated in GitLab 13.12 and is no longer supported in GitLab 15.0. You must move the Gitaly nodes under the 'nodes' key as described in the Praefect configuration.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The GitLab Package stage offers a Package Registry, Container Registry, and Dependency Proxy to help you manage all of your dependencies using GitLab. Each of these product categories has a variety of settings that can be adjusted using the API.
The permissions model for GraphQL is being updated. After 15.0, users with the Guest, Reporter, and Developer role can no longer update these settings:
- Package Registry settings
- Container Registry cleanup policy
- Dependency Proxy time-to-live policy
- Enabling the Dependency Proxy for your group
The issue for this removal is GitLab-#350682
WARNING: This is a breaking change. Review the details carefully before upgrading.
Tracing in GitLab is an integration with Jaeger, an open-source end-to-end distributed tracing system. GitLab users could previously navigate to their Jaeger instance to gain insight into the performance of a deployed application, tracking each function or microservice that handles a given request. Tracing in GitLab was deprecated in GitLab 14.7, and removed in 15.0. To track work on a possible replacement, see the issue for Opstrace integration with GitLab.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 14.3, we added a configuration setting in the GitLab Runner config.toml. This setting, [runners.ssh.disable_strict_host_key_checking], controls whether or not to use strict host key checking with the SSH executor.
In GitLab 15.0, the default value for this configuration option has changed from true to false. This means that strict host key checking will be enforced when using the GitLab Runner SSH executor.
In GitLab 13.0, we introduced new project and design replication details routes in the Geo Admin UI. These routes are /admin/geo/replication/projects and /admin/geo/replication/designs. We kept the legacy routes and redirected them to the new routes. These legacy routes /admin/geo/projects and /admin/geo/designs have been removed in GitLab 15.0. Please update any bookmarks or scripts that may use the legacy routes.
We have now removed the deprecated legacy names for approval status of license policy (blacklisted, approved) in the API queries and responses. If you are using our License Compliance API you should stop using the approved and blacklisted query parameters, they are now allowed and denied. In 15.0 the responses will also stop using approved and blacklisted so you may need to adjust any of your custom tools.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The Gitaly Cluster configuration keys for praefect['database_host_no_proxy'] and praefect['database_port_no_proxy'] are replaced with praefect['database_direct_host'] and praefect['database_direct_port'].
WARNING: This is a breaking change. Review the details carefully before upgrading.
The custom_hooks_dir setting is now configured in Gitaly, and is removed from GitLab Shell in GitLab 15.0.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The OAuth implicit grant authorization flow is no longer supported. Any applications that use OAuth implicit grant must switch to alternative supported OAuth flows.
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab no longer supports OAuth tokens without an expiration.
Any existing token without an expiration has one automatically generated and applied.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Disabling SSH expiration enforcement is unusual from a security perspective and could create unusual situations where an expired key is unintentionally able to be used. Unexpected behavior in a security feature is inherently dangerous and so now we enforce expiration on all SSH keys.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Allowing expired personal access tokens to be used is unusual from a security perspective and could create unusual situations where an expired key is unintentionally able to be used. Unexpected behavior in a security feature is inherently dangerous and so we now do not let expired personal access tokens be used.
The GitLab SAST SpotBugs analyzer scans Java, Scala, Groovy, and Kotlin code for security vulnerabilities. For technical reasons, the analyzer must first compile the code before scanning. Unless you use the pre-compilation strategy, the analyzer attempts to automatically compile your project's code.
In GitLab versions prior to 15.0, the analyzer image included Java 8 and Java 11 runtimes to facilitate compilation.
As of GitLab 15.0, we've:
- Removed Java 8 from the analyzer image to reduce the size of the image.
- Added Java 17 to the analyzer image to make it easier to compile with Java 17.
- Changed the default Java version from Java 8 to Java 17.
If you rely on Java 8 being present in the analyzer environment, you must take action as detailed in the deprecation issue for this change.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GraphQL, there are two pipelines fields that you can use in a PackageDetailsType to get the pipelines for package versions:
- The
versionsfield'spipelinesfield. This returns all the pipelines associated with all the package's versions, which can pull an unbounded number of objects in memory and create performance concerns. - The
pipelinesfield of a specificversion. This returns only the pipelines associated with that single package version.
To mitigate possible performance problems, we will remove the versions field's pipelines field in GitLab 15.0. Although you will no longer be able to get all pipelines for all versions of a package, you can still get the pipelines of a single version through the remaining pipelines field for that version.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The Pseudonymizer feature is generally unused, can cause production issues with large databases, and can interfere with object storage development. It was removed in GitLab 15.0.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Request profiling has been removed in GitLab 15.0.
We're working on consolidating our profiling tools and making them more easily accessible. We evaluated the use of this feature and we found that it is not widely used. It also depends on a few third-party gems that are not actively maintained anymore, have not been updated for the latest version of Ruby, or crash frequently when profiling heavy page loads.
