diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 8f95ac529dd5..e537c2974a6a 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -34,9 +34,8 @@ * - Extra features * * Advanced settings can be found in Configuration_adv.h - * */ -#define CONFIGURATION_H_VERSION 020006 +#define CONFIGURATION_H_VERSION 020007 //=========================================================================== //============================= Getting Started ============================= @@ -389,6 +388,7 @@ * 21 : Pt100 with circuit in the Ultimainboard V2.x with 3.3v excitation (STM32 \ LPC176x....) * 22 : 100k (hotend) with 4.7k pullup to 3.3V and 220R to analog input (as in GTM32 Pro vB) * 23 : 100k (bed) with 4.7k pullup to 3.3v and 220R to analog input (as in GTM32 Pro vB) + * 30 : Kis3d Silicone heating mat 200W/300W with 6mm precision cast plate (EN AW 5083) NTC100K / B3950 (4.7k pullup) * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup @@ -847,7 +847,6 @@ * - For simple switches connect... * - normally-closed switches to GND and D32. * - normally-open switches to 5V and D32. - * */ //#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default @@ -1554,7 +1553,6 @@ * * Caveats: The ending Z should be the same as starting Z. * Attention: EXPERIMENTAL. G-code arguments may change. - * */ //#define NOZZLE_CLEAN_FEATURE @@ -1706,7 +1704,6 @@ * * SD Card support is disabled by default. If your controller has an SD slot, * you must uncomment the following option or it won't work. - * */ #define SDSUPPORT @@ -1943,6 +1940,14 @@ // //#define FF_INTERFACEBOARD +// +// TFT GLCD Panel with Marlin UI +// Panel connected to main board by SPI or I2C interface. +// See https://github.com/Serhiy-K/TFTGLCDAdapter +// +//#define TFTGLCD_PANEL_SPI +//#define TFTGLCD_PANEL_I2C + //============================================================================= //======================= LCD / Controller Selection ======================= //========================= (Graphical LCDs) ======================== @@ -2314,7 +2319,6 @@ * *** CAUTION *** * * LED Type. Enable only one of the following two options. - * */ //#define RGB_LED //#define RGBW_LED diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index e2a09df96991..a1ec7ebfb86f 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -29,9 +29,8 @@ * Some of these settings can damage your printer if improperly set! * * Basic settings can be found in Configuration.h - * */ -#define CONFIGURATION_ADV_H_VERSION 020006 +#define CONFIGURATION_ADV_H_VERSION 020007 // @section temperature @@ -1024,18 +1023,18 @@ #define BOOTSCREEN_TIMEOUT 4000 // (ms) Total Duration to display the boot screen(s) #endif -#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && (HAS_GRAPHICAL_LCD || HAS_CHARACTER_LCD) +#if EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) && ANY(HAS_MARLINUI_U8GLIB, HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) //#define SHOW_REMAINING_TIME // Display estimated time to completion #if ENABLED(SHOW_REMAINING_TIME) //#define USE_M73_REMAINING_TIME // Use remaining time from M73 command instead of estimation //#define ROTATE_PROGRESS_DISPLAY // Display (P)rogress, (E)lapsed, and (R)emaining time #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits #endif - #if HAS_CHARACTER_LCD + #if EITHER(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing #if ENABLED(LCD_PROGRESS_BAR) #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar @@ -1086,6 +1085,7 @@ #if ENABLED(POWER_LOSS_RECOVERY) #define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500) //#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss + //#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled! //#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS) //#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module. //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss @@ -1246,7 +1246,7 @@ * controller events, as there is a trade-off between reliable * printing performance versus fast display updates. */ -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB // Show SD percentage next to the progress bar //#define DOGM_SD_PERCENT @@ -1316,7 +1316,7 @@ //#define MARLIN_SNAKE //#define GAMES_EASTER_EGG // Add extra blank lines above the "Games" sub-menu -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB // // Additional options for DGUS / DWIN displays @@ -1864,7 +1864,6 @@ * Be sure to turn off auto-retract during filament change. * * Note that M207 / M208 / M209 settings are saved to EEPROM. - * */ //#define FWRETRACT #if ENABLED(FWRETRACT) diff --git a/Marlin/src/HAL/AVR/HAL.h b/Marlin/src/HAL/AVR/HAL.h index 41f1acd32f68..b606d0c231b4 100644 --- a/Marlin/src/HAL/AVR/HAL.h +++ b/Marlin/src/HAL/AVR/HAL.h @@ -15,6 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #pragma once diff --git a/Marlin/src/HAL/AVR/Servo.cpp b/Marlin/src/HAL/AVR/Servo.cpp index 66ed993c6f18..526352b77339 100644 --- a/Marlin/src/HAL/AVR/Servo.cpp +++ b/Marlin/src/HAL/AVR/Servo.cpp @@ -48,7 +48,6 @@ * readMicroseconds() - Get the last-written servo pulse width in microseconds. * attached() - Return true if a servo is attached. * detach() - Stop an attached servo from pulsing its i/o pin. - * */ #ifdef __AVR__ diff --git a/Marlin/src/HAL/AVR/pinsDebug.h b/Marlin/src/HAL/AVR/pinsDebug.h index 2cf740a5597a..dac6b1b150bd 100644 --- a/Marlin/src/HAL/AVR/pinsDebug.h +++ b/Marlin/src/HAL/AVR/pinsDebug.h @@ -26,7 +26,7 @@ #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS -#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H) +#if MB(BQ_ZUM_MEGA_3D, MIGHTYBOARD_REVE, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14) #define AVR_ATmega2560_FAMILY_PLUS_70 1 #endif diff --git a/Marlin/src/HAL/AVR/pinsDebug_plus_70.h b/Marlin/src/HAL/AVR/pinsDebug_plus_70.h index 46c03088d213..db3fdf1f767b 100644 --- a/Marlin/src/HAL/AVR/pinsDebug_plus_70.h +++ b/Marlin/src/HAL/AVR/pinsDebug_plus_70.h @@ -22,15 +22,12 @@ * Structures for 2560 family boards that use more than 70 pins */ -#undef NUM_DIGITAL_PINS -#if MB(BQ_ZUM_MEGA_3D) +#if MB(BQ_ZUM_MEGA_3D, MINIRAMBO, SCOOVO_X9H, TRIGORILLA_14) + #undef NUM_DIGITAL_PINS #define NUM_DIGITAL_PINS 85 #elif MB(MIGHTYBOARD_REVE) + #undef NUM_DIGITAL_PINS #define NUM_DIGITAL_PINS 80 -#elif MB(MINIRAMBO) - #define NUM_DIGITAL_PINS 85 -#elif MB(SCOOVO_X9H) - #define NUM_DIGITAL_PINS 85 #endif #define PA 1 diff --git a/Marlin/src/HAL/AVR/timers.h b/Marlin/src/HAL/AVR/timers.h index 6c40d3220924..82eb8b14b161 100644 --- a/Marlin/src/HAL/AVR/timers.h +++ b/Marlin/src/HAL/AVR/timers.h @@ -15,6 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #pragma once diff --git a/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp b/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp index c29b19557899..cb95a48cccec 100644 --- a/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp +++ b/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp @@ -57,7 +57,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "../shared/Marduino.h" #include "../shared/Delay.h" @@ -189,5 +189,5 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/HAL.cpp b/Marlin/src/HAL/DUE/HAL.cpp index 4b9260c35962..6ce85a4643bb 100644 --- a/Marlin/src/HAL/DUE/HAL.cpp +++ b/Marlin/src/HAL/DUE/HAL.cpp @@ -19,9 +19,7 @@ */ /** - * Description: HAL for Arduino Due and compatible (SAM3X8E) - * - * For ARDUINO_ARCH_SAM + * HAL for Arduino Due and compatible (SAM3X8E) */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/HAL.h b/Marlin/src/HAL/DUE/HAL.h index 7a057fdae4fc..dbb84e2ac717 100644 --- a/Marlin/src/HAL/DUE/HAL.h +++ b/Marlin/src/HAL/DUE/HAL.h @@ -22,9 +22,7 @@ #pragma once /** - * Description: HAL for Arduino Due and compatible (SAM3X8E) - * - * For ARDUINO_ARCH_SAM + * HAL for Arduino Due and compatible (SAM3X8E) */ #define CPU_32_BIT diff --git a/Marlin/src/HAL/DUE/HAL_SPI.cpp b/Marlin/src/HAL/DUE/HAL_SPI.cpp index 97d69f0d726b..0451d8bcc4ff 100644 --- a/Marlin/src/HAL/DUE/HAL_SPI.cpp +++ b/Marlin/src/HAL/DUE/HAL_SPI.cpp @@ -30,7 +30,7 @@ */ /** - * Description: HAL for Arduino Due and compatible (SAM3X8E) + * HAL for Arduino Due and compatible (SAM3X8E) * * For ARDUINO_ARCH_SAM */ @@ -759,7 +759,6 @@ * * All of the above can be avoided by defining FORCE_SOFT_SPI to force the * display to use software SPI. - * */ void spiInit(uint8_t spiRate=6) { // Default to slowest rate if not specified) diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp index 28e82d70d454..be4b49c0f992 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp @@ -52,14 +52,13 @@ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * */ #ifdef __SAM3X8E__ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include @@ -145,6 +144,6 @@ uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_va return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // __SAM3X8E__ diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp index 54c244d4f615..ea7204fa366b 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920) +#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920) #undef SPI_SPEED #define SPI_SPEED 2 // About 2 MHz @@ -144,5 +144,5 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void return 1; } -#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920 +#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920 #endif // ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp index 960df1bd864b..615a386c3542 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "../../shared/Delay.h" @@ -108,5 +108,5 @@ void u8g_spiSend_sw_DUE_mode_3(uint8_t val) { // 3.5MHz } } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/eeprom_flash.cpp b/Marlin/src/HAL/DUE/eeprom_flash.cpp index d98f06039f51..67f1f9e40f46 100644 --- a/Marlin/src/HAL/DUE/eeprom_flash.cpp +++ b/Marlin/src/HAL/DUE/eeprom_flash.cpp @@ -53,7 +53,6 @@ * per page. We can't emulate EE endurance with FLASH for all * bytes, but we can emulate endurance for a given percent of * bytes. - * */ //#define EE_EMU_DEBUG diff --git a/Marlin/src/HAL/DUE/pinsDebug.h b/Marlin/src/HAL/DUE/pinsDebug.h index 28687ff267c4..a99ca8ecce90 100644 --- a/Marlin/src/HAL/DUE/pinsDebug.h +++ b/Marlin/src/HAL/DUE/pinsDebug.h @@ -179,5 +179,4 @@ void pwm_details(int32_t pin) { * ----------------+-------- * ID | PB11 * VBOF | PB10 - * */ diff --git a/Marlin/src/HAL/DUE/timers.cpp b/Marlin/src/HAL/DUE/timers.cpp index 795cdad66a57..9b937d1a7c83 100644 --- a/Marlin/src/HAL/DUE/timers.cpp +++ b/Marlin/src/HAL/DUE/timers.cpp @@ -21,9 +21,7 @@ */ /** - * Description: HAL for Arduino Due and compatible (SAM3X8E) - * - * For ARDUINO_ARCH_SAM + * HAL Timers for Arduino Due and compatible (SAM3X8E) */ #ifdef ARDUINO_ARCH_SAM diff --git a/Marlin/src/HAL/DUE/timers.h b/Marlin/src/HAL/DUE/timers.h index 9defe39a0ae3..0e1ea07cc2e4 100644 --- a/Marlin/src/HAL/DUE/timers.h +++ b/Marlin/src/HAL/DUE/timers.h @@ -21,9 +21,7 @@ #pragma once /** - * HAL for Arduino Due and compatible (SAM3X8E) - * - * For ARDUINO_ARCH_SAM + * HAL Timers for Arduino Due and compatible (SAM3X8E) */ #include diff --git a/Marlin/src/HAL/DUE/upload_extra_script.py b/Marlin/src/HAL/DUE/upload_extra_script.py index 06c2b914f53d..d52a0a3642b4 100644 --- a/Marlin/src/HAL/DUE/upload_extra_script.py +++ b/Marlin/src/HAL/DUE/upload_extra_script.py @@ -14,5 +14,5 @@ # Use bossac.exe on Windows env.Replace( - UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot" + UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot $SOURCE" ) diff --git a/Marlin/src/HAL/ESP32/HAL.h b/Marlin/src/HAL/ESP32/HAL.h index 5eb84fdc3021..aa3bcc775d1f 100644 --- a/Marlin/src/HAL/ESP32/HAL.h +++ b/Marlin/src/HAL/ESP32/HAL.h @@ -15,11 +15,12 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #pragma once /** - * Description: HAL for Espressif ESP32 WiFi + * HAL for Espressif ESP32 WiFi */ #define CPU_32_BIT diff --git a/Marlin/src/HAL/ESP32/ota.h b/Marlin/src/HAL/ESP32/ota.h index 7f9b237aa6e1..546ace82dbb8 100644 --- a/Marlin/src/HAL/ESP32/ota.h +++ b/Marlin/src/HAL/ESP32/ota.h @@ -15,6 +15,7 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #pragma once diff --git a/Marlin/src/HAL/LINUX/include/serial.h b/Marlin/src/HAL/LINUX/include/serial.h index 94e0c758ee12..e91624938978 100644 --- a/Marlin/src/HAL/LINUX/include/serial.h +++ b/Marlin/src/HAL/LINUX/include/serial.h @@ -33,7 +33,6 @@ * Generic RingBuffer * T type of the buffer array * S size of the buffer (must be power of 2) - * */ template class RingBuffer { public: diff --git a/Marlin/src/HAL/LINUX/servo_private.h b/Marlin/src/HAL/LINUX/servo_private.h index 122cfef3ea21..bcc8d2037f90 100644 --- a/Marlin/src/HAL/LINUX/servo_private.h +++ b/Marlin/src/HAL/LINUX/servo_private.h @@ -45,7 +45,6 @@ * Version 2 Copyright (c) 2009 Michael Margolis. All right reserved. * * The only modification was to update/delete macros to match the LPC176x. - * */ #include diff --git a/Marlin/src/HAL/LINUX/spi_pins.h b/Marlin/src/HAL/LINUX/spi_pins.h index a444196f04bb..01ba28e5b604 100644 --- a/Marlin/src/HAL/LINUX/spi_pins.h +++ b/Marlin/src/HAL/LINUX/spi_pins.h @@ -24,7 +24,7 @@ #include "../../core/macros.h" #include "../../inc/MarlinConfigPre.h" -#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) +#if BOTH(HAS_MARLINUI_U8GLIB, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) #define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently // needed due to the speed and mode required for communicating with each device being different. // This requirement can be removed if the SPI access to these devices is updated to use diff --git a/Marlin/src/HAL/LPC1768/Servo.h b/Marlin/src/HAL/LPC1768/Servo.h index e953cb920475..eb12fd20f4d8 100644 --- a/Marlin/src/HAL/LPC1768/Servo.h +++ b/Marlin/src/HAL/LPC1768/Servo.h @@ -46,7 +46,6 @@ * Version 2 Copyright (c) 2009 Michael Margolis. All right reserved. * * The only modification was to update/delete macros to match the LPC176x. - * */ #include diff --git a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h index b6491368cd2a..fd82e2884ae9 100644 --- a/Marlin/src/HAL/LPC1768/inc/SanityCheck.h +++ b/Marlin/src/HAL/LPC1768/inc/SanityCheck.h @@ -113,7 +113,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o #define _IS_RX1_1 IS_RX1 #if IS_TX1(TMC_SW_SCK) #error "Serial port pins (1) conflict with other pins!" - #elif HAS_SPI_LCD + #elif HAS_WIRED_LCD #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1) #error "Serial port pins (1) conflict with Encoder Buttons!" #elif ANY_TX(1, SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK) \ diff --git a/Marlin/src/HAL/LPC1768/spi_pins.h b/Marlin/src/HAL/LPC1768/spi_pins.h index 2e6749bf5752..b4da5d4df234 100644 --- a/Marlin/src/HAL/LPC1768/spi_pins.h +++ b/Marlin/src/HAL/LPC1768/spi_pins.h @@ -23,7 +23,7 @@ #include "../../core/macros.h" -#if BOTH(SDSUPPORT, HAS_GRAPHICAL_LCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) +#if BOTH(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN) #define LPC_SOFTWARE_SPI // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently // needed due to the speed and mode required for communicating with each device being different. // This requirement can be removed if the SPI access to these devices is updated to use diff --git a/Marlin/src/HAL/LPC1768/timers.h b/Marlin/src/HAL/LPC1768/timers.h index 23dc20e2eb4e..e6744fb005bf 100644 --- a/Marlin/src/HAL/LPC1768/timers.h +++ b/Marlin/src/HAL/LPC1768/timers.h @@ -21,7 +21,6 @@ #pragma once /** - * * HAL For LPC1768 */ diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp index befc348fab49..057e10e0f545 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include #include "../../shared/HAL_SPI.h" @@ -124,6 +124,6 @@ uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp index f03be9ab34dc..6f7efba4ae20 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp @@ -77,7 +77,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include @@ -193,6 +193,6 @@ uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_v return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp index 1500c22a0d52..592e27f6c006 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include #include "../../shared/HAL_SPI.h" @@ -133,6 +133,6 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp index 4f52f7dd0129..ca9d6ecfbe25 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp @@ -57,7 +57,7 @@ #include "../../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD && DISABLED(U8GLIB_ST7920) +#if HAS_MARLINUI_U8GLIB && DISABLED(U8GLIB_ST7920) #include @@ -203,5 +203,5 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, return 1; } -#endif // HAS_GRAPHICAL_LCD && !U8GLIB_ST7920 +#endif // HAS_MARLINUI_U8GLIB && !U8GLIB_ST7920 #endif // TARGET_LPC1768 diff --git a/Marlin/src/HAL/SAMD51/QSPIFlash.h b/Marlin/src/HAL/SAMD51/QSPIFlash.h index b6f22769ff60..db4abec91caf 100644 --- a/Marlin/src/HAL/SAMD51/QSPIFlash.h +++ b/Marlin/src/HAL/SAMD51/QSPIFlash.h @@ -24,7 +24,6 @@ * THE SOFTWARE. * * Derived from Adafruit_SPIFlash class with no SdFat references - * */ #pragma once diff --git a/Marlin/src/HAL/SAMD51/pinsDebug.h b/Marlin/src/HAL/SAMD51/pinsDebug.h index c28937d6c6d6..81376db79add 100644 --- a/Marlin/src/HAL/SAMD51/pinsDebug.h +++ b/Marlin/src/HAL/SAMD51/pinsDebug.h @@ -150,5 +150,4 @@ void pwm_details(int32_t pin) { * 93 | PA10 | QSPI: IO2 * 94 | PA11 | QSPI: IO3 * 95 | PB31 | SD: DETECT - * */ diff --git a/Marlin/src/HAL/STM32/HAL.cpp b/Marlin/src/HAL/STM32/HAL.cpp index b1b727ce195b..83604b1104bb 100644 --- a/Marlin/src/HAL/STM32/HAL.cpp +++ b/Marlin/src/HAL/STM32/HAL.cpp @@ -63,7 +63,7 @@ uint16_t HAL_adc_result; void HAL_init() { FastIO_init(); - #if ENABLED(SDSUPPORT) && DISABLED(SDIO_SUPPORT) + #if ENABLED(SDSUPPORT) && DISABLED(SDIO_SUPPORT) && (defined(SDSS) && SDSS != -1) OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up #endif @@ -122,9 +122,14 @@ extern "C" { // TODO: Make sure this doesn't cause any delay void HAL_adc_start_conversion(const uint8_t adc_pin) { HAL_adc_result = analogRead(adc_pin); } - uint16_t HAL_adc_get_result() { return HAL_adc_result; } +// Reset the system (to initiate a firmware flash) void flashFirmware(const int16_t) { NVIC_SystemReset(); } +// Maple Compatibility +systickCallback_t systick_user_callback; +void systick_attach_callback(systickCallback_t cb) { systick_user_callback = cb; } +void HAL_SYSTICK_Callback() { if (systick_user_callback) systick_user_callback(); } + #endif // ARDUINO_ARCH_STM32 && !STM32GENERIC diff --git a/Marlin/src/HAL/STM32/HAL.h b/Marlin/src/HAL/STM32/HAL.h index 60ab45374a56..37919102ec1f 100644 --- a/Marlin/src/HAL/STM32/HAL.h +++ b/Marlin/src/HAL/STM32/HAL.h @@ -177,3 +177,8 @@ uint16_t HAL_adc_get_result(); #define PLATFORM_M997_SUPPORT void flashFirmware(const int16_t); + +// Maple Compatibility +typedef void (*systickCallback_t)(void); +void systick_attach_callback(systickCallback_t cb); +void HAL_SYSTICK_Callback(); diff --git a/Marlin/src/HAL/STM32/HAL_SPI.cpp b/Marlin/src/HAL/STM32/HAL_SPI.cpp index 202442a71b00..f947e6ef3272 100644 --- a/Marlin/src/HAL/STM32/HAL_SPI.cpp +++ b/Marlin/src/HAL/STM32/HAL_SPI.cpp @@ -132,11 +132,9 @@ static SPISettings spiConfig; * @details Only configures SS pin since stm32duino creates and initialize the SPI object */ void spiBegin() { - #if !PIN_EXISTS(SS) - #error "SS_PIN not defined!" + #if PIN_EXISTS(SS) + OUT_WRITE(SS_PIN, HIGH); #endif - - OUT_WRITE(SS_PIN, HIGH); } // Configure SPI for specified SPI speed @@ -173,9 +171,7 @@ static SPISettings spiConfig; * @details */ uint8_t spiRec() { - SPI.beginTransaction(spiConfig); uint8_t returnByte = SPI.transfer(0xFF); - SPI.endTransaction(); return returnByte; } @@ -191,9 +187,7 @@ static SPISettings spiConfig; void spiRead(uint8_t* buf, uint16_t nbyte) { if (nbyte == 0) return; memset(buf, 0xFF, nbyte); - SPI.beginTransaction(spiConfig); SPI.transfer(buf, nbyte); - SPI.endTransaction(); } /** @@ -204,9 +198,7 @@ static SPISettings spiConfig; * @details */ void spiSend(uint8_t b) { - SPI.beginTransaction(spiConfig); SPI.transfer(b); - SPI.endTransaction(); } /** @@ -219,10 +211,8 @@ static SPISettings spiConfig; */ void spiSendBlock(uint8_t token, const uint8_t* buf) { uint8_t rxBuf[512]; - SPI.beginTransaction(spiConfig); SPI.transfer(token); SPI.transfer((uint8_t*)buf, &rxBuf, 512); - SPI.endTransaction(); } #endif // SOFTWARE_SPI diff --git a/Marlin/src/HAL/STM32F1/HAL.cpp b/Marlin/src/HAL/STM32F1/HAL.cpp index d7f9264be6c9..5920334bb101 100644 --- a/Marlin/src/HAL/STM32F1/HAL.cpp +++ b/Marlin/src/HAL/STM32F1/HAL.cpp @@ -97,6 +97,9 @@ const uint8_t adc_pins[] = { #if HAS_TEMP_ADC_0 TEMP_0_PIN, #endif + #if HAS_TEMP_ADC_PROBE + TEMP_PROBE_PIN, + #endif #if HAS_HEATED_BED TEMP_BED_PIN, #endif @@ -151,6 +154,9 @@ enum TempPinIndex : char { #if HAS_TEMP_ADC_0 TEMP_0, #endif + #if HAS_TEMP_ADC_PROBE + TEMP_PROBE, + #endif #if HAS_HEATED_BED TEMP_BED, #endif @@ -341,6 +347,9 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) { #if HAS_TEMP_ADC_0 case TEMP_0_PIN: pin_index = TEMP_0; break; #endif + #if HAS_TEMP_ADC_PROBE + case TEMP_PROBE_PIN: pin_index = TEMP_PROBE; break; + #endif #if HAS_HEATED_BED case TEMP_BED_PIN: pin_index = TEMP_BED; break; #endif diff --git a/Marlin/src/HAL/STM32F1/HAL_SPI.cpp b/Marlin/src/HAL/STM32F1/HAL_SPI.cpp index 4d72473e7f8e..550a79deaec5 100644 --- a/Marlin/src/HAL/STM32F1/HAL_SPI.cpp +++ b/Marlin/src/HAL/STM32F1/HAL_SPI.cpp @@ -24,9 +24,6 @@ /** * Software SPI functions originally from Arduino Sd2Card Library * Copyright (c) 2009 by William Greiman - */ - -/** * Adapted to the STM32F1 HAL */ diff --git a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp index 894abb882a64..f88fa8850788 100644 --- a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp +++ b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp @@ -20,7 +20,7 @@ #include "../../../inc/MarlinConfig.h" -#if BOTH(HAS_GRAPHICAL_LCD, FORCE_SOFT_SPI) +#if BOTH(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI) #include "../HAL.h" #include @@ -161,5 +161,5 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // STM32F1 diff --git a/Marlin/src/HAL/STM32F1/eeprom_bl24cxx.cpp b/Marlin/src/HAL/STM32F1/eeprom_bl24cxx.cpp index f77306a88a17..658b7cd4a654 100644 --- a/Marlin/src/HAL/STM32F1/eeprom_bl24cxx.cpp +++ b/Marlin/src/HAL/STM32F1/eeprom_bl24cxx.cpp @@ -25,6 +25,8 @@ * with simple implementations supplied by Marlin. */ +#ifdef __STM32F1__ + #include "../../inc/MarlinConfig.h" #if ENABLED(IIC_BL24CXX_EEPROM) @@ -79,3 +81,4 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t } #endif // IIC_BL24CXX_EEPROM +#endif // __STM32F1__ diff --git a/Marlin/src/HAL/STM32F1/eeprom_if_iic.cpp b/Marlin/src/HAL/STM32F1/eeprom_if_iic.cpp index 33dd277addbe..ccc3fc537f1a 100644 --- a/Marlin/src/HAL/STM32F1/eeprom_if_iic.cpp +++ b/Marlin/src/HAL/STM32F1/eeprom_if_iic.cpp @@ -25,6 +25,8 @@ * Enable USE_SHARED_EEPROM if not supplied by the framework. */ +#ifdef __STM32F1__ + #include "../../inc/MarlinConfig.h" #if ENABLED(IIC_BL24CXX_EEPROM) @@ -49,3 +51,4 @@ uint8_t eeprom_read_byte(uint8_t *pos) { } #endif // IIC_BL24CXX_EEPROM +#endif // __STM32F1__ diff --git a/Marlin/src/HAL/STM32F1/eeprom_wired.cpp b/Marlin/src/HAL/STM32F1/eeprom_wired.cpp index b4699d00dcc0..fffd6ccaf01e 100644 --- a/Marlin/src/HAL/STM32F1/eeprom_wired.cpp +++ b/Marlin/src/HAL/STM32F1/eeprom_wired.cpp @@ -17,17 +17,17 @@ * along with this program. If not, see . * */ + +/** + * HAL PersistentStore for STM32F1 + */ + #ifdef __STM32F1__ #include "../../inc/MarlinConfig.h" #if USE_WIRED_EEPROM -/** - * PersistentStore for Arduino-style EEPROM interface - * with simple implementations supplied by Marlin. - */ - #include "../shared/eeprom_if.h" #include "../shared/eeprom_api.h" diff --git a/Marlin/src/HAL/STM32F1/msc_sd.cpp b/Marlin/src/HAL/STM32F1/msc_sd.cpp index 6a4652e467fb..4f44f2ee905f 100644 --- a/Marlin/src/HAL/STM32F1/msc_sd.cpp +++ b/Marlin/src/HAL/STM32F1/msc_sd.cpp @@ -13,7 +13,7 @@ * along with this program. If not, see . * */ -#ifdef USE_USB_COMPOSITE +#if defined(__STM32F1__) && defined(USE_USB_COMPOSITE) #include "msc_sd.h" #include "SPI.h" @@ -77,4 +77,4 @@ void MSC_SD_init() { #endif } -#endif // USE_USB_COMPOSITE +#endif // __STM32F1__ && USE_USB_COMPOSITE diff --git a/Marlin/src/HAL/STM32F1/onboard_sd.cpp b/Marlin/src/HAL/STM32F1/onboard_sd.cpp index 0440db9438a4..9c2b128ddc9a 100644 --- a/Marlin/src/HAL/STM32F1/onboard_sd.cpp +++ b/Marlin/src/HAL/STM32F1/onboard_sd.cpp @@ -9,9 +9,10 @@ * No restriction on use. You can use, modify and redistribute it for * personal, non-profit or commercial products UNDER YOUR RESPONSIBILITY. * Redistributions of source code must retain the above copyright notice. - * */ +#ifdef __STM32F1__ + #include "../../inc/MarlinConfig.h" #if SD_CONNECTION_IS(ONBOARD) @@ -554,3 +555,4 @@ DRESULT disk_read ( #endif // _DISKIO_IOCTL #endif // SD_CONNECTION_IS(ONBOARD) +#endif // __STM32F1__ diff --git a/Marlin/src/HAL/STM32F1/tft/tft_fsmc.cpp b/Marlin/src/HAL/STM32F1/tft/tft_fsmc.cpp index 069be7ad54e3..008301d9bc0c 100644 --- a/Marlin/src/HAL/STM32F1/tft/tft_fsmc.cpp +++ b/Marlin/src/HAL/STM32F1/tft/tft_fsmc.cpp @@ -89,6 +89,16 @@ void TFT_FSMC::Init() { uint8_t cs = FSMC_CS_PIN, rs = FSMC_RS_PIN; uint32_t controllerAddress; + #if PIN_EXISTS(TFT_BACKLIGHT) + OUT_WRITE(TFT_BACKLIGHT_PIN, DISABLED(DELAYED_BACKLIGHT_INIT)); + #endif + + #if ENABLED(LCD_USE_DMA_FSMC) + dma_init(FSMC_DMA_DEV); + dma_disable(FSMC_DMA_DEV, FSMC_DMA_CHANNEL); + dma_set_priority(FSMC_DMA_DEV, FSMC_DMA_CHANNEL, DMA_PRIORITY_MEDIUM); + #endif + #if PIN_EXISTS(TFT_RESET) OUT_WRITE(TFT_RESET_PIN, HIGH); delay(100); diff --git a/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp b/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp index 4d116f440b8e..df3d40f159a7 100644 --- a/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp +++ b/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.cpp @@ -22,7 +22,6 @@ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. - * */ #if defined(STM32GENERIC) && defined(STM32F7) @@ -662,7 +661,6 @@ boolean TMC26XStepper::isEnabled() { return !!(chopper_config_register & T_OFF_P /** * reads a value from the TMC26X status register. The value is not obtained directly but can then * be read by the various status routines. - * */ void TMC26XStepper::readStatus(char read_value) { uint32_t old_driver_configuration_register_value = driver_configuration_register_value; diff --git a/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h b/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h index f1d0133a3b14..208c3bc7e062 100644 --- a/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h +++ b/Marlin/src/HAL/STM32_F4_F7/STM32F7/TMC2660.h @@ -22,7 +22,6 @@ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN * THE SOFTWARE. - * */ #pragma once diff --git a/Marlin/src/HAL/TEENSY31_32/HAL.cpp b/Marlin/src/HAL/TEENSY31_32/HAL.cpp index d276a4c88084..8c3dd8337740 100644 --- a/Marlin/src/HAL/TEENSY31_32/HAL.cpp +++ b/Marlin/src/HAL/TEENSY31_32/HAL.cpp @@ -20,9 +20,8 @@ * */ - /** - * Description: HAL for Teensy32 (MK20DX256) + * HAL for Teensy 3.2 (MK20DX256) */ #ifdef __MK20DX256__ diff --git a/Marlin/src/HAL/TEENSY31_32/HAL.h b/Marlin/src/HAL/TEENSY31_32/HAL.h index 31ceb8b87c9a..b434b9de7643 100644 --- a/Marlin/src/HAL/TEENSY31_32/HAL.h +++ b/Marlin/src/HAL/TEENSY31_32/HAL.h @@ -22,7 +22,7 @@ #pragma once /** - * Description: HAL for Teensy 3.5 and Teensy 3.6 + * HAL for Teensy 3.2 (MK20DX256) */ #define CPU_32_BIT @@ -44,8 +44,9 @@ //#undef MOTHERBOARD //#define MOTHERBOARD BOARD_TEENSY31_32 -#ifdef __MK20DX256__ - #define IS_32BIT_TEENSY 1 +#define IS_32BIT_TEENSY 1 +#define IS_TEENSY_31_32 1 +#ifndef IS_TEENSY31 #define IS_TEENSY32 1 #endif diff --git a/Marlin/src/HAL/TEENSY31_32/Servo.cpp b/Marlin/src/HAL/TEENSY31_32/Servo.cpp index 544892cb7de4..19d57cf1b375 100644 --- a/Marlin/src/HAL/TEENSY31_32/Servo.cpp +++ b/Marlin/src/HAL/TEENSY31_32/Servo.cpp @@ -51,5 +51,4 @@ void libServo::move(const int value) { } #endif // HAS_SERVOS - #endif // __MK20DX256__ diff --git a/Marlin/src/HAL/TEENSY31_32/eeprom.cpp b/Marlin/src/HAL/TEENSY31_32/eeprom.cpp index f66313225562..cc5c56f7d550 100644 --- a/Marlin/src/HAL/TEENSY31_32/eeprom.cpp +++ b/Marlin/src/HAL/TEENSY31_32/eeprom.cpp @@ -23,8 +23,7 @@ #if USE_WIRED_EEPROM /** - * PersistentStore for Arduino-style EEPROM interface - * with implementations supplied by the framework. + * HAL PersistentStore for Teensy 3.2 (MK20DX256) */ #include "../shared/eeprom_api.h" diff --git a/Marlin/src/HAL/TEENSY31_32/timers.cpp b/Marlin/src/HAL/TEENSY31_32/timers.cpp index bf756af8a128..7e01a38f8946 100644 --- a/Marlin/src/HAL/TEENSY31_32/timers.cpp +++ b/Marlin/src/HAL/TEENSY31_32/timers.cpp @@ -21,7 +21,7 @@ */ /** - * Teensy3.2 __MK20DX256__ + * HAL Timers for Teensy 3.2 (MK20DX256) */ #ifdef __MK20DX256__ diff --git a/Marlin/src/HAL/TEENSY31_32/timers.h b/Marlin/src/HAL/TEENSY31_32/timers.h index 4f004ef75191..135b32883084 100644 --- a/Marlin/src/HAL/TEENSY31_32/timers.h +++ b/Marlin/src/HAL/TEENSY31_32/timers.h @@ -22,8 +22,7 @@ #pragma once /** - * Description: HAL for - * Teensy3.2 (__MK20DX256__) + * HAL Timers for Teensy 3.2 (MK20DX256) */ #include diff --git a/Marlin/src/HAL/TEENSY35_36/HAL.cpp b/Marlin/src/HAL/TEENSY35_36/HAL.cpp index bcbee1d4c5ff..92907353b833 100644 --- a/Marlin/src/HAL/TEENSY35_36/HAL.cpp +++ b/Marlin/src/HAL/TEENSY35_36/HAL.cpp @@ -21,7 +21,7 @@ */ /** - * Description: HAL for Teensy35 (MK64FX512) + * HAL for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) */ #if defined(__MK64FX512__) || defined(__MK66FX1M0__) diff --git a/Marlin/src/HAL/TEENSY35_36/HAL.h b/Marlin/src/HAL/TEENSY35_36/HAL.h index 11f0fb941e93..f454e7af5121 100644 --- a/Marlin/src/HAL/TEENSY35_36/HAL.h +++ b/Marlin/src/HAL/TEENSY35_36/HAL.h @@ -22,7 +22,7 @@ #pragma once /** - * Description: HAL for Teensy 3.5 and Teensy 3.6 + * HAL for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) */ #define CPU_32_BIT @@ -45,13 +45,12 @@ // Defines // ------------------------ -#ifdef __MK64FX512__ - #define IS_32BIT_TEENSY 1 - #define IS_TEENSY35 1 -#endif +#define IS_32BIT_TEENSY 1 +#define IS_TEENSY_35_36 1 #ifdef __MK66FX1M0__ - #define IS_32BIT_TEENSY 1 #define IS_TEENSY36 1 +#else // __MK64FX512__ + #define IS_TEENSY35 1 #endif #define _MSERIAL(X) Serial##X diff --git a/Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp b/Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp index 812aa90c83b3..b36900a32195 100644 --- a/Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp +++ b/Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp @@ -19,6 +19,11 @@ * along with this program. If not, see . * */ + +/** + * HAL SPI for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) + */ + #if defined(__MK64FX512__) || defined(__MK66FX1M0__) #include "HAL.h" diff --git a/Marlin/src/HAL/TEENSY35_36/Servo.cpp b/Marlin/src/HAL/TEENSY35_36/Servo.cpp index d1390187a71e..033858594f6c 100644 --- a/Marlin/src/HAL/TEENSY35_36/Servo.cpp +++ b/Marlin/src/HAL/TEENSY35_36/Servo.cpp @@ -19,6 +19,11 @@ * along with this program. If not, see . * */ + +/** + * HAL Servo for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) + */ + #if defined(__MK64FX512__) || defined(__MK66FX1M0__) #include "../../inc/MarlinConfig.h" @@ -51,5 +56,4 @@ void libServo::move(const int value) { } #endif // HAS_SERVOS - #endif // __MK64FX512__ || __MK66FX1M0__ diff --git a/Marlin/src/HAL/TEENSY35_36/Servo.h b/Marlin/src/HAL/TEENSY35_36/Servo.h index ae904f0e2e62..719011f102a0 100644 --- a/Marlin/src/HAL/TEENSY35_36/Servo.h +++ b/Marlin/src/HAL/TEENSY35_36/Servo.h @@ -21,6 +21,10 @@ */ #pragma once +/** + * HAL Servo for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) + */ + #include // Inherit and expand on core Servo library diff --git a/Marlin/src/HAL/TEENSY35_36/eeprom.cpp b/Marlin/src/HAL/TEENSY35_36/eeprom.cpp index d2d7324cdd97..ccbdc6b11600 100644 --- a/Marlin/src/HAL/TEENSY35_36/eeprom.cpp +++ b/Marlin/src/HAL/TEENSY35_36/eeprom.cpp @@ -22,15 +22,14 @@ */ #if defined(__MK64FX512__) || defined(__MK66FX1M0__) +/** + * HAL PersistentStore for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) + */ + #include "../../inc/MarlinConfig.h" #if USE_WIRED_EEPROM -/** - * PersistentStore for Arduino-style EEPROM interface - * with implementations supplied by the framework. - */ - #include "../shared/eeprom_api.h" #include diff --git a/Marlin/src/HAL/TEENSY35_36/endstop_interrupts.h b/Marlin/src/HAL/TEENSY35_36/endstop_interrupts.h index 92e22efc0fe6..87e6a7507abc 100644 --- a/Marlin/src/HAL/TEENSY35_36/endstop_interrupts.h +++ b/Marlin/src/HAL/TEENSY35_36/endstop_interrupts.h @@ -22,7 +22,7 @@ #pragma once /** - * Endstop Interrupts + * HAL Endstop Interrupts for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) * * Without endstop interrupts the endstop pins must be polled continually in * the temperature-ISR via endstops.update(), most of the time finding no change. diff --git a/Marlin/src/HAL/TEENSY35_36/pinsDebug.h b/Marlin/src/HAL/TEENSY35_36/pinsDebug.h index e57c73c59558..e529fa93be16 100644 --- a/Marlin/src/HAL/TEENSY35_36/pinsDebug.h +++ b/Marlin/src/HAL/TEENSY35_36/pinsDebug.h @@ -18,6 +18,10 @@ */ #pragma once +/** + * HAL Pins Debugging for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) + */ + #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS #define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin diff --git a/Marlin/src/HAL/TEENSY35_36/spi_pins.h b/Marlin/src/HAL/TEENSY35_36/spi_pins.h index 276d4f456a7f..c76344d07546 100644 --- a/Marlin/src/HAL/TEENSY35_36/spi_pins.h +++ b/Marlin/src/HAL/TEENSY35_36/spi_pins.h @@ -21,6 +21,10 @@ */ #pragma once +/** + * HAL SPI Pins for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) + */ + #define SCK_PIN 13 #define MISO_PIN 12 #define MOSI_PIN 11 diff --git a/Marlin/src/HAL/TEENSY35_36/timers.cpp b/Marlin/src/HAL/TEENSY35_36/timers.cpp index 5725e83a85da..8067d091dd01 100644 --- a/Marlin/src/HAL/TEENSY35_36/timers.cpp +++ b/Marlin/src/HAL/TEENSY35_36/timers.cpp @@ -21,8 +21,7 @@ */ /** - * Teensy3.5 __MK64FX512__ - * Teensy3.6 __MK66FX1M0__ + * HAL Timers for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) */ #if defined(__MK64FX512__) || defined(__MK66FX1M0__) diff --git a/Marlin/src/HAL/TEENSY35_36/timers.h b/Marlin/src/HAL/TEENSY35_36/timers.h index 68060d0e1c06..5c623cd80192 100644 --- a/Marlin/src/HAL/TEENSY35_36/timers.h +++ b/Marlin/src/HAL/TEENSY35_36/timers.h @@ -16,13 +16,12 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #pragma once /** - * Description: HAL for - * Teensy3.5 (__MK64FX512__) - * Teensy3.6 (__MK66FX1M0__) + * HAL Timers for Teensy 3.5 (MK64FX512) and Teensy 3.6 (MK66FX1M0) */ #include diff --git a/Marlin/src/HAL/TEENSY40_41/HAL.cpp b/Marlin/src/HAL/TEENSY40_41/HAL.cpp index f5d37f5fc44d..5b1b4272f5ee 100644 --- a/Marlin/src/HAL/TEENSY40_41/HAL.cpp +++ b/Marlin/src/HAL/TEENSY40_41/HAL.cpp @@ -21,7 +21,7 @@ */ /** - * Description: HAL for Teensy40 (IMXRT1062) + * HAL for Teensy 4.0 / 4.1 (IMXRT1062) */ #ifdef __IMXRT1062__ diff --git a/Marlin/src/HAL/TEENSY40_41/HAL.h b/Marlin/src/HAL/TEENSY40_41/HAL.h index b3b0144d134b..1aff6eed8e91 100644 --- a/Marlin/src/HAL/TEENSY40_41/HAL.h +++ b/Marlin/src/HAL/TEENSY40_41/HAL.h @@ -22,7 +22,7 @@ #pragma once /** - * Description: HAL for Teensy 4.0 and Teensy 4.1 + * HAL for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) */ #define CPU_32_BIT @@ -45,8 +45,9 @@ // Defines // ------------------------ -#ifdef __IMXRT1062__ - #define IS_32BIT_TEENSY 1 +#define IS_32BIT_TEENSY 1 +#define IS_TEENSY_40_41 1 +#ifndef IS_TEENSY40 #define IS_TEENSY41 1 #endif diff --git a/Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp b/Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp index 9ccbb3a1f45b..20b472aa3515 100644 --- a/Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp +++ b/Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp @@ -19,6 +19,11 @@ * along with this program. If not, see . * */ + +/** + * HAL SPI for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) + */ + #ifdef __IMXRT1062__ #include "HAL.h" diff --git a/Marlin/src/HAL/TEENSY40_41/Servo.cpp b/Marlin/src/HAL/TEENSY40_41/Servo.cpp index e3d0d034499d..ffb1102b14f9 100644 --- a/Marlin/src/HAL/TEENSY40_41/Servo.cpp +++ b/Marlin/src/HAL/TEENSY40_41/Servo.cpp @@ -19,6 +19,11 @@ * along with this program. If not, see . * */ + +/** + * HAL Servo for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) + */ + #ifdef __IMXRT1062__ #include "../../inc/MarlinConfig.h" @@ -53,5 +58,4 @@ void libServo::detach() { } #endif // HAS_SERVOS - #endif // __IMXRT1062__ diff --git a/Marlin/src/HAL/TEENSY40_41/Servo.h b/Marlin/src/HAL/TEENSY40_41/Servo.h index ce910ed8a854..699fd700c943 100644 --- a/Marlin/src/HAL/TEENSY40_41/Servo.h +++ b/Marlin/src/HAL/TEENSY40_41/Servo.h @@ -21,6 +21,10 @@ */ #pragma once +/** + * HAL Servo for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) + */ + #include // Inherit and expand on core Servo library diff --git a/Marlin/src/HAL/TEENSY40_41/eeprom.cpp b/Marlin/src/HAL/TEENSY40_41/eeprom.cpp index 5491e04fbcc7..030a8c38af3f 100644 --- a/Marlin/src/HAL/TEENSY40_41/eeprom.cpp +++ b/Marlin/src/HAL/TEENSY40_41/eeprom.cpp @@ -27,8 +27,7 @@ #if USE_WIRED_EEPROM /** - * PersistentStore for Arduino-style EEPROM interface - * with implementations supplied by the framework. + * HAL PersistentStore for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) */ #include "../shared/eeprom_api.h" diff --git a/Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h b/Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h index 92e22efc0fe6..a05e911668a7 100644 --- a/Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h +++ b/Marlin/src/HAL/TEENSY40_41/endstop_interrupts.h @@ -22,7 +22,7 @@ #pragma once /** - * Endstop Interrupts + * HAL Endstop Interrupts for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) * * Without endstop interrupts the endstop pins must be polled continually in * the temperature-ISR via endstops.update(), most of the time finding no change. diff --git a/Marlin/src/HAL/TEENSY40_41/fastio.h b/Marlin/src/HAL/TEENSY40_41/fastio.h index 19b8114509b7..52f991dfb85f 100644 --- a/Marlin/src/HAL/TEENSY40_41/fastio.h +++ b/Marlin/src/HAL/TEENSY40_41/fastio.h @@ -23,7 +23,7 @@ #pragma once /** - * Fast I/O interfaces for Teensy 4 + * Fast I/O interfaces for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) * These use GPIO functions instead of Direct Port Manipulation, as on AVR. */ diff --git a/Marlin/src/HAL/TEENSY40_41/pinsDebug.h b/Marlin/src/HAL/TEENSY40_41/pinsDebug.h index 890f66865011..4ad62d00fea5 100644 --- a/Marlin/src/HAL/TEENSY40_41/pinsDebug.h +++ b/Marlin/src/HAL/TEENSY40_41/pinsDebug.h @@ -18,6 +18,10 @@ */ #pragma once +/** + * HAL Pins Debugging for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) + */ + #warning "PINS_DEBUGGING is not fully supported for Teensy 4.0 / 4.1 so 'M43' may cause hangs." #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS diff --git a/Marlin/src/HAL/TEENSY40_41/spi_pins.h b/Marlin/src/HAL/TEENSY40_41/spi_pins.h index 276d4f456a7f..d6f8d41bf6ce 100644 --- a/Marlin/src/HAL/TEENSY40_41/spi_pins.h +++ b/Marlin/src/HAL/TEENSY40_41/spi_pins.h @@ -21,6 +21,10 @@ */ #pragma once +/** + * HAL SPI Pins for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) + */ + #define SCK_PIN 13 #define MISO_PIN 12 #define MOSI_PIN 11 diff --git a/Marlin/src/HAL/TEENSY40_41/timers.cpp b/Marlin/src/HAL/TEENSY40_41/timers.cpp index 15f5185a6ba0..81c9b08c17a5 100644 --- a/Marlin/src/HAL/TEENSY40_41/timers.cpp +++ b/Marlin/src/HAL/TEENSY40_41/timers.cpp @@ -21,7 +21,7 @@ */ /** - * Teensy4.0/4.1 (__IMXRT1062__) + * HAL Timers for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) */ #ifdef __IMXRT1062__ diff --git a/Marlin/src/HAL/TEENSY40_41/timers.h b/Marlin/src/HAL/TEENSY40_41/timers.h index 9c4bf8c274cc..7e4cd080cb88 100644 --- a/Marlin/src/HAL/TEENSY40_41/timers.h +++ b/Marlin/src/HAL/TEENSY40_41/timers.h @@ -16,12 +16,12 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . + * */ #pragma once /** - * Description: HAL for - * Teensy4.0/4.1 (__IMXRT1062__) + * HAL Timers for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) */ #include diff --git a/Marlin/src/HAL/TEENSY40_41/watchdog.cpp b/Marlin/src/HAL/TEENSY40_41/watchdog.cpp index 4253944f2b79..8b05ddb153eb 100644 --- a/Marlin/src/HAL/TEENSY40_41/watchdog.cpp +++ b/Marlin/src/HAL/TEENSY40_41/watchdog.cpp @@ -19,6 +19,11 @@ * along with this program. If not, see . * */ + +/** + * HAL Watchdog for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) + */ + #ifdef __IMXRT1062__ #include "../../inc/MarlinConfig.h" @@ -48,5 +53,4 @@ void HAL_watchdog_refresh() { } #endif // USE_WATCHDOG - #endif // __IMXRT1062__ diff --git a/Marlin/src/HAL/TEENSY40_41/watchdog.h b/Marlin/src/HAL/TEENSY40_41/watchdog.h index f10ecb5aef9c..03ab151b0706 100644 --- a/Marlin/src/HAL/TEENSY40_41/watchdog.h +++ b/Marlin/src/HAL/TEENSY40_41/watchdog.h @@ -22,7 +22,7 @@ #pragma once /** - * Watchdog for Teensy4.0/4.1 (__IMXRT1062__) + * HAL Watchdog for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A) */ void watchdog_init(); diff --git a/Marlin/src/HAL/shared/HAL_ST7920.h b/Marlin/src/HAL/shared/HAL_ST7920.h index 05e8a1f2c558..4e362f96ba55 100644 --- a/Marlin/src/HAL/shared/HAL_ST7920.h +++ b/Marlin/src/HAL/shared/HAL_ST7920.h @@ -27,7 +27,7 @@ * (bypassing U8G), it will allow the LIGHTWEIGHT_UI to operate. */ -#if BOTH(HAS_GRAPHICAL_LCD, LIGHTWEIGHT_UI) +#if BOTH(HAS_MARLINUI_U8GLIB, LIGHTWEIGHT_UI) void ST7920_cs(); void ST7920_ncs(); void ST7920_set_cmd(); diff --git a/Marlin/src/HAL/shared/servo.cpp b/Marlin/src/HAL/shared/servo.cpp index d69cf2fe2c8f..cfec6f301737 100644 --- a/Marlin/src/HAL/shared/servo.cpp +++ b/Marlin/src/HAL/shared/servo.cpp @@ -48,7 +48,6 @@ * readMicroseconds() - Get the last-written servo pulse width in microseconds. * attached() - Return true if a servo is attached. * detach() - Stop an attached servo from pulsing its i/o pin. - * */ #include "../../inc/MarlinConfig.h" diff --git a/Marlin/src/HAL/shared/servo.h b/Marlin/src/HAL/shared/servo.h index ccaf1f0255df..6d850da851d2 100644 --- a/Marlin/src/HAL/shared/servo.h +++ b/Marlin/src/HAL/shared/servo.h @@ -41,7 +41,6 @@ */ /** - * * A servo is activated by creating an instance of the Servo class passing the desired pin to the attach() method. * The servos are pulsed in the background using the value most recently written using the write() method * diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index c6c6ef9b0db5..672858d05a35 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -1048,6 +1048,11 @@ void setup() { SERIAL_ECHO_MSG("Compiled: " __DATE__); SERIAL_ECHO_MSG(STR_FREE_MEMORY, freeMemory(), STR_PLANNER_BUFFER_BYTES, (int)sizeof(block_t) * (BLOCK_BUFFER_SIZE)); + // Init buzzer pin(s) + #if USE_BEEPER + SETUP_RUN(buzzer.init()); + #endif + // Set up LEDs early #if HAS_COLOR_LEDS SETUP_RUN(leds.setup()); @@ -1072,7 +1077,7 @@ void setup() { DWIN_UpdateLCD(); // Show bootscreen (first image) #else SETUP_RUN(ui.init()); - #if HAS_SPI_LCD && ENABLED(SHOW_BOOTSCREEN) + #if HAS_WIRED_LCD && ENABLED(SHOW_BOOTSCREEN) SETUP_RUN(ui.show_bootscreen()); #endif SETUP_RUN(ui.reset_status()); // Load welcome message early. (Retained if no errors exist.) diff --git a/Marlin/src/core/language.h b/Marlin/src/core/language.h index 0bcf799ac31d..a644ab2fc8be 100644 --- a/Marlin/src/core/language.h +++ b/Marlin/src/core/language.h @@ -303,7 +303,7 @@ #define LCD_STR_C STR_C #define LCD_STR_E STR_E -#if HAS_CHARACTER_LCD +#if HAS_MARLINUI_HD44780 // Custom characters defined in the first 8 characters of the LCD #define LCD_STR_BEDTEMP "\x00" // Print only as a char. This will have 'unexpected' results when used in a string! @@ -348,7 +348,6 @@ * However, internal to Marlin E0/T0 is the first tool, and * most board silkscreens say "E0." Zero-based labels will * make these indexes consistent but this defies expectation. - * */ #if ENABLED(NUMBER_TOOLS_FROM_0) #define LCD_FIRST_TOOL 0 diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp index 9fc9ec099e8b..dc91b7d6b185 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp @@ -997,6 +997,10 @@ if (do_ubl_mesh_map) display_map(g29_map_type); // Display the current point + #if IS_TFTGLCD_PANEL + ui.ubl_plot(lpos.x, lpos.y); // update plot screen + #endif + ui.refresh(); float new_z = z_values[lpos.x][lpos.y]; diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp index 63559e0bb88e..010b5951be5f 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_motion.cpp @@ -236,9 +236,7 @@ } /** - * * Generic case of a line crossing both X and Y Mesh lines. - * */ xy_int8_t cnt = (istart - iend).ABS(); diff --git a/Marlin/src/feature/encoder_i2c.cpp b/Marlin/src/feature/encoder_i2c.cpp index f67d50a6e038..8a3e959e0702 100644 --- a/Marlin/src/feature/encoder_i2c.cpp +++ b/Marlin/src/feature/encoder_i2c.cpp @@ -816,7 +816,6 @@ int8_t I2CPositionEncodersMgr::parse() { * Y Report on Y axis encoder, if present. * Z Report on Z axis encoder, if present. * E Report on E axis encoder, if present. - * */ void I2CPositionEncodersMgr::M860() { if (parse()) return; @@ -846,7 +845,6 @@ void I2CPositionEncodersMgr::M860() { * Y Report on Y axis encoder, if present. * Z Report on Z axis encoder, if present. * E Report on E axis encoder, if present. - * */ void I2CPositionEncodersMgr::M861() { if (parse()) return; @@ -875,7 +873,6 @@ void I2CPositionEncodersMgr::M861() { * Y Report on Y axis encoder, if present. * Z Report on Z axis encoder, if present. * E Report on E axis encoder, if present. - * */ void I2CPositionEncodersMgr::M862() { if (parse()) return; @@ -905,7 +902,6 @@ void I2CPositionEncodersMgr::M862() { * Y Report on Y axis encoder, if present. * Z Report on Z axis encoder, if present. * E Report on E axis encoder, if present. - * */ void I2CPositionEncodersMgr::M863() { if (parse()) return; diff --git a/Marlin/src/feature/mmu2/mmu2.cpp b/Marlin/src/feature/mmu2/mmu2.cpp index 31fa529d56b1..3d635369e438 100644 --- a/Marlin/src/feature/mmu2/mmu2.cpp +++ b/Marlin/src/feature/mmu2/mmu2.cpp @@ -340,17 +340,17 @@ void MMU2::mmu_loop() { #endif if (rx_ok()) { - // response to C0 mmu command in PRUSA_MMU2_S_MODE + // Response to C0 mmu command in PRUSA_MMU2_S_MODE bool can_reset = true; - if (ENABLED(PRUSA_MMU2_S_MODE) && last_cmd == MMU_CMD_C0) { - if (!mmu2s_triggered) { + #if ENABLED(PRUSA_MMU2_S_MODE) + if (!mmu2s_triggered && last_cmd == MMU_CMD_C0) { can_reset = false; // MMU ok received but filament sensor not triggered, retrying... DEBUG_ECHOLNPGM("MMU => 'ok' (filament not present in gears)"); DEBUG_ECHOLNPGM("MMU <= 'C0' (keep trying)"); MMU2_COMMAND("C0"); } - } + #endif if (can_reset) { DEBUG_ECHOLNPGM("MMU => 'ok'"); ready = true; @@ -710,13 +710,11 @@ void MMU2::tool_change(const uint8_t index) { } /** - * * Handle special T?/Tx/Tc commands * * T? Gcode to extrude shouldn't have to follow, load to extruder wheels is done automatically * Tx Same as T?, except nozzle doesn't have to be preheated. Tc must be placed after extruder nozzle is preheated to finish filament load. * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated. - * */ void MMU2::tool_change(const char* special) { if (!enabled) return; @@ -922,9 +920,7 @@ void MMU2::filament_runout() { } /** - * * Switch material and load to nozzle - * */ bool MMU2::load_filament_to_nozzle(const uint8_t index) { diff --git a/Marlin/src/feature/pause.cpp b/Marlin/src/feature/pause.cpp index f8a7d83260e2..a36ff5075683 100644 --- a/Marlin/src/feature/pause.cpp +++ b/Marlin/src/feature/pause.cpp @@ -612,11 +612,13 @@ void resume_print(const float &slow_load_length/*=0*/, const float &fast_load_le // Retract to prevent oozing unscaled_e_move(-(PAUSE_PARK_RETRACT_LENGTH), feedRate_t(PAUSE_PARK_RETRACT_FEEDRATE)); - // Move XY to starting position, then Z - do_blocking_move_to_xy(resume_position, feedRate_t(NOZZLE_PARK_XY_FEEDRATE)); + if (!axes_should_home()) { + // Move XY to starting position, then Z + do_blocking_move_to_xy(resume_position, feedRate_t(NOZZLE_PARK_XY_FEEDRATE)); - // Move Z_AXIS to saved position - do_blocking_move_to_z(resume_position.z, feedRate_t(NOZZLE_PARK_Z_FEEDRATE)); + // Move Z_AXIS to saved position + do_blocking_move_to_z(resume_position.z, feedRate_t(NOZZLE_PARK_Z_FEEDRATE)); + } // Unretract unscaled_e_move(PAUSE_PARK_RETRACT_LENGTH, feedRate_t(PAUSE_PARK_RETRACT_FEEDRATE)); diff --git a/Marlin/src/feature/power_monitor.cpp b/Marlin/src/feature/power_monitor.cpp index bf5ac748a86e..af31d156fc84 100644 --- a/Marlin/src/feature/power_monitor.cpp +++ b/Marlin/src/feature/power_monitor.cpp @@ -44,7 +44,7 @@ uint8_t PowerMonitor::display_item; PowerMonitor power_monitor; // Single instance - this calls the constructor -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #if ENABLED(POWER_MONITOR_CURRENT) void PowerMonitor::draw_current() { @@ -70,6 +70,6 @@ PowerMonitor power_monitor; // Single instance - this calls the constructor } #endif -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB #endif // HAS_POWER_MONITOR diff --git a/Marlin/src/feature/power_monitor.h b/Marlin/src/feature/power_monitor.h index a86bd07ec4d1..a0eaf353f4c7 100644 --- a/Marlin/src/feature/power_monitor.h +++ b/Marlin/src/feature/power_monitor.h @@ -88,8 +88,8 @@ class PowerMonitor { FORCE_INLINE static float getPower() { return getAmps() * getVolts(); } #endif - #if HAS_SPI_LCD - #if HAS_GRAPHICAL_LCD && DISABLED(LIGHTWEIGHT_UI) + #if HAS_WIRED_LCD + #if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI) FORCE_INLINE static bool display_enabled() { return flags != 0x00; } #endif #if ENABLED(POWER_MONITOR_CURRENT) diff --git a/Marlin/src/feature/powerloss.cpp b/Marlin/src/feature/powerloss.cpp index ed3a4b9fadea..e4bc605bb55f 100644 --- a/Marlin/src/feature/powerloss.cpp +++ b/Marlin/src/feature/powerloss.cpp @@ -112,8 +112,7 @@ void PrintJobRecovery::check() { if (card.isMounted()) { load(); if (!valid()) return cancel(); - queue.inject_P(PSTR("M1000 S")); - TERN_(DWIN_CREALITY_LCD, dwin_flag = true); + queue.inject_P(PSTR("M1000S")); } } @@ -227,6 +226,10 @@ void PrintJobRecovery::save(const bool force/*=false*/, const float zraise/*=0*/ // Elapsed print job time info.print_job_elapsed = print_job_timer.duration(); + // Misc. Marlin flags + info.flag.dryrun = !!(marlin_debug_flags & MARLIN_DEBUG_DRYRUN); + info.flag.allow_cold_extrusion = TERN0(PREVENT_COLD_EXTRUSION, thermalManager.allow_cold_extrude); + write(); } } @@ -326,6 +329,12 @@ void PrintJobRecovery::resume() { const uint32_t resume_sdpos = info.sdpos; // Get here before the stepper ISR overwrites it + // Apply the dry-run flag if enabled + if (info.flag.dryrun) marlin_debug_flags |= MARLIN_DEBUG_DRYRUN; + + // Restore cold extrusion permission + TERN_(PREVENT_COLD_EXTRUSION, thermalManager.allow_cold_extrude = info.flag.allow_cold_extrusion); + #if HAS_LEVELING // Make sure leveling is off before any G92 and G28 gcode.process_subcommands_now_P(PSTR("M420 S0 Z0")); @@ -337,7 +346,7 @@ void PrintJobRecovery::resume() { // If Z homing goes to max, just reset E and home all gcode.process_subcommands_now_P(PSTR( "G92.9 E0\n" - "G28R0" TERN_(MARLIN_DEV_MODE, "S") + "G28R0" )); #else // "G92.9 E0 ..." @@ -358,8 +367,9 @@ void PrintJobRecovery::resume() { gcode.process_subcommands_now_P(PSTR( "G28R0" // No raise during G28 - TERN_(MARLIN_DEV_MODE, "S") // Simulated Homing - TERN_(IS_CARTESIAN, "XY") // Don't home Z on Cartesian + #if IS_CARTESIAN && DISABLED(POWER_LOSS_RECOVER_ZHOME) + "XY" // Don't home Z on Cartesian unless overridden + #endif )); #endif @@ -367,6 +377,12 @@ void PrintJobRecovery::resume() { // Pretend that all axes are homed set_all_homed(); + #if ENABLED(POWER_LOSS_RECOVER_ZHOME) + // Z has been homed so restore Z to ZsavedPos + POWER_LOSS_ZRAISE + sprintf_P(cmd, PSTR("G1 F500 Z%s"), dtostrf(info.current_position.z + POWER_LOSS_ZRAISE, 1, 3, str_1)); + gcode.process_subcommands_now(cmd); + #endif + // Recover volumetric extrusion state #if DISABLED(NO_VOLUMETRICS) #if HAS_MULTI_EXTRUDER @@ -473,7 +489,7 @@ void PrintJobRecovery::resume() { // Move back to the saved Z dtostrf(info.current_position.z, 1, 3, str_1); - #if Z_HOME_DIR > 0 + #if Z_HOME_DIR > 0 || ENABLED(POWER_LOSS_RECOVER_ZHOME) sprintf_P(cmd, PSTR("G1 Z%s F200"), str_1); #else gcode.process_subcommands_now_P(PSTR("G1 Z0 F200")); @@ -498,6 +514,14 @@ void PrintJobRecovery::resume() { LOOP_XYZ(i) update_workspace_offset((AxisEnum)i); #endif + #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) + const uint8_t old_flags = marlin_debug_flags; + marlin_debug_flags |= MARLIN_DEBUG_ECHO; + #endif + + // Continue to apply PLR when a file is resumed! + enable(true); + // Resume the SD file from the last position char *fn = info.sd_filename; extern const char M23_STR[]; @@ -505,6 +529,8 @@ void PrintJobRecovery::resume() { gcode.process_subcommands_now(cmd); sprintf_P(cmd, PSTR("M24 S%ld T%ld"), resume_sdpos, info.print_job_elapsed); gcode.process_subcommands_now(cmd); + + TERN_(DEBUG_POWER_LOSS_RECOVERY, marlin_debug_flags = old_flags); } #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) @@ -584,6 +610,8 @@ void PrintJobRecovery::resume() { DEBUG_ECHOLNPAIR("sd_filename: ", info.sd_filename); DEBUG_ECHOLNPAIR("sdpos: ", info.sdpos); DEBUG_ECHOLNPAIR("print_job_elapsed: ", info.print_job_elapsed); + DEBUG_ECHOLNPAIR("dryrun: ", int(info.flag.dryrun)); + DEBUG_ECHOLNPAIR("allow_cold_extrusion: ", int(info.flag.allow_cold_extrusion)); } else DEBUG_ECHOLNPGM("INVALID DATA"); diff --git a/Marlin/src/feature/powerloss.h b/Marlin/src/feature/powerloss.h index 1943175b0564..e31b2ec915c3 100644 --- a/Marlin/src/feature/powerloss.h +++ b/Marlin/src/feature/powerloss.h @@ -107,6 +107,12 @@ typedef struct { // Job elapsed time millis_t print_job_elapsed; + // Misc. Marlin flags + struct { + bool dryrun:1; // M111 S8 + bool allow_cold_extrusion:1; // M302 P1 + } flag; + uint8_t valid_foot; bool valid() { return valid_head && valid_head == valid_foot; } @@ -173,7 +179,10 @@ class PrintJobRecovery { } #endif - static inline bool valid() { return info.valid(); } + // The referenced file exists + static inline bool interrupted_file_exists() { return card.fileExists(info.sd_filename); } + + static inline bool valid() { return info.valid() && interrupted_file_exists(); } #if ENABLED(DEBUG_POWER_LOSS_RECOVERY) static void debug(PGM_P const prefix); diff --git a/Marlin/src/feature/twibus.h b/Marlin/src/feature/twibus.h index 8bc8eb4e74d7..82aa9aa16a2a 100644 --- a/Marlin/src/feature/twibus.h +++ b/Marlin/src/feature/twibus.h @@ -48,7 +48,6 @@ typedef void (*twiRequestFunc_t)(); * For more information see * - https://marlinfw.org/docs/gcode/M260.html * - https://marlinfw.org/docs/gcode/M261.html - * */ class TWIBus { private: diff --git a/Marlin/src/gcode/bedlevel/G26.cpp b/Marlin/src/gcode/bedlevel/G26.cpp index cd0dbb13cdcb..c66d4a7d4974 100644 --- a/Marlin/src/gcode/bedlevel/G26.cpp +++ b/Marlin/src/gcode/bedlevel/G26.cpp @@ -359,7 +359,7 @@ inline bool turn_on_heaters() { #if HAS_HEATED_BED if (g26_bed_temp > 25) { - #if HAS_SPI_LCD + #if HAS_WIRED_LCD ui.set_status_P(GET_TEXT(MSG_G26_HEATING_BED), 99); ui.quick_feedback(); TERN_(HAS_LCD_MENU, ui.capture()); @@ -378,7 +378,7 @@ inline bool turn_on_heaters() { #endif // HAS_HEATED_BED // Start heating the active nozzle - #if HAS_SPI_LCD + #if HAS_WIRED_LCD ui.set_status_P(GET_TEXT(MSG_G26_HEATING_NOZZLE), 99); ui.quick_feedback(); #endif @@ -391,7 +391,7 @@ inline bool turn_on_heaters() { #endif )) return G26_ERR; - #if HAS_SPI_LCD + #if HAS_WIRED_LCD ui.reset_status(); ui.quick_feedback(); #endif @@ -446,7 +446,7 @@ inline bool prime_nozzle() { else #endif { - #if HAS_SPI_LCD + #if HAS_WIRED_LCD ui.set_status_P(GET_TEXT(MSG_G26_FIXED_LENGTH), 99); ui.quick_feedback(); #endif diff --git a/Marlin/src/gcode/bedlevel/G35.cpp b/Marlin/src/gcode/bedlevel/G35.cpp index 926e6e82c535..bd7f4f0411e1 100755 --- a/Marlin/src/gcode/bedlevel/G35.cpp +++ b/Marlin/src/gcode/bedlevel/G35.cpp @@ -157,7 +157,7 @@ void GcodeSuite::G35() { const int minutes = trunc(decimal_part * 60.0f); SERIAL_ECHOPAIR("Turn ", tramming_point_name[i], - " ", (screw_thread & 1) == (adjust > 0) ? "Counter-Clockwise" : "Clockwise", + " ", (screw_thread & 1) == (adjust > 0) ? "CCW" : "CW", " by ", abs(full_turns), " turns"); if (minutes) SERIAL_ECHOPAIR(" and ", abs(minutes), " minutes"); SERIAL_EOL(); diff --git a/Marlin/src/gcode/bedlevel/abl/G29.cpp b/Marlin/src/gcode/bedlevel/abl/G29.cpp index 9bb1ebe23819..e9b6e0e3a6db 100644 --- a/Marlin/src/gcode/bedlevel/abl/G29.cpp +++ b/Marlin/src/gcode/bedlevel/abl/G29.cpp @@ -160,7 +160,6 @@ * E By default G29 will engage the Z probe, test the bed, then disengage. * Include "E" to engage/disengage the Z probe for each sample. * There's no extra effect if you have a fixed Z probe. - * */ G29_TYPE GcodeSuite::G29() { diff --git a/Marlin/src/gcode/bedlevel/mbl/G29.cpp b/Marlin/src/gcode/bedlevel/mbl/G29.cpp index 68ac459ebb43..5da99386adc5 100644 --- a/Marlin/src/gcode/bedlevel/mbl/G29.cpp +++ b/Marlin/src/gcode/bedlevel/mbl/G29.cpp @@ -57,7 +57,6 @@ inline void echo_not_entered(const char c) { SERIAL_CHAR(c); SERIAL_ECHOLNPGM(" * S3 In Jn Zn.nn Manually modify a single point * S4 Zn.nn Set z offset. Positive away from bed, negative closer to bed. * S5 Reset and disable mesh - * */ void GcodeSuite::G29() { diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index be222a7b1724..7bc40b2127c4 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -192,7 +192,6 @@ * X Home to the X endstop * Y Home to the Y endstop * Z Home to the Z endstop - * */ void GcodeSuite::G28() { DEBUG_SECTION(log_G28, "G28", DEBUGGING(LEVELING)); diff --git a/Marlin/src/gcode/calibrate/M100.cpp b/Marlin/src/gcode/calibrate/M100.cpp index 5ec709fb4002..9ac2380e7964 100644 --- a/Marlin/src/gcode/calibrate/M100.cpp +++ b/Marlin/src/gcode/calibrate/M100.cpp @@ -60,7 +60,7 @@ #define TEST_BYTE ((char) 0xE5) -#if defined(__AVR__) || IS_32BIT_TEENSY +#if EITHER(__AVR__, IS_32BIT_TEENSY) extern char __bss_end; char *end_bss = &__bss_end, diff --git a/Marlin/src/gcode/calibrate/M48.cpp b/Marlin/src/gcode/calibrate/M48.cpp index 88273b46e46e..8640dfa39166 100644 --- a/Marlin/src/gcode/calibrate/M48.cpp +++ b/Marlin/src/gcode/calibrate/M48.cpp @@ -144,7 +144,7 @@ void GcodeSuite::M48() { float sample_sum = 0.0; LOOP_L_N(n, n_samples) { - #if HAS_SPI_LCD + #if HAS_WIRED_LCD // Display M48 progress in the status bar ui.status_printf_P(0, PSTR(S_FMT ": %d/%d"), GET_TEXT(MSG_M48_POINT), int(n + 1), int(n_samples)); #endif @@ -258,7 +258,7 @@ void GcodeSuite::M48() { SERIAL_ECHOLNPGM("Finished!"); dev_report(verbose_level > 0, mean, sigma, min, max, true); - #if HAS_SPI_LCD + #if HAS_WIRED_LCD // Display M48 results in the status bar char sigma_str[8]; ui.status_printf_P(0, PSTR(S_FMT ": %s"), GET_TEXT(MSG_M48_DEVIATION), dtostrf(sigma, 2, 6, sigma_str)); diff --git a/Marlin/src/gcode/control/M999.cpp b/Marlin/src/gcode/control/M999.cpp index 53d74322a39a..3bd908cad640 100644 --- a/Marlin/src/gcode/control/M999.cpp +++ b/Marlin/src/gcode/control/M999.cpp @@ -34,7 +34,6 @@ * * Sending "M999 S1" will resume printing without flushing the * existing command buffer. - * */ void GcodeSuite::M999() { marlin_state = MF_RUNNING; diff --git a/Marlin/src/gcode/feature/L6470/M906.cpp b/Marlin/src/gcode/feature/L6470/M906.cpp index cd7fc3dcb5d1..7bd446a1ab77 100644 --- a/Marlin/src/gcode/feature/L6470/M906.cpp +++ b/Marlin/src/gcode/feature/L6470/M906.cpp @@ -33,7 +33,6 @@ #include "../../../core/debug_out.h" /** - * * M906: report or set KVAL_HOLD which sets the maximum effective voltage provided by the * PWMs to the steppers * @@ -56,7 +55,6 @@ * * L6470 is used in the STEP-CLOCK mode. KVAL_HOLD is the only KVAL_xxx * that affects the effective voltage seen by the stepper. - * */ /** diff --git a/Marlin/src/gcode/feature/L6470/M916-918.cpp b/Marlin/src/gcode/feature/L6470/M916-918.cpp index 29efc06dd9c7..8165b71e4490 100644 --- a/Marlin/src/gcode/feature/L6470/M916-918.cpp +++ b/Marlin/src/gcode/feature/L6470/M916-918.cpp @@ -37,7 +37,6 @@ #include "../../../core/debug_out.h" /** - * * M916: increase KVAL_HOLD until get thermal warning * NOTE - on L6474 it is TVAL that is used * @@ -62,7 +61,6 @@ * * D - time (in seconds) to run each setting of KVAL_HOLD/TVAL * optional - defaults to zero (runs each setting once) - * */ /** @@ -187,7 +185,6 @@ void GcodeSuite::M916() { } /** - * * M917: Find minimum current thresholds * * Decrease OCD current until overcurrent error @@ -214,7 +211,6 @@ void GcodeSuite::M916() { * * K - value for KVAL_HOLD (0 - 255) (ignored for L6474) * optional - will report current value from driver if not specified - * */ void GcodeSuite::M917() { @@ -522,7 +518,6 @@ void GcodeSuite::M917() { } /** - * * M918: increase speed until error or max feedrate achieved (as shown in configuration.h)) * * J - select which driver(s) to monitor on multi-driver axis @@ -543,7 +538,6 @@ void GcodeSuite::M917() { * * M - value for microsteps (1 - 128) (optional) * optional - will report current value from driver if not specified - * */ void GcodeSuite::M918() { diff --git a/Marlin/src/gcode/feature/i2c/M260_M261.cpp b/Marlin/src/gcode/feature/i2c/M260_M261.cpp index 13c2cd1d10ed..526d9101e1c7 100644 --- a/Marlin/src/gcode/feature/i2c/M260_M261.cpp +++ b/Marlin/src/gcode/feature/i2c/M260_M261.cpp @@ -42,7 +42,6 @@ * * M260 S1 ; Send the buffered data and reset the buffer * M260 R1 ; Reset the buffer without sending data - * */ void GcodeSuite::M260() { // Set the target address diff --git a/Marlin/src/gcode/feature/pause/M603.cpp b/Marlin/src/gcode/feature/pause/M603.cpp index c40f3ae6e136..9c3b774bd2b2 100644 --- a/Marlin/src/gcode/feature/pause/M603.cpp +++ b/Marlin/src/gcode/feature/pause/M603.cpp @@ -39,7 +39,6 @@ * T[toolhead] - Select extruder to configure, active extruder if not specified * U[distance] - Retract distance for removal, for the specified extruder * L[distance] - Extrude distance for insertion, for the specified extruder - * */ void GcodeSuite::M603() { diff --git a/Marlin/src/gcode/feature/power_monitor/M430.cpp b/Marlin/src/gcode/feature/power_monitor/M430.cpp index a669f0a76b42..7639ea962d9b 100644 --- a/Marlin/src/gcode/feature/power_monitor/M430.cpp +++ b/Marlin/src/gcode/feature/power_monitor/M430.cpp @@ -38,7 +38,7 @@ */ void GcodeSuite::M430() { bool do_report = true; - #if HAS_SPI_LCD + #if HAS_WIRED_LCD #if ENABLED(POWER_MONITOR_CURRENT) if (parser.seen('I')) { power_monitor.set_current_display(parser.value_bool()); do_report = false; } #endif diff --git a/Marlin/src/gcode/feature/powerloss/M1000.cpp b/Marlin/src/gcode/feature/powerloss/M1000.cpp index 58e810e5d075..e9477dd2fbf3 100644 --- a/Marlin/src/gcode/feature/powerloss/M1000.cpp +++ b/Marlin/src/gcode/feature/powerloss/M1000.cpp @@ -62,6 +62,8 @@ void GcodeSuite::M1000() { if (parser.seen('S')) { #if HAS_LCD_MENU ui.goto_screen(menu_job_recovery); + #elif ENABLED(DWIN_CREALITY_LCD) + recovery.dwin_flag = true; #elif ENABLED(EXTENSIBLE_UI) ExtUI::onPowerLossResume(); #else diff --git a/Marlin/src/gcode/feature/powerloss/M413.cpp b/Marlin/src/gcode/feature/powerloss/M413.cpp index 5a08053e7c9d..3538ccaa6e07 100644 --- a/Marlin/src/gcode/feature/powerloss/M413.cpp +++ b/Marlin/src/gcode/feature/powerloss/M413.cpp @@ -50,6 +50,7 @@ void GcodeSuite::M413() { if (parser.seen("RL")) recovery.load(); if (parser.seen('W')) recovery.save(true); if (parser.seen('P')) recovery.purge(); + if (parser.seen('D')) recovery.debug(PSTR("M413")); #if PIN_EXISTS(POWER_LOSS) if (parser.seen('O')) recovery._outage(); #endif diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index 085f6b361895..425a85736932 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -289,7 +289,6 @@ * "T" Codes * * T0-T3 - Select an extruder (tool) by index: "T F" - * */ #include "../inc/MarlinConfig.h" diff --git a/Marlin/src/gcode/sd/M32.cpp b/Marlin/src/gcode/sd/M32.cpp index a6f9fbcd8db1..55ec6ea49741 100644 --- a/Marlin/src/gcode/sd/M32.cpp +++ b/Marlin/src/gcode/sd/M32.cpp @@ -38,7 +38,6 @@ * M32 !PATH/TO/FILE.GCO# ; Start FILE.GCO * M32 P !PATH/TO/FILE.GCO# ; Start FILE.GCO as a procedure * M32 S60 !PATH/TO/FILE.GCO# ; Start FILE.GCO at byte 60 - * */ void GcodeSuite::M32() { if (IS_SD_PRINTING()) planner.synchronize(); diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index 95c93beb9ec1..d2c939b9b448 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -217,6 +217,28 @@ #define LCD_WIDTH 16 #define LCD_HEIGHT 2 +#elif EITHER(TFTGLCD_PANEL_SPI, TFTGLCD_PANEL_I2C) + + #define IS_TFTGLCD_PANEL 1 + #define IS_ULTIPANEL // Note that IS_ULTIPANEL leads to HAS_WIRED_LCD + + #if ENABLED(SDSUPPORT) && DISABLED(LCD_PROGRESS_BAR) + #define LCD_PROGRESS_BAR + #endif + #if ENABLED(TFTGLCD_PANEL_I2C) + #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD for I2C and SPI buses (LiquidTWI2 not required) + #define LCD_I2C_ADDRESS 0x27 // Must be equal to panel's I2C slave addres + #endif + #define STD_ENCODER_PULSES_PER_STEP 