For more information, check the summary section of the deprecation issue.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Required pipeline configuration helps to define and mandate organization-wide pipeline configurations and is a requirement at an executive and organizational level. To align better with our pricing philosophy, this feature is removed from the Premium tier in GitLab 15.0. This feature continues to be available in the GitLab Ultimate tier.
We recommend customers use Compliance Pipelines, also in GitLab Ultimate, as an alternative as it provides greater flexibility, allowing required pipelines to be assigned to specific compliance framework labels.
This change also helps GitLab remain consistent in our tiering strategy with the other related Ultimate-tier features:
WARNING: This is a breaking change. Review the details carefully before upgrading.
We have removed support for retire.js from Dependency Scanning as of May 22, 2022 in GitLab 15.0. JavaScript scanning functionality will not be affected as it is still being covered by Gemnasium.
If you have explicitly excluded retire.js using the DS_EXCLUDED_ANALYZERS variable, then you will be able to remove the reference to retire.js. If you have customized your pipeline’s Dependency Scanning configuration related to the retire-js-dependency_scanning job, then you will want to switch to gemnasium-dependency_scanning. If you have not used the DS_EXCLUDED_ANALYZERS to reference retire.js, or customized your template specifically for retire.js, you will not need to take any action.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The GitLab Runner REST and GraphQL API endpoints
deprecated the not_connected status value in GitLab 14.6 and will start returning never_contacted in its place
starting in GitLab 15.0.
Runners that have never contacted the GitLab instance will also return stale if created more than 3 months ago.
The GitLab SAST Security Code Scan analyzer scans .NET code for security vulnerabilities. For technical reasons, the analyzer must first build the code to scan it.
In GitLab versions prior to 15.0, the default analyzer image (version 2) included support for:
- .NET 2.1
- .NET Core 3.1
- .NET 5.0
In GitLab 15.0, we've changed the default major version for this analyzer from version 2 to version 3. This change:
- Adds severity values for vulnerabilities along with other new features and improvements.
- Removes .NET 2.1 support.
- Adds support for .NET 6.0, Visual Studio 2019, and Visual Studio 2022.
Version 3 was announced in GitLab 14.6 and made available as an optional upgrade.
If you rely on .NET 2.1 support being present in the analyzer image by default, you must take action as detailed in the deprecation issue for this change.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Long term service and support (LTSS) for SUSE Linux Enterprise Server (SLES) 12 SP2 ended on March 31, 2021. The CA certificates on SP2 include the expired DST root certificate, and it's not getting new CA certificate package updates. We have implemented some workarounds, but we will not be able to continue to keep the build running properly.
To make it simpler and more reliable to customize GitLab Secret Detection, we've removed some of the variables that you could previously set in your CI/CD configuration.
The following variables previously allowed you to customize the options for historical scanning, but interacted poorly with the GitLab-managed CI/CD template and are now removed:
SECRET_DETECTION_COMMIT_FROMSECRET_DETECTION_COMMIT_TOSECRET_DETECTION_COMMITSSECRET_DETECTION_COMMITS_FILE
The SECRET_DETECTION_ENTROPY_LEVEL previously allowed you to configure rules that only considered the entropy level of strings in your codebase, and is now removed.
This type of entropy-only rule created an unacceptable number of incorrect results (false positives).
You can still customize the behavior of the Secret Detection analyzer using the available CI/CD variables.
For further details, see the deprecation issue for this change.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In 15.0 the certificate-based integration with Kubernetes will be disabled by default.
After 15.0, you should use the agent for Kubernetes to connect Kubernetes clusters with GitLab. The agent for Kubernetes is a more robust, secure, and reliable integration with Kubernetes. How do I migrate to the agent?
If you need more time to migrate, you can enable the certificate_based_clusters feature flag, which re-enables the certificate-based integration.
In GitLab 16.0, we will remove the feature, its related code, and the feature flag. GitLab will continue to fix any security or critical issues until 16.0.
For updates and details, follow this epic.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 15.0, you can no longer serve Sidekiq metrics and health checks over a single address and port.
To improve stability, availability, and prevent data loss in edge cases, GitLab now serves Sidekiq metrics and health checks from two separate servers.
When you use Omnibus or Helm charts, if GitLab is configured for both servers to bind to the same address, a configuration error occurs. To prevent this error, choose different ports for the metrics and health check servers:
If you installed GitLab from source, verify manually that both servers are configured to bind to separate addresses and ports.
The Static Site Editor was deprecated in GitLab 14.7 and the feature is being removed in GitLab 15.0. Incoming requests to the Static Site Editor will be redirected and open the target file to edit in the Web IDE. Current users of the Static Site Editor can view the documentation for more information, including how to remove the configuration files from existing projects. We will continue investing in improvements to the Markdown editing experience by maturing the Content Editor and making it available as a way to edit content across GitLab.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Gitaly introduced a new directory that holds all runtime data Gitaly requires to operate correctly. This new directory replaces the old internal socket directory, and consequentially the usage of gitaly['internal_socket_dir'] was deprecated in favor of gitaly['runtime_dir'].
WARNING: This is a breaking change. Review the details carefully before upgrading.
The syntax of GitLab's database
configuration located in database.yml has changed and the legacy format has been removed.
The legacy format supported a single PostgreSQL adapter, whereas the new format supports multiple databases.
The main: database needs to be defined as a first configuration item.
This change only impacts users compiling GitLab from source, all the other installation methods handle this configuration automatically. Instructions are available in the source update documentation.
WARNING: This is a breaking change. Review the details carefully before upgrading.
To specify a test coverage pattern, in GitLab 15.0 the project setting for test coverage parsing has been removed.
To set test coverage parsing, use the project’s .gitlab-ci.yml file by providing a regular expression with the
coverage keyword.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 14.5, we introduced the command gitlab-ctl promote to promote any Geo secondary node to a primary during a failover. This command replaces gitlab-ctl promote-db which is used to promote database nodes in multi-node Geo secondary sites. The gitlab-ctl promote-db command has been removed in GitLab 15.0.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 15.0, support for the tags and tags_count parameters will be removed from the Container Registry API that gets registry repositories from a group.
The GET /groups/:id/registry/repositories endpoint will remain, but won't return any info about tags. To get the info about tags, you can use the existing GET /registry/repositories/:id endpoint, which will continue to support the tags and tag_count options as it does today. The latter must be called once per image repository.
WARNING: This is a breaking change. Review the details carefully before upgrading.
As part of the work to create a Package Registry GraphQL API, the Package group deprecated the Version type for the basic PackageType type and moved it to PackageDetailsType.
In GitLab 15.0, we will completely remove Version from PackageType.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The vulnerability check feature was deprecated in GitLab 14.8 and is scheduled for removal in GitLab 15.0. We encourage you to migrate to the new security approvals feature instead. You can do so by navigating to Security & Compliance > Policies and creating a new Scan Result Policy.
The new security approvals feature is similar to vulnerability check. For example, both can require approvals for MRs that contain security vulnerabilities. However, security approvals improve the previous experience in several ways:
- Users can choose who is allowed to edit security approval rules. An independent security or compliance team can therefore manage rules in a way that prevents development project maintainers from modifying the rules.
- Multiple rules can be created and chained together to allow for filtering on different severity thresholds for each scanner type.
- A two-step approval process can be enforced for any desired changes to security approval rules.
- A single set of security policies can be applied to multiple development projects to allow for ease in maintaining a single, centralized ruleset.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The Managed-Cluster-Applications.gitlab-ci.yml CI/CD template is being removed. If you need an alternative, try the Cluster Management project template instead. If your are not ready to move, you can copy the last released version of the template into your project.
WARNING: This is a breaking change. Review the details carefully before upgrading.
As of GitLab 15.0, the artifacts:reports:cobertura
keyword has been replaced by
artifacts:reports:coverage_report.
Cobertura is the only supported report file, but this is the first step towards GitLab supporting other report types.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The GraphQL API field defaultMergeCommitMessageWithDescription has been removed in GitLab 15.0. For projects with a commit message template set, it will ignore the template.
WARNING: This is a breaking change. Review the details carefully before upgrading.
A feature flag was introduced in GitLab 13.7 as part of the change to require authentication to use the Dependency Proxy. Before GitLab 13.7, you could use the Dependency Proxy without authentication.
In GitLab 15.0, we will remove the feature flag, and you must always authenticate when you use the Dependency Proxy.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The omniauth-kerberos gem is no longer supported. This gem has not been maintained and has very little usage. Therefore, we
removed support for this authentication method and recommend using SPEGNO instead. You can
follow the upgrade instructions
to upgrade from the removed integration to the new supported one.
We are not removing Kerberos SPNEGO integration. We are removing the old password-based Kerberos.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 14.5, we introduced the command gitlab-ctl promote to promote any Geo secondary node to a primary during a failover. This command replaces gitlab-ctl promote-to-primary-node which was only usable for single-node Geo sites. gitlab-ctl promote-to-primary-node has been removed in GitLab 15.0.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The push_rules_supersede_code_owners feature flag has been removed in GitLab 15.0. From now on, push rules will supersede the CODEOWNERS file. Even if Code Owner approval is required, a push rule that explicitly allows a specific user to push code supersedes the Code Owners setting.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The type and types CI/CD keywords is removed in GitLab 15.0, so pipelines that use these keywords fail with a syntax error. Switch to stage and stages, which have the same behavior.
WARNING: This is a breaking change. Review the details carefully before upgrading.
We are removing bundler-audit from Dependency Scanning on May 22, 2022 in 15.0. After this removal, Ruby scanning functionality will not be affected as it is still being covered by Gemnasium.
If you have explicitly excluded bundler-audit using the DS_EXCLUDED_ANALYZERS variable, then you will be able to remove the reference to bundler-audit. If you have customized your pipeline’s Dependency Scanning configuration related to the bundler-audit-dependency_scanning job, then you will want to switch to gemnasium-dependency_scanning. If you have not used the DS_EXCLUDED_ANALYZERS to reference bundler-audit or customized your template specifically for bundler-audit, you will not need to take any action.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The GitLab Composer repository can be used to push, search, fetch metadata about, and download PHP dependencies. All these actions require authentication, except for downloading dependencies.