2 + #define STD_ENCODER_STEPS_PER_MENU_ITEM 1 + #define LCD_WIDTH 20 // 20 or 24 chars in line + #define LCD_HEIGHT 10 // Character lines + #define LCD_CONTRAST_MIN 127 + #define LCD_CONTRAST_MAX 255 + #define DEFAULT_LCD_CONTRAST 250 + #define CONVERT_TO_EXT_ASCII // Use extended 128-255 symbols from ASCII table. + // At this time present conversion only for cyrillic - bg, ru and uk languages. + // First 7 ASCII symbols in panel font must be replaced with Marlin's special symbols. #endif #if ENABLED(IS_RRD_FG_SC) @@ -456,11 +478,13 @@ #endif #if ENABLED(ULTRA_LCD) - #define HAS_SPI_LCD 1 + #define HAS_WIRED_LCD 1 #if ENABLED(DOGLCD) - #define HAS_GRAPHICAL_LCD 1 + #define HAS_MARLINUI_U8GLIB 1 + #elif IS_TFTGLCD_PANEL + // Neither DOGM nor HD44780. Fully customized interface. #elif DISABLED(HAS_GRAPHICAL_TFT) - #define HAS_CHARACTER_LCD 1 + #define HAS_MARLINUI_HD44780 1 #endif #endif @@ -471,7 +495,7 @@ #define HAS_ADC_BUTTONS 1 #endif -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef LCD_PIXEL_WIDTH #define LCD_PIXEL_WIDTH 128 #endif @@ -488,7 +512,6 @@ * HOTENDS - Number of hotends, whether connected or separate * E_STEPPERS - Number of actual E stepper motors * E_MANUAL - Number of E steppers for LCD move options - * */ #if EXTRUDERS == 0 diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index c9a29b351cbb..80c42955e92d 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -313,11 +313,15 @@ #elif ENABLED(MAKRPANEL) #define _LCD_CONTRAST_INIT 17 #elif ENABLED(MINIPANEL) - #define _LCD_CONTRAST_INIT 150 + #define _LCD_CONTRAST_INIT 150 #elif ENABLED(ZONESTAR_12864OLED) #define _LCD_CONTRAST_MIN 64 #define _LCD_CONTRAST_INIT 128 #define _LCD_CONTRAST_MAX 255 +#elif IS_TFTGLCD_PANEL + #define _LCD_CONTRAST_MIN 0 + #define _LCD_CONTRAST_INIT 250 + #define _LCD_CONTRAST_MAX 255 #endif #ifdef _LCD_CONTRAST_INIT @@ -2453,9 +2457,9 @@ /** * Buzzer/Speaker */ -#if PIN_EXISTS(BEEPER) || EITHER(LCD_USE_I2C_BUZZER, PCA9632_BUZZER) +#if PIN_EXISTS(BEEPER) || ANY(LCD_USE_I2C_BUZZER, PCA9632_BUZZER, IS_TFTGLCD_PANEL) #define HAS_BUZZER 1 - #if NONE(LCD_USE_I2C_BUZZER, PCA9632_BUZZER) + #if PIN_EXISTS(BEEPER) #define USE_BEEPER 1 #endif #endif @@ -2483,7 +2487,7 @@ /** * Make sure DOGLCD_SCK and DOGLCD_MOSI are defined. */ -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef DOGLCD_SCK #define DOGLCD_SCK SCK_PIN #endif @@ -2604,17 +2608,17 @@ #define HAS_FOLDER_SORTING 1 #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // Get LCD character width/height, which may be overridden by pins, configs, etc. #ifndef LCD_WIDTH - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #define LCD_WIDTH 21 #else #define LCD_WIDTH TERN(ULTIPANEL, 20, 16) #endif #endif #ifndef LCD_HEIGHT - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #define LCD_HEIGHT 5 #else #define LCD_HEIGHT TERN(ULTIPANEL, 4, 2) diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 1cb8bcd7e902..5bd6ef7c7860 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -680,7 +680,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS * LCD Info Screen Style */ #if LCD_INFO_SCREEN_STYLE > 0 - #if HAS_GRAPHICAL_LCD || LCD_WIDTH < 20 || LCD_HEIGHT < 4 + #if HAS_MARLINUI_U8GLIB || LCD_WIDTH < 20 || LCD_HEIGHT < 4 #error "Alternative LCD_INFO_SCREEN_STYLE requires 20x4 Character LCD." #elif LCD_INFO_SCREEN_STYLE > 1 #error "LCD_INFO_SCREEN_STYLE only has options 0 and 1 at this time." @@ -693,16 +693,16 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #if ENABLED(LCD_PROGRESS_BAR) #if NONE(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY) #error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY." - #elif !HAS_CHARACTER_LCD - #error "LCD_PROGRESS_BAR requires a character LCD." - #elif HAS_GRAPHICAL_LCD + #elif NONE(HAS_MARLINUI_HD44780, IS_TFTGLCD_PANEL) + #error "LCD_PROGRESS_BAR only applies to HD44780 character LCD and TFTGLCD_PANEL_(SPI|I2C)." + #elif HAS_MARLINUI_U8GLIB #error "LCD_PROGRESS_BAR does not apply to graphical displays." #elif ENABLED(FILAMENT_LCD_DISPLAY) #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." #elif PROGRESS_MSG_EXPIRE < 0 #error "PROGRESS_MSG_EXPIRE must be greater than or equal to 0." #endif -#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_GRAPHICAL_LCD, HAS_GRAPHICAL_TFT, HAS_CHARACTER_LCD, EXTENSIBLE_UI) +#elif ENABLED(LCD_SET_PROGRESS_MANUALLY) && NONE(HAS_MARLINUI_U8GLIB, HAS_GRAPHICAL_TFT, HAS_MARLINUI_HD44780, EXTENSIBLE_UI) #error "LCD_SET_PROGRESS_MANUALLY requires LCD_PROGRESS_BAR, Character LCD, Graphical LCD, TFT, or EXTENSIBLE_UI." #endif @@ -713,9 +713,9 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Custom Boot and Status screens */ -#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && NONE(HAS_GRAPHICAL_LCD, TOUCH_UI_FTDI_EVE) +#if ENABLED(SHOW_CUSTOM_BOOTSCREEN) && NONE(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE) #error "SHOW_CUSTOM_BOOTSCREEN requires Graphical LCD or TOUCH_UI_FTDI_EVE." -#elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_GRAPHICAL_LCD +#elif ENABLED(CUSTOM_STATUS_SCREEN_IMAGE) && !HAS_MARLINUI_U8GLIB #error "CUSTOM_STATUS_SCREEN_IMAGE requires a Graphical LCD." #endif @@ -782,7 +782,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "MESH_BED_LEVELING and BABYSTEP_ZPROBE_OFFSET is not a valid combination" #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && !HAS_BED_PROBE #error "BABYSTEP_ZPROBE_OFFSET requires a probe." - #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !HAS_GRAPHICAL_LCD + #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && !HAS_MARLINUI_U8GLIB #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a Graphical LCD." #elif ENABLED(BABYSTEP_ZPROBE_GFX_OVERLAY) && DISABLED(BABYSTEP_ZPROBE_OFFSET) #error "BABYSTEP_ZPROBE_GFX_OVERLAY requires a BABYSTEP_ZPROBE_OFFSET." @@ -1143,7 +1143,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Required LCD language */ -#if HAS_CHARACTER_LCD && !defined(DISPLAY_CHARSET_HD44780) +#if HAS_MARLINUI_HD44780 && !defined(DISPLAY_CHARSET_HD44780) #error "You must set DISPLAY_CHARSET_HD44780 to JAPANESE, WESTERN or CYRILLIC for your LCD controller." #endif @@ -1465,7 +1465,7 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #endif #endif -#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_GRAPHICAL_LCD) +#if ENABLED(MESH_EDIT_GFX_OVERLAY) && !BOTH(AUTO_BED_LEVELING_UBL, HAS_MARLINUI_U8GLIB) #error "MESH_EDIT_GFX_OVERLAY requires AUTO_BED_LEVELING_UBL and a Graphical LCD." #endif @@ -2274,7 +2274,9 @@ static_assert(hbm[Z_AXIS] >= 0, "HOMING_BUMP_MM.Z must be greater than or equal + ENABLED(TFT_LVGL_UI_FSMC) \ + ENABLED(TFT_LVGL_UI_SPI) \ + ENABLED(ANYCUBIC_LCD_I3MEGA) \ - + ENABLED(ANYCUBIC_LCD_CHIRON) + + ENABLED(ANYCUBIC_LCD_CHIRON) \ + + ENABLED(TFTGLCD_PANEL_SPI) \ + + ENABLED(TFTGLCD_PANEL_I2C) #error "Please select only one LCD controller option." #endif @@ -3081,7 +3083,7 @@ static_assert( _ARR_TEST(3,0) && _ARR_TEST(3,1) && _ARR_TEST(3,2) #undef _PIN_CONFLICT #endif -#if !HAS_GRAPHICAL_LCD +#if !HAS_MARLINUI_U8GLIB #if ENABLED(PRINT_PROGRESS_SHOW_DECIMALS) #error "PRINT_PROGRESS_SHOW_DECIMALS currently requires a Graphical LCD." #endif diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h index 4431dadce09c..2bf9c98bfb44 100644 --- a/Marlin/src/inc/Version.h +++ b/Marlin/src/inc/Version.h @@ -42,7 +42,7 @@ * version was tagged. */ #ifndef STRING_DISTRIBUTION_DATE - #define STRING_DISTRIBUTION_DATE "2020-09-28" + #define STRING_DISTRIBUTION_DATE "2020-10-04" #endif /** @@ -52,7 +52,7 @@ * to alert users to major changes. */ -#define MARLIN_HEX_VERSION 020006 +#define MARLIN_HEX_VERSION 020007 #ifndef REQUIRED_CONFIGURATION_H_VERSION #define REQUIRED_CONFIGURATION_H_VERSION MARLIN_HEX_VERSION #endif diff --git a/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp b/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp index 9fe69d442832..aa3c3c04a123 100644 --- a/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp +++ b/Marlin/src/lcd/HD44780/lcdprint_hd44780.cpp @@ -14,7 +14,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_CHARACTER_LCD +#if HAS_MARLINUI_HD44780 #include "../ultralcd.h" #include "../../MarlinCore.h" @@ -1119,4 +1119,4 @@ int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length) { #endif // DEBUG_LCDPRINT -#endif // HAS_CHARACTER_LCD +#endif // HAS_MARLINUI_HD44780 diff --git a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp index 3dc0925b432f..e6cc22746571 100644 --- a/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp +++ b/Marlin/src/lcd/HD44780/ultralcd_HD44780.cpp @@ -22,7 +22,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_CHARACTER_LCD +#if HAS_MARLINUI_HD44780 /** * ultralcd_HD44780.cpp @@ -1517,4 +1517,4 @@ void MarlinUI::draw_status_screen() { #endif // HAS_LCD_MENU -#endif // HAS_CHARACTER_LCD +#endif // HAS_MARLINUI_HD44780 diff --git a/Marlin/src/lcd/TFTGLCD/lcdprint_TFTGLCD.cpp b/Marlin/src/lcd/TFTGLCD/lcdprint_TFTGLCD.cpp new file mode 100644 index 000000000000..6cf660a6a99d --- /dev/null +++ b/Marlin/src/lcd/TFTGLCD/lcdprint_TFTGLCD.cpp @@ -0,0 +1,1142 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * @file lcdprint_TFTGLCD.cpp + * @brief LCD print API for TFT-GLCD interface + * @author Yunhui Fu (yhfudev@gmail.com) + * @version 1.0 + * @date 2016-08-19 + * @copyright GPL/BSD + */ + +/** + * The TFTGLCD only supports ??? languages. + */ + +#include "../../inc/MarlinConfigPre.h" + +#if IS_TFTGLCD_PANEL + +#include "../ultralcd.h" +#include "../../MarlinCore.h" +#include "../../libs/numtostr.h" + +#include "ultralcd_TFTGLCD.h" + +#include + +int lcd_glyph_height(void) { return 1; } + +typedef struct _TFTGLCD_charmap_t { + wchar_t uchar; // the unicode char + uint8_t idx; // the glyph of the char in the ROM + uint8_t idx2; // the char used to be combined with the idx to simulate a single char +} TFTGLCD_charmap_t; + +#ifdef __AVR__ + #define IV(a) U##a +#else + #define IV(a) L##a +#endif + +static const TFTGLCD_charmap_t g_TFTGLCD_charmap_device[] PROGMEM = { + // sorted by uchar: + #if DISPLAY_CHARSET_HD44780 == JAPANESE + + {IV('¢'), 0xEC, 0}, // A2 + {IV('°'), 0xDF, 0}, // B0, Marlin special: '°' LCD_STR_DEGREE (0x09) + {IV('ä'), 0xE1, 0}, // E4 + {IV('ö'), 0xEF, 0}, // F6 + {IV('÷'), 0xFD, 0}, // 00F7 + {IV('ü'), 0xF5, 0}, // 00FC + {IV('ˣ'), 0xEB, 0}, // 02E3 + + {IV('·'), 0xA5, 0}, // 0387 + {IV('Ώ'), 0xF4, 0}, // 038F + {IV('Θ'), 0xF2, 0}, // 0398, Theta + {IV('Ξ'), 0xE3, 0}, // 039E, Xi + {IV('Σ'), 0xF6, 0}, // 03A3, Sigma + {IV('Ω'), 0xF4, 0}, // 03A9, Omega + {IV('ά'), 0xE0, 0}, // 03AC + {IV('έ'), 0xE3, 0}, // 03AD + {IV('α'), 0xE0, 0}, // 03B1, alpha + {IV('β'), 0xE2, 0}, // 03B2, beta + {IV('ε'), 0xE3, 0}, // 03B5, epsilon + {IV('θ'), 0xF2, 0}, // 03B8, theta + {IV('μ'), 0xE4, 0}, // 03BC, mu + {IV('ξ'), 0xE3, 0}, // 03BE, xi + {IV('π'), 0xF7, 0}, // 03C0, pi + {IV('ρ'), 0xE6, 0}, // 03C1, rho + {IV('σ'), 0xE5, 0}, // 03C3, sigma + + {IV('←'), 0x7F, 0}, // 2190 + {IV('→'), 0x7E, 0}, // 2192, Marlin special: '⮈⮉⮊⮋➤→' LCD_STR_ARROW_RIGHT (0x03) + {IV('√'), 0xE8, 0}, // 221A + {IV('∞'), 0xF3, 0}, // 221E + {IV('█'), 0xFF, 0}, // 2588 + + //{IV(''), 0xA0, 0}, + {IV('。'), 0xA1, 0}, + {IV('「'), 0xA2, 0}, + {IV('」'), 0xA3, 0}, + {IV('゛'), 0xDE, 0}, // ‶ + {IV('゜'), 0xDF, 0}, // '〫' + {IV('゠'), '=', 0}, + {IV('ァ'), 0xA7, 0}, + {IV('ア'), 0xB1, 0}, + {IV('ィ'), 0xA8, 0}, + {IV('イ'), 0xB2, 0}, + {IV('ゥ'), 0xA9, 0}, + {IV('ウ'), 0xB3, 0}, + {IV('ェ'), 0xAA, 0}, + {IV('エ'), 0xB4, 0}, + {IV('ォ'), 0xAB, 0}, + + {IV('オ'), 0xB5, 0}, + {IV('カ'), 0xB6, 0}, + {IV('ガ'), 0xB6, 0xDE}, + {IV('キ'), 0xB7, 0}, + {IV('ギ'), 0xB7, 0xDE}, // + {IV('ク'), 0xB8, 0}, + {IV('グ'), 0xB8, 0xDE}, + {IV('ケ'), 0xB9, 0}, + {IV('ゲ'), 0xB9, 0xDE}, + {IV('コ'), 0xBA, 0}, + {IV('ゴ'), 0xBA, 0xDE}, + {IV('サ'), 0xBB, 0}, + {IV('ザ'), 0xBB, 0xDE}, + {IV('シ'), 0xBC, 0}, + {IV('ジ'), 0xBC, 0xDE}, + {IV('ス'), 0xBD, 0}, + {IV('ズ'), 0xBD, 0xDE}, + {IV('セ'), 0xBE, 0}, + {IV('ゼ'), 0xBE, 0xDE}, + {IV('ソ'), 0xBF, 0}, + {IV('ゾ'), 0xBF, 0xDE}, + + {IV('タ'), 0xC0, 0}, + {IV('ダ'), 0xC0, 0xDE}, + {IV('チ'), 0xC1, 0}, + {IV('ヂ'), 0xC1, 0xDE}, + {IV('ッ'), 0xAF, 0}, + {IV('ツ'), 0xC2, 0}, + {IV('ヅ'), 0xC2, 0xDE}, + {IV('テ'), 0xC3, 0}, + {IV('デ'), 0xC3, 0xDE}, + {IV('ト'), 0xC4, 0}, + {IV('ド'), 0xC4, 0xDE}, + {IV('ナ'), 0xC5, 0}, + {IV('ニ'), 0xC6, 0}, + {IV('ヌ'), 0xC7, 0}, + {IV('ネ'), 0xC8, 0}, + {IV('ノ'), 0xC9, 0}, + {IV('ハ'), 0xCA, 0}, + {IV('バ'), 0xCA, 0xDE}, + {IV('パ'), 0xCA, 0xDF}, + {IV('ヒ'), 0xCB, 0}, + {IV('ビ'), 0xCB, 0xDE}, + {IV('ピ'), 0xCB, 0xDF}, + {IV('フ'), 0xCC, 0}, + {IV('ブ'), 0xCC, 0xDE}, + {IV('プ'), 0xCC, 0xDF}, + {IV('ヘ'), 0xCD, 0}, + {IV('ベ'), 0xCD, 0xDE}, + {IV('ペ'), 0xCD, 0xDF}, + {IV('ホ'), 0xCE, 0}, + {IV('ボ'), 0xCE, 0xDE}, + {IV('ポ'), 0xCE, 0xDF}, + {IV('マ'), 0xCF, 0}, + + {IV('ミ'), 0xD0, 0}, + {IV('ム'), 0xD1, 0}, + {IV('メ'), 0xD2, 0}, + {IV('モ'), 0xD3, 0}, + {IV('ャ'), 0xAC, 0}, + {IV('ヤ'), 0xD4, 0}, + {IV('ュ'), 0xAD, 0}, + {IV('ユ'), 0xD5, 0}, + {IV('ョ'), 0xAE, 0}, + {IV('ヨ'), 0xD6, 0}, + {IV('ラ'), 0xD7, 0}, + {IV('リ'), 0xD8, 0}, + {IV('ル'), 0xD9, 0}, + {IV('レ'), 0xDA, 0}, + {IV('ロ'), 0xDB, 0}, + {IV('ワ'), 0xDC, 0}, + {IV('ヲ'), 0xA6, 0}, + {IV('ン'), 0xDD, 0}, + {IV('ヴ'), 0xB3, 0xDE}, + {IV('ヷ'), 0xDC, 0xDE}, + {IV('ヺ'), 0xA6, 0xDE}, + {IV('・'), 0xA5, 0}, + {IV('ー'), 0xB0, 0}, + {IV('ヽ'), 0xA4, 0}, + + //{IV('g'), 0xE7, 0}, // error + //{IV(''), 0xE9, 0}, + //{IV('j'), 0xEA, 0}, // error + //{IV(''), 0xED, 0}, + //{IV(''), 0xEE, 0}, + + //{IV('p'), 0xF0, 0}, // error + //{IV('q'), 0xF1, 0}, // error + //{IV(''), 0xF8, 0}, + //{IV('y'), 0xF9, 0}, // error + {IV('万'), 0xFB, 0}, + {IV('円'), 0xFC, 0}, + {IV('千'), 0xFA, 0}, + //{IV(''), 0xFE, 0}, + + //､･ｦｧｨｩｪｫｬｭｮｯｰ + {IV('､'), 0xA4, 0}, //ヽ + {IV('･'), 0xA5, 0}, //・ + {IV('ｦ'), 0xA6, 0}, //ヲ + {IV('ｧ'), 0xA7, 0}, //ァ + {IV('ｨ'), 0xA8, 0}, //ィ + {IV('ｩ'), 0xA9, 0}, //ゥ + {IV('ｪ'), 0xAA, 0}, //ェ + {IV('ｫ'), 0xAB, 0}, //ォ + {IV('ｬ'), 0xAC, 0}, //ャ + {IV('ｭ'), 0xAD, 0}, //ュ + {IV('ｮ'), 0xAE, 0}, //ョ + {IV('ｯ'), 0xAF, 0}, //ッ + {IV('ｰ'), 0xB0, 0}, //ー + + //ｱｲｳｴｵｶｷｸｹｺｻｼｽｾ + {IV('ｱ'), 0xB1, 0}, //ア + {IV('ｲ'), 0xB2, 0}, //イ + {IV('ｳ'), 0xB3, 0}, //ウ + {IV('ｴ'), 0xB4, 0}, //エ + {IV('ｵ'), 0xB5, 0}, //オ + {IV('ｶ'), 0xB6, 0}, //カ + {IV('ｷ'), 0xB7, 0}, //キ + {IV('ｸ'), 0xB8, 0}, //ク + {IV('ｹ'), 0xB9, 0}, //ケ + {IV('ｺ'), 0xBA, 0}, //コ + {IV('ｻ'), 0xBB, 0}, //サ + {IV('ｼ'), 0xBC, 0}, //シ + {IV('ｽ'), 0xBD, 0}, //ス + {IV('ｾ'), 0xBE, 0}, //セ + + //ｿﾀﾁﾂﾃﾄﾅﾆﾇﾈﾉﾊﾋﾌ + {IV('ｿ'), 0xBF, 0}, //ソ + {IV('ﾀ'), 0xC0, 0}, //タ + {IV('ﾁ'), 0xC1, 0}, //チ + {IV('ﾂ'), 0xC2, 0}, //ツ + {IV('ﾃ'), 0xC3, 0}, //テ + {IV('ﾄ'), 0xC4, 0}, //ト + {IV('ﾅ'), 0xC5, 0}, //ナ + {IV('ﾆ'), 0xC6, 0}, //ニ + {IV('ﾇ'), 0xC7, 0}, //ヌ + {IV('ﾈ'), 0xC8, 0}, //ネ + {IV('ﾉ'), 0xC9, 0}, //ノ + {IV('ﾊ'), 0xCA, 0}, //ハ + {IV('ﾋ'), 0xCB, 0}, //ヒ + {IV('ﾌ'), 0xCC, 0}, //フ + + //ﾍﾎﾏﾐﾑﾒﾓﾔﾕﾖﾗﾘﾙﾚﾛﾜﾝﾞﾟ + {IV('ﾍ'), 0xCD, 0}, //ヘ + {IV('ﾎ'), 0xCE, 0}, //ホ + {IV('ﾏ'), 0xCF, 0}, //マ + {IV('ﾐ'), 0xD0, 0}, //ミ + {IV('ﾑ'), 0xD1, 0}, //ム + {IV('ﾒ'), 0xD2, 0}, //メ + {IV('ﾓ'), 0xD3, 0}, //モ + {IV('ﾔ'), 0xD4, 0}, //ヤ + {IV('ﾕ'), 0xD5, 0}, //ユ + {IV('ﾖ'), 0xD6, 0}, //ヨ + {IV('ﾗ'), 0xD7, 0}, //ラ + {IV('ﾘ'), 0xD8, 0}, //リ + {IV('ﾙ'), 0xD9, 0}, //ル + {IV('ﾚ'), 0xDA, 0}, //レ + {IV('ﾛ'), 0xDB, 0}, //ロ + {IV('ﾜ'), 0xDC, 0}, //ワ + {IV('ﾝ'), 0xDD, 0}, //ン + {IV('ﾞ'), 0xDE, 0}, // ゛ + {IV('ﾟ'), 0xDF, 0}, // ゜ + + {IV('￥'), 0x5C, 0}, + + #elif DISPLAY_CHARSET_HD44780 == WESTERN + // 0x10 -- 0x1F (except 0x1C) + // 0x80 -- 0xFF (except 0xA7,0xB0,0xB1,0xB3,0xB4,0xBF,0xD1,0xF8,0xFA,0xFC-0xFF) + + {IV('¡'), 0xA9, 0}, + {IV('¢'), 0xA4, 0}, + {IV('£'), 0xA5, 0}, + {IV('¥'), 0xA6, 0}, + {IV('§'), 0xD2, 0}, // section sign + {IV('©'), 0xCF, 0}, + + {IV('ª'), 0x9D, 0}, + {IV('«'), 0xBB, 0}, + {IV('®'), 0xCE, 0}, + + {IV('°'), 0xB2, 0}, // Marlin special: '°' LCD_STR_DEGREE (0x09) + //{IV(''), 0xD1, 0}, + {IV('±'), 0x10, 0}, //∓± + //{'='), 0x1C, 0}, // error + {IV('²'), 0x1E, 0}, + {IV('³'), 0x1F, 0}, + {IV('¶'), 0xD3, 0}, // pilcrow sign + {IV('º'), 0x9E, 0}, + {IV('»'), 0xBC, 0}, // 00BB + //{IV(''), 0xB3, 0}, // error + //{IV(''), 0xB4, 0}, // error + {IV('¼'), 0xB6, 0}, // 00BC + {IV('½'), 0xB5, 0}, // 00BD + //{IV('¾'), '3', 0}, // 00BE + {IV('¿'), 0x9F, 0}, // 00BF + + {IV('Â'), 0x8F, 0}, + {IV('Ã'), 0xAA, 0}, + {IV('Ä'), 0x8E, 0}, + {IV('Æ'), 0x92, 0}, + {IV('Ç'), 0x80, 0}, + {IV('É'), 0x90, 0}, + {IV('Ñ'), 0x9C, 0}, + {IV('Õ'), 0xAC, 0}, + {IV('Ö'), 0x99, 0}, + {IV('×'), 0xB7, 0}, + {IV('Ø'), 0xAE, 0}, + {IV('Ü'), 0x9A, 0}, + {IV('à'), 0x85, 0}, + {IV('á'), 0xA0, 0}, + {IV('â'), 0x83, 0}, + {IV('ã'), 0xAB, 0}, + {IV('ä'), 0x84, 0}, + {IV('å'), 0x86, 0}, + {IV('æ'), 0x91, 0}, + {IV('ç'), 0x87, 0}, + {IV('è'), 0x8A, 0}, + {IV('é'), 0x82, 0}, + {IV('ê'), 0x88, 0}, + {IV('ë'), 0x89, 0}, + {IV('ì'), 0x8D, 0}, + {IV('í'), 0xA1, 0}, + {IV('î'), 0x8C, 0}, + {IV('ï'), 0x8B, 0}, + + {IV('ñ'), 0x9B, 0}, + {IV('ò'), 0x95, 0}, + {IV('ó'), 0xA2, 0}, + {IV('ô'), 0x93, 0}, + {IV('õ'), 0xAD, 0}, + {IV('ö'), 0x94, 0}, + {IV('÷'), 0xB8, 0}, + {IV('ø'), 0xAF, 0}, + {IV('ù'), 0x97, 0}, + {IV('ú'), 0xA3, 0}, + {IV('û'), 0x96, 0}, + {IV('ü'), 0x81, 0}, + {IV('ÿ'), 0x98, 0}, + + //{IV(''), 0xB0, 0}, // error + //{IV(''), 0xB1, 0}, // error + {IV('ƒ'), 0xA8, 0}, // 0192 + + {IV('Ύ'), 0xDB, 0}, // 038E + {IV('Ώ'), 0xDE, 0}, // 038F + {IV('ΐ'), 0xE7, 0}, // 0390 + + {IV('Γ'), 0xD4, 0}, // 0393, Gamma + {IV('Δ'), 0xD5, 0}, // 0394, Delta, ◿ + {IV('Θ'), 0xD6, 0}, // 0398, Theta + {IV('Λ'), 0xD7, 0}, // 039B, Lambda + {IV('Ξ'), 0xD8, 0}, // 039E, Xi + {IV('Π'), 0xD9, 0}, // Pi + {IV('Σ'), 0xDA, 0}, // Sigma + {IV('Υ'), 0xDB, 0}, // Upsilon + {IV('Φ'), 0xDC, 0}, // Phi + {IV('Ψ'), 0xDD, 0}, // Psi + {IV('Ω'), 0xDE, 0}, // Omega + + {IV('ά'), 0xDF, 0}, // 03AC + {IV('έ'), 0xE3, 0}, // 03AD + {IV('ή'), 0xE5, 0}, // 03AE + {IV('ί'), 0xE7, 0}, // 03AF + {IV('ΰ'), 0xF1, 0}, // 03B0 + + {IV('α'), 0xDF, 0}, // alpha + {IV('β'), 0xE0, 0}, // beta + {IV('γ'), 0xE1, 0}, // gamma + {IV('δ'), 0xE2, 0}, // delta + {IV('ε'), 0xE3, 0}, // epsilon + {IV('ζ'), 0xE4, 0}, // zeta + {IV('η'), 0xE5, 0}, // eta + {IV('θ'), 0xE6, 0}, // theta + {IV('ι'), 0xE7, 0}, // lota + {IV('κ'), 0xE8, 0}, // kappa + {IV('λ'), 0xE9, 0}, // lambda + {IV('μ'), 0xEA, 0}, // mu + {IV('ν'), 0xEB, 0}, // nu + {IV('ξ'), 0xEC, 0}, // xi + {IV('π'), 0xED, 0}, // pi + {IV('ρ'), 0xEE, 0}, // rho + {IV('σ'), 0xEF, 0}, // sigma + + {IV('τ'), 0xF0, 0}, // tau + {IV('υ'), 0xF1, 0}, // upsilon + {IV('χ'), 0xF2, 0}, // chi + {IV('ψ'), 0xF3, 0}, // psi + {IV('ω'), 0xF4, 0}, // 03C9, omega + {IV('ϊ'), 0xE7, 0}, // 03CA + {IV('ϋ'), 0xF1, 0}, // 03CB + {IV('ύ'), 0xF1, 0}, // 03CD + {IV('ώ'), 0xF4, 0}, // 03CE + + {IV('•'), 0xCD, 0}, // · + {IV('℞'), 0xA7, 0}, // ℞ Pt ASCII 158 + {IV('™'), 0xD0, 0}, + {IV('↤'), 0xF9, 0}, // ⟻ + {IV('↵'), 0xC4, 0}, + {IV('↻'), 0x04, 0}, // Marlin special: '↻↺⟳⟲' LCD_STR_REFRESH (0x01) + {IV('⇥'), 0xFB, 0}, + {IV('√'), 0xBE, 0}, // √ + {IV('∞'), 0xC2, 0}, // infinity + {IV('∫'), 0x1B, 0}, + {IV('∼'), 0x1D, 0}, + {IV('≈'), 0x1A, 0}, + {IV('≠'), 0xBD, 0}, + {IV('≡'), 0x11, 0}, + {IV('≤'), 0xB9, 0},// ≤≥ ⩽⩾ + {IV('≥'), 0xBA, 0}, + //{IV(''), 0xBF, 0}, // error + + {IV('⌠'), 0xC0, 0}, + {IV('⌡'), 0xC1, 0}, + + {IV('⎧'), 0x14, 0}, + {IV('⎩'), 0x15, 0}, + {IV('⎫'), 0x16, 0}, + {IV('⎭'), 0x17, 0}, + {IV('⎰'), 0x18, 0}, + {IV('⎱'), 0x19, 0}, + {IV('⎲'), 0x12, 0}, + {IV('⎳'), 0x13, 0}, + + {IV('⏱'), 0x07, 0}, // Marlin special: '🕐🕑🕒🕓🕔🕕🕖🕗🕘🕙🕚🕛🕜🕝🕞🕟🕠🕡🕢🕣🕤🕥🕦🕧 ⌚⌛⏰⏱⏳⧖⧗' LCD_STR_CLOCK (0x05) + {IV('┌'), 0xC9, 0}, + {IV('┐'), 0xCA, 0}, + {IV('└'), 0xCB, 0}, + {IV('┘'), 0xCC, 0}, + {IV('◸'), 0xC3, 0}, // ◿ + {IV('⭠'), 0xC8, 0}, + {IV('⭡'), 0xC5, 0}, + {IV('⭢'), 0xC7, 0}, + {IV('⭣'), 0xC6, 0}, + + + {IV('⯆'), 0xF5, 0}, + {IV('⯇'), 0xF7, 0}, // ⯅ + {IV('⯈'), 0xF6, 0}, + //{IV(''), 0xF8, 0}, // error + //{IV(''), 0xFA, 0}, // error + //{IV(''), 0xFC, 0}, // error + //{IV(''), 0xFD, 0}, // error + //{IV(''), 0xFE, 0}, // error + //{IV(''), 0xFF, 0}, // error + + #elif DISPLAY_CHARSET_HD44780 == CYRILLIC + + #ifdef CONVERT_TO_EXT_ASCII + {IV('°'), 0x01, 0}, // 00B0, Marlin special: '°' LCD_STR_DEGREE (0x09) + {IV('²'), 0x0e, 0}, // 0x32 if no special symbol in panel font + {IV('³'), 0x0f, 0}, // 0x33 if no special symbol in panel font + + // translate to cp866 codepage + //first ASCII symbols in panel font must be replaced with Marlin special symbols + {IV('Ё'), 0xF0, 0}, // 0401 + {IV('Є'), 0xF2, 0}, // 0404 + {IV('І'), 'I', 0}, // 0406 + {IV('Ї'), 0xF4, 0}, // 0407 + {IV('Ў'), 0xF6, 0}, // 040E + {IV('А'), 0x80, 0}, // 0410 + {IV('Б'), 0x81, 0}, + {IV('В'), 0x82, 0}, + {IV('Г'), 0x83, 0}, + {IV('Д'), 0x84, 0}, + {IV('Е'), 0x85, 0}, + {IV('Ж'), 0x86, 0}, + {IV('З'), 0x87, 0}, + {IV('И'), 0x88, 0}, + {IV('Й'), 0x89, 0}, + {IV('К'), 0x8A, 0}, + {IV('Л'), 0x8B, 0}, + {IV('М'), 0x8C, 0}, + {IV('Н'), 0x8D, 0}, + {IV('О'), 0x8E, 0}, + {IV('П'), 0x8F, 0}, + {IV('Р'), 0x90, 0}, + {IV('С'), 0x91, 0}, + {IV('Т'), 0x92, 0}, + {IV('У'), 0x93, 0}, + {IV('Ф'), 0x94, 0}, + {IV('Х'), 0x95, 0}, + {IV('Ц'), 0x96, 0}, + {IV('Ч'), 0x97, 0}, + {IV('Ш'), 0x98, 0}, + {IV('Щ'), 0x99, 0}, + {IV('Ъ'), 0x9A, 0}, + {IV('Ы'), 0x9B, 0}, + {IV('Ь'), 0x9C, 0}, + {IV('Э'), 0x9D, 0}, + {IV('Ю'), 0x9E, 0}, + {IV('Я'), 0x9F, 0}, + + {IV('а'), 0xA0, 0}, + {IV('б'), 0xA1, 0}, + {IV('в'), 0xA2, 0}, + {IV('г'), 0xA3, 0}, + {IV('д'), 0xA4, 0}, + {IV('е'), 0xA5, 0}, + {IV('ж'), 0xA6, 0}, + {IV('з'), 0xA7, 0}, + {IV('и'), 0xA8, 0}, + {IV('й'), 0xA9, 0}, + {IV('к'), 0xAA, 0}, + {IV('л'), 0xAB, 0}, + {IV('м'), 0xAC, 0}, + {IV('н'), 0xAD, 0}, + {IV('о'), 0xAE, 0}, + {IV('п'), 0xAF, 0}, + {IV('р'), 0xE0, 0}, + {IV('с'), 0xE1, 0}, + {IV('т'), 0xE2, 0}, + {IV('у'), 0xE3, 0}, + {IV('ф'), 0xE4, 0}, + {IV('х'), 0xE5, 0}, + {IV('ц'), 0xE6, 0}, + {IV('ч'), 0xE7, 0}, + {IV('ш'), 0xE8, 0}, + {IV('щ'), 0xE9, 0}, + {IV('ъ'), 0xEA, 0}, + {IV('ы'), 0xEB, 0}, + {IV('ь'), 0xEC, 0}, + {IV('э'), 0xED, 0}, + {IV('ю'), 0xEE, 0}, + {IV('я'), 0xEF, 0}, // 044F + {IV('ё'), 0xF1, 0}, // 0451 + {IV('є'), 0xF3, 0}, // 0454 + {IV('і'), 'i', 0}, // 0456 + {IV('ї'), 0xF5, 0}, // 0457 + {IV('ў'), 0xF7, 0}, // 045E + + #else + + {IV('¢'), 0x5C, 0}, // 00A2 + {IV('£'), 0xCF, 0}, // 00A3 + {IV('°'), 0x01, 0}, // 00B0, Marlin special: '°' LCD_STR_DEGREE (0x09) + + //{IV(''), 0x80, 0}, + //{IV(''), 0x81, 0}, + //{IV(''), 0x82, 0}, + //{IV(''), 0x83, 0}, + //{IV(''), 0x84, 0}, + //{IV(''), 0x85, 0}, + //{IV(''), 0x86, 0}, + //{IV(''), 0x87, 0}, + //{IV(''), 0x88, 0}, + //{IV(''), 0x89, 0}, + //{IV(''), 0x8A, 0}, + //{IV(''), 0x8B, 0}, + //{IV(''), 0x8C, 0}, + //{IV(''), 0x8D, 0}, + //{IV(''), 0x8E, 0}, + //{IV(''), 0x8F, 0}, + + //{IV(''), 0x90, 0}, + //{IV(''), 0x91, 0}, + //{IV(''), 0x92, 0}, + //{IV(''), 0x93, 0}, + //{IV(''), 0x94, 0}, + //{IV(''), 0x95, 0}, + //{IV(''), 0x96, 0}, + //{IV(''), 0x97, 0}, + //{IV(''), 0x98, 0}, + //{IV(''), 0x99, 0}, + //{IV(''), 0x9A, 0}, + //{IV(''), 0x9B, 0}, + //{IV(''), 0x9C, 0}, + //{IV(''), 0x9D, 0}, + //{IV(''), 0x9E, 0}, + //{IV(''), 0x9F, 0}, + + {IV('¼'), 0xF0, 0}, // 00BC + {IV('⅓'), 0xF1, 0}, + {IV('½'), 0xF2, 0}, // 00BD + {IV('¾'), 0xF3, 0}, // 00BE + {IV('¿'), 0xCD, 0}, // 00BF + + {IV('Ё'), 0xA2, 0}, // 0401 + {IV('А'), 'A', 0}, // 0410 + {IV('Б'), 0xA0, 0}, + {IV('В'), 'B', 0}, + {IV('Г'), 0xA1, 0}, + {IV('Д'), 0xE0, 0}, + {IV('Е'), 'E', 0}, + {IV('Ж'), 0xA3, 0}, + {IV('З'), 0xA4, 0}, + {IV('И'), 0xA5, 0}, + {IV('Й'), 0xA6, 0}, + {IV('К'), 'K', 0}, + {IV('Л'), 0xA7, 0}, + {IV('М'), 'M', 0}, + {IV('Н'), 'H', 0}, + {IV('О'), 'O', 0}, + {IV('П'), 0xA8, 0}, + {IV('Р'), 'P', 0}, + {IV('С'), 'C', 0}, + {IV('Т'), 'T', 0}, + {IV('У'), 0xA9, 0}, + {IV('Ф'), 0xAA, 0}, + {IV('Х'), 'X', 0}, + {IV('Ц'), 0xE1, 0}, + {IV('Ч'), 0xAB, 0}, + {IV('Ш'), 0xAC, 0}, + {IV('Щ'), 0xE2, 0}, + {IV('Ъ'), 0xAD, 0}, + {IV('Ы'), 0xAE, 0}, + {IV('Ь'), 'b', 0}, + {IV('Э'), 0xAF, 0}, + {IV('Ю'), 0xB0, 0}, + {IV('Я'), 0xB1, 0}, + {IV('а'), 'a', 0}, + + {IV('б'), 0xB2, 0}, + {IV('в'), 0xB3, 0}, + {IV('г'), 0xB4, 0}, + {IV('д'), 0xE3, 0}, + {IV('е'), 'e', 0}, + {IV('ж'), 0xB6, 0}, + {IV('з'), 0xB7, 0}, + {IV('и'), 0xB8, 0}, + {IV('й'), 0xB9, 0}, + {IV('к'), 0xBA, 0}, + {IV('л'), 0xBB, 0}, + {IV('м'), 0xBC, 0}, + {IV('н'), 0xBD, 0}, + {IV('о'), 'o', 0}, + {IV('п'), 0xBE, 0}, + {IV('р'), 'p', 0}, + {IV('с'), 'c', 0}, + {IV('т'), 0xBF, 0}, + + {IV('у'), 'y', 0}, + {IV('ф'), 0xE4, 0}, + {IV('х'), 'x', 0}, + {IV('ц'), 0xE5, 0}, + {IV('ч'), 0xC0, 0}, + {IV('ш'), 0xC1, 0}, + {IV('щ'), 0xE6, 0}, + {IV('ъ'), 0xC2, 0}, + {IV('ы'), 0xC3, 0}, + {IV('ь'), 0xC4, 0}, + {IV('э'), 0xC5, 0}, + {IV('ю'), 0xC6, 0}, + {IV('я'), 0xC7, 0}, // 044F + {IV('ё'), 0xB5, 0}, // 0451 + //{IV(''), 0xC8, 0}, + //{IV(''), 0xC9, 0}, + //{IV(''), 0xCA, 0}, + //{IV(''), 0xCB, 0}, + //{IV(''), 0xCC, 0}, + //{IV(''), 0xCD, 0}, + //{IV(''), 0xCE, 0}, + + //{IV(''), 0xD0, 0}, + //{IV(''), 0xD1, 0}, + //{IV(''), 0xD2, 0}, + //{IV(''), 0xD3, 0}, + //{IV(''), 0xD4, 0}, + //{IV(''), 0xD5, 0}, + //{IV(''), 0xD6, 0}, + //{IV(''), 0xD7, 0}, + //{IV(''), 0xD8, 0}, + //{IV(''), 0xDB, 0}, + //{IV(''), 0xDC, 0}, + //{IV(''), 0xDD, 0}, + //{IV(''), 0xDE, 0}, + //{IV(''), 0xDF, 0}, + + //{IV(''), 0xE7, 0}, + //{IV(''), 0xE8, 0}, + //{IV(''), 0xE9, 0}, + //{IV(''), 0xEA, 0}, + //{IV(''), 0xEB, 0}, + //{IV(''), 0xEC, 0}, + //{IV(''), 0xED, 0}, + //{IV(''), 0xEE, 0}, + //{IV(''), 0xEF, 0}, + + //{IV(''), 0xF4, 0}, + //{IV(''), 0xF5, 0}, + //{IV(''), 0xF6, 0}, + //{IV(''), 0xF7, 0}, + //{IV(''), 0xF8, 0}, + //{IV(''), 0xF9, 0}, + //{IV(''), 0xFA, 0}, + //{IV(''), 0xFB, 0}, + //{IV(''), 0xFC, 0}, + //{IV(''), 0xFD, 0}, + //{IV(''), 0xFE, 0}, + //{IV(''), 0xFF, 0}, + + {IV('↑'), 0xD9, 0}, // 2191 ←↑→↓ + {IV('↓'), 0xDA, 0}, // 2193 + + #endif + + #endif +}; + +// the plain ASCII replacement for various char +static const TFTGLCD_charmap_t g_TFTGLCD_charmap_common[] PROGMEM = { + {IV('¡'), 'i', 0}, // A1 + {IV('¢'), 'c', 0}, // A2 + {IV('°'), 0x09, 0}, // B0 Marlin special: '°' LCD_STR_DEGREE (0x09) + + #ifndef CONVERT_TO_EXT_ASCII //this time CONVERT_TO_EXT_ASCII works only with en, ru and uk languages + + // map WESTERN code to the plain ASCII + {IV('Á'), 'A', 0}, // C1 + {IV('Â'), 'A', 0}, // C2 + {IV('Ã'), 'A', 0}, // C3 + {IV('Ä'), 'A', 0}, // C4 + {IV('Å'), 'A', 0}, // C5 + {IV('Æ'), 'A', 'E'}, // C6 + {IV('Ç'), 'C', 0}, // C7 + {IV('È'), 'E', 0}, // C8 + {IV('É'), 'E', 0}, // C9 + {IV('Í'), 'I', 0}, // CD + {IV('Ñ'), 'N', 0}, // D1 + {IV('Õ'), 'O', 0}, // D5 + {IV('Ö'), 'O', 0}, // D6 + {IV('×'), 'x', 0}, // D7 + {IV('Ü'), 'U', 0}, // DC + {IV('Ý'), 'Y', 0}, // DD + {IV('à'), 'a', 0}, // E0 + {IV('á'), 'a', 0}, + {IV('â'), 'a', 0}, + {IV('ã'), 'a', 0}, + {IV('ä'), 'a', 0}, + {IV('å'), 'a', 0}, + {IV('æ'), 'a', 'e'}, + {IV('ç'), 'c', 0}, + {IV('è'), 'e', 0}, // 00E8 + {IV('é'), 'e', 0}, + {IV('ê'), 'e', 0}, + {IV('ë'), 'e', 0}, + {IV('ì'), 'i', 0}, // 00EC + {IV('í'), 'i', 0}, + {IV('î'), 'i', 0}, + {IV('ï'), 'i', 0}, // 00EF + + {IV('ñ'), 'n', 0}, // 00F1 + {IV('ò'), 'o', 0}, + {IV('ó'), 'o', 0}, + {IV('ô'), 'o', 0}, + {IV('õ'), 'o', 0}, + {IV('ö'), 'o', 0}, + //{IV('÷'), 0xB8, 0}, + {IV('ø'), 'o', 0}, + {IV('ù'), 'u', 0}, + {IV('ú'), 'u', 0}, + {IV('û'), 'u', 0}, + {IV('ü'), 'u', 0}, // FC + {IV('ý'), 'y', 0}, // FD + {IV('ÿ'), 'y', 0}, // FF + + {IV('Ą'), 'A', 0}, // 0104 + {IV('ą'), 'a', 0}, // 0105 + {IV('Ć'), 'C', 0}, // 0106 + {IV('ć'), 'c', 0}, // 0107 + {IV('Č'), 'C', 0}, // 010C + {IV('č'), 'c', 0}, // 010D + {IV('Ď'), 'D', 0}, // 010E + {IV('ď'), 'd', 0}, // 010F + {IV('đ'), 'd', 0}, // 0111 + {IV('ę'), 'e', 0}, // 0119 + {IV('ğ'), 'g', 0}, // 011F + {IV('İ'), 'I', 0}, // 0130 + {IV('ı'), 'i', 0}, // 0131 + + {IV('Ł'), 'L', 0}, // 0141 + {IV('ł'), 'l', 0}, // 0142 + {IV('Ń'), 'N', 0}, // 0143 + {IV('ń'), 'n', 0}, // 0144 + {IV('ň'), 'n', 0}, // 0148 + + {IV('ř'), 'r', 0}, // 0159 + {IV('Ś'), 'S', 0}, // 015A + {IV('ś'), 's', 0}, // 015B + {IV('ş'), 's', 0}, // 015F + {IV('Š'), 'S', 0}, // 0160 + {IV('š'), 's', 0}, // 0161 + {IV('ť'), 't', 0}, // 0165 + {IV('ů'), 'u', 0}, // 016F + {IV('ż'), 'z', 0}, // 017C + {IV('Ž'), 'Z', 0}, // 017D + {IV('ž'), 'z', 0}, // 017E + {IV('ƒ'), 'f', 0}, // 0192 + + {IV('ˣ'), 'x', 0}, // 02E3 + + {IV('΄'), '\'', 0}, // 0384 + {IV('΅'), '\'', 0}, // 0385 + {IV('Ά'), 'A', 0}, // 0386 + {IV('·'), '.', 0}, // 0387 + {IV('Έ'), 'E', 0}, // 0388 + {IV('Ή'), 'H', 0}, // 0389 + {IV('Ί'), 'I', 0}, // 038A + {IV('Ό'), 'O', 0}, // 038C + {IV('Ύ'), 'Y', 0}, // 038E + {IV('Ώ'), 'O', 0}, // 038F + {IV('ΐ'), 'i', 0}, // 0390 + {IV('Α'), 'A', 0}, // 0391 + {IV('Β'), 'B', 0}, // 0392 + {IV('Γ'), 'T', 0}, // 0393, Gamma + {IV('Δ'), '4', 0}, // 0394, Delta, ◿ + {IV('Ε'), 'E', 0}, // 0395 + {IV('Ζ'), 'Z', 0}, // 0396 + {IV('Η'), 'H', 0}, // 0397 + {IV('Θ'), '0', 0}, // 0398, Theta + {IV('Ι'), 'I', 0}, // 0399 + {IV('Κ'), 'K', 0}, // 039A + {IV('Λ'), '^', 0}, // 039B, Lambda + {IV('Μ'), 'M', 0}, // 039C + {IV('Ν'), 'N', 0}, // 039D + {IV('Ξ'), '3', 0}, // 039E, Xi + {IV('Ο'), 'O', 0}, // 039F + {IV('Π'), 'n', 0}, // 03A0, Pi + {IV('Ρ'), 'P', 0}, // 03A1 + {IV('Σ'), 'E', 0}, // 03A3, Sigma + {IV('Τ'), 'T', 0}, // 03A4 + {IV('Υ'), 'Y', 0}, // 03A5, Upsilon + {IV('Φ'), 'p', 0}, // 03A6, Phi + {IV('Χ'), 'X', 0}, // 03A7 + {IV('Ψ'), 'P', 0}, // 03A8, Psi + {IV('Ω'), 'O', 0}, // 03A9, Omega + {IV('Ϊ'), 'I', 0}, // 03AA + {IV('Ϋ'), 'Y', 0}, // 03AB + {IV('ά'), 'a', 0}, // 03AC + {IV('έ'), 'e', 0}, // 03AD + {IV('ή'), 'n', 0}, // 03AE + {IV('ί'), 'i', 0}, // 03AF + {IV('ΰ'), 'v', 0}, // 03B0 + {IV('α'), 'a', 0}, // 03B1, alpha + {IV('β'), 'B', 0}, // 03B2, beta + {IV('γ'), 'v', 0}, // 03B3, gamma + {IV('δ'), 'd', 0}, // 03B4, delta + {IV('ε'), 'e', 0}, // 03B5, epsilon + {IV('ζ'), 'Z', 0}, // 03B6, zeta + {IV('η'), 'n', 0}, // 03B7, eta + {IV('θ'), '0', 0}, // 03B8, theta + {IV('ι'), 'i', 0}, // 03B9, lota + {IV('κ'), 'k', 0}, // 03BA, kappa + {IV('λ'), 'L', 0}, // 03BB, lambda + {IV('μ'), 'u', 0}, // 03BC, mu + {IV('ν'), 'v', 0}, // 03BD, nu + {IV('ξ'), 'e', 0}, // 03BE, xi + {IV('ο'), 'o', 0}, // 03BF + {IV('π'), 'n', 0}, // 03C0, pi + {IV('ρ'), 'p', 0}, // 03C1, rho + {IV('ς'), 'c', 0}, // 03C2 + {IV('σ'), 'o', 0}, // 03C3, sigma + {IV('τ'), 't', 0}, // 03C4, tau + {IV('υ'), 'v', 0}, // 03C5, upsilon + {IV('φ'), 'p', 0}, // 03C6 + {IV('χ'), 'X', 0}, // 03C7, chi + {IV('ψ'), 'W', 0}, // 03C8, psi + {IV('ω'), 'w', 0}, // 03C9, omega + {IV('ϊ'), 'i', 0}, // 03CA + {IV('ϋ'), 'v', 0}, // 03CB + {IV('ό'), 'o', 0}, // 03CC + {IV('ύ'), 'v', 0}, // 03CD + {IV('ώ'), 'w', 0}, // 03CE + + // map CYRILLIC code to the plain ASCII + {IV('А'), 'A', 0}, // 0410 + {IV('Б'), 'b', 0}, // 0411 + {IV('В'), 'B', 0}, // 0412 + {IV('Г'), 'T', 0}, // 0413 + {IV('Д'), 'Q', 0}, // 0414 + {IV('Е'), 'E', 0}, // 0415 + {IV('Ж'), '*', 0}, // 0416 + {IV('З'), 'E', 0}, // 0417 + {IV('И'), 'N', 0}, // 0418 + {IV('Й'), 'N', 0}, // 0419 + {IV('К'), 'K', 0}, // 041A + {IV('Л'), 'T', 0}, // 041B + {IV('М'), 'M', 0}, // 041C + {IV('Н'), 'H', 0}, // 041D + {IV('О'), 'O', 0}, // 041E + {IV('П'), 'n', 0}, // 041F + {IV('Р'), 'P', 0}, // 0420 + {IV('С'), 'C', 0}, // 0421 + {IV('Т'), 'T', 0}, // 0422 + {IV('У'), 'Y', 0}, + {IV('Ф'), 'o', 0}, + {IV('Х'), 'X', 0}, + {IV('Ц'), 'U', 0}, + {IV('Ч'), 'y', 0}, + {IV('Ш'), 'W', 0}, + {IV('Щ'), 'W', 0}, + {IV('Ъ'), 'b', 0}, + {IV('Ы'), 'b', '|'}, + {IV('Ь'), 'b'}, + {IV('Э'), 'e'}, + {IV('Ю'), '|', 'O'}, + {IV('Я'), '9', '|'}, // 042F + + {IV('а'), 'a', 0}, // 0430 + {IV('б'), '6', 0}, // 0431 + {IV('в'), 'B', 0}, // 0432, + {IV('г'), 'r', 0}, // 0433 + {IV('д'), 'a', 0}, // 0434, + {IV('е'), 'e', 0}, // 0435 + {IV('ж'), '*', 0}, // 0436 + {IV('з'), 'e', 0}, // 0437, + {IV('и'), 'u', 0}, // 0438 + {IV('й'), 'u', 0}, // 0439, + {IV('к'), 'k', 0}, // 043A + {IV('л'), 'n', 0}, + {IV('м'), 'm', 0}, + {IV('н'), 'H', 0}, + {IV('о'), 'o', 0}, + {IV('п'), 'n', 0}, + {IV('р'), 'p', 0}, + {IV('с'), 'c', 0}, + {IV('т'), 't', 0}, + {IV('у'), 'y', 0}, + {IV('ф'), 'q', 'p'}, + {IV('х'), 'x', 0}, + {IV('ц'), 'u', 0}, + {IV('ч'), 'y', 0}, + {IV('ш'), 'w', 0}, + {IV('щ'), 'w', 0}, + {IV('ъ'), 'b', 0}, + {IV('ы'), 'b', '|'}, + {IV('ь'), 'b', 0}, + {IV('э'), 'e', 0}, + {IV('ю'), '|', 'o'}, + {IV('я'), 'g', 0}, // 044F + + #endif + + {IV('•'), '.', 0}, // 2022 · + {IV('℞'), 'P', 'x'}, // 211E ℞ Pt ASCII 158 + {IV('™'), 'T', 'M'}, // 2122 + {IV('←'), '<', '-'}, // 2190 + {IV('→'), '-', '>'}, // 2192, Marlin special: '⮈⮉⮊⮋➤→⏵➟➠➡' LCD_STR_ARROW_RIGHT (0x03) + //{IV('↰'), '<', 0}, // 21B0, Marlin special: '⮥⮭⮉⇧↑↰⤴' LCD_STR_UPLEVEL (0x04) + {IV('↰'), 0x03, 0}, // 21B0, Marlin special: '⮥⮭⮉⇧↑↰⤴' LCD_STR_UPLEVEL (0x04) + {IV('↻'), 0x04, 0}, // 21BB Marlin special: '↻↺⟳⟲' LCD_STR_REFRESH (0x01) + {IV('∼'), '~', 0}, // 223C + {IV('≈'), '~', '='}, // 2248 + {IV('≠'), '!', '='}, // 2260 + {IV('≡'), '=', 0}, // 2261 + {IV('≤'), '<', '='},// 2264, ≤≥ ⩽⩾ + {IV('≥'), '>', '='}, // 2265 + {IV('⏱'), 0x07, 0}, // 23F1, Marlin special: '🕐🕑🕒🕓🕔🕕🕖🕗🕘🕙🕚🕛🕜🕝🕞🕟🕠🕡🕢🕣🕤🕥🕦🕧 ⌚⌛⏰⏱⏳⧖⧗' LCD_STR_CLOCK (0x05) + + {IV('゠'), '=', 0}, // 30A0 + + // ⏰⏱⏲⏳◴◵◶◷ + // ⏻⏼♁♂ + //{IV(''), 0x00, 0}, // Marlin special: '' LCD_STR_BEDTEMP (0x07) + {IV('🌡'), 0x02, 0}, // D83CDF21 Marlin special: '🌡' LCD_STR_THERMOMETER (0x08) + {IV('📂'), 0x05, 0}, // D83DDCC2 Marlin special: '📁📂' LCD_STR_FOLDER (0x02) + //{IV(''), 0x06, 0}, // Marlin special: '' LCD_STR_FEEDRATE (0x06) +}; + +/* return v1 - v2 */ +static int TFTGLCD_charmap_compare(TFTGLCD_charmap_t * v1, TFTGLCD_charmap_t * v2) { + return (v1->uchar < v2->uchar) ? -1 : (v1->uchar > v2->uchar) ? 