Downloading Composer dependencies without authentication is deprecated in GitLab 14.9, and will be removed in GitLab 15.0. Starting with GitLab 15.0, you must authenticate to download Composer dependencies.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 14.4, GitLab released an integrated error tracking backend that replaces Sentry. This feature caused database performance issues. In GitLab 14.9, integrated error tracking is removed from GitLab.com, and turned off by default in GitLab self-managed. While we explore the future development of this feature, please consider switching to the Sentry backend by changing your error tracking to Sentry in your project settings.
For additional background on this removal, please reference Disable Integrated Error Tracking by Default. If you have feedback please add a comment to Feedback: Removal of Integrated Error Tracking.
A large amount of triggered pipelines in a single project impacts the performance of GitLab.com. In GitLab 14.6, we are limiting the number of triggered pipelines in a single project on GitLab.com at any given moment to 25,000. This change applies to projects in the free tier only, Premium and Ultimate are not affected by this change.
The release-cli will be released as a generic package starting in GitLab 14.2. We will continue to deploy it as a binary to S3 until GitLab 14.5 and stop distributing it in S3 in GitLab 14.6.
GitLab values efficiency and is prioritizing reliability for GitLab.com in FY22. In 14.3, GitLab CI/CD jobs must have less than 50 tags. If a pipeline contains a job with 50 or more tags, you will receive an error and the pipeline will not be created.
In GitLab 14.3, we will remove the ability to filter by name in the list project pipelines API endpoint to improve performance. If you currently use this parameter with this endpoint, you must switch to username.
The support for gitlab_pages['use_legacy_storage'] setting in Omnibus installations has been removed.
In 14.0 we removed domain_config_source which had been previously deprecated, and allowed users to specify disk storage. In 14.0 we added use_legacy_storage as a temporary flag to unblock upgrades, and allow us to debug issues with our users and it was deprecated and communicated for removal in 14.3.
GitLab values efficiency for all users in our wider community of contributors, so we're always working hard to make sure the application performs at a high level with a lovable UX. In GitLab 14.2, we have introduced a job log file size limit, set to 100 megabytes by default. Administrators of self-managed GitLab instances can customize this to any value. All jobs that exceed this limit are dropped and marked as failed, helping prevent performance impacts or over-use of resources. This ensures that everyone using GitLab has the best possible experience.
The support for prometheus.listen_address and prometheus.enable has been removed from gitlab.yml. Use prometheus.enabled and prometheus.server_address to set up Prometheus server that GitLab instance connects to. Refer to our documentation for details.
This only affects new installations from source where users might use the old configurations.
In GitLab 14.1, we are cleaning up and removing old code that was specific for browsers that we no longer support. This has no impact on users when one of our supported web browsers is used.
Most notably, support for the following browsers has been removed:
- Apple Safari 13 and older.
- Mozilla Firefox 68.
- Pre-Chromium Microsoft Edge.
The minimum supported browser versions are:
- Apple Safari 13.1.
- Mozilla Firefox 78.
- Google Chrome 84.
- Chromium 84.
- Microsoft Edge 84.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 14.0, we will update the Auto Deploy CI template to the latest version. This includes new features, bug fixes, and performance improvements with a dependency on the v2 auto-deploy-image. Auto Deploy CI template v1 is deprecated going forward.
Since the v1 and v2 versions are not backward-compatible, your project might encounter an unexpected failure if you already have a deployed application. Follow the upgrade guide to upgrade your environments. You can also start using the latest template today by following the early adoption guide.
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab 14.0 renews the Terraform CI template to the latest version. The new template is set up for the GitLab Managed Terraform state, with a dependency on the GitLab terraform-images image, to provide a good user experience around GitLab's Infrastructure-as-Code features.
The current stable and latest templates are not compatible, and the current latest template becomes the stable template beginning with GitLab 14.0, your Terraform pipeline might encounter an unexpected failure if you run a custom init job.
WARNING: This is a breaking change. Review the details carefully before upgrading.
By default, the Code Quality feature has not provided support for Ruby 2.6+ if you're using the Code Quality template. To better support the latest versions of Ruby, the default RuboCop version is updated to add support for Ruby 2.4 through 3.0. As a result, support for Ruby 2.1, 2.2, and 2.3 is removed. You can re-enable support for older versions by customizing your configuration.
Relevant Issue: Default codeclimate-rubocop engine does not support Ruby 2.6+
WARNING: This is a breaking change. Review the details carefully before upgrading.
Clair, the default container scanning engine, was deprecated in GitLab 13.9 and is removed from GitLab 14.0 and replaced by Trivy. We advise customers who are customizing variables for their container scanning job to follow these instructions to ensure that their container scanning jobs continue to work.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 14.0, we've removed the stages defined in the current DAST.gitlab-ci.yml template to avoid the situation where the template overrides manual changes made by DAST users. We're making this change in response to customer issues where the stages in the template cause problems when used with customized DAST configurations. Because of this removal, gitlab-ci.yml configurations that do not specify a dast stage must be updated to include this stage.
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab 13.8 renamed multiple environment variables to support their broader usage in different workflows. In GitLab 14.0, the old variables have been permanently removed and will no longer work. Any configurations using these variables must be updated to the new variable names. Any scans using these variables in GitLab 14.0 and later will fail to be configured correctly. These variables are:
DAST_AUTH_EXCLUDE_URLSbecomesDAST_EXCLUDE_URLS.AUTH_EXCLUDE_URLSbecomesDAST_EXCLUDE_URLS.AUTH_USERNAMEbecomesDAST_USERNAME.AUTH_PASSWORDbecomesDAST_PASSWORD.AUTH_USERNAME_FIELDbecomesDAST_USERNAME_FIELD.AUTH_PASSWORD_FIELDbecomesDAST_PASSWORD_FIELD.DAST_ZAP_USE_AJAX_SPIDERwill now beDAST_USE_AJAX_SPIDER.DAST_FULL_SCAN_DOMAIN_VALIDATION_REQUIREDwill be removed, since the feature is being removed.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Browser Performance Testing has run in a job named performance by default. With the introduction of Load Performance Testing in GitLab 13.2, this naming could be confusing. To make it clear which job is running Browser Performance Testing, the default job name is changed from performance to browser_performance in the template in GitLab 14.0.
Relevant Issue: Rename default Browser Performance Testing job
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab 14.0, DAST has removed the current method of resetting the scan to the hostname when starting to spider. Prior to GitLab 14.0, the spider would not begin at the specified target path for the URL but would instead reset the URL to begin crawling at the host root. GitLab 14.0 changes the default for the new variable DAST_SPIDER_START_AT_HOST to false to better support users' intention of beginning spidering and scanning at the specified target URL, rather than the host root URL. This change has an added benefit: scans can take less time, if the specified path does not contain links to the entire site. This enables easier scanning of smaller sections of an application, rather than crawling the entire app during every scan.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Every Git repository has an initial branch, which is named master by default. It's the first branch to be created automatically when you create a new repository. Future Git versions will change the default branch name in Git from master to main. In coordination with the Git project and the broader community, GitLab has changed the default branch name for new projects on both our SaaS (GitLab.com) and self-managed offerings starting with GitLab 14.0. This will not affect existing projects.
GitLab has already introduced changes that allow you to change the default branch name both at the instance level (for self-managed users) and at the group level (for both SaaS and self-managed users). We encourage you to make use of these features to set default branch names on new projects.
For more information, check out our blog post.
WARNING: This is a breaking change. Review the details carefully before upgrading.
As mentioned in 13.9 and this blog post several removals for Dependency Scanning take effect.
Previously, to exclude a DS analyzer, you needed to remove it from the default list of analyzers, and use that to set the DS_DEFAULT_ANALYZERS variable in your project’s CI template. We determined it should be easier to avoid running a particular analyzer without losing the benefit of newly added analyzers. As a result, we ask you to migrate from DS_DEFAULT_ANALYZERS to DS_EXCLUDED_ANALYZERS when it is available. Read about it in issue #287691.
Previously, to prevent the Gemnasium analyzers to fetch the advisory database at runtime, you needed to set the GEMNASIUM_DB_UPDATE variable. However, this is not documented properly, and its naming is inconsistent with the equivalent BUNDLER_AUDIT_UPDATE_DISABLED variable. As a result, we ask you to migrate from GEMNASIUM_DB_UPDATE to GEMNASIUM_UPDATE_DISABLED when it is available. Read about it in issue #215483.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In accordance with our GraphQL deprecation and removal process, the following fields that were deprecated prior to 13.7 are fully removed in 14.0:
Mutations::Todos::MarkAllDone,Mutations::Todos::RestoreMany-:updated_idsMutations::DastScannerProfiles::Create,Types::DastScannerProfileType-:global_idTypes::SnippetType-:blobEE::Types::GroupType,EE::Types::QueryType-:vulnerabilities_count_by_day_and_severityDeprecatedMutations (concern**)-AddAwardEmoji,RemoveAwardEmoji,ToggleAwardEmojiEE::Types::DeprecatedMutations (concern***)-Mutations::Pipelines::RunDastScan,Mutations::Vulnerabilities::Dismiss,Mutations::Vulnerabilities::RevertToDetected
WARNING: This is a breaking change. Review the details carefully before upgrading.
The first release of the DevOps Adoption report had a concept of Segments. Segments were quickly removed from the report because they introduced an additional layer of complexity on top of Groups and Projects. Subsequent iterations of the DevOps Adoption report focus on comparing adoption across groups rather than segments. GitLab 14.0 removes all references to Segments from the GraphQL API and replaces them with Enabled groups.