1 : 0; +} + +static int pf_bsearch_cb_comp_hd4map_pgm(void *userdata, size_t idx, void * data_pin) { + TFTGLCD_charmap_t localval; + TFTGLCD_charmap_t *p_TFTGLCD_charmap = (TFTGLCD_charmap_t *)userdata; + memcpy_P(&localval, p_TFTGLCD_charmap + idx, sizeof(localval)); + return TFTGLCD_charmap_compare(&localval, (TFTGLCD_charmap_t *)data_pin); +} + +void lcd_moveto(const lcd_uint_t col, const lcd_uint_t row) { lcd.setCursor(col, row); } + +void lcd_put_int(const int i) { + const char* str = i16tostr3left(i); + while (*str) lcd.write(*str++); +} + +// return < 0 on error +// return the advanced cols +int lcd_put_wchar_max(wchar_t c, pixel_len_t max_length) { + + // find the HD44780 internal ROM first + int ret; + size_t idx = 0; + TFTGLCD_charmap_t pinval; + TFTGLCD_charmap_t *copy_address = nullptr; + pinval.uchar = c; + pinval.idx = -1; + + if (max_length < 1) return 0; + + if (c < 128) { + lcd.write((uint8_t)c); + return 1; + } + copy_address = nullptr; + ret = pf_bsearch_r((void *)g_TFTGLCD_charmap_device, COUNT(g_TFTGLCD_charmap_device), pf_bsearch_cb_comp_hd4map_pgm, (void *)&pinval, &idx); + if (ret >= 0) { + copy_address = (TFTGLCD_charmap_t *)(g_TFTGLCD_charmap_device + idx); + } + else { + ret = pf_bsearch_r((void *)g_TFTGLCD_charmap_common, COUNT(g_TFTGLCD_charmap_common), pf_bsearch_cb_comp_hd4map_pgm, (void *)&pinval, &idx); + if (ret >= 0) copy_address = (TFTGLCD_charmap_t *)(g_TFTGLCD_charmap_common + idx); + } + + if (ret >= 0) { + TFTGLCD_charmap_t localval; + // found + memcpy_P(&localval, copy_address, sizeof(localval)); + lcd.write(localval.idx); + if (max_length >= 2 && localval.idx2 > 0) { + lcd.write(localval.idx2); + return 2; + } + return 1; + } + + // Not found, print '?' instead + lcd.write((uint8_t)'?'); + return 1; +} + +/** + * @brief Draw a UTF-8 string + * + * @param utf8_str : the UTF-8 string + * @param cb_read_byte : the callback function to read one byte from the utf8_str (from RAM or ROM) + * @param max_length : the pixel length of the string allowed (or number of slots in HD44780) + * + * @return the number of pixels advanced + * + * Draw a UTF-8 string + */ +static int lcd_put_u8str_max_cb(const char * utf8_str, uint8_t (*cb_read_byte)(uint8_t * str), pixel_len_t max_length) { + pixel_len_t ret = 0; + uint8_t *p = (uint8_t *)utf8_str; + while (ret < max_length) { + wchar_t ch = 0; + p = get_utf8_value_cb(p, cb_read_byte, &ch); + if (!ch) break; + ret += lcd_put_wchar_max(ch, max_length - ret); + } + return (int)ret; +} + +int lcd_put_u8str_max(const char * utf8_str, pixel_len_t max_length) { + return lcd_put_u8str_max_cb(utf8_str, read_byte_ram, max_length); +} + +int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length) { + return lcd_put_u8str_max_cb(utf8_str_P, read_byte_rom, max_length); +} + +#if ENABLED(DEBUG_LCDPRINT) + + int test_TFTGLCD_charmap(TFTGLCD_charmap_t *data, size_t size, char *name, char flg_show_contents) { + int ret; + size_t idx = 0; + TFTGLCD_charmap_t preval = {0, 0, 0}; + TFTGLCD_charmap_t pinval = {0, 0, 0}; + char flg_error = 0; + + int i; + + TRACE("Test %s\n", name); + + for (i = 0; i < size; i ++) { + memcpy_P(&pinval, &(data[i]), sizeof(pinval)); + + if (flg_show_contents) { + #if 1 + TRACE("[% 4d] % 6" PRIu32 "(0x%04" PRIX32 ") --> 0x%02X,0x%02X%s\n", i, pinval.uchar, pinval.uchar, (unsigned int)(pinval.idx), (unsigned int)(pinval.idx2), (preval.uchar < pinval.uchar?"":" <--- ERROR")); + #else + TRACE("[% 4d]", i); + TRACE("% 6" PRIu32 "(0x%04" PRIX32 "),", pinval.uchar, pinval.uchar); + TRACE("0x%02X,", (unsigned int)(pinval.idx)); + TRACE("0x%02X,", (unsigned int)(pinval.idx2)); + TRACE("%s", (preval.uchar < pinval.uchar?"":" <--- ERROR")); + #endif + } + if (preval.uchar >= pinval.uchar) { + flg_error = 1; + //TRACE("Error: out of order in array %s: idx=%d, val=%d(0x%x)\n", name, i, pinval.uchar, pinval.uchar); + //return -1; + } + memcpy(&preval, &pinval, sizeof(pinval)); + + ret = pf_bsearch_r((void *)data, size, pf_bsearch_cb_comp_hd4map_pgm, (void *)&pinval, &idx); + if (ret < 0) { + flg_error = 1; + TRACE("Error: not found item in array %s: idx=%d, val=%d(0x%x)\n", name, i, pinval.uchar, pinval.uchar); + //return -1; + } + if (idx != i) { + flg_error = 1; + TRACE("Error: wrong index found item in array %s: idx=%d, val=%d(0x%x)\n", name, i, pinval.uchar, pinval.uchar); + //return -1; + } + } + if (flg_error) { + TRACE("\nError: in array %s\n\n", name); + return -1; + } + TRACE("\nPASS array %s\n\n", name); + return 0; + } + + int test_TFTGLCD_charmap_all(void) { + int flg_error = 0; + if (test_TFTGLCD_charmap(g_TFTGLCD_charmap_device, COUNT(g_TFTGLCD_charmap_device), "g_TFTGLCD_charmap_device", 0) < 0) { + flg_error = 1; + test_TFTGLCD_charmap(g_TFTGLCD_charmap_device, COUNT(g_TFTGLCD_charmap_device), "g_TFTGLCD_charmap_device", 1); + } + if (test_TFTGLCD_charmap(g_TFTGLCD_charmap_common, COUNT(g_TFTGLCD_charmap_common), "g_TFTGLCD_charmap_common", 0) < 0) { + flg_error = 1; + test_TFTGLCD_charmap(g_TFTGLCD_charmap_common, COUNT(g_TFTGLCD_charmap_common), "g_TFTGLCD_charmap_common", 1); + } + if (flg_error) { + TRACE("\nFAILED in hd44780 tests!\n"); + return -1; + } + TRACE("\nPASS in hd44780 tests.\n"); + return 0; + } + +#endif // DEBUG_LCDPRINT + +#endif // IS_TFTGLCD_PANEL diff --git a/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp b/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp new file mode 100644 index 000000000000..fd1b6858e8f8 --- /dev/null +++ b/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.cpp @@ -0,0 +1,1018 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +#include "../../inc/MarlinConfigPre.h" + +#if IS_TFTGLCD_PANEL + +/** + * ultralcd_TFTGLCD.cpp + * + * Implementation of the LCD display routines for a TFT GLCD displays with external controller. + * This display looks as a REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER but has good text font + * and supports color output. + */ + +#if NONE(__AVR__, MCU_LPC1768, __STM32F1__, STM32F4xx) + #warning "Selected platform not yet tested. Please contribute your good pin mappings." +#endif + +#if ENABLED(TFTGLCD_PANEL_SPI) + #include +#else + #include +#endif + +#include "ultralcd_TFTGLCD.h" +#include "../ultralcd.h" +#include "../../libs/numtostr.h" + +#include "../../sd/cardreader.h" +#include "../../module/temperature.h" +#include "../../module/printcounter.h" +#include "../../module/planner.h" +#include "../../module/motion.h" + +#if DISABLED(LCD_PROGRESS_BAR) && BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT) + #include "../../feature/filwidth.h" + #include "../../gcode/parser.h" +#endif + +#if ENABLED(AUTO_BED_LEVELING_UBL) + #include "../../feature/bedlevel/bedlevel.h" +#endif + +TFTGLCD lcd; + +#define ICON_LOGO B00000001 +#define ICON_TEMP1 B00000010 //hotend 1 +#define ICON_TEMP2 B00000100 //hotend 2 +#define ICON_TEMP3 B00001000 //hotend 3 +#define ICON_BED B00010000 +#define ICON_FAN B00100000 +#define ICON_HOT B01000000 //when any T > 50deg +#define PIC_MASK 0x7f + +//LEDs not used, for compatibility with Smoothieware +#define LED_HOTEND_ON B00000001 +#define LED_BED_ON B00000010 +#define LED_FAN_ON B00000100 +#define LED_HOT B00001000 +#define LED_MASK 0x0f + +#define FBSIZE (LCD_WIDTH * LCD_HEIGHT + 2) + +//markers for change line color +#define COLOR_EDIT '#' +#define COLOR_ERROR '!' + +#ifdef CONVERT_TO_EXT_ASCII //use standart pseudographic symbols in ASCII table + #define LR 179 //vertical line + #define TRC 191 //top right corner + #define BLC 192 //bottom left corner + #define GL 196 //horizontal line + #define BRC 217 //bottom right corner, should be replaced to 12 for some languages + #define TLC 218 //top left corner, should be replaced to 13 for some languages +#else //next symbols must be present in panel font + #define LR 8 //equal to 179 + #define TRC 9 //equal to 191 + #define BLC 10 //equal to 192 + #define GL 11 //equal to 196 + #define BRC 12 //equal to 217 + #define TLC 13 //equal to 218 +#endif + +#define Marlin 0x01 + +enum Commands { // based on Smoothieware commands + GET_SPI_DATA = 0, + READ_BUTTONS, // read buttons + READ_ENCODER, // read encoder + LCD_WRITE, // write all screen to LCD + BUZZER, // beep buzzer + CONTRAST, // set contrast (brightnes) + // Other commands... 0xE0 thru 0xFF + GET_LCD_ROW = 0xE0, // for detect panel + GET_LCD_COL, // reserved for compatibility with Smoothieware, not used + LCD_PUT, // write one line to LCD + INIT_SCREEN = 0xFE, // clear panel buffer +}; + +static unsigned char framebuffer[FBSIZE]; +static unsigned char *fb; +static uint8_t cour_line; +static uint8_t picBits, ledBits, hotBits; +static uint8_t PanelDetected = 0; + +// Constructor +TFTGLCD::TFTGLCD() {} + +//clearing local buffer +void TFTGLCD::clear_buffer() { + memset(&framebuffer[0], ' ', FBSIZE - 2); + framebuffer[FBSIZE - 1] = framebuffer[FBSIZE - 2] = 0; + picBits = ledBits = 0; +} + +//set new text cursor position +void TFTGLCD::setCursor(uint8_t col, uint8_t row) { + fb = &framebuffer[0] + col + row * LCD_WIDTH; + cour_line = row; +} + +//send char to buffer +void TFTGLCD::write(char c) { + *fb++ = c; +} + +//send text line to buffer +void TFTGLCD::print(const char *line) { + while (*line) *fb++ = *line++; +} + +// For menu +void TFTGLCD::print_line() { + if (!PanelDetected) return; + #if ENABLED(TFTGLCD_PANEL_SPI) + WRITE(TFTGLCD_CS, LOW); + #ifdef __AVR__ + SPI.transfer(LCD_PUT); + SPI.transfer(cour_line); + SPI.transfer(&framebuffer[cour_line * LCD_WIDTH], LCD_WIDTH); + #elif EITHER(MCU_LPC1768, __STM32F1__) + SPI.transfer(LCD_PUT); + SPI.transfer(cour_line); + for (uint16_t i = 0; i < LCD_WIDTH; i++) SPI.transfer(framebuffer[cour_line * LCD_WIDTH + i]); + #elif defined(STM32F4xx) + SPI.transfer(LCD_PUT, SPI_CONTINUE); + SPI.transfer(cour_line, SPI_CONTINUE); + SPI.transfer(&framebuffer[cour_line * LCD_WIDTH], LCD_WIDTH, SPI_CONTINUE); + #elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__) + SPI.transfer(LCD_PUT); + SPI.transfer(cour_line); + SPI.transfer(&framebuffer[cour_line * LCD_WIDTH], LCD_WIDTH); + #elif defined(ARDUINO_ARCH_ESP32) + SPI.write(LCD_PUT); + SPI.write(cour_line); + for (uint16_t i = 0; i < LCD_WIDTH; i++) SPI.write(framebuffer[cour_line * LCD_WIDTH + i]); + #endif + WRITE(TFTGLCD_CS, HIGH); + #else + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); //set I2C device address + Wire.write(LCD_PUT); + Wire.write(cour_line); + Wire.write(&framebuffer[cour_line * LCD_WIDTH], LCD_WIDTH); //transfer 1 line to txBuffer + Wire.endTransmission(); //transmit data + safe_delay(1); + #endif +} + +void TFTGLCD::print_screen(){ + if (!PanelDetected) return; + framebuffer[FBSIZE - 2] = picBits & PIC_MASK; + framebuffer[FBSIZE - 1] = ledBits; + #if ENABLED(TFTGLCD_PANEL_SPI) + // Send all framebuffer to panel + WRITE(TFTGLCD_CS, LOW); + #ifdef __AVR__ + SPI.transfer(LCD_WRITE); + SPI.transfer(&framebuffer[0], FBSIZE); + #elif EITHER(MCU_LPC1768, __STM32F1__) + SPI.transfer(LCD_WRITE); + for (uint16_t i = 0; i < FBSIZE; i++) SPI.transfer(framebuffer[i]); + #elif defined(STM32F4xx) + SPI.transfer(LCD_WRITE, SPI_CONTINUE); + SPI.transfer(&framebuffer[0], FBSIZE, SPI_CONTINUE); + #elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__) + SPI.transfer(LCD_WRITE); + SPI.transfer(&framebuffer[0], FBSIZE); + #elif defined(ARDUINO_ARCH_ESP32) + SPI.write(LCD_WRITE); + for (uint16_t i = 0; i < FBSIZE; i++) SPI.write(framebuffer[i]); + #endif + WRITE(TFTGLCD_CS, HIGH); + #else + uint8_t r; + // Send framebuffer to panel by line + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); + // First line + Wire.write(LCD_WRITE); + Wire.write(&framebuffer[0], LCD_WIDTH); + Wire.endTransmission(); + for (r = 1; r < (LCD_HEIGHT - 1); r++) { + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); + Wire.write(&framebuffer[r * LCD_WIDTH], LCD_WIDTH); + Wire.endTransmission(); + } + // Last line + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); + Wire.write(&framebuffer[r * LCD_WIDTH], LCD_WIDTH); + Wire.write(&framebuffer[FBSIZE - 2], 2); + Wire.endTransmission(); + #endif +} + +void TFTGLCD::setContrast(uint16_t contrast) { + if (!PanelDetected) return; + #if ENABLED(TFTGLCD_PANEL_SPI) + WRITE(TFTGLCD_CS, LOW); + #if ANY(__AVR__, MCU_LPC1768, __STM32F1__) + SPI.transfer(CONTRAST); + SPI.transfer((uint8_t)contrast); + #elif defined(STM32F4xx) + SPI.transfer(CONTRAST, SPI_CONTINUE); + SPI.transfer((uint8_t)contrast, SPI_CONTINUE); + #elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__) + SPI.transfer(CONTRAST); + SPI.transfer((uint8_t)contrast); + #elif defined(ARDUINO_ARCH_ESP32) + SPI.write(CONTRAST); + SPI.write((uint8_t)contrast); + #endif + WRITE(TFTGLCD_CS, HIGH); + #else + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); + Wire.write(CONTRAST); + Wire.write((uint8_t)contrast); + Wire.endTransmission(); + #endif +} + +//reading buttons and encoder states +extern volatile int8_t encoderDiff; + +uint8_t MarlinUI::read_slow_buttons(void) { + if (!PanelDetected) return 0; + #if ENABLED(TFTGLCD_PANEL_SPI) + uint8_t b = 0; + WRITE(TFTGLCD_CS, LOW); + #if ANY(__AVR__, MCU_LPC1768, __STM32F1__) + SPI.transfer(READ_ENCODER); + WRITE(TFTGLCD_CS, LOW); //for delay + encoderDiff += SPI.transfer(READ_BUTTONS); + WRITE(TFTGLCD_CS, LOW); //for delay + b = SPI.transfer(GET_SPI_DATA); + #elif defined(STM32F4xx) + SPI.transfer(READ_ENCODER, SPI_CONTINUE); + encoderDiff += SPI.transfer(READ_BUTTONS, SPI_CONTINUE); + b = SPI.transfer(GET_SPI_DATA, SPI_CONTINUE); + #elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__) + SPI.transfer(READ_ENCODER); + WRITE(TFTGLCD_CS, LOW); //for delay ???? + encoderDiff += SPI.transfer(READ_BUTTONS); + WRITE(TFTGLCD_CS, LOW); //for delay ???? + b = SPI.transfer(GET_SPI_DATA); + #elif defined(ARDUINO_ARCH_ESP32) + SPI.transfer(READ_ENCODER); + WRITE(TFTGLCD_CS, LOW); //for delay ???? + encoderDiff += SPI.transfer(READ_BUTTONS); + WRITE(TFTGLCD_CS, LOW); //for delay ???? + b = SPI.transfer(GET_SPI_DATA); + #endif + WRITE(TFTGLCD_CS, HIGH); + return b; + #else + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); + Wire.write(READ_ENCODER); + Wire.endTransmission(); + #ifdef __AVR__ + Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, 2, 0, 0, 1); + #elif defined(__STM32F1__) + Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, (uint8_t)2); + #elif EITHER(STM32F4xx, MCU_LPC1768) + Wire.requestFrom(LCD_I2C_ADDRESS, 2); + #endif + encoderDiff += Wire.read(); + return Wire.read(); //buttons + #endif +} + +// duration in ms, freq in Hz +void MarlinUI::buzz(const long duration, const uint16_t freq) { + if (!PanelDetected) return; + #if ENABLED(TFTGLCD_PANEL_SPI) + WRITE(TFTGLCD_CS, LOW); + #if ANY(__AVR__, MCU_LPC1768, __STM32F1__) + SPI.transfer(BUZZER); + SPI.transfer16((uint16_t)duration); + SPI.transfer16(freq); + #elif defined(STM32F4xx) + SPI.transfer(BUZZER, SPI_CONTINUE); + SPI.transfer16((uint16_t)duration, SPI_CONTINUE); + SPI.transfer16(freq, SPI_CONTINUE); + #elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__) + SPI.transfer(BUZZER); + SPI.transfer16((uint16_t)duration); + SPI.transfer16(freq); + #elif defined(ARDUINO_ARCH_ESP32) + SPI.write(BUZZER); + SPI.write16((uint16_t)duration); + SPI.write16(freq); + #endif + WRITE(TFTGLCD_CS, HIGH); + #else + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); + Wire.write(BUZZER); + Wire.write((uint8_t)(duration >> 8)); + Wire.write((uint8_t)duration); + Wire.write((uint8_t)(freq >> 8)); + Wire.write((uint8_t)freq); + Wire.endTransmission(); + #endif +} + +void MarlinUI::init_lcd() { + uint8_t t; + lcd.clear_buffer(); + t = 0; + #if ENABLED(TFTGLCD_PANEL_SPI) + // SPI speed must be less 10MHz + OUT_WRITE(TFTGLCD_CS, HIGH); + spiInit(TERN(__STM32F1__, SPI_QUARTER_SPEED, SPI_FULL_SPEED)); + WRITE(TFTGLCD_CS, LOW); + #if ANY(__AVR__, MCU_LPC1768, __STM32F1__) + SPI.transfer(GET_LCD_ROW); + t = SPI.transfer(GET_SPI_DATA); + #elif defined(STM32F4xx) + SPI.transfer(GET_LCD_ROW, SPI_CONTINUE); + t = SPI.transfer(GET_SPI_DATA, SPI_CONTINUE); + #elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__) + SPI.transfer(GET_LCD_ROW); + t = SPI.transfer(GET_SPI_DATA); + #elif defined(ARDUINO_ARCH_ESP32) + SPI.write(GET_LCD_ROW); + t = SPI.transfer(GET_SPI_DATA); + #endif + #else + #ifdef MCU_LPC1768 + Wire.begin(); //init twi/I2C + #else + Wire.begin((uint8_t)LCD_I2C_ADDRESS); //init twi/I2C + #endif + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); + Wire.write((uint8_t)GET_LCD_ROW); // put command to buffer + Wire.endTransmission(); // send buffer + #ifdef __AVR__ + Wire.requestFrom((uint8_t)LCD_I2C_ADDRESS, 1, 0, 0, 1); + #elif ANY(__STM32F1__, STM32F4xx, MCU_LPC1768) + Wire.requestFrom(LCD_I2C_ADDRESS, 1); + #endif + t = (uint8_t)Wire.read(); + #endif + + if (t == LCD_HEIGHT) { + PanelDetected = 1; + #if ENABLED(TFTGLCD_PANEL_SPI) + PanelDetected = 1; + #if ANY(__AVR__, MCU_LPC1768, __STM32F1__) + SPI.transfer(INIT_SCREEN); + SPI.transfer(Marlin); + #elif defined(STM32F4xx) + SPI.transfer(INIT_SCREEN, SPI_CONTINUE); + SPI.transfer(Marlin, SPI_CONTINUE); + #elif ANY(ARDUINO_ARCH_SAM, __SAMD51__, __MK20DX256__, __MK64FX512__) + SPI.transfer(INIT_SCREEN); + SPI.transfer(Marlin); + #elif defined(ARDUINO_ARCH_ESP32) + SPI.write(INIT_SCREEN); + SPI.write(Marlin); + #endif + WRITE(TFTGLCD_CS, HIGH); + #else + Wire.beginTransmission((uint8_t)LCD_I2C_ADDRESS); + Wire.write((uint8_t)INIT_SCREEN); + Wire.write(Marlin); + Wire.endTransmission(); + #endif + } + else + PanelDetected = 0; + safe_delay(100); +} + +bool MarlinUI::detected() { + return PanelDetected; +} + +void MarlinUI::clear_lcd() { + if (!PanelDetected) return; + lcd.clear_buffer(); + lcd.print_screen(); +} + +int16_t MarlinUI::contrast; // Initialized by settings.load() + +void MarlinUI::set_contrast(const int16_t value) { + contrast = constrain(value, LCD_CONTRAST_MIN, LCD_CONTRAST_MAX); + lcd.setContrast(contrast); +} + +static void center_text_P(PGM_P pstart, uint8_t y) { + uint8_t len = utf8_strlen_P(pstart); + if (len < LCD_WIDTH) + lcd.setCursor((LCD_WIDTH - len) / 2, y); + else + lcd.setCursor(0, y); + lcd_put_u8str_P(pstart); +} + +#if ENABLED(SHOW_BOOTSCREEN) + + void MarlinUI::show_bootscreen() { + if (!PanelDetected) return; + // + // Show the Marlin logo, splash line1, and splash line 2 + // + uint8_t indent = (LCD_WIDTH - 8) / 2; + // symbols 217 (bottom right corner) and 218 (top left corner) are using for letters in some languages + // and they should be moved to begining ASCII table as spetial symbols + lcd.setCursor(indent, 0); lcd.write(TLC); lcd_put_u8str_P(PSTR("------")); lcd.write(TRC); + lcd.setCursor(indent, 1); lcd.write(LR); lcd_put_u8str_P(PSTR("Marlin")); lcd.write(LR); + lcd.setCursor(indent, 2); lcd.write(BLC); lcd_put_u8str_P(PSTR("------")); lcd.write(BRC); + center_text_P(PSTR(SHORT_BUILD_VERSION), 3); + center_text_P(PSTR(MARLIN_WEBSITE_URL), 4); + picBits = ICON_LOGO; + lcd.print_screen(); + safe_delay(1500); + } + +#endif // SHOW_BOOTSCREEN + +void MarlinUI::draw_kill_screen() { + if (!PanelDetected) return; + lcd.clear_buffer(); + lcd.setCursor(0, 3); lcd.write(COLOR_ERROR); + lcd.setCursor((LCD_WIDTH - utf8_strlen(status_message)) / 2 + 1, 3); + lcd_put_u8str(status_message); + center_text_P(GET_TEXT(MSG_HALTED), 5); + center_text_P(GET_TEXT(MSG_PLEASE_RESET), 6); + lcd.print_screen(); +} + +// +// Before homing, blink '123' <-> '???'. +// Homed but unknown... '123' <-> ' '. +// Homed and known, display constantly. +// +FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const bool blink) { + lcd.write('X' + uint8_t(axis)); + if (blink) + lcd.print(value); + else { + if (!TEST(axis_homed, axis)) + while (const char c = *value++) lcd.write(c <= '.' ? c : '?'); + else { + #if NONE(HOME_AFTER_DEACTIVATE, DISABLE_REDUCED_ACCURACY_WARNING) + if (!TEST(axis_known_position, axis)) + lcd_put_u8str_P(axis == Z_AXIS ? PSTR(" ") : PSTR(" ")); + else + #endif + lcd_put_u8str(value); + } + } +} + +FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char *prefix, const bool blink) { + uint8_t pic_hot_bits; + #if HAS_HEATED_BED + const bool isBed = heater_id < 0; + const float t1 = (isBed ? thermalManager.degBed() : thermalManager.degHotend(heater_id)); + const float t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id)); + #else + const float t1 = thermalManager.degHotend(heater_id); + const float t2 = thermalManager.degTargetHotend(heater_id); + #endif + + #if HOTENDS < 2 + if (heater_id == H_E0) { + lcd.setCursor(2, 5); lcd.print(prefix); //HE + lcd.setCursor(1, 6); lcd.print(i16tostr3rj(t1 + 0.5)); + lcd.setCursor(1, 7); + } + else { + lcd.setCursor(6, 5); lcd.print(prefix); //BED + lcd.setCursor(6, 6); lcd.print(i16tostr3rj(t1 + 0.5)); + lcd.setCursor(6, 7); + } + #else + if (heater_id > H_BED) { + lcd.setCursor(heater_id * 4, 5); lcd.print(prefix); //HE1 or HE2 or HE3 + lcd.setCursor(heater_id * 4, 6); lcd.print(i16tostr3rj(t1 + 0.5)); + lcd.setCursor(heater_id * 4, 7); + } + else { + lcd.setCursor(13, 5); lcd.print(prefix); //BED + lcd.setCursor(13, 6); lcd.print(i16tostr3rj(t1 + 0.5)); + lcd.setCursor(13, 7); + } + #endif // HOTENDS <= 1 + + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #else + if (!blink && thermalManager.heater_idle[thermalManager.idle_index_for_id(heater_id)].timed_out) { + lcd.write(' '); + if (t2 >= 10) lcd.write(' '); + if (t2 >= 100) lcd.write(' '); + } + else + #endif // !HEATER_IDLE_HANDLER + lcd.print(i16tostr3rj(t2 + 0.5)); + + switch (heater_id) { + case H_BED: pic_hot_bits = ICON_BED; break; + case H_E0: pic_hot_bits = ICON_TEMP1; break; + case H_E1: pic_hot_bits = ICON_TEMP2; break; + case H_E2: pic_hot_bits = ICON_TEMP3; + default: break; + } + + if (t2) picBits |= pic_hot_bits; + else picBits &= ~pic_hot_bits; + + if (t1 > 50) hotBits |= pic_hot_bits; + else hotBits &= ~pic_hot_bits; + + if (hotBits) picBits |= ICON_HOT; + else picBits &= ~ICON_HOT; +} + +#if HAS_PRINT_PROGRESS + + FORCE_INLINE void _draw_print_progress() { + if (!PanelDetected) return; + const uint8_t progress = ui._get_progress(); + #if ENABLED(SDSUPPORT) + lcd_put_u8str_P(PSTR("SD")); + #elif ENABLED(LCD_SET_PROGRESS_MANUALLY) + lcd_put_u8str_P(PSTR("P:")); + #endif + if (progress) + lcd.print(ui8tostr3rj(progress)); + else + lcd_put_u8str_P(PSTR("---")); + lcd.write('%'); + } + +#endif // HAS_PRINT_PROGRESS + +#if ENABLED(LCD_PROGRESS_BAR) + + void MarlinUI::draw_progress_bar(const uint8_t percent) { + if (!PanelDetected) return; + if (fb == &framebuffer[0] + LCD_WIDTH * 2) { // For status screen + lcd.write('%'); lcd.write(percent); + } + else { // For progress bar test + lcd.setCursor(LCD_WIDTH / 2 - 2, LCD_HEIGHT / 2 - 2); + lcd.print(i16tostr3rj(percent)); lcd.write('%'); + lcd.print_line(); + lcd.setCursor(0, LCD_HEIGHT / 2 - 1); + lcd.write('%'); lcd.write(percent); + lcd.print_line(); + } + } + +#endif + +void MarlinUI::draw_status_message(const bool blink) { + if (!PanelDetected) return; + lcd.setCursor(0, 3); + #if BOTH(FILAMENT_LCD_DISPLAY, SDSUPPORT) + + // Alternate Status message and Filament display + if (ELAPSED(millis(), next_filament_display)) { + lcd_put_u8str_P(PSTR("Dia ")); + lcd.print(ftostr12ns(filament_width_meas)); + lcd_put_u8str_P(PSTR(" V")); + lcd.print(i16tostr3rj(100.0 * ( + parser.volumetric_enabled + ? planner.volumetric_area_nominal / planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] + : planner.volumetric_multiplier[FILAMENT_SENSOR_EXTRUDER_NUM] + ) + )); + lcd.write('%'); + return; + } + + #endif // FILAMENT_LCD_DISPLAY && SDSUPPORT + + // Get the UTF8 character count of the string + uint8_t slen = utf8_strlen(status_message); + + #if ENABLED(STATUS_MESSAGE_SCROLLING) + + static bool last_blink = false; + + // If the string fits into the LCD, just print it and do not scroll it + if (slen <= LCD_WIDTH) { + + // The string isn't scrolling and may not fill the screen + lcd_put_u8str(status_message); + + // Fill the rest with spaces + while (slen < LCD_WIDTH) { lcd.write(' '); ++slen; } + } + else { + // String is larger than the available space in screen. + + // Get a pointer to the next valid UTF8 character + // and the string remaining length + uint8_t rlen; + const char *stat = status_and_len(rlen); + lcd_put_u8str_max(stat, LCD_WIDTH); // The string leaves space + + // If the remaining string doesn't completely fill the screen + if (rlen < LCD_WIDTH) { + lcd.write('.'); // Always at 1+ spaces left, draw a dot + uint8_t chars = LCD_WIDTH - rlen; // Amount of space left in characters + if (--chars) { // Draw a second dot if there's space + lcd.write('.'); + if (--chars) + lcd_put_u8str_max(status_message, chars); // Print a second copy of the message + } + } + if (last_blink != blink) { + last_blink = blink; + advance_status_scroll(); + } + } + + #else + + UNUSED(blink); + + // Just print the string to the LCD + lcd_put_u8str_max(status_message, LCD_WIDTH); + + // Fill the rest with spaces if there are missing spaces + while (slen < LCD_WIDTH) { + lcd.write(' '); + ++slen; + } + + #endif +} + +/** +Possible status screens: + +Equal to 20x10 text LCD + +|X 000 Y 000 Z 000.00| +|FR100% SD100% C--:--| +| Progress bar line | +|Status message | +| | +| HE BED FAN | +| ttc ttc % | ttc - current temperature +| tts tts %%% | tts - setted temperature, %%% - percent for FAN +| ICO ICO ICO ICO | ICO - icon 48x48, placed in 2 text lines +| ICO ICO ICO ICO | ICO / + +or + +|X 000 Y 000 Z 000.00| +|FR100% SD100% C--:--| +| Progress bar line | +|Status message | +| | +|HE1 HE2 HE3 BED ICO| +|ttc ttc ttc ttc ICO| +|tts tts tts tts %%%| +|ICO ICO ICO ICO ICO| +|ICO ICO ICO ICO ICO| + +or + +Equal to 24x10 text LCD + +|X 000 Y 000 Z 000.00 | +|FR100% SD100% C--:--| +| Progress bar line | +|Status message | +| | +|HE1 HE2 HE3 BED FAN | +|ttc ttc ttc ttc % | +|tts tts tts tts %%% | +|ICO ICO ICO ICO ICO ICO| +|ICO ICO ICO ICO ICO ICO| +*/ + +void MarlinUI::draw_status_screen() { + if (!PanelDetected) return; + + const bool blink = get_blink(); + + lcd.clear_buffer(); + + // + // Line 1 - XYZ coordinates + // + + lcd.setCursor(0, 0); + _draw_axis_value(X_AXIS, ftostr4sign(LOGICAL_X_POSITION(current_position[X_AXIS])), blink); lcd.write(' '); + _draw_axis_value(Y_AXIS, ftostr4sign(LOGICAL_Y_POSITION(current_position[Y_AXIS])), blink); lcd.write(' '); + _draw_axis_value(Z_AXIS, ftostr52sp(LOGICAL_Z_POSITION(current_position[Z_AXIS])), blink); + + #if HAS_LEVELING && !HAS_HEATED_BED + lcd.write(planner.leveling_active || blink ? '_' : ' '); + #endif + + // + // Line 2 - feedrate, , time + // + + lcd.setCursor(0, 1); + lcd_put_u8str_P(PSTR("FR")); lcd.print(i16tostr3rj(feedrate_percentage)); lcd.write('%'); + + #if BOTH(SDSUPPORT, HAS_PRINT_PROGRESS) + lcd.setCursor(LCD_WIDTH / 2 - 3, 1); + _draw_print_progress(); + #endif + + char buffer[10]; + duration_t elapsed = print_job_timer.duration(); + uint8_t len = elapsed.toDigital(buffer); + + lcd.setCursor((LCD_WIDTH - 1) - len, 1); + lcd.write(0x07); lcd.print(buffer); // LCD_CLOCK_CHAR + + // + // Line 3 - progressbar + // + + lcd.setCursor(0, 2); + #if ENABLED(LCD_PROGRESS_BAR) + draw_progress_bar(_get_progress()); + #else + lcd.write('%'); lcd.write(0); + #endif + + // + // Line 4 - Status Message (which may be a Filament display) + // + + draw_status_message(blink); + + // + // Line 5 + // + + #if HOTENDS <= 1 || (HOTENDS <= 2 && !HAS_HEATED_BED) + #if DUAL_MIXING_EXTRUDER + lcd.setCursor(0, 4); + // Two-component mix / gradient instead of XY + char mixer_messages[12]; + const char *mix_label; + #if ENABLED(GRADIENT_MIX) + if (mixer.gradient.enabled) { + mixer.update_mix_from_gradient(); + mix_label = "Gr"; + } + else + #endif + { + mixer.update_mix_from_vtool(); + mix_label = "Mx"; + } + sprintf_P(mixer_messages, PSTR("%s %d;%d%% "), mix_label, int(mixer.mix[0]), int(mixer.mix[1])); + lcd_put_u8str(mixer_messages); + #endif + #endif + + // + // Line 6..8 Temperatures, FAN + // + + #if HOTENDS < 2 + _draw_heater_status(H_E0, "HE", blink); // Hotend Temperature + #else + _draw_heater_status(H_E0, "HE1", blink); // Hotend 1 Temperature + _draw_heater_status(H_E1, "HE2", blink); // Hotend 2 Temperature + #if HOTENDS > 2 + _draw_heater_status(H_E2, "HE3", blink); // Hotend 3 Temperature + #endif + #endif // HOTENDS <= 1 + + #if HAS_HEATED_BED + #if HAS_LEVELING + _draw_heater_status(H_BED, (planner.leveling_active && blink ? "___" : "BED"), blink); + #else + _draw_heater_status(H_BED, "BED", blink); + #endif + #endif // HAS_HEATED_BED + + #if FAN_COUNT > 0 + uint16_t spd = thermalManager.fan_speed[0]; + + #if ENABLED(ADAPTIVE_FAN_SLOWING) + if (!blink) spd = thermalManager.scaledFanSpeed(0, spd); + #endif + + uint16_t per = thermalManager.fanPercent(spd); + #if HOTENDS < 2 + #define FANX 11 + #else + #define FANX 17 + #endif + lcd.setCursor(FANX, 5); lcd_put_u8str_P(PSTR("FAN")); + lcd.setCursor(FANX + 1, 6); lcd.write('%'); + lcd.setCursor(FANX, 7); + lcd.print(i16tostr3rj(per)); + + if (TERN0(HAS_FAN0, thermalManager.fan_speed[0]) || TERN0(HAS_FAN1, thermalManager.fan_speed[1]) || TERN0(HAS_FAN2, thermalManager.fan_speed[2])) + picBits |= ICON_FAN; + else + picBits &= ~ICON_FAN; + + #endif // FAN_COUNT > 0 + + // + // Line 9, 10 - icons + // + lcd.print_screen(); +} + +#if HAS_LCD_MENU + + #include "../menu/menu.h" + + #if ENABLED(ADVANCED_PAUSE_FEATURE) + + void MarlinUI::draw_hotend_status(const uint8_t row, const uint8_t extruder) { + if (!PanelDetected) return; + lcd.setCursor((LCD_WIDTH - 14) / 2, row + 1); + lcd.write(0x02); lcd_put_u8str_P(" E"); lcd.write('1' + extruder); lcd.write(' '); + lcd.print(i16tostr3rj(thermalManager.degHotend(extruder))); lcd.write(0x01); lcd.write('/'); + lcd.print(i16tostr3rj(thermalManager.degTargetHotend(extruder))); lcd.write(0x01); + lcd.print_line(); + } + + #endif // ADVANCED_PAUSE_FEATURE + + // Draw a static item with no left-right margin required. Centered by default. + void MenuItem_static::draw(const uint8_t row, PGM_P const pstr, const uint8_t style/*=SS_DEFAULT*/, const char * const valstr/*=nullptr*/) { + if (!PanelDetected) return; + uint8_t n = LCD_WIDTH; + lcd.setCursor(0, row); + if ((style & SS_CENTER) && !valstr) { + int8_t pad = (LCD_WIDTH - utf8_strlen_P(pstr)) / 2; + while (--pad >= 0) { lcd.write(' '); n--; } + } + n = lcd_put_u8str_ind_P(pstr, itemIndex, itemString, n); + if (valstr) n -= lcd_put_u8str_max(valstr, n); + for (; n; --n) lcd.write(' '); + lcd.print_line(); + } + + // Draw a generic menu item with pre_char (if selected) and post_char + void MenuItemBase::_draw(const bool sel, const uint8_t row, PGM_P const pstr, const char pre_char, const char post_char) { + if (!PanelDetected) return; + lcd.setCursor(0, row); + lcd.write(sel ? pre_char : ' '); + uint8_t n = lcd_put_u8str_ind_P(pstr, itemIndex, itemString, LCD_WIDTH - 2); + for (; n; --n) lcd.write(' '); + lcd.write(post_char); + lcd.print_line(); + } + + // Draw a menu item with a (potentially) editable value + void MenuEditItemBase::draw(const bool sel, const uint8_t row, PGM_P const pstr, const char* const data, const bool pgm) { + if (!PanelDetected) return; + const uint8_t vlen = data ? (pgm ? utf8_strlen_P(data) : utf8_strlen(data)) : 0; + lcd.setCursor(0, row); + lcd.write(sel ? LCD_STR_ARROW_RIGHT[0] : ' '); + uint8_t n = lcd_put_u8str_ind_P(pstr, itemIndex, itemString, LCD_WIDTH - 2 - vlen); + if (vlen) { + lcd.write(':'); + for (; n; --n) lcd.write(' '); + if (pgm) lcd_put_u8str_P(data); else lcd_put_u8str(data); + } + lcd.print_line(); + } + + // Low-level draw_edit_screen can be used to draw an edit screen from anyplace + void MenuEditItemBase::draw_edit_screen(PGM_P const pstr, const char* const value/*=nullptr*/) { + if (!PanelDetected) return; + ui.encoder_direction_normal(); + lcd.setCursor(0, LCD_HEIGHT - 1); //last line is free most time + lcd.write(COLOR_EDIT); + lcd_put_u8str_P(pstr); + if (value != nullptr) { + lcd.write(':'); + lcd.setCursor((LCD_WIDTH - 1) - (utf8_strlen(value) + 1), LCD_HEIGHT - 1); // Right-justified, padded by spaces + lcd.write(' '); // Overwrite char if value gets shorter + lcd.print(value); + lcd.write(' '); + lcd.print_line(); + } + } + + // The Select Screen presents a prompt and two "buttons" + void MenuItem_confirm::draw_select_screen(PGM_P const yes, PGM_P const no, const bool yesno, PGM_P const pref, const char * const string, PGM_P const suff) { + if (!PanelDetected) return; + ui.draw_select_screen_prompt(pref, string, suff); + lcd.setCursor(0, LCD_HEIGHT - 1); + lcd.write(COLOR_EDIT); + lcd.write(yesno ? ' ' : '['); lcd_put_u8str_P(no); lcd.write(yesno ? ' ' : ']'); + lcd.setCursor(LCD_WIDTH - utf8_strlen_P(yes) - 3, LCD_HEIGHT - 1); + lcd.write(yesno ? '[' : ' '); lcd_put_u8str_P(yes); lcd.write(yesno ? ']' : ' '); + lcd.print_line(); + } + + #if ENABLED(SDSUPPORT) + + void MenuItem_sdbase::draw(const bool sel, const uint8_t row, PGM_P const, CardReader &theCard, const bool isDir) { + if (!PanelDetected) return; + lcd.setCursor(0, row); + lcd.write(sel ? LCD_STR_ARROW_RIGHT[0] : ' '); + constexpr uint8_t maxlen = LCD_WIDTH - 2; + uint8_t n = maxlen - lcd_put_u8str_max(ui.scrolled_filename(theCard, maxlen, row, sel), maxlen); + for (; n; --n) lcd.write(' '); + lcd.write(isDir ? LCD_STR_FOLDER[0] : ' '); + lcd.print_line(); + } + + #endif // SDSUPPORT + + #if ENABLED(LCD_HAS_STATUS_INDICATORS) + + void MarlinUI::update_indicators() {} + + #endif // LCD_HAS_STATUS_INDICATORS + + #if ENABLED(AUTO_BED_LEVELING_UBL) + /** + * Map screen: + * |/---------\ (00,00) | + * || . . . . | X:000.00| + * || . . . . | Y:000.00| + * || . . . . | Z:00.000| + * || . . . . | | + * || . . . . | | + * || . . . . | | + * |+---------/ | + * | | + * |____________________| + */ + void MarlinUI::ubl_plot(const uint8_t x_plot, const uint8_t y_plot) { + if (!PanelDetected) return; + + #define _LCD_W_POS 12 + + lcd.clear_buffer(); + + //print only top left corner. All frame with grid points will be printed by panel + lcd.setCursor(0, 0); + *fb++ = TLC; //top left corner - marker for plot parameters + *fb = (GRID_MAX_POINTS_X << 4) + GRID_MAX_POINTS_Y; //set mesh size + + // Print plot position + lcd.setCursor(_LCD_W_POS, 0); + *fb++ = '('; lcd.print(i16tostr3left(x_plot)); + *fb++ = ','; lcd.print(i16tostr3left(y_plot)); *fb = ')'; + + // Show all values + lcd.setCursor(_LCD_W_POS, 1); lcd_put_u8str_P(PSTR("X:")); + lcd.print(ftostr52(LOGICAL_X_POSITION(pgm_read_float(&ubl._mesh_index_to_xpos[x_plot])))); + lcd.setCursor(_LCD_W_POS, 2); lcd_put_u8str_P(PSTR("Y:")); + lcd.print(ftostr52(LOGICAL_Y_POSITION(pgm_read_float(&ubl._mesh_index_to_ypos[y_plot])))); + + // Show the location value + lcd.setCursor(_LCD_W_POS, 3); lcd_put_u8str_P(PSTR("Z:")); + + if (!isnan(ubl.z_values[x_plot][y_plot])) + lcd.print(ftostr43sign(ubl.z_values[x_plot][y_plot])); + else + lcd_put_u8str_P(PSTR(" -----")); + + center_text_P(GET_TEXT(MSG_UBL_FINE_TUNE_MESH), 8); + + lcd.print_screen(); + } + + #endif // AUTO_BED_LEVELING_UBL + +#endif // HAS_LCD_MENU + +#endif // IS_TFTGLCD_PANEL diff --git a/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.h b/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.h new file mode 100644 index 000000000000..9f54730c3c89 --- /dev/null +++ b/Marlin/src/lcd/TFTGLCD/ultralcd_TFTGLCD.h @@ -0,0 +1,74 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * Implementation of the LCD display routines for a TFT GLCD displays with external controller. + */ + +#include "../../inc/MarlinConfig.h" + +#if IS_TFTGLCD_PANEL + +#include "../../libs/duration_t.h" + +//////////////////////////////////// +// Set up button and encode mappings for each panel (into 'buttons' variable) +// +// This is just to map common functions (across different panels) onto the same +// macro name. The mapping is independent of whether the button is directly connected or +// via a shift/i2c register. + +//////////////////////////////////// +// Create LCD class instance and chipset-specific information +class TFTGLCD { + private: + public: + TFTGLCD(); + void clear_buffer(); + void setCursor(uint8_t col, uint8_t row); + void write(char c); + void print(const char *line); + void print_line(); + void print_screen(); + void redraw_screen(); + void setContrast(uint16_t contrast); +}; + +extern TFTGLCD lcd; + +#include "../fontutils.h" +#include "../lcdprint.h" + +// Use panel encoder - free old encoder pins +#undef BTN_EN1 +#undef BTN_EN2 +#undef BTN_ENC +#define BTN_EN1 -1 +#define BTN_EN2 -1 +#define BTN_ENC -1 + +#ifndef EN_C + #define EN_C 4 //for click +#endif + +#endif // IS_TFTGLCD_PANEL diff --git a/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h b/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h index 451383045b01..276cae522ae7 100644 --- a/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h +++ b/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h @@ -25,97 +25,97 @@ Fontname: -Marlin6x12-Fixed-Medium-R-SemiCondensed--12-90-100-100-C-111-ISO10646-1 Copyright: Public domain terminal emulator font. Share and enjoy. original font -Misc-Fixed-Medium-R-SemiCondensed--12-110-75-75-C-60-ISO10646-1 Capital A Height: 7, '1' Height: 7 - Calculated Max Values w= 5 h=10 x= 5 y= 5 dx= 6 dy= 0 ascent= 8 len=10 + Calculated Max Values w= 7 h=10 x= 5 y= 5 dx= 7 dy= 0 ascent= 8 len=10 Font Bounding box w=12 h=15 x= 0 y=-2 Calculated Min Values x= 0 y=-2 dx= 0 dy= 0 Pure Font ascent = 7 descent=-2 X Font ascent = 8 descent=-2 Max Font ascent = 8 descent=-2 */ -const u8g_fntpgm_uint8_t ISO10646_1_5x7[1325] U8G_FONT_SECTION("ISO10646_1_5x7") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x07,0x02,0x26,0x03,0xbc,0x01,0x7f,0xfe,0x08,0xfe,0x08, +const u8g_fntpgm_uint8_t ISO10646_1_5x7[1324] U8G_FONT_SECTION("ISO10646_1_5x7") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x07,0x02,0x25,0x03,0xbb,0x01,0x7f,0xfe,0x08,0xfe,0x08, 0xfe,0x05,0x08,0x08,0x06,0x00,0x00,0x40,0xf0,0xc8,0x88,0x88,0x98,0x78,0x10,0x05, 0x08,0x08,0x06,0x00,0x00,0xc0,0xf8,0x88,0x88,0x88,0x88,0x88,0xf8,0x05,0x05,0x05, 0x06,0x00,0x01,0x20,0x30,0xf8,0x30,0x20,0x05,0x08,0x08,0x06,0x00,0x00,0x20,0x70, 0xf8,0x20,0x20,0x20,0x20,0xe0,0x05,0x09,0x09,0x06,0x00,0xff,0x20,0x70,0xa8,0xa8, - 0xb8,0x88,0x88,0x70,0x20,0x05,0x06,0x06,0x06,0x00,0x01,0xe0,0x8c,0xea,0x8c,0x8a, - 0x0a,0x05,0x09,0x09,0x06,0x00,0xff,0xf8,0xa8,0x88,0x88,0x88,0x88,0x88,0xa8,0xf8, - 0x05,0x0a,0x0a,0x06,0x00,0xfe,0x20,0x50,0x50,0x50,0x50,0x88,0xa8,0xa8,0x88,0x70, - 0x03,0x03,0x03,0x06,0x00,0x03,0x40,0xa0,0x40,0xff,0xff,0xff,0xff,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00, - 0x00,0x00,0x06,0x05,0xff,0x01,0x07,0x07,0x06,0x02,0x00,0x80,0x80,0x80,0x80,0x80, - 0x00,0x80,0x03,0x03,0x03,0x06,0x01,0x05,0xa0,0xa0,0xa0,0x05,0x06,0x06,0x06,0x00, - 0x00,0x50,0xf8,0x50,0x50,0xf8,0x50,0x05,0x09,0x09,0x06,0x00,0xff,0x20,0x70,0xa8, - 0xa0,0x70,0x28,0xa8,0x70,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0xc8,0xc8,0x10,0x20, - 0x40,0x98,0x98,0x05,0x07,0x07,0x06,0x00,0x00,0x40,0xa0,0xa0,0x40,0xa8,0x90,0x68, - 0x01,0x03,0x03,0x06,0x02,0x05,0x80,0x80,0x80,0x03,0x09,0x09,0x06,0x01,0xff,0x20, - 0x40,0x40,0x80,0x80,0x80,0x40,0x40,0x20,0x03,0x09,0x09,0x06,0x01,0xff,0x80,0x40, - 0x40,0x20,0x20,0x20,0x40,0x40,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0xa8,0x70, - 0x20,0x70,0xa8,0x20,0x05,0x05,0x05,0x06,0x00,0x01,0x20,0x20,0xf8,0x20,0x20,0x02, - 0x03,0x03,0x06,0x01,0xff,0xc0,0x40,0x80,0x05,0x01,0x01,0x06,0x00,0x03,0xf8,0x02, - 0x02,0x02,0x06,0x01,0x00,0xc0,0xc0,0x05,0x07,0x07,0x06,0x00,0x00,0x08,0x10,0x10, - 0x20,0x40,0x40,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x98,0xa8,0xc8,0x88, - 0x70,0x03,0x07,0x07,0x06,0x01,0x00,0x40,0xc0,0x40,0x40,0x40,0x40,0xe0,0x05,0x07, - 0x07,0x06,0x00,0x00,0x70,0x88,0x08,0x10,0x20,0x40,0xf8,0x05,0x07,0x07,0x06,0x00, - 0x00,0xf8,0x08,0x10,0x30,0x08,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x10,0x30, - 0x50,0x90,0xf8,0x10,0x10,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0xf0,0x08,0x08, - 0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x30,0x40,0x80,0xf0,0x88,0x88,0x70,0x05, - 0x07,0x07,0x06,0x00,0x00,0xf8,0x08,0x10,0x10,0x20,0x20,0x20,0x05,0x07,0x07,0x06, - 0x00,0x00,0x70,0x88,0x88,0x70,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x70, - 0x88,0x88,0x78,0x08,0x10,0x60,0x02,0x05,0x05,0x06,0x01,0x00,0xc0,0xc0,0x00,0xc0, - 0xc0,0x02,0x06,0x06,0x06,0x01,0xff,0xc0,0xc0,0x00,0xc0,0x40,0x80,0x03,0x05,0x05, - 0x06,0x01,0x01,0x20,0x40,0x80,0x40,0x20,0x05,0x03,0x03,0x06,0x00,0x02,0xf8,0x00, - 0xf8,0x03,0x05,0x05,0x06,0x01,0x01,0x80,0x40,0x20,0x40,0x80,0x05,0x07,0x07,0x06, - 0x00,0x00,0x70,0x88,0x10,0x20,0x20,0x00,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x70, - 0x88,0xb8,0xa8,0xb8,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0xf8, - 0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x48,0x48,0x70,0x48,0x48,0xf0, - 0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x80,0x88,0x70,0x05,0x07,0x07, - 0x06,0x00,0x00,0xf0,0x48,0x48,0x48,0x48,0x48,0xf0,0x05,0x07,0x07,0x06,0x00,0x00, - 0xf8,0x80,0x80,0xf0,0x80,0x80,0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0x80, - 0xf0,0x80,0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x98,0x88, - 0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0xf8,0x88,0x88,0x88,0x03,0x07, - 0x07,0x06,0x01,0x00,0xe0,0x40,0x40,0x40,0x40,0x40,0xe0,0x05,0x07,0x07,0x06,0x00, - 0x00,0x38,0x10,0x10,0x10,0x10,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x90, - 0xa0,0xc0,0xa0,0x90,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0x80,0x80,0x80, - 0x80,0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0xd8,0xa8,0x88,0x88,0x88,0x88,0x05, - 0x07,0x07,0x06,0x00,0x00,0x88,0x88,0xc8,0xa8,0x98,0x88,0x88,0x05,0x07,0x07,0x06, - 0x00,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0xf0, - 0x88,0x88,0xf0,0x80,0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0x88, - 0xa8,0x90,0x68,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x88,0x88,0xf0,0xa0,0x90,0x88, - 0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x70,0x08,0x88,0x70,0x05,0x07,0x07, - 0x06,0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0x00, - 0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88, - 0x88,0x50,0x50,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x88,0xa8,0xa8, - 0x50,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x50,0x88,0x88,0x05,0x07, - 0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00, - 0x00,0xf8,0x08,0x10,0x20,0x40,0x80,0xf8,0x03,0x09,0x09,0x06,0x01,0xff,0xe0,0x80, - 0x80,0x80,0x80,0x80,0x80,0x80,0xe0,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x40,0x40, - 0x20,0x10,0x10,0x08,0x03,0x09,0x09,0x06,0x01,0xff,0xe0,0x20,0x20,0x20,0x20,0x20, - 0x20,0x20,0xe0,0x05,0x03,0x03,0x06,0x00,0x05,0x20,0x50,0x88,0x05,0x01,0x01,0x06, - 0x00,0xfe,0xf8,0x03,0x03,0x03,0x06,0x01,0x05,0x80,0x40,0x20,0x05,0x05,0x05,0x06, - 0x00,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0xf0, - 0x88,0x88,0x88,0xf0,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x80,0x80,0x88,0x70,0x05, - 0x07,0x07,0x06,0x00,0x00,0x08,0x08,0x78,0x88,0x88,0x88,0x78,0x05,0x05,0x05,0x06, - 0x00,0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x30,0x48,0x40, - 0xe0,0x40,0x40,0x40,0x05,0x07,0x07,0x06,0x00,0xfe,0x70,0x88,0x88,0x88,0x78,0x08, - 0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0xf0,0x88,0x88,0x88,0x88,0x03,0x07, - 0x07,0x06,0x01,0x00,0x40,0x00,0xc0,0x40,0x40,0x40,0xe0,0x04,0x09,0x09,0x06,0x01, - 0xfe,0x10,0x00,0x30,0x10,0x10,0x10,0x10,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00, - 0x80,0x80,0x88,0x90,0xe0,0x90,0x88,0x03,0x07,0x07,0x06,0x01,0x00,0xc0,0x40,0x40, - 0x40,0x40,0x40,0xe0,0x05,0x05,0x05,0x06,0x00,0x00,0xd0,0xa8,0xa8,0xa8,0xa8,0x05, - 0x05,0x05,0x06,0x00,0x00,0xb0,0xc8,0x88,0x88,0x88,0x05,0x05,0x05,0x06,0x00,0x00, - 0x70,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0xfe,0xf0,0x88,0x88,0x88,0xf0, - 0x80,0x80,0x05,0x07,0x07,0x06,0x00,0xfe,0x78,0x88,0x88,0x88,0x78,0x08,0x08,0x05, - 0x05,0x05,0x06,0x00,0x00,0xb0,0xc8,0x80,0x80,0x80,0x05,0x05,0x05,0x06,0x00,0x00, - 0x78,0x80,0x70,0x08,0xf0,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x20,0xf8,0x20,0x20, - 0x20,0x18,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0x88,0x98,0x68,0x05,0x05,0x05, - 0x06,0x00,0x00,0x88,0x88,0x88,0x50,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88, - 0xa8,0xa8,0x50,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x50,0x20,0x50,0x88,0x05,0x07, - 0x07,0x06,0x00,0xfe,0x88,0x88,0x88,0x50,0x20,0x40,0x80,0x05,0x05,0x05,0x06,0x00, - 0x00,0xf8,0x10,0x20,0x40,0xf8,0x03,0x09,0x09,0x06,0x01,0xff,0x20,0x40,0x40,0x40, - 0x80,0x40,0x40,0x40,0x20,0x01,0x09,0x09,0x06,0x02,0xff,0x80,0x80,0x80,0x80,0x80, - 0x80,0x80,0x80,0x80,0x03,0x09,0x09,0x06,0x01,0xff,0x80,0x40,0x40,0x40,0x20,0x40, - 0x40,0x40,0x80,0x05,0x03,0x03,0x06,0x00,0x02,0x48,0xa8,0x90,0xff}; + 0xb8,0x88,0x88,0x70,0x20,0x07,0x05,0x05,0x07,0x00,0x01,0xd8,0x6c,0x36,0x6c,0xd8, + 0x05,0x09,0x09,0x06,0x00,0xff,0xf8,0xa8,0x88,0x88,0x88,0x88,0x88,0xa8,0xf8,0x05, + 0x0a,0x0a,0x06,0x00,0xfe,0x20,0x50,0x50,0x50,0x50,0x88,0xa8,0xa8,0x88,0x70,0x03, + 0x03,0x03,0x06,0x00,0x03,0x40,0xa0,0x40,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, + 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x00, + 0x00,0x06,0x05,0xff,0x01,0x07,0x07,0x06,0x02,0x00,0x80,0x80,0x80,0x80,0x80,0x00, + 0x80,0x03,0x03,0x03,0x06,0x01,0x05,0xa0,0xa0,0xa0,0x05,0x06,0x06,0x06,0x00,0x00, + 0x50,0xf8,0x50,0x50,0xf8,0x50,0x05,0x09,0x09,0x06,0x00,0xff,0x20,0x70,0xa8,0xa0, + 0x70,0x28,0xa8,0x70,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0xc8,0xc8,0x10,0x20,0x40, + 0x98,0x98,0x05,0x07,0x07,0x06,0x00,0x00,0x40,0xa0,0xa0,0x40,0xa8,0x90,0x68,0x01, + 0x03,0x03,0x06,0x02,0x05,0x80,0x80,0x80,0x03,0x09,0x09,0x06,0x01,0xff,0x20,0x40, + 0x40,0x80,0x80,0x80,0x40,0x40,0x20,0x03,0x09,0x09,0x06,0x01,0xff,0x80,0x40,0x40, + 0x20,0x20,0x20,0x40,0x40,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0xa8,0x70,0x20, + 0x70,0xa8,0x20,0x05,0x05,0x05,0x06,0x00,0x01,0x20,0x20,0xf8,0x20,0x20,0x02,0x03, + 0x03,0x06,0x01,0xff,0xc0,0x40,0x80,0x05,0x01,0x01,0x06,0x00,0x03,0xf8,0x02,0x02, + 0x02,0x06,0x01,0x00,0xc0,0xc0,0x05,0x07,0x07,0x06,0x00,0x00,0x08,0x10,0x10,0x20, + 0x40,0x40,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x98,0xa8,0xc8,0x88,0x70, + 0x03,0x07,0x07,0x06,0x01,0x00,0x40,0xc0,0x40,0x40,0x40,0x40,0xe0,0x05,0x07,0x07, + 0x06,0x00,0x00,0x70,0x88,0x08,0x10,0x20,0x40,0xf8,0x05,0x07,0x07,0x06,0x00,0x00, + 0xf8,0x08,0x10,0x30,0x08,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x10,0x30,0x50, + 0x90,0xf8,0x10,0x10,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0xf0,0x08,0x08,0x88, + 0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x30,0x40,0x80,0xf0,0x88,0x88,0x70,0x05,0x07, + 0x07,0x06,0x00,0x00,0xf8,0x08,0x10,0x10,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00, + 0x00,0x70,0x88,0x88,0x70,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88, + 0x88,0x78,0x08,0x10,0x60,0x02,0x05,0x05,0x06,0x01,0x00,0xc0,0xc0,0x00,0xc0,0xc0, + 0x02,0x06,0x06,0x06,0x01,0xff,0xc0,0xc0,0x00,0xc0,0x40,0x80,0x03,0x05,0x05,0x06, + 0x01,0x01,0x20,0x40,0x80,0x40,0x20,0x05,0x03,0x03,0x06,0x00,0x02,0xf8,0x00,0xf8, + 0x03,0x05,0x05,0x06,0x01,0x01,0x80,0x40,0x20,0x40,0x80,0x05,0x07,0x07,0x06,0x00, + 0x00,0x70,0x88,0x10,0x20,0x20,0x00,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88, + 0xb8,0xa8,0xb8,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0xf8,0x88, + 0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x48,0x48,0x70,0x48,0x48,0xf0,0x05, + 0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x80,0x88,0x70,0x05,0x07,0x07,0x06, + 0x00,0x00,0xf0,0x48,0x48,0x48,0x48,0x48,0xf0,0x05,0x07,0x07,0x06,0x00,0x00,0xf8, + 0x80,0x80,0xf0,0x80,0x80,0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0x80,0xf0, + 0x80,0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x98,0x88,0x70, + 0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0xf8,0x88,0x88,0x88,0x03,0x07,0x07, + 0x06,0x01,0x00,0xe0,0x40,0x40,0x40,0x40,0x40,0xe0,0x05,0x07,0x07,0x06,0x00,0x00, + 0x38,0x10,0x10,0x10,0x10,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x90,0xa0, + 0xc0,0xa0,0x90,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80, + 0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0xd8,0xa8,0x88,0x88,0x88,0x88,0x05,0x07, + 0x07,0x06,0x00,0x00,0x88,0x88,0xc8,0xa8,0x98,0x88,0x88,0x05,0x07,0x07,0x06,0x00, + 0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x88, + 0x88,0xf0,0x80,0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0x88,0xa8, + 0x90,0x68,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x88,0x88,0xf0,0xa0,0x90,0x88,0x05, + 0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x70,0x08,0x88,0x70,0x05,0x07,0x07,0x06, + 0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88, + 0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x88, + 0x50,0x50,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x88,0xa8,0xa8,0x50, + 0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x50,0x88,0x88,0x05,0x07,0x07, + 0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0x00, + 0xf8,0x08,0x10,0x20,0x40,0x80,0xf8,0x03,0x09,0x09,0x06,0x01,0xff,0xe0,0x80,0x80, + 0x80,0x80,0x80,0x80,0x80,0xe0,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x40,0x40,0x20, + 0x10,0x10,0x08,0x03,0x09,0x09,0x06,0x01,0xff,0xe0,0x20,0x20,0x20,0x20,0x20,0x20, + 0x20,0xe0,0x05,0x03,0x03,0x06,0x00,0x05,0x20,0x50,0x88,0x05,0x01,0x01,0x06,0x00, + 0xfe,0xf8,0x03,0x03,0x03,0x06,0x01,0x05,0x80,0x40,0x20,0x05,0x05,0x05,0x06,0x00, + 0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0xf0,0x88, + 0x88,0x88,0xf0,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x80,0x80,0x88,0x70,0x05,0x07, + 0x07,0x06,0x00,0x00,0x08,0x08,0x78,0x88,0x88,0x88,0x78,0x05,0x05,0x05,0x06,0x00, + 0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x30,0x48,0x40,0xe0, + 0x40,0x40,0x40,0x05,0x07,0x07,0x06,0x00,0xfe,0x70,0x88,0x88,0x88,0x78,0x08,0x70, + 0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0xf0,0x88,0x88,0x88,0x88,0x03,0x07,0x07, + 0x06,0x01,0x00,0x40,0x00,0xc0,0x40,0x40,0x40,0xe0,0x04,0x09,0x09,0x06,0x01,0xfe, + 0x10,0x00,0x30,0x10,0x10,0x10,0x10,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x80, + 0x80,0x88,0x90,0xe0,0x90,0x88,0x03,0x07,0x07,0x06,0x01,0x00,0xc0,0x40,0x40,0x40, + 0x40,0x40,0xe0,0x05,0x05,0x05,0x06,0x00,0x00,0xd0,0xa8,0xa8,0xa8,0xa8,0x05,0x05, + 0x05,0x06,0x00,0x00,0xb0,0xc8,0x88,0x88,0x88,0x05,0x05,0x05,0x06,0x00,0x00,0x70, + 0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0xfe,0xf0,0x88,0x88,0x88,0xf0,0x80, + 0x80,0x05,0x07,0x07,0x06,0x00,0xfe,0x78,0x88,0x88,0x88,0x78,0x08,0x08,0x05,0x05, + 0x05,0x06,0x00,0x00,0xb0,0xc8,0x80,0x80,0x80,0x05,0x05,0x05,0x06,0x00,0x00,0x78, + 0x80,0x70,0x08,0xf0,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x20,0xf8,0x20,0x20,0x20, + 0x18,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0x88,0x98,0x68,0x05,0x05,0x05,0x06, + 0x00,0x00,0x88,0x88,0x88,0x50,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0xa8, + 0xa8,0x50,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x50,0x20,0x50,0x88,0x05,0x07,0x07, + 0x06,0x00,0xfe,0x88,0x88,0x88,0x50,0x20,0x40,0x80,0x05,0x05,0x05,0x06,0x00,0x00, + 0xf8,0x10,0x20,0x40,0xf8,0x03,0x09,0x09,0x06,0x01,0xff,0x20,0x40,0x40,0x40,0x80, + 0x40,0x40,0x40,0x20,0x01,0x09,0x09,0x06,0x02,0xff,0x80,0x80,0x80,0x80,0x80,0x80, + 0x80,0x80,0x80,0x03,0x09,0x09,0x06,0x01,0xff,0x80,0x40,0x40,0x40,0x20,0x40,0x40, + 0x40,0x80,0x05,0x03,0x03,0x06,0x00,0x02,0x48,0xa8,0x90,0xff}; #else // extended (original) font (symbols 1 - 255) @@ -123,179 +123,179 @@ const u8g_fntpgm_uint8_t ISO10646_1_5x7[1325] U8G_FONT_SECTION("ISO10646_1_5x7") Fontname: -Marlin6x12-Fixed-Medium-R-SemiCondensed--12-90-100-100-C-111-ISO10646-1 Copyright: Public domain terminal emulator font. Share and enjoy. original font -Misc-Fixed-Medium-R-SemiCondensed--12-110-75-75-C-60-ISO10646-1 Capital A Height: 7, '1' Height: 7 - Calculated Max Values w= 6 h=10 x= 5 y= 7 dx= 6 dy= 0 ascent=10 len=10 + Calculated Max Values w= 7 h=10 x= 5 y= 7 dx= 7 dy= 0 ascent=10 len=10 Font Bounding box w=12 h=15 x= 0 y=-2 Calculated Min Values x= 0 y=-2 dx= 0 dy= 0 Pure Font ascent = 7 descent=-2 X Font ascent = 8 descent=-2 Max Font ascent =10 descent=-2 */ -const u8g_fntpgm_uint8_t ISO10646_1_5x7[2648] U8G_FONT_SECTION("ISO10646_1_5x7") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x07,0x02,0x26,0x03,0xbc,0x01,0xff,0xfe,0x0a,0xfe,0x08, +const u8g_fntpgm_uint8_t ISO10646_1_5x7[2647] U8G_FONT_SECTION("ISO10646_1_5x7") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x07,0x02,0x25,0x03,0xbb,0x01,0xff,0xfe,0x0a,0xfe,0x08, 0xfe,0x05,0x08,0x08,0x06,0x00,0x00,0x40,0xf0,0xc8,0x88,0x88,0x98,0x78,0x10,0x05, 0x08,0x08,0x06,0x00,0x00,0xc0,0xf8,0x88,0x88,0x88,0x88,0x88,0xf8,0x05,0x05,0x05, 0x06,0x00,0x01,0x20,0x30,0xf8,0x30,0x20,0x05,0x08,0x08,0x06,0x00,0x00,0x20,0x70, 0xf8,0x20,0x20,0x20,0x20,0xe0,0x05,0x09,0x09,0x06,0x00,0xff,0x20,0x70,0xa8,0xa8, - 0xb8,0x88,0x88,0x70,0x20,0x05,0x06,0x06,0x06,0x00,0x01,0xe0,0x8c,0xea,0x8c,0x8a, - 0x0a,0x05,0x09,0x09,0x06,0x00,0xff,0xf8,0xa8,0x88,0x88,0x88,0x88,0x88,0xa8,0xf8, - 0x05,0x0a,0x0a,0x06,0x00,0xfe,0x20,0x50,0x50,0x50,0x50,0x88,0xa8,0xa8,0x88,0x70, - 0x03,0x03,0x03,0x06,0x00,0x03,0x40,0xa0,0x40,0xff,0xff,0xff,0xff,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00, - 0x00,0x00,0x06,0x05,0xff,0x01,0x07,0x07,0x06,0x02,0x00,0x80,0x80,0x80,0x80,0x80, - 0x00,0x80,0x03,0x03,0x03,0x06,0x01,0x05,0xa0,0xa0,0xa0,0x05,0x06,0x06,0x06,0x00, - 0x00,0x50,0xf8,0x50,0x50,0xf8,0x50,0x05,0x09,0x09,0x06,0x00,0xff,0x20,0x70,0xa8, - 0xa0,0x70,0x28,0xa8,0x70,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0xc8,0xc8,0x10,0x20, - 0x40,0x98,0x98,0x05,0x07,0x07,0x06,0x00,0x00,0x40,0xa0,0xa0,0x40,0xa8,0x90,0x68, - 0x01,0x03,0x03,0x06,0x02,0x05,0x80,0x80,0x80,0x03,0x09,0x09,0x06,0x01,0xff,0x20, - 0x40,0x40,0x80,0x80,0x80,0x40,0x40,0x20,0x03,0x09,0x09,0x06,0x01,0xff,0x80,0x40, - 0x40,0x20,0x20,0x20,0x40,0x40,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0xa8,0x70, - 0x20,0x70,0xa8,0x20,0x05,0x05,0x05,0x06,0x00,0x01,0x20,0x20,0xf8,0x20,0x20,0x02, - 0x03,0x03,0x06,0x01,0xff,0xc0,0x40,0x80,0x05,0x01,0x01,0x06,0x00,0x03,0xf8,0x02, - 0x02,0x02,0x06,0x01,0x00,0xc0,0xc0,0x05,0x07,0x07,0x06,0x00,0x00,0x08,0x10,0x10, - 0x20,0x40,0x40,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x98,0xa8,0xc8,0x88, - 0x70,0x03,0x07,0x07,0x06,0x01,0x00,0x40,0xc0,0x40,0x40,0x40,0x40,0xe0,0x05,0x07, - 0x07,0x06,0x00,0x00,0x70,0x88,0x08,0x10,0x20,0x40,0xf8,0x05,0x07,0x07,0x06,0x00, - 0x00,0xf8,0x08,0x10,0x30,0x08,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x10,0x30, - 0x50,0x90,0xf8,0x10,0x10,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0xf0,0x08,0x08, - 0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x30,0x40,0x80,0xf0,0x88,0x88,0x70,0x05, - 0x07,0x07,0x06,0x00,0x00,0xf8,0x08,0x10,0x10,0x20,0x20,0x20,0x05,0x07,0x07,0x06, - 0x00,0x00,0x70,0x88,0x88,0x70,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x70, - 0x88,0x88,0x78,0x08,0x10,0x60,0x02,0x05,0x05,0x06,0x01,0x00,0xc0,0xc0,0x00,0xc0, - 0xc0,0x02,0x06,0x06,0x06,0x01,0xff,0xc0,0xc0,0x00,0xc0,0x40,0x80,0x03,0x05,0x05, - 0x06,0x01,0x01,0x20,0x40,0x80,0x40,0x20,0x05,0x03,0x03,0x06,0x00,0x02,0xf8,0x00, - 0xf8,0x03,0x05,0x05,0x06,0x01,0x01,0x80,0x40,0x20,0x40,0x80,0x05,0x07,0x07,0x06, - 0x00,0x00,0x70,0x88,0x10,0x20,0x20,0x00,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x70, - 0x88,0xb8,0xa8,0xb8,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0xf8, - 0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x48,0x48,0x70,0x48,0x48,0xf0, - 0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x80,0x88,0x70,0x05,0x07,0x07, - 0x06,0x00,0x00,0xf0,0x48,0x48,0x48,0x48,0x48,0xf0,0x05,0x07,0x07,0x06,0x00,0x00, - 0xf8,0x80,0x80,0xf0,0x80,0x80,0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0x80, - 0xf0,0x80,0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x98,0x88, - 0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0xf8,0x88,0x88,0x88,0x03,0x07, - 0x07,0x06,0x01,0x00,0xe0,0x40,0x40,0x40,0x40,0x40,0xe0,0x05,0x07,0x07,0x06,0x00, - 0x00,0x38,0x10,0x10,0x10,0x10,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x90, - 0xa0,0xc0,0xa0,0x90,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0x80,0x80,0x80, - 0x80,0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0xd8,0xa8,0x88,0x88,0x88,0x88,0x05, - 0x07,0x07,0x06,0x00,0x00,0x88,0x88,0xc8,0xa8,0x98,0x88,0x88,0x05,0x07,0x07,0x06, - 0x00,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0xf0, - 0x88,0x88,0xf0,0x80,0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0x88, - 0xa8,0x90,0x68,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x88,0x88,0xf0,0xa0,0x90,0x88, - 0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x70,0x08,0x88,0x70,0x05,0x07,0x07, - 0x06,0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0x00, - 0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88, - 0x88,0x50,0x50,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x88,0xa8,0xa8, - 0x50,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x50,0x88,0x88,0x05,0x07, - 0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00, - 0x00,0xf8,0x08,0x10,0x20,0x40,0x80,0xf8,0x03,0x09,0x09,0x06,0x01,0xff,0xe0,0x80, - 0x80,0x80,0x80,0x80,0x80,0x80,0xe0,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x40,0x40, - 0x20,0x10,0x10,0x08,0x03,0x09,0x09,0x06,0x01,0xff,0xe0,0x20,0x20,0x20,0x20,0x20, - 0x20,0x20,0xe0,0x05,0x03,0x03,0x06,0x00,0x05,0x20,0x50,0x88,0x05,0x01,0x01,0x06, - 0x00,0xfe,0xf8,0x03,0x03,0x03,0x06,0x01,0x05,0x80,0x40,0x20,0x05,0x05,0x05,0x06, - 0x00,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0xf0, - 0x88,0x88,0x88,0xf0,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x80,0x80,0x88,0x70,0x05, - 0x07,0x07,0x06,0x00,0x00,0x08,0x08,0x78,0x88,0x88,0x88,0x78,0x05,0x05,0x05,0x06, - 0x00,0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x30,0x48,0x40, - 0xe0,0x40,0x40,0x40,0x05,0x07,0x07,0x06,0x00,0xfe,0x70,0x88,0x88,0x88,0x78,0x08, - 0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0xf0,0x88,0x88,0x88,0x88,0x03,0x07, - 0x07,0x06,0x01,0x00,0x40,0x00,0xc0,0x40,0x40,0x40,0xe0,0x04,0x09,0x09,0x06,0x01, - 0xfe,0x10,0x00,0x30,0x10,0x10,0x10,0x10,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00, - 0x80,0x80,0x88,0x90,0xe0,0x90,0x88,0x03,0x07,0x07,0x06,0x01,0x00,0xc0,0x40,0x40, - 0x40,0x40,0x40,0xe0,0x05,0x05,0x05,0x06,0x00,0x00,0xd0,0xa8,0xa8,0xa8,0xa8,0x05, - 0x05,0x05,0x06,0x00,0x00,0xb0,0xc8,0x88,0x88,0x88,0x05,0x05,0x05,0x06,0x00,0x00, - 0x70,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0xfe,0xf0,0x88,0x88,0x88,0xf0, - 0x80,0x80,0x05,0x07,0x07,0x06,0x00,0xfe,0x78,0x88,0x88,0x88,0x78,0x08,0x08,0x05, - 0x05,0x05,0x06,0x00,0x00,0xb0,0xc8,0x80,0x80,0x80,0x05,0x05,0x05,0x06,0x00,0x00, - 0x78,0x80,0x70,0x08,0xf0,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x20,0xf8,0x20,0x20, - 0x20,0x18,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0x88,0x98,0x68,0x05,0x05,0x05, - 0x06,0x00,0x00,0x88,0x88,0x88,0x50,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88, - 0xa8,0xa8,0x50,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x50,0x20,0x50,0x88,0x05,0x07, - 0x07,0x06,0x00,0xfe,0x88,0x88,0x88,0x50,0x20,0x40,0x80,0x05,0x05,0x05,0x06,0x00, - 0x00,0xf8,0x10,0x20,0x40,0xf8,0x03,0x09,0x09,0x06,0x01,0xff,0x20,0x40,0x40,0x40, - 0x80,0x40,0x40,0x40,0x20,0x01,0x09,0x09,0x06,0x02,0xff,0x80,0x80,0x80,0x80,0x80, - 0x80,0x80,0x80,0x80,0x03,0x09,0x09,0x06,0x01,0xff,0x80,0x40,0x40,0x40,0x20,0x40, - 0x40,0x40,0x80,0x05,0x03,0x03,0x06,0x00,0x02,0x48,0xa8,0x90,0xff,0xff,0xff,0xff, + 0xb8,0x88,0x88,0x70,0x20,0x07,0x05,0x05,0x07,0x00,0x01,0xd8,0x6c,0x36,0x6c,0xd8, + 0x05,0x09,0x09,0x06,0x00,0xff,0xf8,0xa8,0x88,0x88,0x88,0x88,0x88,0xa8,0xf8,0x05, + 0x0a,0x0a,0x06,0x00,0xfe,0x20,0x50,0x50,0x50,0x50,0x88,0xa8,0xa8,0x88,0x70,0x03, + 0x03,0x03,0x06,0x00,0x03,0x40,0xa0,0x40,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, + 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x00, + 0x00,0x06,0x05,0xff,0x01,0x07,0x07,0x06,0x02,0x00,0x80,0x80,0x80,0x80,0x80,0x00, + 0x80,0x03,0x03,0x03,0x06,0x01,0x05,0xa0,0xa0,0xa0,0x05,0x06,0x06,0x06,0x00,0x00, + 0x50,0xf8,0x50,0x50,0xf8,0x50,0x05,0x09,0x09,0x06,0x00,0xff,0x20,0x70,0xa8,0xa0, + 0x70,0x28,0xa8,0x70,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0xc8,0xc8,0x10,0x20,0x40, + 0x98,0x98,0x05,0x07,0x07,0x06,0x00,0x00,0x40,0xa0,0xa0,0x40,0xa8,0x90,0x68,0x01, + 0x03,0x03,0x06,0x02,0x05,0x80,0x80,0x80,0x03,0x09,0x09,0x06,0x01,0xff,0x20,0x40, + 0x40,0x80,0x80,0x80,0x40,0x40,0x20,0x03,0x09,0x09,0x06,0x01,0xff,0x80,0x40,0x40, + 0x20,0x20,0x20,0x40,0x40,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0xa8,0x70,0x20, + 0x70,0xa8,0x20,0x05,0x05,0x05,0x06,0x00,0x01,0x20,0x20,0xf8,0x20,0x20,0x02,0x03, + 0x03,0x06,0x01,0xff,0xc0,0x40,0x80,0x05,0x01,0x01,0x06,0x00,0x03,0xf8,0x02,0x02, + 0x02,0x06,0x01,0x00,0xc0,0xc0,0x05,0x07,0x07,0x06,0x00,0x00,0x08,0x10,0x10,0x20, + 0x40,0x40,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x98,0xa8,0xc8,0x88,0x70, + 0x03,0x07,0x07,0x06,0x01,0x00,0x40,0xc0,0x40,0x40,0x40,0x40,0xe0,0x05,0x07,0x07, + 0x06,0x00,0x00,0x70,0x88,0x08,0x10,0x20,0x40,0xf8,0x05,0x07,0x07,0x06,0x00,0x00, + 0xf8,0x08,0x10,0x30,0x08,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x10,0x30,0x50, + 0x90,0xf8,0x10,0x10,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0xf0,0x08,0x08,0x88, + 0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x30,0x40,0x80,0xf0,0x88,0x88,0x70,0x05,0x07, + 0x07,0x06,0x00,0x00,0xf8,0x08,0x10,0x10,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00, + 0x00,0x70,0x88,0x88,0x70,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88, + 0x88,0x78,0x08,0x10,0x60,0x02,0x05,0x05,0x06,0x01,0x00,0xc0,0xc0,0x00,0xc0,0xc0, + 0x02,0x06,0x06,0x06,0x01,0xff,0xc0,0xc0,0x00,0xc0,0x40,0x80,0x03,0x05,0x05,0x06, + 0x01,0x01,0x20,0x40,0x80,0x40,0x20,0x05,0x03,0x03,0x06,0x00,0x02,0xf8,0x00,0xf8, + 0x03,0x05,0x05,0x06,0x01,0x01,0x80,0x40,0x20,0x40,0x80,0x05,0x07,0x07,0x06,0x00, + 0x00,0x70,0x88,0x10,0x20,0x20,0x00,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88, + 0xb8,0xa8,0xb8,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0xf8,0x88, + 0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x48,0x48,0x70,0x48,0x48,0xf0,0x05, + 0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x80,0x88,0x70,0x05,0x07,0x07,0x06, + 0x00,0x00,0xf0,0x48,0x48,0x48,0x48,0x48,0xf0,0x05,0x07,0x07,0x06,0x00,0x00,0xf8, + 0x80,0x80,0xf0,0x80,0x80,0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0x80,0xf0, + 0x80,0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x98,0x88,0x70, + 0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0xf8,0x88,0x88,0x88,0x03,0x07,0x07, + 0x06,0x01,0x00,0xe0,0x40,0x40,0x40,0x40,0x40,0xe0,0x05,0x07,0x07,0x06,0x00,0x00, + 0x38,0x10,0x10,0x10,0x10,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x90,0xa0, + 0xc0,0xa0,0x90,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0x80,0x80,0x80,0x80, + 0xf8,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0xd8,0xa8,0x88,0x88,0x88,0x88,0x05,0x07, + 0x07,0x06,0x00,0x00,0x88,0x88,0xc8,0xa8,0x98,0x88,0x88,0x05,0x07,0x07,0x06,0x00, + 0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x88, + 0x88,0xf0,0x80,0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0x88,0xa8, + 0x90,0x68,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x88,0x88,0xf0,0xa0,0x90,0x88,0x05, + 0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x70,0x08,0x88,0x70,0x05,0x07,0x07,0x06, + 0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88, + 0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x88, + 0x50,0x50,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x88,0xa8,0xa8,0x50, + 0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x50,0x88,0x88,0x05,0x07,0x07, + 0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0x00, + 0xf8,0x08,0x10,0x20,0x40,0x80,0xf8,0x03,0x09,0x09,0x06,0x01,0xff,0xe0,0x80,0x80, + 0x80,0x80,0x80,0x80,0x80,0xe0,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x40,0x40,0x20, + 0x10,0x10,0x08,0x03,0x09,0x09,0x06,0x01,0xff,0xe0,0x20,0x20,0x20,0x20,0x20,0x20, + 0x20,0xe0,0x05,0x03,0x03,0x06,0x00,0x05,0x20,0x50,0x88,0x05,0x01,0x01,0x06,0x00, + 0xfe,0xf8,0x03,0x03,0x03,0x06,0x01,0x05,0x80,0x40,0x20,0x05,0x05,0x05,0x06,0x00, + 0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0xf0,0x88, + 0x88,0x88,0xf0,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x80,0x80,0x88,0x70,0x05,0x07, + 0x07,0x06,0x00,0x00,0x08,0x08,0x78,0x88,0x88,0x88,0x78,0x05,0x05,0x05,0x06,0x00, + 0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x30,0x48,0x40,0xe0, + 0x40,0x40,0x40,0x05,0x07,0x07,0x06,0x00,0xfe,0x70,0x88,0x88,0x88,0x78,0x08,0x70, + 0x05,0x07,0x07,0x06,0x00,0x00,0x80,0x80,0xf0,0x88,0x88,0x88,0x88,0x03,0x07,0x07, + 0x06,0x01,0x00,0x40,0x00,0xc0,0x40,0x40,0x40,0xe0,0x04,0x09,0x09,0x06,0x01,0xfe, + 0x10,0x00,0x30,0x10,0x10,0x10,0x10,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x80, + 0x80,0x88,0x90,0xe0,0x90,0x88,0x03,0x07,0x07,0x06,0x01,0x00,0xc0,0x40,0x40,0x40, + 0x40,0x40,0xe0,0x05,0x05,0x05,0x06,0x00,0x00,0xd0,0xa8,0xa8,0xa8,0xa8,0x05,0x05, + 0x05,0x06,0x00,0x00,0xb0,0xc8,0x88,0x88,0x88,0x05,0x05,0x05,0x06,0x00,0x00,0x70, + 0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0xfe,0xf0,0x88,0x88,0x88,0xf0,0x80, + 0x80,0x05,0x07,0x07,0x06,0x00,0xfe,0x78,0x88,0x88,0x88,0x78,0x08,0x08,0x05,0x05, + 0x05,0x06,0x00,0x00,0xb0,0xc8,0x80,0x80,0x80,0x05,0x05,0x05,0x06,0x00,0x00,0x78, + 0x80,0x70,0x08,0xf0,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x20,0xf8,0x20,0x20,0x20, + 0x18,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0x88,0x98,0x68,0x05,0x05,0x05,0x06, + 0x00,0x00,0x88,0x88,0x88,0x50,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0xa8, + 0xa8,0x50,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x50,0x20,0x50,0x88,0x05,0x07,0x07, + 0x06,0x00,0xfe,0x88,0x88,0x88,0x50,0x20,0x40,0x80,0x05,0x05,0x05,0x06,0x00,0x00, + 0xf8,0x10,0x20,0x40,0xf8,0x03,0x09,0x09,0x06,0x01,0xff,0x20,0x40,0x40,0x40,0x80, + 0x40,0x40,0x40,0x20,0x01,0x09,0x09,0x06,0x02,0xff,0x80,0x80,0x80,0x80,0x80,0x80, + 0x80,0x80,0x80,0x03,0x09,0x09,0x06,0x01,0xff,0x80,0x40,0x40,0x40,0x20,0x40,0x40, + 0x40,0x80,0x05,0x03,0x03,0x06,0x00,0x02,0x48,0xa8,0x90,0xff,0xff,0xff,0xff,0xff, 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff, - 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x00,0x00, - 0x06,0x05,0xff,0x01,0x07,0x07,0x06,0x02,0x00,0x80,0x00,0x80,0x80,0x80,0x80,0x80, - 0x05,0x07,0x07,0x06,0x00,0xff,0x20,0x70,0xa8,0xa0,0xa8,0x70,0x20,0x05,0x07,0x07, - 0x06,0x00,0x00,0x30,0x48,0x40,0xe0,0x40,0x48,0xb0,0x05,0x05,0x05,0x06,0x00,0x00, - 0xa8,0x50,0x88,0x50,0xa8,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x50,0xf8,0x20,0xf8, - 0x20,0x20,0x01,0x07,0x07,0x06,0x02,0x00,0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x04, - 0x08,0x08,0x06,0x01,0x00,0x70,0x80,0x60,0x90,0x90,0x60,0x10,0xe0,0x03,0x01,0x01, - 0x06,0x01,0x07,0xa0,0x06,0x07,0x07,0x06,0x00,0x00,0x78,0x84,0xb4,0xa4,0xb4,0x84, - 0x78,0x03,0x05,0x05,0x06,0x01,0x04,0x60,0xa0,0x60,0x00,0xe0,0x05,0x05,0x05,0x06, - 0x00,0x00,0x28,0x50,0xa0,0x50,0x28,0x05,0x03,0x03,0x06,0x00,0x01,0xf8,0x08,0x08, - 0x03,0x01,0x01,0x06,0x01,0x03,0xe0,0x06,0x07,0x07,0x06,0x00,0x00,0x78,0x84,0xb4, - 0xa4,0xa4,0x84,0x78,0x05,0x01,0x01,0x06,0x00,0x07,0xf8,0x04,0x04,0x04,0x06,0x01, - 0x05,0x60,0x90,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x20,0xf8,0x20,0x20, - 0x00,0xf8,0x03,0x05,0x05,0x06,0x01,0x04,0x40,0xa0,0x20,0x40,0xe0,0x03,0x05,0x05, - 0x06,0x01,0x04,0xc0,0x20,0x40,0x20,0xc0,0x03,0x03,0x03,0x06,0x01,0x05,0x20,0x40, - 0x80,0x05,0x07,0x07,0x06,0x00,0xfe,0x88,0x88,0x88,0x98,0xe8,0x80,0x80,0x05,0x08, - 0x08,0x06,0x00,0x00,0x78,0xe8,0xe8,0xe8,0x68,0x28,0x28,0x28,0x02,0x02,0x02,0x06, - 0x02,0x03,0xc0,0xc0,0x03,0x02,0x02,0x06,0x01,0xfe,0x20,0xc0,0x03,0x05,0x05,0x06, - 0x01,0x04,0x40,0xc0,0x40,0x40,0xe0,0x03,0x05,0x05,0x06,0x01,0x05,0x40,0xa0,0x40, - 0x00,0xe0,0x05,0x05,0x05,0x06,0x00,0x00,0xa0,0x50,0x28,0x50,0xa0,0x05,0x0a,0x0a, - 0x06,0x00,0x00,0x40,0xc0,0x48,0x50,0x60,0x50,0xb0,0x50,0x78,0x10,0x05,0x0a,0x0a, - 0x06,0x00,0x00,0x40,0xc0,0x48,0x50,0x60,0x50,0xa8,0x08,0x10,0x38,0x05,0x0a,0x0a, - 0x06,0x00,0x00,0xc0,0x20,0x48,0x30,0xe0,0x50,0xb0,0x50,0x78,0x10,0x05,0x07,0x07, - 0x06,0x00,0x00,0x20,0x00,0x20,0x20,0x40,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0x00, - 0x40,0x20,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00, - 0x10,0x20,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00, - 0x20,0x50,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00, - 0x68,0xb0,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x09,0x09,0x06,0x00,0x00, - 0x50,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00,0x20, - 0x50,0x20,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x78, - 0xa0,0xa0,0xf0,0xa0,0xa0,0xb8,0x05,0x09,0x09,0x06,0x00,0xfe,0x70,0x88,0x80,0x80, - 0x80,0x88,0x70,0x10,0x60,0x05,0x0a,0x0a,0x06,0x00,0x00,0x40,0x20,0x00,0xf8,0x80, - 0x80,0xf0,0x80,0x80,0xf8,0x05,0x0a,0x0a,0x06,0x00,0x00,0x10,0x20,0x00,0xf8,0x80, - 0x80,0xf0,0x80,0x80,0xf8,0x05,0x0a,0x0a,0x06,0x00,0x00,0x20,0x50,0x00,0xf8,0x80, - 0x80,0xf0,0x80,0x80,0xf8,0x05,0x09,0x09,0x06,0x00,0x00,0x50,0x00,0xf8,0x80,0x80, - 0xf0,0x80,0x80,0xf8,0x03,0x0a,0x0a,0x06,0x01,0x00,0x80,0x40,0x00,0xe0,0x40,0x40, - 0x40,0x40,0x40,0xe0,0x03,0x0a,0x0a,0x06,0x01,0x00,0x20,0x40,0x00,0xe0,0x40,0x40, - 0x40,0x40,0x40,0xe0,0x03,0x0a,0x0a,0x06,0x01,0x00,0x40,0xa0,0x00,0xe0,0x40,0x40, - 0x40,0x40,0x40,0xe0,0x03,0x09,0x09,0x06,0x01,0x00,0xa0,0x00,0xe0,0x40,0x40,0x40, - 0x40,0x40,0xe0,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x48,0x48,0xe8,0x48,0x48,0x70, - 0x05,0x0a,0x0a,0x06,0x00,0x00,0x68,0xb0,0x00,0x88,0x88,0xc8,0xa8,0x98,0x88,0x88, - 0x05,0x0a,0x0a,0x06,0x00,0x00,0x40,0x20,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70, - 0x05,0x0a,0x0a,0x06,0x00,0x00,0x10,0x20,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70, - 0x05,0x0a,0x0a,0x06,0x00,0x00,0x20,0x50,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70, - 0x05,0x0a,0x0a,0x06,0x00,0x00,0x68,0xb0,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70, - 0x05,0x09,0x09,0x06,0x00,0x00,0x50,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05, - 0x05,0x05,0x06,0x00,0x01,0x88,0x50,0x20,0x50,0x88,0x05,0x09,0x09,0x06,0x00,0xff, - 0x08,0x70,0x98,0xa8,0xa8,0xa8,0xc8,0x70,0x80,0x05,0x0a,0x0a,0x06,0x00,0x00,0x40, - 0x20,0x00,0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0x00,0x10, - 0x20,0x00,0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0x00,0x20, - 0x50,0x00,0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x09,0x09,0x06,0x00,0x00,0x50, + 0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0xff,0x00,0x00,0x00,0x06, + 0x05,0xff,0x01,0x07,0x07,0x06,0x02,0x00,0x80,0x00,0x80,0x80,0x80,0x80,0x80,0x05, + 0x07,0x07,0x06,0x00,0xff,0x20,0x70,0xa8,0xa0,0xa8,0x70,0x20,0x05,0x07,0x07,0x06, + 0x00,0x00,0x30,0x48,0x40,0xe0,0x40,0x48,0xb0,0x05,0x05,0x05,0x06,0x00,0x00,0xa8, + 0x50,0x88,0x50,0xa8,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x50,0xf8,0x20,0xf8,0x20, + 0x20,0x01,0x07,0x07,0x06,0x02,0x00,0x80,0x80,0x80,0x00,0x80,0x80,0x80,0x04,0x08, + 0x08,0x06,0x01,0x00,0x70,0x80,0x60,0x90,0x90,0x60,0x10,0xe0,0x03,0x01,0x01,0x06, + 0x01,0x07,0xa0,0x06,0x07,0x07,0x06,0x00,0x00,0x78,0x84,0xb4,0xa4,0xb4,0x84,0x78, + 0x03,0x05,0x05,0x06,0x01,0x04,0x60,0xa0,0x60,0x00,0xe0,0x05,0x05,0x05,0x06,0x00, + 0x00,0x28,0x50,0xa0,0x50,0x28,0x05,0x03,0x03,0x06,0x00,0x01,0xf8,0x08,0x08,0x03, + 0x01,0x01,0x06,0x01,0x03,0xe0,0x06,0x07,0x07,0x06,0x00,0x00,0x78,0x84,0xb4,0xa4, + 0xa4,0x84,0x78,0x05,0x01,0x01,0x06,0x00,0x07,0xf8,0x04,0x04,0x04,0x06,0x01,0x05, + 0x60,0x90,0x90,0x60,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x20,0xf8,0x20,0x20,0x00, + 0xf8,0x03,0x05,0x05,0x06,0x01,0x04,0x40,0xa0,0x20,0x40,0xe0,0x03,0x05,0x05,0x06, + 0x01,0x04,0xc0,0x20,0x40,0x20,0xc0,0x03,0x03,0x03,0x06,0x01,0x05,0x20,0x40,0x80, + 0x05,0x07,0x07,0x06,0x00,0xfe,0x88,0x88,0x88,0x98,0xe8,0x80,0x80,0x05,0x08,0x08, + 0x06,0x00,0x00,0x78,0xe8,0xe8,0xe8,0x68,0x28,0x28,0x28,0x02,0x02,0x02,0x06,0x02, + 0x03,0xc0,0xc0,0x03,0x02,0x02,0x06,0x01,0xfe,0x20,0xc0,0x03,0x05,0x05,0x06,0x01, + 0x04,0x40,0xc0,0x40,0x40,0xe0,0x03,0x05,0x05,0x06,0x01,0x05,0x40,0xa0,0x40,0x00, + 0xe0,0x05,0x05,0x05,0x06,0x00,0x00,0xa0,0x50,0x28,0x50,0xa0,0x05,0x0a,0x0a,0x06, + 0x00,0x00,0x40,0xc0,0x48,0x50,0x60,0x50,0xb0,0x50,0x78,0x10,0x05,0x0a,0x0a,0x06, + 0x00,0x00,0x40,0xc0,0x48,0x50,0x60,0x50,0xa8,0x08,0x10,0x38,0x05,0x0a,0x0a,0x06, + 0x00,0x00,0xc0,0x20,0x48,0x30,0xe0,0x50,0xb0,0x50,0x78,0x10,0x05,0x07,0x07,0x06, + 0x00,0x00,0x20,0x00,0x20,0x20,0x40,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0x00,0x40, + 0x20,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00,0x10, + 0x20,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00,0x20, + 0x50,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00,0x68, + 0xb0,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x09,0x09,0x06,0x00,0x00,0x50, + 0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00,0x20,0x50, + 0x20,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x78,0xa0, + 0xa0,0xf0,0xa0,0xa0,0xb8,0x05,0x09,0x09,0x06,0x00,0xfe,0x70,0x88,0x80,0x80,0x80, + 0x88,0x70,0x10,0x60,0x05,0x0a,0x0a,0x06,0x00,0x00,0x40,0x20,0x00,0xf8,0x80,0x80, + 0xf0,0x80,0x80,0xf8,0x05,0x0a,0x0a,0x06,0x00,0x00,0x10,0x20,0x00,0xf8,0x80,0x80, + 0xf0,0x80,0x80,0xf8,0x05,0x0a,0x0a,0x06,0x00,0x00,0x20,0x50,0x00,0xf8,0x80,0x80, + 0xf0,0x80,0x80,0xf8,0x05,0x09,0x09,0x06,0x00,0x00,0x50,0x00,0xf8,0x80,0x80,0xf0, + 0x80,0x80,0xf8,0x03,0x0a,0x0a,0x06,0x01,0x00,0x80,0x40,0x00,0xe0,0x40,0x40,0x40, + 0x40,0x40,0xe0,0x03,0x0a,0x0a,0x06,0x01,0x00,0x20,0x40,0x00,0xe0,0x40,0x40,0x40, + 0x40,0x40,0xe0,0x03,0x0a,0x0a,0x06,0x01,0x00,0x40,0xa0,0x00,0xe0,0x40,0x40,0x40, + 0x40,0x40,0xe0,0x03,0x09,0x09,0x06,0x01,0x00,0xa0,0x00,0xe0,0x40,0x40,0x40,0x40, + 0x40,0xe0,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x48,0x48,0xe8,0x48,0x48,0x70,0x05, + 0x0a,0x0a,0x06,0x00,0x00,0x68,0xb0,0x00,0x88,0x88,0xc8,0xa8,0x98,0x88,0x88,0x05, + 0x0a,0x0a,0x06,0x00,0x00,0x40,0x20,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05, + 0x0a,0x0a,0x06,0x00,0x00,0x10,0x20,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05, + 0x0a,0x0a,0x06,0x00,0x00,0x20,0x50,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05, + 0x0a,0x0a,0x06,0x00,0x00,0x68,0xb0,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05, + 0x09,0x09,0x06,0x00,0x00,0x50,0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x05, + 0x05,0x06,0x00,0x01,0x88,0x50,0x20,0x50,0x88,0x05,0x09,0x09,0x06,0x00,0xff,0x08, + 0x70,0x98,0xa8,0xa8,0xa8,0xc8,0x70,0x80,0x05,0x0a,0x0a,0x06,0x00,0x00,0x40,0x20, 0x00,0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0x00,0x10,0x20, - 0x00,0x88,0x88,0x50,0x20,0x20,0x20,0x20,0x04,0x07,0x07,0x06,0x01,0x00,0x80,0xe0, - 0x90,0x90,0x90,0xe0,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x90,0xa0,0x90, - 0x88,0xb0,0x05,0x08,0x08,0x06,0x00,0x00,0x40,0x20,0x00,0x70,0x08,0x78,0x88,0x78, - 0x05,0x08,0x08,0x06,0x00,0x00,0x10,0x20,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x08, - 0x08,0x06,0x00,0x00,0x20,0x50,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x08,0x08,0x06, - 0x00,0x00,0x68,0xb0,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06,0x00,0x00, - 0x50,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x08,0x08,0x06,0x00,0x00,0x20,0x50,0x20, - 0x70,0x08,0x78,0x88,0x78,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x28,0x70,0xa0,0x78, - 0x05,0x07,0x07,0x06,0x00,0xfe,0x70,0x88,0x80,0x88,0x70,0x10,0x60,0x05,0x08,0x08, - 0x06,0x00,0x00,0x40,0x20,0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x08,0x08,0x06,0x00, - 0x00,0x10,0x20,0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x20, - 0x50,0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x50,0x00,0x70, - 0x88,0xf0,0x80,0x70,0x03,0x08,0x08,0x06,0x01,0x00,0x80,0x40,0x00,0xc0,0x40,0x40, - 0x40,0xe0,0x03,0x08,0x08,0x06,0x01,0x00,0x20,0x40,0x00,0xc0,0x40,0x40,0x40,0xe0, - 0x03,0x08,0x08,0x06,0x01,0x00,0x40,0xa0,0x00,0xc0,0x40,0x40,0x40,0xe0,0x03,0x07, - 0x07,0x06,0x01,0x00,0xa0,0x00,0xc0,0x40,0x40,0x40,0xe0,0x05,0x09,0x09,0x06,0x00, - 0x00,0x50,0x20,0x50,0x08,0x78,0x88,0x88,0x88,0x70,0x05,0x08,0x08,0x06,0x00,0x00, - 0x68,0xb0,0x00,0xb0,0xc8,0x88,0x88,0x88,0x05,0x08,0x08,0x06,0x00,0x00,0x40,0x20, - 0x00,0x70,0x88,0x88,0x88,0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x10,0x20,0x00,0x70, - 0x88,0x88,0x88,0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x20,0x50,0x00,0x70,0x88,0x88, - 0x88,0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x68,0xb0,0x00,0x70,0x88,0x88,0x88,0x70, - 0x05,0x07,0x07,0x06,0x00,0x00,0x50,0x00,0x70,0x88,0x88,0x88,0x70,0x05,0x05,0x05, - 0x06,0x00,0x01,0x20,0x00,0xf8,0x00,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x78,0x98, - 0xa8,0xc8,0xf0,0x05,0x08,0x08,0x06,0x00,0x00,0x40,0x20,0x00,0x88,0x88,0x88,0x88, - 0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x10,0x20,0x00,0x88,0x88,0x88,0x88,0x70,0x05, - 0x08,0x08,0x06,0x00,0x00,0x20,0x50,0x00,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07, - 0x06,0x00,0x00,0x50,0x00,0x88,0x88,0x88,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0xfe, - 0x10,0x20,0x00,0x88,0x88,0x88,0x50,0x20,0x40,0x80,0x05,0x09,0x09,0x06,0x00,0xfe, - 0x80,0x80,0xf0,0x88,0x88,0x88,0xf0,0x80,0x80,0x05,0x09,0x09,0x06,0x00,0xfe,0x50, - 0x00,0x88,0x88,0x88,0x50,0x20,0x40,0x80}; + 0x00,0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0x00,0x20,0x50, + 0x00,0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x09,0x09,0x06,0x00,0x00,0x50,0x00, + 0x88,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0x00,0x10,0x20,0x00, + 0x88,0x88,0x50,0x20,0x20,0x20,0x20,0x04,0x07,0x07,0x06,0x01,0x00,0x80,0xe0,0x90, + 0x90,0x90,0xe0,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x90,0xa0,0x90,0x88, + 0xb0,0x05,0x08,0x08,0x06,0x00,0x00,0x40,0x20,0x00,0x70,0x08,0x78,0x88,0x78,0x05, + 0x08,0x08,0x06,0x00,0x00,0x10,0x20,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x08,0x08, + 0x06,0x00,0x00,0x20,0x50,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x08,0x08,0x06,0x00, + 0x00,0x68,0xb0,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06,0x00,0x00,0x50, + 0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x08,0x08,0x06,0x00,0x00,0x20,0x50,0x20,0x70, + 0x08,0x78,0x88,0x78,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x28,0x70,0xa0,0x78,0x05, + 0x07,0x07,0x06,0x00,0xfe,0x70,0x88,0x80,0x88,0x70,0x10,0x60,0x05,0x08,0x08,0x06, + 0x00,0x00,0x40,0x20,0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x08,0x08,0x06,0x00,0x00, + 0x10,0x20,0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x20,0x50, + 0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x50,0x00,0x70,0x88, + 0xf0,0x80,0x70,0x03,0x08,0x08,0x06,0x01,0x00,0x80,0x40,0x00,0xc0,0x40,0x40,0x40, + 0xe0,0x03,0x08,0x08,0x06,0x01,0x00,0x20,0x40,0x00,0xc0,0x40,0x40,0x40,0xe0,0x03, + 0x08,0x08,0x06,0x01,0x00,0x40,0xa0,0x00,0xc0,0x40,0x40,0x40,0xe0,0x03,0x07,0x07, + 0x06,0x01,0x00,0xa0,0x00,0xc0,0x40,0x40,0x40,0xe0,0x05,0x09,0x09,0x06,0x00,0x00, + 0x50,0x20,0x50,0x08,0x78,0x88,0x88,0x88,0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x68, + 0xb0,0x00,0xb0,0xc8,0x88,0x88,0x88,0x05,0x08,0x08,0x06,0x00,0x00,0x40,0x20,0x00, + 0x70,0x88,0x88,0x88,0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x10,0x20,0x00,0x70,0x88, + 0x88,0x88,0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x20,0x50,0x00,0x70,0x88,0x88,0x88, + 0x70,0x05,0x08,0x08,0x06,0x00,0x00,0x68,0xb0,0x00,0x70,0x88,0x88,0x88,0x70,0x05, + 0x07,0x07,0x06,0x00,0x00,0x50,0x00,0x70,0x88,0x88,0x88,0x70,0x05,0x05,0x05,0x06, + 0x00,0x01,0x20,0x00,0xf8,0x00,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x78,0x98,0xa8, + 0xc8,0xf0,0x05,0x08,0x08,0x06,0x00,0x00,0x40,0x20,0x00,0x88,0x88,0x88,0x88,0x70, + 0x05,0x08,0x08,0x06,0x00,0x00,0x10,0x20,0x00,0x88,0x88,0x88,0x88,0x70,0x05,0x08, + 0x08,0x06,0x00,0x00,0x20,0x50,0x00,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06, + 0x00,0x00,0x50,0x00,0x88,0x88,0x88,0x88,0x70,0x05,0x0a,0x0a,0x06,0x00,0xfe,0x10, + 0x20,0x00,0x88,0x88,0x88,0x50,0x20,0x40,0x80,0x05,0x09,0x09,0x06,0x00,0xfe,0x80, + 0x80,0xf0,0x88,0x88,0x88,0xf0,0x80,0x80,0x05,0x09,0x09,0x06,0x00,0xfe,0x50,0x00, + 0x88,0x88,0x88,0x50,0x20,0x40,0x80}; #endif diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_ru.h b/Marlin/src/lcd/dogm/fontdata/langdata_ru.h index cd0efda12f6d..87e3d422a578 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_ru.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_ru.h @@ -5,8 +5,8 @@ */ #include -const u8g_fntpgm_uint8_t fontpage_8_144_152[135] U8G_FONT_SECTION("fontpage_8_144_152") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x90,0x98,0x00,0x07,0xff,0x00, +const u8g_fntpgm_uint8_t fontpage_8_144_168[348] U8G_FONT_SECTION("fontpage_8_144_168") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x90,0xa8,0x00,0x0a,0xfe,0x00, 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x07, 0x07,0x06,0x00,0x00,0xf0,0x80,0x80,0xf0,0x88,0x88,0xf0,0x05,0x07,0x07,0x06,0x00, 0x00,0xf0,0x88,0x88,0xf0,0x88,0x88,0xf0,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80, @@ -14,29 +14,27 @@ const u8g_fntpgm_uint8_t fontpage_8_144_152[135] U8G_FONT_SECTION("fontpage_8_14 0x50,0xf8,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0x80,0xf0,0x80,0x80,0xf8, 0x05,0x07,0x07,0x06,0x00,0x00,0xa8,0xa8,0x70,0x20,0x70,0xa8,0xa8,0x05,0x07,0x07, 0x06,0x00,0x00,0x70,0x88,0x08,0x70,0x08,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00, - 0x88,0x88,0x98,0xa8,0xc8,0x88,0x88}; -const u8g_fntpgm_uint8_t fontpage_8_154_168[214] U8G_FONT_SECTION("fontpage_8_154_168") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x9a,0xa8,0x00,0x07,0xfe,0x00, - 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x90,0xa0,0xc0,0xa0,0x90,0x88,0x05,0x07, - 0x07,0x06,0x00,0x00,0x38,0x48,0x48,0x48,0x48,0x48,0x88,0x05,0x07,0x07,0x06,0x00, - 0x00,0x88,0xd8,0xa8,0x88,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88, - 0x88,0xf8,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0x88,0x88, - 0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x88,0x88,0x88,0x88,0x88,0x88,0x05, - 0x07,0x07,0x06,0x00,0x00,0xf0,0x88,0x88,0xf0,0x80,0x80,0x80,0x05,0x07,0x07,0x06, - 0x00,0x00,0x70,0x88,0x80,0x80,0x80,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0xf8, - 0x20,0x20,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x88, - 0x78,0x08,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x70,0xa8,0xa8,0xa8,0x70,0x20, - 0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20,0x50,0x88,0x88,0x05,0x09,0x09, - 0x06,0x00,0xfe,0x90,0x90,0x90,0x90,0x90,0x90,0xf8,0x08,0x08,0x05,0x07,0x07,0x06, - 0x00,0x00,0x88,0x88,0x88,0x78,0x08,0x08,0x08,0x05,0x07,0x07,0x06,0x00,0x00,0xa8, - 0xa8,0xa8,0xa8,0xa8,0xa8,0xf8}; + 0x88,0x88,0x98,0xa8,0xc8,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00,0x88,0x70,0x00, + 0x88,0x88,0x98,0xa8,0xc8,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x90,0xa0, + 0xc0,0xa0,0x90,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x38,0x48,0x48,0x48,0x48,0x48, + 0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0xd8,0xa8,0x88,0x88,0x88,0x88,0x05,0x07, + 0x07,0x06,0x00,0x00,0x88,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00, + 0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x88, + 0x88,0x88,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x88,0x88,0xf0,0x80, + 0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x80,0x88,0x70,0x05, + 0x07,0x07,0x06,0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06, + 0x00,0x00,0x88,0x88,0x88,0x88,0x78,0x08,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x20, + 0x70,0xa8,0xa8,0xa8,0x70,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20, + 0x50,0x88,0x88,0x05,0x09,0x09,0x06,0x00,0xfe,0x90,0x90,0x90,0x90,0x90,0x90,0xf8, + 0x08,0x08,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x78,0x08,0x08,0x08,0x05, + 0x07,0x07,0x06,0x00,0x00,0xa8,0xa8,0xa8,0xa8,0xa8,0xa8,0xf8}; const u8g_fntpgm_uint8_t fontpage_8_171_173[56] U8G_FONT_SECTION("fontpage_8_171_173") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xab,0xad,0x00,0x07,0x00,0x00, 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0xc8,0xa8,0xa8,0xc8,0x04,0x07, 0x07,0x06,0x01,0x00,0x80,0x80,0x80,0xe0,0x90,0x90,0xe0,0x05,0x07,0x07,0x06,0x00, 0x00,0x70,0x88,0x08,0x78,0x08,0x88,0x70}; -const u8g_fntpgm_uint8_t fontpage_8_175_201[334] U8G_FONT_SECTION("fontpage_8_175_201") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xaf,0xc9,0x00,0x08,0xfe,0x00, +const u8g_fntpgm_uint8_t fontpage_8_175_207[400] U8G_FONT_SECTION("fontpage_8_175_207") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xaf,0xcf,0x00,0x08,0xfe,0x00, 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x78,0x88,0x88,0x78,0x28,0x48,0x88,0x05,0x05, 0x05,0x06,0x00,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06,0x00,0x00,0x70, 0x80,0xf0,0x88,0x88,0x88,0x70,0x05,0x05,0x05,0x06,0x00,0x00,0xf0,0x88,0xf0,0x88, @@ -56,23 +54,20 @@ const u8g_fntpgm_uint8_t fontpage_8_175_201[334] U8G_FONT_SECTION("fontpage_8_17 0x70,0x20,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x50,0x20,0x50,0x88,0x05,0x07, 0x07,0x06,0x00,0xfe,0x90,0x90,0x90,0x90,0xf8,0x08,0x08,0x05,0x05,0x05,0x06,0x00, 0x00,0x88,0x88,0x78,0x08,0x08,0x05,0x05,0x05,0x06,0x00,0x00,0xa8,0xa8,0xa8,0xa8, - 0xf8,0x05,0x07,0x07,0x06,0x00,0xfe,0xa8,0xa8,0xa8,0xa8,0xf8,0x08,0x08}; -const u8g_fntpgm_uint8_t fontpage_8_203_207[72] U8G_FONT_SECTION("fontpage_8_203_207") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xcb,0xcf,0x00,0x05,0x00,0x00, - 0x00,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0xc8,0xa8,0xc8,0x04,0x05,0x05,0x06, - 0x01,0x00,0x80,0x80,0xe0,0x90,0xe0,0x04,0x05,0x05,0x06,0x01,0x00,0xe0,0x10,0x70, - 0x10,0xe0,0x05,0x05,0x05,0x06,0x00,0x00,0x90,0xa8,0xe8,0xa8,0x90,0x04,0x05,0x05, - 0x06,0x01,0x00,0x70,0x90,0x70,0x50,0x90}; + 0xf8,0x05,0x07,0x07,0x06,0x00,0xfe,0xa8,0xa8,0xa8,0xa8,0xf8,0x08,0x08,0x05,0x05, + 0x05,0x06,0x00,0x00,0xc0,0x40,0x70,0x48,0x70,0x05,0x05,0x05,0x06,0x00,0x00,0x88, + 0x88,0xc8,0xa8,0xc8,0x04,0x05,0x05,0x06,0x01,0x00,0x80,0x80,0xe0,0x90,0xe0,0x04, + 0x05,0x05,0x06,0x01,0x00,0xe0,0x10,0x70,0x10,0xe0,0x05,0x05,0x05,0x06,0x00,0x00, + 0x90,0xa8,0xe8,0xa8,0x90,0x04,0x05,0x05,0x06,0x01,0x00,0x70,0x90,0x70,0x50,0x90 + }; const u8g_fntpgm_uint8_t fontpage_8_209_209[30] U8G_FONT_SECTION("fontpage_8_209_209") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd1,0xd1,0x00,0x07,0x00,0x00, 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x50,0x00,0x70,0x88,0xf0,0x80,0x70}; #define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(8, 144, 152, fontpage_8_144_152), // 'А' -- 'И' - FONTDATA_ITEM(8, 154, 168, fontpage_8_154_168), // 'К' -- 'Ш' + FONTDATA_ITEM(8, 144, 168, fontpage_8_144_168), // 'А' -- 'Ш' FONTDATA_ITEM(8, 171, 173, fontpage_8_171_173), // 'Ы' -- 'Э' - FONTDATA_ITEM(8, 175, 201, fontpage_8_175_201), // 'Я' -- 'щ' - FONTDATA_ITEM(8, 203, 207, fontpage_8_203_207), // 'ы' -- 'я' + FONTDATA_ITEM(8, 175, 207, fontpage_8_175_207), // 'Я' -- 'я' FONTDATA_ITEM(8, 209, 209, fontpage_8_209_209), // 'ё' -- 'ё' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_uk.h b/Marlin/src/lcd/dogm/fontdata/langdata_uk.h index 5d34d1b994ef..e3800eb6bb85 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_uk.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_uk.h @@ -8,60 +8,55 @@ const u8g_fntpgm_uint8_t fontpage_8_134_134[30] U8G_FONT_SECTION("fontpage_8_134_134") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x86,0x86,0x00,0x07,0x00,0x00, 0x00,0x03,0x07,0x07,0x06,0x01,0x00,0xe0,0x40,0x40,0x40,0x40,0x40,0xe0}; -const u8g_fntpgm_uint8_t fontpage_8_144_146[56] U8G_FONT_SECTION("fontpage_8_144_146") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x90,0x92,0x00,0x07,0x00,0x00, +const u8g_fntpgm_uint8_t fontpage_8_144_169[363] U8G_FONT_SECTION("fontpage_8_144_169") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x90,0xa9,0x00,0x0a,0xfe,0x00, 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x07, 0x07,0x06,0x00,0x00,0xf0,0x80,0x80,0xf0,0x88,0x88,0xf0,0x05,0x07,0x07,0x06,0x00, - 0x00,0xf0,0x88,0x88,0xf0,0x88,0x88,0xf0}; -const u8g_fntpgm_uint8_t fontpage_8_148_149[44] U8G_FONT_SECTION("fontpage_8_148_149") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x94,0x95,0x00,0x07,0xff,0x00, - 0x00,0x05,0x08,0x08,0x06,0x00,0xff,0x30,0x50,0x50,0x50,0x50,0x50,0xf8,0x88,0x05, - 0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0x80,0xf0,0x80,0x80,0xf8}; -const u8g_fntpgm_uint8_t fontpage_8_151_154[72] U8G_FONT_SECTION("fontpage_8_151_154") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x97,0x9a,0x00,0x0a,0x00,0x00, - 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x08,0x70,0x08,0x88,0x70,0x05,0x07, - 0x07,0x06,0x00,0x00,0x88,0x88,0x98,0xa8,0xc8,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00, - 0x00,0x88,0x70,0x00,0x88,0x88,0x98,0xa8,0xc8,0x88,0x88,0x05,0x07,0x07,0x06,0x00, - 0x00,0x88,0x90,0xa0,0xc0,0xa0,0x90,0x88}; -const u8g_fntpgm_uint8_t fontpage_8_156_164[134] U8G_FONT_SECTION("fontpage_8_156_164") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x9c,0xa4,0x00,0x07,0x00,0x00, - 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0xd8,0xa8,0x88,0x88,0x88,0x88,0x05,0x07, + 0x00,0xf0,0x88,0x88,0xf0,0x88,0x88,0xf0,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80, + 0x80,0x80,0x80,0x80,0x80,0x05,0x08,0x08,0x06,0x00,0xff,0x30,0x50,0x50,0x50,0x50, + 0x50,0xf8,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x80,0x80,0xf0,0x80,0x80,0xf8, + 0x05,0x07,0x07,0x06,0x00,0x00,0xa8,0xa8,0x70,0x20,0x70,0xa8,0xa8,0x05,0x07,0x07, + 0x06,0x00,0x00,0x70,0x88,0x08,0x70,0x08,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00, + 0x88,0x88,0x98,0xa8,0xc8,0x88,0x88,0x05,0x0a,0x0a,0x06,0x00,0x00,0x88,0x70,0x00, + 0x88,0x88,0x98,0xa8,0xc8,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x90,0xa0, + 0xc0,0xa0,0x90,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x38,0x48,0x48,0x48,0x48,0x48, + 0x88,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0xd8,0xa8,0x88,0x88,0x88,0x88,0x05,0x07, 0x07,0x06,0x00,0x00,0x88,0x88,0x88,0xf8,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00, 0x00,0x70,0x88,0x88,0x88,0x88,0x88,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0xf8,0x88, 0x88,0x88,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0x00,0xf0,0x88,0x88,0xf0,0x80, 0x80,0x80,0x05,0x07,0x07,0x06,0x00,0x00,0x70,0x88,0x80,0x80,0x80,0x88,0x70,0x05, 0x07,0x07,0x06,0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06, 0x00,0x00,0x88,0x88,0x88,0x88,0x78,0x08,0x70,0x05,0x07,0x07,0x06,0x00,0x00,0x20, - 0x70,0xa8,0xa8,0xa8,0x70,0x20}; -const u8g_fntpgm_uint8_t fontpage_8_166_166[32] U8G_FONT_SECTION("fontpage_8_166_166") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa6,0xa6,0x00,0x07,0xfe,0x00, - 0x00,0x05,0x09,0x09,0x06,0x00,0xfe,0x90,0x90,0x90,0x90,0x90,0x90,0xf8,0x08,0x08 - }; -const u8g_fntpgm_uint8_t fontpage_8_168_168[30] U8G_FONT_SECTION("fontpage_8_168_168") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xa8,0xa8,0x00,0x07,0x00,0x00, - 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0xa8,0xa8,0xa8,0xa8,0xa8,0xa8,0xf8}; -const u8g_fntpgm_uint8_t fontpage_8_176_201[321] U8G_FONT_SECTION("fontpage_8_176_201") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xb0,0xc9,0x00,0x08,0xfe,0x00, - 0x00,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06, - 0x00,0x00,0x70,0x80,0xf0,0x88,0x88,0x88,0x70,0x05,0x05,0x05,0x06,0x00,0x00,0xf0, - 0x88,0xf0,0x88,0xf0,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,0x80,0x80,0x80,0x80,0x05, - 0x06,0x06,0x06,0x00,0xff,0x30,0x50,0x50,0x50,0xf8,0x88,0x05,0x05,0x05,0x06,0x00, - 0x00,0x70,0x88,0xf0,0x80,0x70,0x05,0x05,0x05,0x06,0x00,0x00,0xa8,0x70,0x20,0x70, - 0xa8,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x88,0x30,0x88,0x70,0x05,0x05,0x05,0x06, - 0x00,0x00,0x88,0x98,0xa8,0xc8,0x88,0x05,0x08,0x08,0x06,0x00,0x00,0x88,0x70,0x00, - 0x88,0x98,0xa8,0xc8,0x88,0x04,0x05,0x05,0x06,0x01,0x00,0x90,0xa0,0xc0,0xa0,0x90, - 0x05,0x05,0x05,0x06,0x00,0x00,0x38,0x48,0x48,0x48,0x88,0x05,0x05,0x05,0x06,0x00, - 0x00,0x88,0xd8,0xa8,0x88,0x88,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0xf8,0x88, - 0x88,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x88,0x88,0x88,0x70,0x05,0x05,0x05,0x06, - 0x00,0x00,0xf8,0x88,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0xfe,0xf0,0x88,0x88, - 0x88,0xf0,0x80,0x80,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x88,0x80,0x88,0x70,0x05, - 0x05,0x05,0x06,0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0xfe, - 0x88,0x88,0x88,0x88,0x78,0x08,0x70,0x05,0x09,0x09,0x06,0x00,0xfe,0x20,0x20,0x70, - 0xa8,0xa8,0xa8,0x70,0x20,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x50,0x20,0x50, - 0x88,0x05,0x07,0x07,0x06,0x00,0xfe,0x90,0x90,0x90,0x90,0xf8,0x08,0x08,0x05,0x05, - 0x05,0x06,0x00,0x00,0x88,0x88,0x78,0x08,0x08,0x05,0x05,0x05,0x06,0x00,0x00,0xa8, - 0xa8,0xa8,0xa8,0xf8,0x05,0x07,0x07,0x06,0x00,0xfe,0xa8,0xa8,0xa8,0xa8,0xf8,0x08, - 0x08}; + 0x70,0xa8,0xa8,0xa8,0x70,0x20,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x50,0x20, + 0x50,0x88,0x88,0x05,0x09,0x09,0x06,0x00,0xfe,0x90,0x90,0x90,0x90,0x90,0x90,0xf8, + 0x08,0x08,0x05,0x07,0x07,0x06,0x00,0x00,0x88,0x88,0x88,0x78,0x08,0x08,0x08,0x05, + 0x07,0x07,0x06,0x00,0x00,0xa8,0xa8,0xa8,0xa8,0xa8,0xa8,0xf8,0x05,0x09,0x09,0x06, + 0x00,0xfe,0xa8,0xa8,0xa8,0xa8,0xa8,0xa8,0xf8,0x08,0x08}; +const u8g_fntpgm_uint8_t fontpage_8_172_172[30] U8G_FONT_SECTION("fontpage_8_172_172") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xac,0xac,0x00,0x07,0x00,0x00, + 0x00,0x04,0x07,0x07,0x06,0x01,0x00,0x80,0x80,0x80,0xe0,0x90,0x90,0xe0}; +const u8g_fntpgm_uint8_t fontpage_8_175_201[334] U8G_FONT_SECTION("fontpage_8_175_201") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xaf,0xc9,0x00,0x08,0xfe,0x00, + 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x78,0x88,0x88,0x78,0x28,0x48,0x88,0x05,0x05, + 0x05,0x06,0x00,0x00,0x70,0x08,0x78,0x88,0x78,0x05,0x07,0x07,0x06,0x00,0x00,0x70, + 0x80,0xf0,0x88,0x88,0x88,0x70,0x05,0x05,0x05,0x06,0x00,0x00,0xf0,0x88,0xf0,0x88, + 0xf0,0x05,0x05,0x05,0x06,0x00,0x00,0xf8,0x80,0x80,0x80,0x80,0x05,0x06,0x06,0x06, + 0x00,0xff,0x30,0x50,0x50,0x50,0xf8,0x88,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x88, + 0xf0,0x80,0x70,0x05,0x05,0x05,0x06,0x00,0x00,0xa8,0x70,0x20,0x70,0xa8,0x05,0x05, + 0x05,0x06,0x00,0x00,0x70,0x88,0x30,0x88,0x70,0x05,0x05,0x05,0x06,0x00,0x00,0x88, + 0x98,0xa8,0xc8,0x88,0x05,0x08,0x08,0x06,0x00,0x00,0x88,0x70,0x00,0x88,0x98,0xa8, + 0xc8,0x88,0x04,0x05,0x05,0x06,0x01,0x00,0x90,0xa0,0xc0,0xa0,0x90,0x05,0x05,0x05, + 0x06,0x00,0x00,0x38,0x48,0x48,0x48,0x88,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0xd8, + 0xa8,0x88,0x88,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x88,0xf8,0x88,0x88,0x05,0x05, + 0x05,0x06,0x00,0x00,0x70,0x88,0x88,0x88,0x70,0x05,0x05,0x05,0x06,0x00,0x00,0xf8, + 0x88,0x88,0x88,0x88,0x05,0x07,0x07,0x06,0x00,0xfe,0xf0,0x88,0x88,0x88,0xf0,0x80, + 0x80,0x05,0x05,0x05,0x06,0x00,0x00,0x70,0x88,0x80,0x88,0x70,0x05,0x05,0x05,0x06, + 0x00,0x00,0xf8,0x20,0x20,0x20,0x20,0x05,0x07,0x07,0x06,0x00,0xfe,0x88,0x88,0x88, + 0x88,0x78,0x08,0x70,0x05,0x09,0x09,0x06,0x00,0xfe,0x20,0x20,0x70,0xa8,0xa8,0xa8, + 0x70,0x20,0x20,0x05,0x05,0x05,0x06,0x00,0x00,0x88,0x50,0x20,0x50,0x88,0x05,0x07, + 0x07,0x06,0x00,0xfe,0x90,0x90,0x90,0x90,0xf8,0x08,0x08,0x05,0x05,0x05,0x06,0x00, + 0x00,0x88,0x88,0x78,0x08,0x08,0x05,0x05,0x05,0x06,0x00,0x00,0xa8,0xa8,0xa8,0xa8, + 0xf8,0x05,0x07,0x07,0x06,0x00,0xfe,0xa8,0xa8,0xa8,0xa8,0xf8,0x08,0x08}; const u8g_fntpgm_uint8_t fontpage_8_204_204[28] U8G_FONT_SECTION("fontpage_8_204_204") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xcc,0xcc,0x00,0x05,0x00,0x00, 0x00,0x04,0x05,0x05,0x06,0x01,0x00,0x80,0x80,0xe0,0x90,0xe0}; @@ -72,22 +67,19 @@ const u8g_fntpgm_uint8_t fontpage_8_206_207[39] U8G_FONT_SECTION("fontpage_8_206 const u8g_fntpgm_uint8_t fontpage_8_212_212[28] U8G_FONT_SECTION("fontpage_8_212_212") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd4,0xd4,0x00,0x05,0x00,0x00, 0x00,0x04,0x05,0x05,0x06,0x01,0x00,0x70,0x80,0xe0,0x80,0x70}; -const u8g_fntpgm_uint8_t fontpage_8_214_214[29] U8G_FONT_SECTION("fontpage_8_214_214") = { - 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd6,0xd6,0x00,0x06,0x00,0x00, - 0x00,0x03,0x06,0x06,0x06,0x01,0x00,0x40,0x00,0xc0,0x40,0x40,0xe0}; +const u8g_fntpgm_uint8_t fontpage_8_214_215[41] U8G_FONT_SECTION("fontpage_8_214_215") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd6,0xd7,0x00,0x06,0x00,0x00, + 0x00,0x03,0x06,0x06,0x06,0x01,0x00,0x40,0x00,0xc0,0x40,0x40,0xe0,0x03,0x06,0x06, + 0x06,0x01,0x00,0xa0,0x00,0xc0,0x40,0x40,0xe0}; #define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { FONTDATA_ITEM(8, 134, 134, fontpage_8_134_134), // 'І' -- 'І' - FONTDATA_ITEM(8, 144, 146, fontpage_8_144_146), // 'А' -- 'В' - FONTDATA_ITEM(8, 148, 149, fontpage_8_148_149), // 'Д' -- 'Е' - FONTDATA_ITEM(8, 151, 154, fontpage_8_151_154), // 'З' -- 'К' - FONTDATA_ITEM(8, 156, 164, fontpage_8_156_164), // 'М' -- 'Ф' - FONTDATA_ITEM(8, 166, 166, fontpage_8_166_166), // 'Ц' -- 'Ц' - FONTDATA_ITEM(8, 168, 168, fontpage_8_168_168), // 'Ш' -- 'Ш' - FONTDATA_ITEM(8, 176, 201, fontpage_8_176_201), // 'а' -- 'щ' + FONTDATA_ITEM(8, 144, 169, fontpage_8_144_169), // 'А' -- 'Щ' + FONTDATA_ITEM(8, 172, 172, fontpage_8_172_172), // 'Ь' -- 'Ь' + FONTDATA_ITEM(8, 175, 201, fontpage_8_175_201), // 'Я' -- 'щ' FONTDATA_ITEM(8, 204, 204, fontpage_8_204_204), // 'ь' -- 'ь' FONTDATA_ITEM(8, 206, 207, fontpage_8_206_207), // 'ю' -- 'я' FONTDATA_ITEM(8, 212, 212, fontpage_8_212_212), // 'є' -- 'є' - FONTDATA_ITEM(8, 214, 214, fontpage_8_214_214), // 'і' -- 'і' + FONTDATA_ITEM(8, 214, 215, fontpage_8_214_215), // 'і' -- 'ї' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_zh_CN.h b/Marlin/src/lcd/dogm/fontdata/langdata_zh_CN.h index de697cbef46d..af39ce5c4815 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_zh_CN.