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab Pages API-based configuration has been available since GitLab 13.0. It replaces the unsupported disk source configuration removed in GitLab 14.0, which can no longer be chosen. You should stop using disk source configuration, and move to gitlab for an API-based configuration. To migrate away from the 'disk' source configuration, set gitlab_pages['domain_config_source'] = "gitlab" in your /etc/gitlab/gitlab.rb file. We recommend you migrate before updating to GitLab 14.0, to identify and troubleshoot any potential problems before upgrading.
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab supports a queue selector to run only a subset of background jobs for a given process. When it was introduced, this option had an 'experimental' prefix (experimental_queue_selector in Omnibus, experimentalQueueSelector in Helm charts).
As announced in the 13.6 release post, the 'experimental' prefix is no longer supported. Instead, queue_selector for Omnibus and queueSelector in Helm charts should be used.
WARNING: This is a breaking change. Review the details carefully before upgrading.
For self-managed instances using the experimental external pipeline validation service, the range of error codes GitLab accepts will be reduced. Currently, pipelines are invalidated when the validation service returns a response code from 400 to 499. In GitLab 14.0 and later, pipelines will be invalidated for the 406: Not Accepted response code only.
WARNING: This is a breaking change. Review the details carefully before upgrading.
As announced in GitLab 13.3, the following configuration settings in /etc/gitlab/gitlab.rb have been removed in 14.0:
geo_secondary['db_fdw']geo_postgresql['fdw_external_user']geo_postgresql['fdw_external_password']gitlab-_rails['geo_migrated_local_files_clean_up_worker_cron']
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab is deprecating the OAuth 2 implicit grant flow as it has been removed for OAuth 2.1.
Migrate your existing applications to other supported OAuth2 flows.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In 14.0, we are now pulling the GitLab Runner helper image from the GitLab Container Registry instead of Docker Hub. Refer to issue #27218 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab Runner 14.0, the installation process will ignore the skel directory by default when creating the user home directory. Refer to issue #4845 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Now that Praefect supports a primary election strategy for each repository, we have removed the sql election strategy.
The per_repository election strategy is the new default, which is automatically used if no election strategy was specified.
If you had configured the sql election strategy, you must follow the migration instructions before upgrading to 14.0.
WARNING: This is a breaking change. Review the details carefully before upgrading.
With the maturity of GitLab Secure scanning tools, we've needed to add more granularity to our release process. Previously, GitLab shared a major version number for all analyzers and tools. This requires all tools to share a major version, and prevents the use of semantic version numbering. In GitLab 14.0, SAST removes the SAST_ANALYZER_IMAGE_TAG global variable in our managed SAST.gitlab-ci.yml CI template, in favor of the analyzer job variable setting the major.minor tag in the SAST vendored template.
Each analyzer job now has a scoped SAST_ANALYZER_IMAGE_TAG variable, which will be actively managed by GitLab and set to the major tag for the respective analyzer. To pin to a specific version, change the variable value to the specific version tag.
If you override or maintain custom versions of SAST.gitlab-ci.yml, update your CI templates to stop referencing the global SAST_ANALYZER_IMAGE_TAG, and move it to a scoped analyzer job tag. We strongly encourage inheriting and overriding our managed CI templates to future-proof your CI templates. This change allows you to more granularly control future analyzer updates with a pinned major.minor version.
This deprecation and removal changes our previously announced plan to pin the Static Analysis tools.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Our CI/CD templates have been updated to no longer use hard-coded references to a master branch. In 14.0, they all use a variable that points to your project's configured default branch instead. If your CI/CD pipeline relies on our built-in templates, verify that this change works with your current configuration. For example, if you have a master branch and a different default branch, the updates to the templates may cause changes to your pipeline behavior. For more information, read the issue.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Helm v2 was officially deprecated in November of 2020, with the stable repository being de-listed from the Helm Hub shortly thereafter. With the release of GitLab 14.0, which will include the 5.0 release of the GitLab Helm chart, Helm v2 will no longer be supported.
Users of the chart should upgrade to Helm v3 to deploy GitLab 14.0 and later.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The legacy method of DAST Domain Validation for CI/CD scans was deprecated in GitLab 13.8, and is removed in GitLab 14.0. This method of domain validation only disallows scans if the DAST_FULL_SCAN_DOMAIN_VALIDATION_REQUIRED environment variable is set to true in the gitlab-ci.yml file, and a Gitlab-DAST-Permission header on the site is not set to allow. This two-step method required users to opt in to using the variable before they could opt out from using the header.
For more information, see the removal issue.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Legacy feature flags became read-only in GitLab 13.4. GitLab 14.0 removes support for legacy feature flags, so you must migrate them to the new version. You can do this by first taking a note (screenshot) of the legacy flag, then deleting the flag through the API or UI (you don't need to alter the code), and finally create a new Feature Flag with the same name as the legacy flag you deleted. Also, make sure the strategies and environments match the deleted flag. We created a video tutorial to help with this migration.
WARNING: This is a breaking change. Review the details carefully before upgrading.