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_zh_CN.h @@ -5,6 +5,9 @@ */ #include +const u8g_fntpgm_uint8_t fontpage_64_157_157[26] U8G_FONT_SECTION("fontpage_64_157_157") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x9d,0x9d,0x00,0x07,0x00,0x00, + 0x00,0x05,0x03,0x03,0x06,0x00,0x04,0xd8,0x48,0x90}; const u8g_fntpgm_uint8_t fontpage_69_191_191[28] U8G_FONT_SECTION("fontpage_69_191_191") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xbf,0xbf,0x00,0x05,0x00,0x00, 0x00,0x05,0x05,0x05,0x06,0x00,0x00,0x08,0x18,0x28,0x48,0xf8}; @@ -381,6 +384,10 @@ const u8g_fntpgm_uint8_t fontpage_172_232_232[45] U8G_FONT_SECTION("fontpage_172 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe8,0xe8,0x00,0x0a,0xff,0x00, 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x7b,0xc0,0x4a,0x40,0x4a,0x40,0x7b,0xc0,0x04, 0x80,0xff,0xe0,0x11,0x00,0xfb,0xe0,0x4a,0x40,0x4a,0x40,0x7b,0xc0}; +const u8g_fntpgm_uint8_t fontpage_172_244_244[45] U8G_FONT_SECTION("fontpage_172_244_244") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xf4,0xf4,0x00,0x0a,0xff,0x00, + 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x01,0x00,0xef,0xe0,0xa5,0x40,0xaf,0xe0,0xa4, + 0x40,0xa7,0xc0,0xe4,0x40,0x07,0xc0,0x04,0x40,0x07,0xc0,0x0c,0x60}; const u8g_fntpgm_uint8_t fontpage_173_222_222[45] U8G_FONT_SECTION("fontpage_173_222_222") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xde,0xde,0x00,0x0a,0xff,0x00, 0x00,0x0a,0x0b,0x16,0x0c,0x01,0xff,0xff,0xc0,0x80,0x40,0x80,0x40,0x9e,0x40,0x92, @@ -941,6 +948,10 @@ const u8g_fntpgm_uint8_t fontpage_221_209_209[45] U8G_FONT_SECTION("fontpage_221 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd1,0xd1,0x00,0x0a,0xff,0x00, 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x47,0xc0,0x24,0x40,0x07,0x40,0x85,0x40,0x5f, 0xe0,0x34,0x60,0x27,0xc0,0xc4,0x40,0x47,0xc0,0x44,0x40,0x44,0xc0}; +const u8g_fntpgm_uint8_t fontpage_222_143_143[45] U8G_FONT_SECTION("fontpage_222_143_143") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0x8f,0x8f,0x00,0x0a,0xff,0x00, + 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x4f,0xe0,0x28,0x20,0x0f,0xe0,0x98,0x00,0x5f, + 0xe0,0x29,0x00,0x2f,0xe0,0xcd,0xa0,0x4b,0x60,0x5d,0xa0,0x49,0x60}; const u8g_fntpgm_uint8_t fontpage_223_192_192[45] U8G_FONT_SECTION("fontpage_223_192_192") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc0,0xc0,0x00,0x0a,0xff,0x00, 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x44,0x80,0x3e,0x80,0x12,0xe0,0x9e,0xa0,0x53, @@ -1145,6 +1156,10 @@ const u8g_fntpgm_uint8_t fontpage_259_234_234[34] U8G_FONT_SECTION("fontpage_259 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xea,0xea,0x00,0x0a,0xff,0x00, 0x00,0x07,0x0b,0x0b,0x0c,0x02,0xff,0x20,0xfe,0x82,0x82,0xfe,0x82,0xfe,0x82,0x82, 0xfe,0x82}; +const u8g_fntpgm_uint8_t fontpage_259_243_243[45] U8G_FONT_SECTION("fontpage_259_243_243") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xf3,0xf3,0x00,0x0a,0xff,0x00, + 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x7f,0xc0,0x08,0x00,0x11,0x00,0x20,0x80,0x7f, + 0xc0,0x04,0x00,0x04,0x00,0x3f,0x80,0x04,0x00,0x04,0x00,0xff,0xe0}; const u8g_fntpgm_uint8_t fontpage_263_220_220[45] U8G_FONT_SECTION("fontpage_263_220_220") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xdc,0xdc,0x00,0x0a,0xff,0x00, 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x11,0x00,0xff,0xe0,0x11,0x00,0x01,0xc0,0x7e, @@ -1257,6 +1272,10 @@ const u8g_fntpgm_uint8_t fontpage_287_185_185[45] U8G_FONT_SECTION("fontpage_287 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xb9,0xb9,0x00,0x0a,0xff,0x00, 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x41,0x00,0x21,0x00,0x2f,0xe0,0x01,0x20,0xe1, 0x20,0x21,0x20,0x22,0x20,0x24,0x20,0x28,0xc0,0x50,0x00,0x8f,0xe0}; +const u8g_fntpgm_uint8_t fontpage_287_193_193[45] U8G_FONT_SECTION("fontpage_287_193_193") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xc1,0xc1,0x00,0x0a,0xff,0x00, + 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x40,0xc0,0x27,0x00,0x21,0x00,0x01,0x00,0xef, + 0xe0,0x21,0x00,0x21,0x00,0x21,0x00,0x21,0x00,0x50,0x00,0x8f,0xe0}; const u8g_fntpgm_uint8_t fontpage_287_208_209[73] U8G_FONT_SECTION("fontpage_287_208_209") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd0,0xd1,0x00,0x0a,0xff,0x00, 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0x47,0xc0,0x20,0x00,0x20,0x00,0x0f,0xe0,0xe2, @@ -1355,6 +1374,10 @@ const u8g_fntpgm_uint8_t fontpage_300_205_205[45] U8G_FONT_SECTION("fontpage_300 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xcd,0xcd,0x00,0x0a,0xff,0x00, 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0xf2,0x00,0x93,0xe0,0xa6,0x40,0xc1,0x80,0xa6, 0x60,0x91,0x00,0x97,0xe0,0xd5,0x00,0xaf,0xe0,0x81,0x00,0x81,0x00}; +const u8g_fntpgm_uint8_t fontpage_300_208_208[45] U8G_FONT_SECTION("fontpage_300_208_208") = { + 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xd0,0xd0,0x00,0x0a,0xff,0x00, + 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0xf7,0xc0,0x94,0x40,0xa7,0xc0,0xc4,0x40,0xa7, + 0xc0,0x95,0x00,0x95,0x20,0xd5,0x40,0xa4,0x80,0x85,0x40,0x86,0x20}; const u8g_fntpgm_uint8_t fontpage_300_228_228[45] U8G_FONT_SECTION("fontpage_300_228_228") = { 0x00,0x0c,0x0f,0x00,0xfe,0x00,0x00,0x00,0x00,0x00,0xe4,0xe4,0x00,0x0a,0xff,0x00, 0x00,0x0b,0x0b,0x16,0x0c,0x00,0xff,0xf1,0x00,0x92,0x80,0xa4,0x40,0xcb,0xa0,0xa1, @@ -1445,6 +1468,7 @@ const u8g_fntpgm_uint8_t fontpage_510_154_154[30] U8G_FONT_SECTION("fontpage_510 #define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { + FONTDATA_ITEM(64, 157, 157, fontpage_64_157_157), // '”' -- '”' FONTDATA_ITEM(69, 191, 191, fontpage_69_191_191), // '⊿' -- '⊿' FONTDATA_ITEM(156, 128, 128, fontpage_156_128_128), // '一' -- '一' FONTDATA_ITEM(156, 137, 139, fontpage_156_137_139), // '三' -- '下' @@ -1533,6 +1557,7 @@ static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { FONTDATA_ITEM(171, 183, 183, fontpage_171_183_183), // '喷' -- '喷' FONTDATA_ITEM(172, 180, 180, fontpage_172_180_180), // '嘴' -- '嘴' FONTDATA_ITEM(172, 232, 232, fontpage_172_232_232), // '器' -- '器' + FONTDATA_ITEM(172, 244, 244, fontpage_172_244_244), // '噴' -- '噴' FONTDATA_ITEM(173, 222, 222, fontpage_173_222_222), // '回' -- '回' FONTDATA_ITEM(173, 224, 224, fontpage_173_224_224), // '因' -- '因' FONTDATA_ITEM(173, 250, 250, fontpage_173_250_250), // '固' -- '固' @@ -1671,6 +1696,7 @@ static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { FONTDATA_ITEM(221, 144, 144, fontpage_221_144_144), // '源' -- '源' FONTDATA_ITEM(221, 162, 162, fontpage_221_162_162), // '溢' -- '溢' FONTDATA_ITEM(221, 209, 209, fontpage_221_209_209), // '滑' -- '滑' + FONTDATA_ITEM(222, 143, 143, fontpage_222_143_143), // '漏' -- '漏' FONTDATA_ITEM(223, 192, 192, fontpage_223_192_192), // '激' -- '激' FONTDATA_ITEM(224, 239, 239, fontpage_224_239_239), // '灯' -- '灯' FONTDATA_ITEM(225, 185, 185, fontpage_225_185_185), // '点' -- '点' @@ -1722,6 +1748,7 @@ static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { FONTDATA_ITEM(256, 234, 234, fontpage_256_234_234), // '聪' -- '聪' FONTDATA_ITEM(257, 253, 253, fontpage_257_253_253), // '能' -- '能' FONTDATA_ITEM(259, 234, 234, fontpage_259_234_234), // '自' -- '自' + FONTDATA_ITEM(259, 243, 243, fontpage_259_243_243), // '至' -- '至' FONTDATA_ITEM(263, 220, 220, fontpage_263_220_220), // '菜' -- '菜' FONTDATA_ITEM(265, 221, 221, fontpage_265_221_221), // '蓝' -- '蓝' FONTDATA_ITEM(269, 199, 199, fontpage_269_199_199), // '蛇' -- '蛇' @@ -1750,6 +1777,7 @@ static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { FONTDATA_ITEM(287, 145, 145, fontpage_287_145_145), // '辑' -- '辑' FONTDATA_ITEM(287, 147, 147, fontpage_287_147_147), // '输' -- '输' FONTDATA_ITEM(287, 185, 185, fontpage_287_185_185), // '边' -- '边' + FONTDATA_ITEM(287, 193, 193, fontpage_287_193_193), // '迁' -- '迁' FONTDATA_ITEM(287, 208, 209, fontpage_287_208_209), // '运' -- '近' FONTDATA_ITEM(287, 212, 212, fontpage_287_212_212), // '返' -- '返' FONTDATA_ITEM(287, 216, 216, fontpage_287_216_216), // '还' -- '还' @@ -1774,6 +1802,7 @@ static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { FONTDATA_ITEM(299, 244, 244, fontpage_299_244_244), // '间' -- '间' FONTDATA_ITEM(300, 136, 136, fontpage_300_136_136), // '阈' -- '阈' FONTDATA_ITEM(300, 205, 205, fontpage_300_205_205), // '降' -- '降' + FONTDATA_ITEM(300, 208, 208, fontpage_300_208_208), // '限' -- '限' FONTDATA_ITEM(300, 228, 228, fontpage_300_228_228), // '除' -- '除' FONTDATA_ITEM(300, 233, 233, fontpage_300_233_233), // '险' -- '险' FONTDATA_ITEM(301, 246, 246, fontpage_301_246_246), // '零' -- '零' diff --git a/Marlin/src/lcd/dogm/lcdprint_u8g.cpp b/Marlin/src/lcd/dogm/lcdprint_u8g.cpp index c9a55a16e3b4..a6bdb373dd70 100644 --- a/Marlin/src/lcd/dogm/lcdprint_u8g.cpp +++ b/Marlin/src/lcd/dogm/lcdprint_u8g.cpp @@ -9,7 +9,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "ultralcd_DOGM.h" @@ -53,4 +53,4 @@ int lcd_put_u8str_max_P(PGM_P utf8_str_P, pixel_len_t max_length) { return ret; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp index 4b51c2949b23..82b6e768c6ad 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp @@ -27,7 +27,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD && DISABLED(LIGHTWEIGHT_UI) +#if HAS_MARLINUI_U8GLIB && DISABLED(LIGHTWEIGHT_UI) #include "dogm_Statusscreen.h" #include "ultralcd_DOGM.h" @@ -913,4 +913,4 @@ void MarlinUI::draw_status_message(const bool blink) { #endif } -#endif // HAS_GRAPHICAL_LCD && !LIGHTWEIGHT_UI +#endif // HAS_MARLINUI_U8GLIB && !LIGHTWEIGHT_UI diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp index 211acc86c6d4..806f370db327 100644 --- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp @@ -11,7 +11,6 @@ * any later version. The code is distributed WITHOUT ANY WARRANTY; * without even the implied warranty of MERCHANTABILITY or FITNESS * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. - * */ /** diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h index 9f0815d099ce..b21724648484 100644 --- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.h @@ -11,7 +11,6 @@ * any later version. The code is distributed WITHOUT ANY WARRANTY; * without even the implied warranty of MERCHANTABILITY or FITNESS * FOR A PARTICULAR PURPOSE. See the GNU GPL for more details. - * */ #pragma once diff --git a/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp b/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp index 70cb7c66d793..f97a323350ee 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_ssd1306_sh1106_128x64_I2C.cpp @@ -67,7 +67,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "HAL_LCD_com_defines.h" @@ -300,4 +300,4 @@ uint8_t u8g_WriteEscSeqP_2_wire(u8g_t *u8g, u8g_dev_t *dev, const uint8_t *esc_s return 1; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp index e70b3671b541..84c10dbb4d2e 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp @@ -55,7 +55,7 @@ #include "../../inc/MarlinConfig.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include #include "HAL_LCD_com_defines.h" @@ -233,4 +233,4 @@ u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_sw_spi = { u8g_dev_st7565_64128n_HAL_2x_f U8G_PB_DEV(u8g_dev_st7565_64128n_HAL_hw_spi, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_st7565_64128n_HAL_fn, U8G_COM_HAL_HW_SPI_FN); u8g_dev_t u8g_dev_st7565_64128n_HAL_2x_hw_spi = { u8g_dev_st7565_64128n_HAL_2x_fn, &u8g_dev_st7565_64128n_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN }; -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp index 838bee0ffc4c..740436d93c07 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_st7920_128x64_HAL.cpp @@ -55,7 +55,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "HAL_LCD_com_defines.h" @@ -205,4 +205,4 @@ u8g_dev_t u8g_dev_st7920_128x64_HAL_4x_hw_spi = { u8g_dev_st7920_128x64_HAL_4x_f u8g_dev_t u8g_dev_st7920_128x64_rrd_sw_spi = { u8g_dev_st7920_128x64_HAL_4x_fn, &u8g_dev_st7920_128x64_HAL_4x_pb, U8G_COM_ST7920_HAL_SW_SPI }; #endif -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp b/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp index 39c294defe5b..0f53e45a27b5 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp @@ -51,12 +51,11 @@ * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * */ #include "../../inc/MarlinConfig.h" -#if HAS_GRAPHICAL_LCD && (PIN_EXISTS(FSMC_CS) || ENABLED(SPI_GRAPHICAL_TFT)) +#if HAS_MARLINUI_U8GLIB && (PIN_EXISTS(FSMC_CS) || ENABLED(SPI_GRAPHICAL_TFT)) #include "HAL_LCD_com_defines.h" #include "ultralcd_DOGM.h" @@ -813,4 +812,4 @@ uint8_t u8g_com_hal_tft_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_p U8G_PB_DEV(u8g_dev_tft_320x240_upscale_from_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_tft_320x240_upscale_from_128x64_fn, U8G_COM_HAL_TFT_FN); -#endif // HAS_GRAPHICAL_LCD && FSMC_CS +#endif // HAS_MARLINUI_U8GLIB && FSMC_CS diff --git a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp index e4e387c1907f..172afbd76647 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_uc1701_mini12864_HAL.cpp @@ -55,7 +55,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "HAL_LCD_com_defines.h" @@ -210,4 +210,4 @@ u8g_pb_t u8g_dev_uc1701_mini12864_HAL_2x_pb = { {16, HEIGHT, 0, 0, 0}, WIDTH, u u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_sw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_SW_SPI_FN }; u8g_dev_t u8g_dev_uc1701_mini12864_HAL_2x_hw_spi = { u8g_dev_uc1701_mini12864_HAL_2x_fn, &u8g_dev_uc1701_mini12864_HAL_2x_pb, U8G_COM_HAL_HW_SPI_FN }; -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/u8g_fontutf8.cpp b/Marlin/src/lcd/dogm/u8g_fontutf8.cpp index 370b177470ec..89bdb09e1be2 100644 --- a/Marlin/src/lcd/dogm/u8g_fontutf8.cpp +++ b/Marlin/src/lcd/dogm/u8g_fontutf8.cpp @@ -9,7 +9,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include #include "../fontutils.h" @@ -312,4 +312,4 @@ int uxg_GetUtf8StrPixelWidthP(u8g_t *pu8g, PGM_P utf8_msg) { return data.adv; } -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp index b4f32d3343a1..c48abac81016 100644 --- a/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp +++ b/Marlin/src/lcd/dogm/ultralcd_DOGM.cpp @@ -37,7 +37,7 @@ #include "../../inc/MarlinConfigPre.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "ultralcd_DOGM.h" #include "u8g_fontutf8.h" @@ -687,4 +687,4 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop #endif // HAS_LCD_MENU -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB diff --git a/Marlin/src/lcd/dwin/e3v2/dwin.cpp b/Marlin/src/lcd/dwin/e3v2/dwin.cpp index c0096d379de6..85263a89abf7 100644 --- a/Marlin/src/lcd/dwin/e3v2/dwin.cpp +++ b/Marlin/src/lcd/dwin/e3v2/dwin.cpp @@ -151,7 +151,7 @@ constexpr uint16_t TROWS = 6, MROWS = TROWS - 1, // Total rows, and other /* Value Init */ HMI_value_t HMI_ValueStruct; -HMI_Flag HMI_flag{0}; +HMI_Flag_t HMI_flag{0}; millis_t dwin_heat_time = 0; @@ -173,7 +173,6 @@ select_t select_page{0}, select_file{0}, select_print{0}, select_prepare{0} , select_acc{0} , select_jerk{0} , select_step{0} - // , select_leveling{0} ; uint8_t index_file = MROWS, @@ -208,22 +207,24 @@ uint16_t remain_time = 0; #define DWIN_LANGUAGE_EEPROM_ADDRESS 0x01 // Between 0x01 and 0x63 (EEPROM_OFFSET-1) // BL24CXX::check() uses 0x00 +inline bool HMI_IsChinese() { return HMI_flag.language == DWIN_CHINESE; } + void HMI_SetLanguageCache() { - DWIN_JPG_CacheTo1(HMI_flag.language_chinese ? Language_Chinese : Language_English); + DWIN_JPG_CacheTo1(HMI_IsChinese() ? Language_Chinese : Language_English); } void HMI_SetLanguage() { #if ENABLED(EEPROM_SETTINGS) - BL24CXX::read(DWIN_LANGUAGE_EEPROM_ADDRESS, (uint8_t*)&HMI_flag.language_chinese, sizeof(HMI_flag.language_chinese)); + BL24CXX::read(DWIN_LANGUAGE_EEPROM_ADDRESS, (uint8_t*)&HMI_flag.language, sizeof(HMI_flag.language)); #endif HMI_SetLanguageCache(); } void HMI_ToggleLanguage() { - HMI_flag.language_chinese ^= true; + HMI_flag.language = HMI_IsChinese() ? DWIN_ENGLISH : DWIN_CHINESE; HMI_SetLanguageCache(); #if ENABLED(EEPROM_SETTINGS) - BL24CXX::write(DWIN_LANGUAGE_EEPROM_ADDRESS, (uint8_t*)&HMI_flag.language_chinese, sizeof(HMI_flag.language_chinese)); + BL24CXX::write(DWIN_LANGUAGE_EEPROM_ADDRESS, (uint8_t*)&HMI_flag.language, sizeof(HMI_flag.language)); #endif } @@ -242,14 +243,14 @@ void ICON_Print() { if (select_page.now == 0) { DWIN_ICON_Show(ICON, ICON_Print_1, 17, 130); DWIN_Draw_Rectangle(0, Color_White, 17, 130, 126, 229); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 1, 447, 28, 460, 58, 201); else DWIN_Frame_AreaCopy(1, 1, 451, 31, 463, 57, 201); } else { DWIN_ICON_Show(ICON, ICON_Print_0, 17, 130); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 1, 405, 28, 420, 58, 201); else DWIN_Frame_AreaCopy(1, 1, 423, 31, 435, 57, 201); @@ -260,14 +261,14 @@ void ICON_Prepare() { if (select_page.now == 1) { DWIN_ICON_Show(ICON, ICON_Prepare_1, 145, 130); DWIN_Draw_Rectangle(0, Color_White, 145, 130, 254, 229); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 31, 447, 58, 460, 186, 201); else DWIN_Frame_AreaCopy(1, 33, 451, 82, 466, 175, 201); } else { DWIN_ICON_Show(ICON, ICON_Prepare_0, 145, 130); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 31, 405, 58, 420, 186, 201); else DWIN_Frame_AreaCopy(1, 33, 423, 82, 438, 175, 201); @@ -278,14 +279,14 @@ void ICON_Control() { if (select_page.now == 2) { DWIN_ICON_Show(ICON, ICON_Control_1, 17, 246); DWIN_Draw_Rectangle(0, Color_White, 17, 246, 126, 345); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 61, 447, 88, 460, 58, 318); else DWIN_Frame_AreaCopy(1, 85, 451, 132, 463, 48, 318); } else { DWIN_ICON_Show(ICON, ICON_Control_0, 17, 246); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 61, 405, 88, 420, 58, 318); else DWIN_Frame_AreaCopy(1, 85, 423, 132, 434, 48, 318); @@ -296,14 +297,14 @@ void ICON_StartInfo(bool show) { if (show) { DWIN_ICON_Show(ICON, ICON_Info_1, 145, 246); DWIN_Draw_Rectangle(0, Color_White, 145, 246, 254, 345); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 91, 447, 118, 460, 186, 318); else DWIN_Frame_AreaCopy(1, 132, 451, 159, 466, 186, 318); } else { DWIN_ICON_Show(ICON, ICON_Info_0, 145, 246); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 91, 405, 118, 420, 186, 318); else DWIN_Frame_AreaCopy(1, 132, 423, 159, 435, 186, 318); @@ -314,14 +315,14 @@ void ICON_Leveling(bool show) { if (show) { DWIN_ICON_Show(ICON, ICON_Leveling_1, 145, 246); DWIN_Draw_Rectangle(0, Color_White, 145, 246, 254, 345); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 211, 447, 238, 460, 186, 318); else DWIN_Frame_AreaCopy(1, 84, 437, 120, 449, 182, 318); } else { DWIN_ICON_Show(ICON, ICON_Leveling_0, 145, 246); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 211, 405, 238, 420, 186, 318); else DWIN_Frame_AreaCopy(1, 84, 465, 120, 478, 182, 318); @@ -332,14 +333,14 @@ void ICON_Tune() { if (select_print.now == 0) { DWIN_ICON_Show(ICON, ICON_Setup_1, 8, 252); DWIN_Draw_Rectangle(0, Color_White, 8, 252, 87, 351); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 121, 447, 148, 458, 34, 325); else DWIN_Frame_AreaCopy(1, 0, 466, 34, 476, 31, 325); } else { DWIN_ICON_Show(ICON, ICON_Setup_0, 8, 252); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 121, 405, 148, 420, 34, 325); else DWIN_Frame_AreaCopy(1, 0, 438, 32, 448, 31, 325); @@ -350,14 +351,14 @@ void ICON_Pause() { if (select_print.now == 1) { DWIN_ICON_Show(ICON, ICON_Pause_1, 96, 252); DWIN_Draw_Rectangle(0, Color_White, 96, 252, 175, 351); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 181, 447, 208, 459, 124, 325); else DWIN_Frame_AreaCopy(1, 177, 451, 216, 462, 116, 325); } else { DWIN_ICON_Show(ICON, ICON_Pause_0, 96, 252); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 181, 405, 208, 420, 124, 325); else DWIN_Frame_AreaCopy(1, 177, 423, 215, 433, 116, 325); @@ -368,14 +369,14 @@ void ICON_Continue() { if (select_print.now == 1) { DWIN_ICON_Show(ICON, ICON_Continue_1, 96, 252); DWIN_Draw_Rectangle(0, Color_White, 96, 252, 175, 351); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 1, 447, 28, 460, 124, 325); else DWIN_Frame_AreaCopy(1, 1, 452, 32, 464, 121, 325); } else { DWIN_ICON_Show(ICON, ICON_Continue_0, 96, 252); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 1, 405, 28, 420, 124, 325); else DWIN_Frame_AreaCopy(1, 1, 424, 31, 434, 121, 325); @@ -386,14 +387,14 @@ void ICON_Stop() { if (select_print.now == 2) { DWIN_ICON_Show(ICON, ICON_Stop_1, 184, 252); DWIN_Draw_Rectangle(0, Color_White, 184, 252, 263, 351); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 151, 447, 178, 459, 210, 325); else DWIN_Frame_AreaCopy(1, 218, 452, 249, 466, 209, 325); } else { DWIN_ICON_Show(ICON, ICON_Stop_0, 184, 252); - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 151, 405, 178, 420, 210, 325); else DWIN_Frame_AreaCopy(1, 218, 423, 247, 436, 209, 325); @@ -481,7 +482,7 @@ inline void Draw_Menu_Line(const uint8_t line, const uint8_t icon=0, const char // The "Back" label is always on the first line inline void Draw_Back_Label() { - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 129, 72, 156, 84, LBLX, MBASE(0)); else DWIN_Frame_AreaCopy(1, 226, 179, 256, 189, LBLX, MBASE(0)); @@ -563,7 +564,7 @@ inline void draw_move_en(const uint16_t line) { inline void DWIN_Frame_TitleCopy(uint8_t id, uint16_t x1, uint16_t y1, uint16_t x2, uint16_t y2) { DWIN_Frame_AreaCopy(id, x1, y1, x2, y2, 14, 8); } inline void Item_Prepare_Move(const uint8_t row) { - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 159, 70, 200, 84, LBLX, MBASE(row)); else draw_move_en(MBASE(row)); // "Move >" @@ -572,7 +573,7 @@ inline void Item_Prepare_Move(const uint8_t row) { } inline void Item_Prepare_Disable(const uint8_t row) { - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 204, 70, 259, 82, LBLX, MBASE(row)); else DWIN_Frame_AreaCopy(1, 103, 59, 200, 74, LBLX, MBASE(row)); // "Disable Stepper" @@ -580,7 +581,7 @@ inline void Item_Prepare_Disable(const uint8_t row) { } inline void Item_Prepare_Home(const uint8_t row) { - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 0, 89, 41, 101, LBLX, MBASE(row)); else DWIN_Frame_AreaCopy(1, 202, 61, 271, 71, LBLX, MBASE(row)); // "Auto Home" @@ -590,7 +591,7 @@ inline void Item_Prepare_Home(const uint8_t row) { #if HAS_ZOFFSET_ITEM inline void Item_Prepare_Offset(const uint8_t row) { - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { #if HAS_BED_PROBE DWIN_Frame_AreaCopy(1, 174, 164, 223, 177, LBLX, MBASE(row)); DWIN_Draw_Signed_Float(font8x16, Color_Bg_Black, 2, 2, 202, MBASE(row), BABY_Z_VAR * 100); @@ -613,7 +614,7 @@ inline void Item_Prepare_Home(const uint8_t row) { #if HAS_HOTEND inline void Item_Prepare_PLA(const uint8_t row) { - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 100, 89, 151, 101, LBLX, MBASE(row)); } else { @@ -624,7 +625,7 @@ inline void Item_Prepare_Home(const uint8_t row) { } inline void Item_Prepare_ABS(const uint8_t row) { - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 180, 89, 233, 100, LBLX, MBASE(row)); } else { @@ -637,7 +638,7 @@ inline void Item_Prepare_Home(const uint8_t row) { #if HAS_PREHEAT inline void Item_Prepare_Cool(const uint8_t row) { - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 1, 104, 56, 117, LBLX, MBASE(row)); else DWIN_Frame_AreaCopy(1, 200, 76, 264, 86, LBLX, MBASE(row)); // "Cooldown" @@ -646,7 +647,7 @@ inline void Item_Prepare_Home(const uint8_t row) { #endif inline void Item_Prepare_Lang(const uint8_t row) { - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 239, 134, 266, 146, LBLX, MBASE(row)); DWIN_Draw_String(false, false, font8x16, Color_White, Color_Bg_Black, 226, MBASE(row), F("CN")); } @@ -664,7 +665,7 @@ inline void Draw_Prepare_Menu() { #define PSCROL(L) (scroll + (L)) #define PVISI(L) WITHIN(PSCROL(L), 0, MROWS) - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 133, 1, 160, 13); // "Prepare" } else { @@ -708,7 +709,7 @@ inline void Draw_Control_Menu() { if (CVISI(0)) Draw_Back_First(select_control.now == 0); // < Back - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 103, 1, 130, 14); // "Control" DWIN_Frame_AreaCopy(1, 57, 104, 84, 116, LBLX, CLINE(CONTROL_CASE_TEMP)); // Temperature > @@ -775,7 +776,7 @@ inline void Draw_Control_Menu() { inline void Draw_Tune_Menu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 73, 2, 100, 13, 14, 9); DWIN_Frame_AreaCopy(1, 116, 164, 171, 176, LBLX, MBASE(TUNE_CASE_SPEED)); #if HAS_HOTEND @@ -881,7 +882,7 @@ inline void say_e(const uint16_t inset, const uint16_t line) { inline void Draw_Motion_Menu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 1, 16, 28, 28); // "Motion" DWIN_Frame_AreaCopy(1, 173, 133, 228, 147, LBLX, MBASE(MOTION_CASE_RATE)); // Max speed DWIN_Frame_AreaCopy(1, 173, 133, 200, 147, LBLX, MBASE(MOTION_CASE_ACCEL)); // Max... @@ -936,7 +937,7 @@ inline void Draw_Motion_Menu() { Draw_Popup_Bkgd_105(); if (toohigh) { DWIN_ICON_Show(ICON, ICON_TempTooHigh, 102, 165); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 103, 371, 237, 386, 52, 285); DWIN_Frame_AreaCopy(1, 151, 389, 185, 402, 187, 285); DWIN_Frame_AreaCopy(1, 189, 389, 271, 402, 95, 310); @@ -948,7 +949,7 @@ inline void Draw_Motion_Menu() { } else { DWIN_ICON_Show(ICON, ICON_TempTooLow, 102, 165); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 103, 371, 270, 386, 52, 285); DWIN_Frame_AreaCopy(1, 189, 389, 271, 402, 95, 310); } @@ -971,7 +972,7 @@ inline void Draw_Popup_Bkgd_60() { Clear_Main_Window(); Draw_Popup_Bkgd_60(); DWIN_ICON_Show(ICON, ICON_TempTooLow, 102, 105); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 103, 371, 136, 386, 69, 240); DWIN_Frame_AreaCopy(1, 170, 371, 270, 386, 102, 240); DWIN_ICON_Show(ICON, ICON_Confirm_C, 86, 280); @@ -987,18 +988,18 @@ inline void Draw_Popup_Bkgd_60() { void Popup_Window_Resume() { Clear_Popup_Area(); Draw_Popup_Bkgd_105(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 160, 338, 235, 354, 98, 135); DWIN_Frame_AreaCopy(1, 103, 321, 271, 335, 52, 192); - DWIN_ICON_Show(ICON, ICON_Continue_C, 26, 307); - DWIN_ICON_Show(ICON, ICON_Cancel_C, 146, 307); + DWIN_ICON_Show(ICON, ICON_Cancel_C, 26, 307); + DWIN_ICON_Show(ICON, ICON_Continue_C, 146, 307); } else { DWIN_Draw_String(false, true, font8x16, Popup_Text_Color, Color_Bg_Window, (272 - 8 * 14) / 2, 115, F("Continue Print")); DWIN_Draw_String(false, true, font8x16, Popup_Text_Color, Color_Bg_Window, (272 - 8 * 22) / 2, 192, F("It looks like the last")); DWIN_Draw_String(false, true, font8x16, Popup_Text_Color, Color_Bg_Window, (272 - 8 * 22) / 2, 212, F("file was interrupted.")); - DWIN_ICON_Show(ICON, ICON_Continue_E, 26, 307); - DWIN_ICON_Show(ICON, ICON_Cancel_E, 146, 307); + DWIN_ICON_Show(ICON, ICON_Cancel_E, 26, 307); + DWIN_ICON_Show(ICON, ICON_Continue_E, 146, 307); } } @@ -1006,7 +1007,7 @@ void Popup_Window_Home(const bool parking/*=false*/) { Clear_Main_Window(); Draw_Popup_Bkgd_60(); DWIN_ICON_Show(ICON, ICON_BLTouch, 101, 105); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 0, 371, 33, 386, 85, 240); DWIN_Frame_AreaCopy(1, 203, 286, 271, 302, 118, 240); DWIN_Frame_AreaCopy(1, 0, 389, 150, 402, 61, 280); @@ -1023,7 +1024,7 @@ void Popup_Window_Home(const bool parking/*=false*/) { Clear_Main_Window(); Draw_Popup_Bkgd_60(); DWIN_ICON_Show(ICON, ICON_AutoLeveling, 101, 105); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 0, 371, 100, 386, 84, 240); DWIN_Frame_AreaCopy(1, 0, 389, 150, 402, 61, 280); } @@ -1048,7 +1049,7 @@ void Draw_Select_Highlight(const bool sel) { void Popup_window_PauseOrStop() { Clear_Main_Window(); Draw_Popup_Bkgd_60(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { if (select_print.now == 1) DWIN_Frame_AreaCopy(1, 237, 338, 269, 356, 98, 150); else if (select_print.now == 2) DWIN_Frame_AreaCopy(1, 221, 320, 253, 336, 98, 150); DWIN_Frame_AreaCopy(1, 220, 304, 264, 319, 130, 150); @@ -1065,7 +1066,7 @@ void Popup_window_PauseOrStop() { } void Draw_Printing_Screen() { - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 30, 1, 71, 14, 14, 9); // Tune DWIN_Frame_AreaCopy(1, 0, 72, 63, 86, 41, 188); // Pause DWIN_Frame_AreaCopy(1, 65, 72, 128, 86, 176, 188); // Stop @@ -1125,7 +1126,7 @@ void Goto_MainMenu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_AreaCopy(1, 2, 2, 27, 14, 14, 9); // "Home" } else { @@ -1631,7 +1632,6 @@ void update_variable() { * TODO: New code can follow the pattern of menu_media.cpp * and rely on Marlin caching for performance. No need to * cache files here. - * */ #ifndef strcasecmp_P @@ -1864,7 +1864,7 @@ inline void Draw_Info_Menu() { DWIN_Draw_String(false, false, font8x16, Color_White, Color_Bg_Black, (DWIN_WIDTH - strlen(MACHINE_SIZE) * MENU_CHR_W) / 2, 122, (char*)MACHINE_SIZE); DWIN_Draw_String(false, false, font8x16, Color_White, Color_Bg_Black, (DWIN_WIDTH - strlen(SHORT_BUILD_VERSION) * MENU_CHR_W) / 2, 195, (char*)SHORT_BUILD_VERSION); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 30, 17, 57, 29); // "Info" DWIN_Frame_AreaCopy(1, 197, 149, 252, 161, 108, 102); @@ -1895,7 +1895,7 @@ inline void Draw_Info_Menu() { inline void Draw_Print_File_Menu() { Clear_Title_Bar(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 0, 31, 55, 44); // "Print file" } else { @@ -2226,9 +2226,8 @@ void HMI_PauseOrStop() { dwin_abort_flag = true; #endif } - else { + else Goto_PrintProcess(); // cancel stop - } } } DWIN_UpdateLCD(); @@ -2237,7 +2236,7 @@ void HMI_PauseOrStop() { inline void Draw_Move_Menu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 192, 1, 233, 14); // "Move" DWIN_Frame_AreaCopy(1, 58, 118, 106, 132, LBLX, MBASE(1)); DWIN_Frame_AreaCopy(1, 109, 118, 157, 132, LBLX, MBASE(2)); @@ -2409,7 +2408,7 @@ void HMI_Prepare() { void Draw_Temperature_Menu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 236, 2, 263, 13); // "Temperature" #if HAS_HOTEND DWIN_Frame_AreaCopy(1, 1, 134, 56, 146, LBLX, MBASE(TEMP_CASE_TEMP)); @@ -2508,7 +2507,7 @@ void HMI_Control() { Draw_More_Icon(CONTROL_CASE_MOVE + MROWS - index_control); // Motion > if (index_control > MROWS) { Draw_More_Icon(CONTROL_CASE_INFO + MROWS - index_control); // Info > - if (HMI_flag.language_chinese) + if (HMI_IsChinese()) DWIN_Frame_AreaCopy(1, 231, 104, 258, 116, LBLX, MBASE(CONTROL_CASE_INFO - 1)); else DWIN_Frame_AreaCopy(1, 0, 104, 24, 114, LBLX, MBASE(CONTROL_CASE_INFO - 1)); @@ -2718,7 +2717,7 @@ void HMI_Temperature() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 59, 16, 139, 29); // "PLA Settings" DWIN_Frame_AreaCopy(1, 100, 89, 124, 101, LBLX, MBASE(PREHEAT_CASE_TEMP)); DWIN_Frame_AreaCopy(1, 1, 134, 56, 146, LBLX + 24, MBASE(PREHEAT_CASE_TEMP)); // PLA nozzle temp @@ -2792,7 +2791,7 @@ void HMI_Temperature() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 142, 16, 223, 29); // "ABS Settings" DWIN_Frame_AreaCopy(1, 180, 89, 204, 100, LBLX, MBASE(PREHEAT_CASE_TEMP)); @@ -2872,7 +2871,7 @@ void HMI_Temperature() { inline void Draw_Max_Speed_Menu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 1, 16, 28, 28); // "Max Speed (mm/s)" auto say_max_speed = [](const uint16_t row) { @@ -2934,7 +2933,7 @@ inline void Draw_Max_Speed_Menu() { inline void Draw_Max_Accel_Menu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 1, 16, 28, 28); // "Acceleration" DWIN_Frame_AreaCopy(1, 173, 133, 200, 147, LBLX, MBASE(1)); @@ -2985,7 +2984,7 @@ inline void Draw_Max_Accel_Menu() { inline void Draw_Max_Jerk_Menu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 1, 16, 28, 28); // "Jerk" DWIN_Frame_AreaCopy(1, 173, 133, 200, 147, LBLX , MBASE(1)); @@ -3055,7 +3054,7 @@ inline void Draw_Max_Jerk_Menu() { inline void Draw_Steps_Menu() { Clear_Main_Window(); - if (HMI_flag.language_chinese) { + if (HMI_IsChinese()) { DWIN_Frame_TitleCopy(1, 1, 16, 28, 28); // "Steps per mm" DWIN_Frame_AreaCopy(1, 153, 148, 194, 161, LBLX, MBASE(1)); @@ -3528,7 +3527,7 @@ void EachMomentUpdate() { // show print done confirm DWIN_Draw_Rectangle(1, Color_Bg_Black, 