As a part of the migration to a common report format for all of the Secure scanners in GitLab, DAST is making changes to the DAST JSON report. Certain legacy fields were deprecated in 13.8 and have been completely removed in 14.0. These fields are @generated, @version, site, and spider. This should not affect any normal DAST operation, but does affect users who consume the JSON report in an automated way and use these fields. Anyone affected by these changes, and needs these fields for business reasons, is encouraged to open a new GitLab issue and explain the need.
For more information, see the removal issue.
WARNING: This is a breaking change. Review the details carefully before upgrading.
As announced in GitLab 13.0, legacy storage has been removed in GitLab 14.0.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In 13.0, we deprecated the License-Management CI template and renamed it License-Scanning. We have been providing backward compatibility by warning users of the old template to switch. Now in 14.0, we are completely removing the License-Management CI template. Read about it in issue #216261 or this blog post.
WARNING: This is a breaking change. Review the details carefully before upgrading.
To improve performance, we are limiting the number of projects returned from the GET /groups/:id/ API call to 100. A complete list of projects can still be retrieved with the GET /groups/:id/projects API call.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab Runner 13.2, PowerShell Core support was added to the Shell executor. In 14.0, PowerShell Core, pwsh is now the default shell for newly-registered Windows runners. Windows CMD will still be available as a shell option for Windows runners. Refer to issue #26419 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Until GitLab 13.9, if you wanted to avoid running one particular GitLab SAST analyzer, you needed to remove it from the long string of analyzers in the SAST.gitlab-ci.yml file and use that to set the SAST_DEFAULT_ANALYZERS variable in your project's CI file. If you did this, it would exclude you from future new analyzers because this string hard codes the list of analyzers to execute. We avoid this problem by inverting this variable's logic to exclude, rather than choose default analyzers.
Beginning with 13.9, we migrated to SAST_EXCLUDED_ANALYZERS in our SAST.gitlab-ci.yml file. We encourage anyone who uses a customized SAST configuration in their project CI file to migrate to this new variable. If you have not overridden SAST_DEFAULT_ANALYZERS, no action is needed. The CI/CD variable SAST_DEFAULT_ANALYZERS has been removed in GitLab 14.0, which released on June 22, 2021.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab Runner 13.0, issue #5069, we introduced new timing options for the GitLab Docker Machine executor. In GitLab Runner 14.0, we have removed the old configuration option, off peak time mode.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Support for OpenSUSE Leap 15.1 is being deprecated. Support for 15.1 will be dropped in 14.0. We are now providing support for openSUSE Leap 15.2 packages.
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab 14.0 requires PostgreSQL 12 or later. It offers significant improvements to indexing, partitioning, and general performance benefits.
Starting in GitLab 13.7, all new installations default to PostgreSQL version 12. From GitLab 13.8, single-node instances are automatically upgraded as well. If you aren't ready to upgrade, you can opt out of automatic upgrades.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The deployment frequency project-level API endpoint has been deprecated in favor of the DORA 4 API, which consolidates all the metrics under one API with the specific metric as a required field. As a result, the timestamp field, which doesn't allow adding future extensions and causes performance issues, will be removed. With the old API, an example response would be { "2021-03-01": 3, "date": "2021-03-01", "value": 3 }. The first key/value ("2021-03-01": 3) will be removed and replaced by the last two ("date": "2021-03-01", "value": 3).
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab 14.0 removes support for the release description in the Tags API. You can no longer add a release description when creating a new tag. You also can no longer create or update a release through the Tags API. Please migrate to use the Releases API instead.
WARNING: This is a breaking change. Review the details carefully before upgrading.
By default, the Ruby.gitlab-ci.yml file has included Ruby 2.5.
To better support the latest versions of Ruby, the template is changed to use ruby:latest, which is currently 3.0. To better understand the changes in Ruby 3.0, please reference the Ruby-lang.org release announcement.
Relevant Issue: Updates Ruby version 2.5 to 3.0
WARNING: This is a breaking change. Review the details carefully before upgrading.
With the release of SAST Custom Rulesets in GitLab 13.5 we allow greater flexibility in configuration options for our Go analyzer (GoSec). As a result we no longer plan to support our less flexible SAST_GOSEC_CONFIG analyzer setting. This variable was deprecated in GitLab 13.10.
GitLab 14.0 removes the old SAST_GOSEC_CONFIG variable. If you use or override SAST_GOSEC_CONFIG in your CI file, update your SAST CI configuration or pin to an older version of the GoSec analyzer. We strongly encourage inheriting and overriding our managed CI templates to future-proof your CI templates.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Service Templates are removed in GitLab 14.0. They were used to apply identical settings to a large number of projects, but they only did so at the time of project creation.
While they solved part of the problem, updating those values later proved to be a major pain point. Project Integration Management solves this problem by enabling you to create settings at the Group or Instance level, and projects within that namespace inheriting those settings.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab Runner 13.5, we introduced failed and success states for a job. To support Prometheus rules, we chose to convert success/failure to finished for the metric. In 14.0, the conversion has now been removed. Refer to issue #26900 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
As we continuously develop GitLab's Terraform integrations, to minimize customer disruption, we maintain two GitLab CI/CD templates for Terraform:
- The "latest version" template, which is updated frequently between minor releases of GitLab (such as 13.10, 13.11, etc).
- The "major version" template, which is updated only at major releases (such as 13.0, 14.0, etc).
At every major release of GitLab, the "latest version" template becomes the "major version" template, inheriting the "latest template" setup. As we have added many new features to the Terraform integration, the new setup for the "major version" template can be considered a breaking change.
The latest template supports the Terraform Merge Request widget and doesn't need additional setup to work with the GitLab managed Terraform state.
To check the new changes, see the new "major version" template.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Ubuntu 16.04 reached end-of-life in April 2021, and no longer receives maintenance updates. We strongly recommend users to upgrade to a newer release, such as 20.04.
GitLab 13.12 will be the last release with Ubuntu 16.04 support.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Ubuntu 19.10 (Eoan Ermine) reached end of life on Friday, July 17, 2020. In GitLab Runner 14.0, Ubuntu 19.10 (Eoan Ermine) is no longer available from our package distribution. Refer to issue #26036 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
Support for Unicorn has been removed in GitLab 14.0 in favor of Puma. Puma has a multi-threaded architecture which uses less memory than a multi-process application server like Unicorn. On GitLab.com, we saw a 40% reduction in memory consumption by using Puma.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The WIP (work in progress) status for merge requests signaled to reviewers that the merge request in question wasn't ready to merge. We've renamed the WIP feature to Draft, a more inclusive and self-explanatory term. Draft clearly communicates the merge request in question isn't ready for review, and makes no assumptions about the progress being made toward it. Draft also reduces the cognitive load for new users, non-English speakers, and anyone unfamiliar with the WIP acronym.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The Web Application Firewall (WAF) was deprecated in GitLab 13.6 and is removed from GitLab 14.0. The WAF had limitations inherent in the architectural design that made it difficult to meet the requirements traditionally expected of a WAF. By removing the WAF, GitLab is able to focus on improving other areas in the product where more value can be provided to users. Users who currently rely on the WAF can continue to use the free and open source ModSecurity project, which is independent from GitLab. Additional details are available in the deprecation issue.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In 14.0, we have removed Windows Server 1903. Microsoft ended support for this version on 2020-08-12. Refer to issue #27551 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In 14.0, we have removed Windows Server 1909. Microsoft ended support for this version on 2021-05-11. Refer to issue #27899 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab Runner 13.3, a symlink was added from /user/lib/gitlab-runner/gitlab-runner to /usr/bin/gitlab-runner. In 14.0, the symlink has been removed and the runner is now installed in /usr/bin/gitlab-runner. Refer to issue #26651 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
To create a consistent experience for users based on their preferences, support for toggling whitespace changes via URL parameter has been removed in GitLab 14.0.
WARNING: This is a breaking change. Review the details carefully before upgrading.
The CI_PROJECT_CONFIG_PATH predefined project variable
has been removed in favor of CI_CONFIG_PATH, which is functionally the same.
If you are using CI_PROJECT_CONFIG_PATH in your pipeline configurations,
please update them to use CI_CONFIG_PATH instead.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In 14.0, we have deactivated the FF_RESET_HELPER_IMAGE_ENTRYPOINT feature flag. Refer to issue #26679 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
In GitLab Runner 13.1, issue #3376, we introduced sigterm and then sigkill to a process in the Shell executor. We also introduced a new feature flag, FF_SHELL_EXECUTOR_USE_LEGACY_PROCESS_KILL, so you can use the previous process termination sequence. In GitLab Runner 14.0, issue #6413, the feature flag has been removed.
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab Runner 14.0 removes the FF_USE_GO_CLOUD_WITH_CACHE_ARCHIVER feature flag. Refer to issue #27175 for details.
WARNING: This is a breaking change. Review the details carefully before upgrading.
To ensure Secret Detection was scanning both default branches and feature branches, we introduced two separate secret detection CI jobs (secret_detection_default_branch and secret_detection) in our managed Secret-Detection.gitlab-ci.yml template. These two CI jobs created confusion and complexity in the CI rules logic. This deprecation moves the rule logic into the script section, which then determines how the secret_detection job is run (historic, on a branch, commits, etc).
If you override or maintain custom versions of SAST.gitlab-ci.yml or Secret-Detection.gitlab-ci.yml, you must update your CI templates. We strongly encourage inheriting and overriding our managed CI templates to future-proof your CI templates. GitLab 14.0 no longer supports the old secret_detection_default_branch job.
WARNING: This is a breaking change. Review the details carefully before upgrading.
GitLab Runner was updated in GitLab 13.4 to internally stop passing the trace parameter to the /api/jobs/:id endpoint. GitLab 14.0 deprecates the trace parameter entirely for all other requests of this endpoint. Make sure your GitLab Runner version matches your GitLab version to ensure consistent behavior.