0, 250, DWIN_WIDTH - 1, STATUS_Y); - DWIN_ICON_Show(ICON, HMI_flag.language_chinese ? ICON_Confirm_C : ICON_Confirm_E, 86, 283); + DWIN_ICON_Show(ICON, HMI_IsChinese() ? ICON_Confirm_C : ICON_Confirm_E, 86, 283); } else if (HMI_flag.pause_flag != printingIsPaused()) { // print status update @@ -3598,45 +3597,30 @@ void EachMomentUpdate() { #if ENABLED(POWER_LOSS_RECOVERY) else if (DWIN_lcd_sd_status && recovery.dwin_flag) { // resume print before power off static bool recovery_flag = false; - recovery.dwin_flag = false; - recovery.load(); - if (!recovery.valid()) return recovery.purge(); + recovery.dwin_flag = false; + recovery_flag = true; - auto draw_first_option = [](const bool sel) { + auto update_selection = [&](const bool sel) { + HMI_flag.select_flag = sel; const uint16_t c1 = sel ? Color_Bg_Window : Select_Color; DWIN_Draw_Rectangle(0, c1, 25, 306, 126, 345); DWIN_Draw_Rectangle(0, c1, 24, 305, 127, 346); - }; - - auto update_selection = [&](const bool sel) { - HMI_flag.select_flag = sel; - draw_first_option(sel); const uint16_t c2 = sel ? Select_Color : Color_Bg_Window; DWIN_Draw_Rectangle(0, c2, 145, 306, 246, 345); DWIN_Draw_Rectangle(0, c2, 144, 305, 247, 346); }; - const uint16_t fileCnt = card.get_num_Files(); - for (uint16_t i = 0; i < fileCnt; i++) { - // TODO: Resume print via M1000 then update the UI - // with the active filename which can come from CardReader. - card.getfilename_sorted(SD_ORDER(i, fileCnt)); - if (!strcmp(card.filename, &recovery.info.sd_filename[1])) { // Resume print before power failure while have the same file - recovery_flag = true; - HMI_flag.select_flag = true; - Popup_Window_Resume(); - draw_first_option(false); - char * const name = card.longest_filename(); - const int8_t npos = _MAX(0, DWIN_WIDTH - strlen(name) * (MENU_CHR_W)) / 2; - DWIN_Draw_String(false, true, font8x16, Popup_Text_Color, Color_Bg_Window, npos, 252, name); - DWIN_UpdateLCD(); - break; - } - } + Popup_Window_Resume(); + update_selection(true); - // if hasn't resumable G-code file - if (!recovery_flag) return; + // TODO: Get the name of the current file from someplace + // + //(void)recovery.interrupted_file_exists(); + char * const name = card.longest_filename(); + const int8_t npos = _MAX(0U, DWIN_WIDTH - strlen(name) * (MENU_CHR_W)) / 2; + DWIN_Draw_String(false, true, font8x16, Popup_Text_Color, Color_Bg_Window, npos, 252, name); + DWIN_UpdateLCD(); while (recovery_flag) { ENCODER_DiffState encoder_diffState = Encoder_ReceiveAnalyze(); @@ -3644,12 +3628,12 @@ void EachMomentUpdate() { if (encoder_diffState == ENCODER_DIFF_ENTER) { recovery_flag = false; if (HMI_flag.select_flag) break; - TERN_(POWER_LOSS_RECOVERY, recovery.cancel()); + TERN_(POWER_LOSS_RECOVERY, queue.inject_P(PSTR("M1000C"))); HMI_StartFrame(true); return; } else - update_selection(encoder_diffState == ENCODER_DIFF_CCW); + update_selection(encoder_diffState == ENCODER_DIFF_CW); DWIN_UpdateLCD(); } @@ -3657,9 +3641,9 @@ void EachMomentUpdate() { select_print.set(0); HMI_ValueStruct.show_mode = 0; - HMI_StartFrame(false); - recovery.resume(); - return; + queue.inject_P(PSTR("M1000")); + Goto_PrintProcess(); + Draw_Status_Area(true); } #endif DWIN_UpdateLCD(); diff --git a/Marlin/src/lcd/dwin/e3v2/dwin.h b/Marlin/src/lcd/dwin/e3v2/dwin.h index 1b2cb273e3f8..5bff2e9f7890 100644 --- a/Marlin/src/lcd/dwin/e3v2/dwin.h +++ b/Marlin/src/lcd/dwin/e3v2/dwin.h @@ -252,8 +252,11 @@ typedef struct { char show_mode = 0; // -1: Temperature control 0: Printing temperature } HMI_value_t; +#define DWIN_CHINESE 123 +#define DWIN_ENGLISH 0 + typedef struct { - bool language_chinese; // 0: EN, 1: CN + uint8_t language; bool pause_flag:1; bool pause_action:1; bool print_finish:1; @@ -271,10 +274,10 @@ typedef struct { AxisEnum feedspeed_axis; #endif AxisEnum acc_axis, jerk_axis, step_axis; -} HMI_Flag; +} HMI_Flag_t; extern HMI_value_t HMI_ValueStruct; -extern HMI_Flag HMI_flag; +extern HMI_Flag_t HMI_flag; // Show ICO void ICON_Print(bool show); diff --git a/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp b/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp index 4a8095b6e993..a7f9a7a0c3e3 100644 --- a/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp +++ b/Marlin/src/lcd/extui/anycubic_chiron_lcd.cpp @@ -21,7 +21,7 @@ */ /** - * anycubic_chiron_lcd.cpp + * lcd/extui/anycubic_chiron_lcd.cpp * * Anycubic Chiron TFT support for Marlin */ @@ -31,508 +31,90 @@ #if ENABLED(ANYCUBIC_LCD_CHIRON) #include "ui_api.h" +#include "lib/anycubic_chiron/chiron_tft.h" -#if ENABLED(AUTO_BED_LEVELING_BILINEAR) - #if GRID_MAX_POINTS_X != 5 || GRID_MAX_POINTS_Y != 5 - #error ANYCUBIC CHIRON LCD requires a 5x5 bed leveling grid (GRID_MAX_POINTS_X and GRID_MAX_POINTS_Y) - #endif -#else - #error ANYCUBIC CHIRON LCD requires AUTO_BED_LEVELING_BILINEAR enabled -#endif - -#if DISABLED(FILAMENT_RUNOUT_SENSOR) - #error ANYCUBIC CHIRON LCD requires FILAMENT_RUNOUT_SENSOR enabled -#endif - -#if ENABLED(POWER_LOSS_RECOVERY) - #error ANYCUBIC CHIRON LCD does not currently support POWER_LOSS_RECOVERY -#endif - -static bool is_auto_leveling = false; -static bool is_printing_from_sd = false; -static bool is_out_of_filament = false; - -static void sendNewLine(void) { - LCD_SERIAL.write('\r'); - LCD_SERIAL.write('\n'); -} - -static void send(const char *str) { - LCD_SERIAL.print(str); -} - -static void sendLine(const char *str) { - send(str); - sendNewLine(); -} - -static void send_P(PGM_P str) { - while (const char c = pgm_read_byte(str++)) - LCD_SERIAL.write(c); -} - -static void sendLine_P(PGM_P str) { - send_P(str); - sendNewLine(); -} - -static void sendValue_P(PGM_P prefix, int value) { - send_P(prefix); - LCD_SERIAL.print(value); -} - -static void sendValue_P(PGM_P prefix, float value) { - send_P(prefix); - LCD_SERIAL.print(value); -} - -static void sendValueLine_P(PGM_P prefix, int value) { - send_P(prefix); - LCD_SERIAL.print(value); - sendNewLine(); -} - -static void sendValueLine_P(PGM_P prefix, float value) { - send_P(prefix); - LCD_SERIAL.print(value); - sendNewLine(); -} - -static int parseIntArgument(const char *buffer, char letterId) { - char *p = strchr(buffer, letterId); - if (!p) - return -1; - return atoi(p+1); -} - -static float parseFloatArgument(const char *buffer, char letterId) { - char *p = strchr(buffer, letterId); - if (!p) - return NAN; - return strtof(p+1, nullptr); -} - -static int mmToHundredths(float x) { - // Round - if (x >= 0) - x += 0.005f; - else - x -= 0.005f; - return (int)(x * 100.0f); -} - -static float hundredthsToMm(int x) { - return x / 100.0f; -} - -#define SEND_PGM(str) send_P(PSTR(str)) -#define SENDLINE_PGM(str) sendLine_P(PSTR(str)) -#define SENDVALUE_PGM(prefix, value) sendValue_P(PSTR(prefix), value) -#define SENDVALUELINE_PGM(prefix, value) sendValueLine_P(PSTR(prefix), value) +using namespace Anycubic; namespace ExtUI { - static void moveAxis(float delta, feedRate_t feedrate, axis_t axis) { - float pos = getAxisPosition_mm(axis); - pos += delta; - setAxisPosition_mm(pos, axis, feedrate); - } - - static void handleCmd(const char *rx) { - static FileList fileList; - static char selectedFileShortName[8+1+3+1]; + void onStartup() { Chiron.Startup(); } - if (rx[0] != 'A') { - SERIAL_ECHOPGM("Unexpected RX: "); - SERIAL_ECHOLN(rx); + void onIdle() { Chiron.IdleLoop(); } - return; - } - - const int cmd = atoi(&rx[1]); - - // Uncomment for debugging RX - //if (cmd > 7 && cmd != 20) { - // SERIAL_ECHOPGM("RX: "); - // SERIAL_ECHOLN(rx); - //} - - switch (cmd) { - case 0: // Get Hotend Actual Temperature - SENDVALUELINE_PGM("A0V ", (int)getActualTemp_celsius(E0)); - break; - case 1: // Get Hotend Target Temperature - SENDVALUELINE_PGM("A1V ", (int)getTargetTemp_celsius(E0)); - break; - case 2: // Get Bed Actual Temperature - SENDVALUELINE_PGM("A2V ", (int)getActualTemp_celsius(BED)); - break; - case 3: // Get Bed Target Temperature - SENDVALUELINE_PGM("A3V ", (int)getTargetTemp_celsius(BED)); - break; - case 4: // Get Fan Speed - SENDVALUELINE_PGM("A4V ", (int)getTargetFan_percent(FAN0)); - break; - case 5: // Get Current Coordinates - SENDVALUE_PGM("A5V X: ", getAxisPosition_mm(X)); - SENDVALUE_PGM(" Y: ", getAxisPosition_mm(Y)); - SENDVALUE_PGM(" Z: ", getAxisPosition_mm(Z)); - sendNewLine(); - break; - case 6: // Get SD Card Print Status - if (isPrintingFromMedia()) - SENDVALUELINE_PGM("A6V ", (int)getProgress_percent()); - else - SENDLINE_PGM("A6V ---"); - break; - case 7: // Get Printing Time - if (isPrinting()) { - const int totalMinutes = getProgress_seconds_elapsed() / 60; - SENDVALUE_PGM("A7V ", (int)(totalMinutes/60)); - SENDVALUE_PGM(" H ", (int)(totalMinutes%60)); - SENDLINE_PGM(" M"); - } else { - SENDLINE_PGM("A7V 999:999"); - } - break; - case 8: // Get SD Card File List - if (isMediaInserted()) { - const int startIndex = parseIntArgument(rx, 'S'); - SENDLINE_PGM("FN "); - for (int i = 0, fileIndex = 0, numFiles = 0; i < (int)fileList.count() && numFiles < 4; i++) { - fileList.seek(i); - if (!fileList.isDir()) { - if (fileIndex >= startIndex) { - sendLine(fileList.shortFilename()); - sendLine(fileList.longFilename()); - numFiles++; - } - fileIndex++; - } - } - SENDLINE_PGM("END"); - } else { - SENDLINE_PGM("J02"); - } - break; - case 9: // Pause SD Card Print - if (isPrintingFromMedia()) { - pausePrint(); - is_printing_from_sd = false; - SENDLINE_PGM("J05"); - } else { - SENDLINE_PGM("J16"); // Print stopped - } - break; - case 10: // Resume SD Card Print - if (is_out_of_filament) { - is_out_of_filament = false; - // Filament change did eject the old filament automatically, - // now continue and load the new one - setUserConfirmed(); - SENDLINE_PGM("J04"); // Printing from SD card - } else if (isPrintingFromMediaPaused()) { - resumePrint(); - SENDLINE_PGM("J04"); // Printing from SD card - } - break; - case 11: // Stop SD Card Print - if (isPrintingFromMedia()) { - stopPrint(); - is_printing_from_sd = false; - SENDLINE_PGM("J16"); // Print stopped - } - break; - //case 12: // Kill - // break; - case 13: // Select File - if (!isPrinting()) { - // Store selected file name - char *p = strchr(rx, ' '); - if (p != nullptr && strlen(p+1) < sizeof(selectedFileShortName)) { - strcpy(selectedFileShortName, p+1); - SENDLINE_PGM("J20"); // Open succeeded - } - else - SENDLINE_PGM("J21"); // Open failed - } - break; - case 14: // Start Print - if (!isPrinting() && strcmp(selectedFileShortName, "") != 0) { - printFile(selectedFileShortName); - is_printing_from_sd = true; - SENDLINE_PGM("J04"); // Printing from SD card - } - break; - case 15: // Resume from power outage - // This is not supported, just report print as completed - SENDLINE_PGM("J16"); // Print stopped - break; - case 16: // Set Hotend Target Temperature - { - int temp = parseIntArgument(rx, 'S'); - if (temp >= 0) - setTargetTemp_celsius(temp, E0); - } - break; - case 17: // Set Bed Target Temperature - { - int temp = parseIntArgument(rx, 'S'); - if (temp >= 0) - setTargetTemp_celsius(temp, BED); - } - break; - case 18: // Set Fan Speed - { - int temp = parseIntArgument(rx, 'S'); - if (temp >= 0) - setTargetFan_percent(temp, FAN0); - } - break; - case 19: // Disable Motors - injectCommands_P(PSTR("M84")); - break; - case 20: // Get/Set Printing Speed - { - int newPerc = parseIntArgument(rx, 'S'); - if (newPerc >= 0) - setFeedrate_percent(newPerc); - else - SENDVALUELINE_PGM("A20V ", (int)getFeedrate_percent()); - } - break; - case 21: // Home axes - if (!isPrinting()) { - const bool hasX = strchr(rx, 'X') != nullptr, - hasY = strchr(rx, 'Y') != nullptr, - hasZ = strchr(rx, 'Z') != nullptr, - hasC = strchr(rx, 'C') != nullptr; - if (hasX || hasY || hasZ) { - if (hasX) injectCommands_P(PSTR("G28 X")); - if (hasY) injectCommands_P(PSTR("G28 Y")); - if (hasZ) injectCommands_P(PSTR("G28 Z")); - } else if (hasC) { - injectCommands_P(PSTR("G28")); - } - } - break; - case 22: // Move axes - if (!isPrinting()) { - const int feedrate = parseIntArgument(rx, 'F') / 60; - float delta; - if (!isnan(delta = parseFloatArgument(rx, 'X'))) - moveAxis(delta, feedrate, X); - else if (!isnan(delta = parseFloatArgument(rx, 'Y'))) - moveAxis(delta, feedrate, Y); - else if (!isnan(delta = parseFloatArgument(rx, 'Z'))) - moveAxis(delta, feedrate, Z); - } - break; - case 23: // Preheat PLA - setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, E0); - setTargetTemp_celsius(PREHEAT_1_TEMP_BED, BED); - SENDLINE_PGM("OK"); - break; - case 24: // Preheat ABS - setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, E0); - setTargetTemp_celsius(PREHEAT_2_TEMP_BED, BED); - SENDLINE_PGM("OK"); - break; - case 25: // Cool down - setTargetTemp_celsius(0, E0); - setTargetTemp_celsius(0, BED); - SENDLINE_PGM("J12"); - break; - case 26: // Refresh SD Card - fileList.refresh(); - break; - //case 27: // Adjust Servo Angles - // break; - //case 28: // Filament Test - // break; - case 29: // Get Bed Autolevel Grid - { - int x = parseIntArgument(rx, 'X'), - y = parseIntArgument(rx, 'Y'); - if (x != -1 && y != -1) { - xy_uint8_t coord; - coord.set(x, y); - const int value = mmToHundredths(getMeshPoint(coord)); - SENDVALUELINE_PGM("A29V ", value); - } - } - break; - case 30: // Autolevel - if (strchr(rx, 'S')) { // Autoleveling started by clicking "PROBE" and then "OK" - // Note: - // We check for completion by monitoring the command queue. - // Since it will become empty *while* processing the last injected command, - // we enqueue an extra 10ms delay so we can the determine when all the others - // have completed. - if (isMachineHomed()) - injectCommands_P(PSTR("G29\nG4 P10")); - else - injectCommands_P(PSTR("G28\nG29\nG4 P10")); - is_auto_leveling = true; - } else { // Entering Autoleveling screen - if (isPrinting()) - SENDLINE_PGM("J24"); // Disallow autoleveling - else - SENDLINE_PGM("J26"); // Allow autoleveling - } - break; - case 31: // Set Bed Autolevel Z offset - if (strchr(rx, 'G')) { // Get - SENDVALUELINE_PGM("A31V ", getZOffset_mm()); - } else if (strchr(rx, 'S')) { // Set - float delta = parseFloatArgument(rx, 'S'); - delta = constrain(delta, -1.0, 1.0); - setZOffset_mm(getZOffset_mm() + delta); - - SENDVALUELINE_PGM("A31V ", getZOffset_mm()); - } else if (strchr(rx, 'D')) { // Save - injectCommands_P(PSTR("M500")); - } - break; - //case 32: // ? - // break; - case 33: // Get Version Info - SENDLINE_PGM("J33 " SHORT_BUILD_VERSION); - break; - case 34: // Set Bed Autolevel Grid - { - int x = parseIntArgument(rx, 'X'), - y = parseIntArgument(rx, 'Y'), - v = parseIntArgument(rx, 'V'); - if (x != -1 && y != -1 && v != -1) { // Set new value - float value = hundredthsToMm(v); - value = constrain(value, -10, 10); - - xy_uint8_t coord; - coord.set(x, y); - setMeshPoint(coord, value); - } else if (strchr(rx, 'S')) { // Save (apply new values) - injectCommands_P(PSTR("M500")); - } else if (strchr(rx, 'C')) { // Cancel (discard new values) - injectCommands_P(PSTR("M501")); - } - } - break; - } + void onPrinterKilled(PGM_P const error, PGM_P const component) { + Chiron.PrinterKilled(error,component); } - #define RX_LEN_MAX 63 - static void parseSerialRx() { - static char rxBuffer[RX_LEN_MAX+1]; - static uint8_t rxLen = 0; + void onMediaInserted() { Chiron.MediaEvent(AC_media_inserted); } + void onMediaError() { Chiron.MediaEvent(AC_media_error); } + void onMediaRemoved() { Chiron.MediaEvent(AC_media_removed); } - while (LCD_SERIAL.available()) { - const char c = LCD_SERIAL.read(); - switch (c) { - case '\r': case '\n': - if (rxLen > 0 && rxLen <= RX_LEN_MAX) { - rxBuffer[rxLen] = '\0'; // Terminate string - handleCmd(rxBuffer); - } - rxLen = 0; - break; - default: - if (rxLen < RX_LEN_MAX) - rxBuffer[rxLen++] = c; - else { - rxLen = 0xFF; // Overrun - SERIAL_ECHOPGM("Warning: dropping long received line"); - } - break; - } - } - } - - static void detectPrintFromSdCompletion() { - // Note: printFile() queues some commands that actually start the print, so isPrintingFromMedia() - // initially returns false - if (is_printing_from_sd && !commandsInQueue() && !isPrintingFromMedia()) { - is_printing_from_sd = false; - SENDLINE_PGM("J14"); // Print done - } - } - - static void detectAutolevelingCompletion() { - if (is_auto_leveling && !commandsInQueue()) { - is_auto_leveling = false; - injectCommands_P(PSTR("M500")); - SENDLINE_PGM("J25"); // Autoleveling done - } - } - - void onStartup() { - #ifndef LCD_BAUDRATE - #define LCD_BAUDRATE 115200 + void onPlayTone(const uint16_t frequency, const uint16_t duration) { + #if ENABLED(SPEAKER) + ::tone(BEEPER_PIN, frequency, duration); #endif - LCD_SERIAL.begin(LCD_BAUDRATE); - sendNewLine(); - SENDLINE_PGM("J17"); // Reset - delay_ms(10); - SENDLINE_PGM("J12"); // Ready } - void onIdle() { - parseSerialRx(); - detectAutolevelingCompletion(); - detectPrintFromSdCompletion(); - } + void onPrintTimerStarted() { Chiron.TimerEvent(AC_timer_started); } + void onPrintTimerPaused() { Chiron.TimerEvent(AC_timer_paused); } + void onPrintTimerStopped() { Chiron.TimerEvent(AC_timer_stopped); } + void onFilamentRunout(const extruder_t) { Chiron.FilamentRunout(); } + void onUserConfirmRequired(const char * const msg) { Chiron.ConfirmationRequest(msg); } + void onStatusChanged(const char * const msg) { Chiron.StatusChange(msg); } + + void onFactoryReset() {} - void onPrinterKilled(PGM_P const error, PGM_P const component) { } + void onStoreSettings(char *buff) { + // Called when saving to EEPROM (i.e. M500). If the ExtUI needs + // permanent data to be stored, it can write up to eeprom_data_size bytes + // into buff. - void onMediaInserted() { - SENDLINE_PGM("J00"); // SD Inserted + // Example: + // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // memcpy(buff, &myDataStruct, sizeof(myDataStruct)); } - void onMediaError() { } + void onLoadSettings(const char *buff) { + // Called while loading settings from EEPROM. If the ExtUI + // needs to retrieve data, it should copy up to eeprom_data_size bytes + // from buff - void onMediaRemoved() { - SENDLINE_PGM("J01"); // SD Removed + // Example: + // static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size); + // memcpy(&myDataStruct, buff, sizeof(myDataStruct)); } - void onPlayTone(const uint16_t frequency, const uint16_t duration) { - tone(BEEPER_PIN, frequency, duration); + void onConfigurationStoreWritten(bool success) { + // Called after the entire EEPROM has been written, + // whether successful or not. } - void onPrintTimerStarted() { } - - void onPrintTimerPaused() { } - - void onPrintTimerStopped() { } - - void onFilamentRunout(const extruder_t extruder) { - is_out_of_filament = true; - SENDLINE_PGM("J23"); // Filament runout - SENDLINE_PGM("J18"); // Print paused - // Note: printer will unload filament automatically + void onConfigurationStoreRead(bool success) { + // Called after the entire EEPROM has been read, + // whether successful or not. } - void onUserConfirmRequired(const char * const msg) { } - - void onStatusChanged(const char * const msg) { } - - void onFactoryReset() { } - - void onStoreSettings(char *buff) { } - - void onLoadSettings(const char *buff) { } - - void onConfigurationStoreWritten(bool success) { } - - void onConfigurationStoreRead(bool success) { } + #if HAS_MESH + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { + // Called when any mesh points are updated + //SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " z:", zval); + } - void onMeshUpdate(const int8_t xpos, const int8_t ypos, const float zval) { } + void onMeshUpdate(const int8_t xpos, const int8_t ypos, const ExtUI::probe_state_t state) { + // Called to indicate a special condition + //SERIAL_ECHOLNPAIR("onMeshUpdate() x:", xpos, " y:", ypos, " state:", state); + } + #endif #if ENABLED(POWER_LOSS_RECOVERY) - void onPowerLossResume() { } + // Called on resume from power-loss + void onPowerLossResume() { Chiron.PowerLossRecovery(); } #endif #if HAS_PID_HEATING - void onPidTuning(const result_t rst) { } + void onPidTuning(const result_t rst) { + // Called for temperature PID tuning result + } #endif } diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp b/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp new file mode 100644 index 000000000000..fb4c84abb485 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.cpp @@ -0,0 +1,162 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * lcd/extui/lib/FileNavigator.cpp + * + * Extensible_UI implementation for Anycubic Chiron + * Written By Nick Wells, 2020 [https://github.com/SwiftNick] + * (not affiliated with Anycubic, Ltd.) + */ + +/*************************************************************************** + * The AC panel wants files in block of 4 and can only display a flat list * + * This library allows full folder traversal. * + ***************************************************************************/ + +#include "../../../../inc/MarlinConfigPre.h" + +#if ENABLED(ANYCUBIC_LCD_CHIRON) + +#include "FileNavigator.h" +#include "chiron_tft.h" + +using namespace ExtUI; + +namespace Anycubic { + + FileList FileNavigator::filelist; // Instance of the Marlin file API + char FileNavigator::currentfoldername[MAX_PATH_LEN]; // Current folder path + uint16_t FileNavigator::lastindex; + uint8_t FileNavigator::folderdepth; + uint16_t FileNavigator::currentindex; // override the panel request + + FileNavigator::FileNavigator() { reset(); } + + void FileNavigator::reset() { + currentfoldername[0] = '\0'; + folderdepth = 0; + currentindex = 0; + lastindex = 0; + // Start at root folder + while (!filelist.isAtRootDir()) filelist.upDir(); + refresh(); + } + + void FileNavigator::refresh() { filelist.refresh(); } + + void FileNavigator::getFiles(uint16_t index) { + uint8_t files = 4; + if (index == 0) currentindex = 0; + + // Each time we change folder we reset the file index to 0 and keep track + // of the current position as the TFT panel isnt aware of folders trees. + if (index > 0) { + --currentindex; // go back a file to take account off the .. we added to the root. + if (index > lastindex) + currentindex += files; + else + currentindex = currentindex < 4 ? 0 : currentindex - files; + } + lastindex = index; + + #if ACDEBUG(AC_FILE) + SERIAL_ECHOLNPAIR("index=", index, " currentindex=", currentindex); + #endif + + if (currentindex == 0 && folderdepth > 0) { // Add a link to go up a folder + TFTSer.println("<<"); + TFTSer.println(".."); + files--; + } + + for (uint16_t seek = currentindex; seek < currentindex + files; seek++) { + if (filelist.seek(seek)) { + sendFile(); + #if ACDEBUG(AC_FILE) + SERIAL_ECHOLNPAIR("-", seek, " '", filelist.longFilename(), "' '", currentfoldername, "", filelist.shortFilename(), "'\n"); + #endif + } + } + } + + void FileNavigator::sendFile() { + // send the file and folder info to the panel + // this info will be returned when the file is selected + // Permitted special characters in file name -_*#~ + // Panel can display 22 characters per line + if (filelist.isDir()) { + //TFTSer.print(currentfoldername); + TFTSer.println(filelist.shortFilename()); + TFTSer.print(filelist.shortFilename()); + TFTSer.println("/"); + } + else { + // Logical Name + TFTSer.print("/"); + if (folderdepth > 0) TFTSer.print(currentfoldername); + + TFTSer.println(filelist.shortFilename()); + + // Display Name + TFTSer.println(filelist.longFilename()); + } + } + void FileNavigator::changeDIR(char *folder) { + #if ACDEBUG(AC_FILE) + SERIAL_ECHOLNPAIR("currentfolder: ", currentfoldername, " New: ", folder); + #endif + if (folderdepth >= MAX_FOLDER_DEPTH) return; // limit the folder depth + strcat(currentfoldername, folder); + strcat(currentfoldername, "/"); + filelist.changeDir(folder); + refresh(); + folderdepth++; + currentindex = 0; + } + + void FileNavigator::upDIR() { + filelist.upDir(); + refresh(); + folderdepth--; + currentindex = 0; + // Remove the last child folder from the stored path + if (folderdepth == 0) { + currentfoldername[0] = '\0'; + reset(); + } + else { + char *pos = nullptr; + for (uint8_t f = 0; f < folderdepth; f++) + pos = strchr(currentfoldername, '/'); + + *(pos + 1) = '\0'; + } + #if ACDEBUG(AC_FILE) + SERIAL_ECHOLNPAIR("depth: ", folderdepth, " currentfoldername: ", currentfoldername); + #endif + } + + char* FileNavigator::getCurrentFolderName() { return currentfoldername; } +} + +#endif // ANYCUBIC_LCD_CHIRON diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.h b/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.h new file mode 100644 index 000000000000..8e03614a4649 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/FileNavigator.h @@ -0,0 +1,56 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * lcd/extui/lib/FileNavigator.h + * + * Extensible_UI implementation for Anycubic Chiron + * Written By Nick Wells, 2020 [https://github.com/SwiftNick] + * (not affiliated with Anycubic, Ltd.) + */ + +#include "chiron_tft_defs.h" +#include "../../ui_api.h" + +using namespace ExtUI; + +namespace Anycubic { + class FileNavigator { + public: + FileNavigator(); + void reset(); + void getFiles(uint16_t); + void upDIR(); + void changeDIR(char *); + void sendFile(); + void refresh(); + char * getCurrentFolderName(); + private: + static FileList filelist; + static char currentfoldername[MAX_PATH_LEN]; + static uint16_t lastindex; + static uint8_t folderdepth; + static uint16_t currentindex; + }; + extern FileNavigator filenavigator; +} diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/Tunes.cpp b/Marlin/src/lcd/extui/lib/anycubic_chiron/Tunes.cpp new file mode 100644 index 000000000000..f09c4db3f283 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/Tunes.cpp @@ -0,0 +1,62 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * lcd/extui/lib/Tunes.cpp + * + * Extensible_UI implementation for Anycubic Chiron + * Written By Nick Wells, 2020 [https://github.com/SwiftNick] + * (not affiliated with Anycubic, Ltd.) + */ + +/*********************************************************************** + * A Utility to play tunes using the buzzer in the printer controller. * + * See Tunes.h for note and tune definitions. * + ***********************************************************************/ + +#include "../../../../inc/MarlinConfigPre.h" + +#if ENABLED(ANYCUBIC_LCD_CHIRON) + +#include "Tunes.h" +#include "../../ui_api.h" + +namespace Anycubic { + + void PlayTune(uint8_t beeperPin, const uint16_t *tune, uint8_t speed=1) { + uint8_t pos = 1; + uint16_t wholenotelen = tune[0] / speed; + do { + uint16_t freq = tune[pos]; + uint16_t notelen = wholenotelen / tune[pos + 1]; + + ::tone(beeperPin, freq, notelen); + ExtUI::delay_ms(notelen); + pos += 2; + + if (pos >= MAX_TUNE_LENGTH) break; + } while (tune[pos] != n_END); + } + +} + +#endif // ANYCUBIC_LCD_CHIRON diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/Tunes.h b/Marlin/src/lcd/extui/lib/anycubic_chiron/Tunes.h new file mode 100644 index 000000000000..1bafec43adf3 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/Tunes.h @@ -0,0 +1,224 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * lcd/extui/lib/Tunes.h + * + * Extensible_UI implementation for Anycubic Chiron + * Written By Nick Wells, 2020 [https://github.com/SwiftNick] + * (not affiliated with Anycubic, Ltd.) + */ + +/************************************************************************** + * Notes definition from https://pages.mtu.edu/~suits/NoteFreqCalcs.html * + * * + * The format of a tune is: * + * {,,, ,, ... } * + * * + * 1) The first value is the length of a whole note in milliseconds * + * 2) Then a sequence of pitch and duration pairs * + * 3) Finally the END marker so your tunes can be any length up to * + * MAX_TUNE_LEN * + *************************************************************************/ + +#include + +#define MAX_TUNE_LENGTH 128 + +// Special notes! +#define n_P 0 // silence or pause +#define n_END 10000 // end of tune marker + +// Note duration divisors +#define l_T1 1 +#define l_T2 2 +#define l_T3 3 +#define l_T4 4 +#define l_T8 8 +#define l_T16 16 + +// Note Frequency +#define n_C0 16 +#define n_CS0 17 +#define n_D0 18 +#define n_DS0 19 +#define n_E0 21 +#define n_F0 22 +#define n_FS0 23 +#define n_G0 25 +#define n_GS0 26 +#define n_A0 28 +#define n_AS0 29 +#define n_B0 31 +#define n_C1 33 +#define n_CS1 35 +#define n_D1 37 +#define n_DS1 39 +#define n_E1 41 +#define n_F1 44 +#define n_FS1 46 +#define n_G1 49 +#define n_GS1 52 +#define n_A1 55 +#define n_AS1 58 +#define n_B1 62 +#define n_C2 65 +#define n_CS2 69 +#define n_D2 73 +#define n_DS2 78 +#define n_E2 82 +#define n_F2 87 +#define n_FS2 93 +#define n_G2 98 +#define n_GS2 104 +#define n_A2 110 +#define n_AS2 117 +#define n_B2 123 +#define n_C3 131 +#define n_CS3 139 +#define n_D3 147 +#define n_DS3 156 +#define n_E3 165 +#define n_F3 175 +#define n_FS3 185 +#define n_G3 196 +#define n_GS3 208 +#define n_A3 220 +#define n_AS3 233 +#define n_B3 247 +#define n_C4 262 +#define n_CS4 277 +#define n_D4 294 +#define n_DS4 311 +#define n_E4 330 +#define n_F4 349 +#define n_FS4 370 +#define n_G4 392 +#define n_GS4 415 +#define n_A4 440 +#define n_AS4 466 +#define n_B4 494 +#define n_C5 523 +#define n_CS5 554 +#define n_D5 587 +#define n_DS5 622 +#define n_E5 659 +#define n_F5 698 +#define n_FS5 740 +#define n_G5 784 +#define n_GS5 831 +#define n_A5 880 +#define n_AS5 932 +#define n_B5 988 +#define n_C6 1047 +#define n_CS6 1109 +#define n_D6 1175 +#define n_DS6 1245 +#define n_E6 1319 +#define n_F6 1397 +#define n_FS6 1480 +#define n_G6 1568 +#define n_GS6 1661 +#define n_A6 1760 +#define n_AS6 1865 +#define n_B6 1976 +#define n_C7 2093 +#define n_CS7 2217 +#define n_D7 2349 +#define n_DS7 2489 +#define n_E7 2637 +#define n_F7 2794 +#define n_FS7 2960 +#define n_G7 3136 +#define n_GS7 3322 +#define n_A7 3520 +#define n_AS7 3729 +#define n_B7 3951 +#define n_C8 4186 +#define n_CS8 4435 +#define n_D8 4699 +#define n_DS8 4978 +#define n_E8 5274 +#define n_F8 5587 +#define n_FS8 5920 +#define n_G8 6272 +#define n_GS8 6645 +#define n_A8 7040 +#define n_AS8 7459 +#define n_B8 7902 + +namespace Anycubic { + + void PlayTune(uint8_t beeperPin, const uint16_t *tune, uint8_t speed); + + // Only uncomment the tunes you are using to save memory + // This will help you write tunes! + // https://www.apronus.com/music/flashpiano.htm + + const uint16_t SOS[] = { + 250, + n_G6,l_T3, n_P,l_T3, n_G6,l_T3, n_P,l_T3, n_G6,l_T3, n_P,l_T1, + n_G6,l_T1, n_P,l_T3, n_G6,l_T1, n_P,l_T3, n_G6,l_T1, n_P,l_T1, + n_G6,l_T3, n_P,l_T3, n_G6,l_T3, n_P,l_T3, n_G6,l_T3, n_P,l_T1, + n_END + }; + + const uint16_t BeepBeep[] = { + 500, + n_C7,l_T8, n_P,l_T16, n_C7,l_T8, n_P,l_T8, + n_END + }; + + const uint16_t BeepBeepBeeep[] = { + 1000, + n_G7,l_T4, n_P,l_T16, n_G7,l_T4, n_P,l_T8, n_G7,l_T2, + n_END + }; + + const uint16_t Anycubic_PowerOn[] = { + 1000, + n_F7,l_T8, n_P,l_T8, n_C7,l_T8, n_P,l_T8, n_D7,l_T8, n_P,l_T8, + n_E7,l_T8, n_P,l_T8, n_D7,l_T4, n_P,l_T4, n_G7,l_T4, n_P,l_T4, + n_A7,l_T2, n_P,l_T1, + n_END + }; + + const uint16_t GB_PowerOn[] = { + 500, + n_C6,l_T4, n_P,l_T16, n_C7,l_T2, n_P,l_T8, + n_END + }; + + const uint16_t Heater_Timedout[] = { + 1000, + n_C6,l_T1, + n_END + }; + + const uint16_t FilamentOut[] = { + 1000, + n_AS7,l_T4, n_P,l_T16, n_FS7,l_T2, + n_END + }; + +} diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp new file mode 100644 index 000000000000..5e492573e70a --- /dev/null +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.cpp @@ -0,0 +1,896 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * lcd/extui/lib/chiron_tft.cpp + * + * Extensible_UI implementation for Anycubic Chiron + * Written By Nick Wells, 2020 [https://github.com/SwiftNick] + * (not affiliated with Anycubic, Ltd.) + */ + +#include "../../../../inc/MarlinConfigPre.h" + +#if ENABLED(ANYCUBIC_LCD_CHIRON) + +#include "chiron_tft.h" +#include "Tunes.h" +#include "FileNavigator.h" + +#include "../../../../gcode/queue.h" +#include "../../../../sd/cardreader.h" +#include "../../../../libs/numtostr.h" +#include "../../../../MarlinCore.h" +namespace Anycubic { + + printer_state_t ChironTFT::printer_state; + paused_state_t ChironTFT::pause_state; + heater_state_t ChironTFT::hotend_state; + heater_state_t ChironTFT::hotbed_state; + xy_uint8_t ChironTFT::selectedmeshpoint; + char ChironTFT::selectedfile[MAX_PATH_LEN]; + char ChironTFT::panel_command[MAX_CMND_LEN]; + uint8_t ChironTFT::command_len; + float ChironTFT::live_Zoffset; + file_menu_t ChironTFT::file_menu; + + ChironTFT::ChironTFT(){} + + void ChironTFT::Startup() { + selectedfile[0] = '\0'; + panel_command[0] = '\0'; + command_len = 0; + printer_state = AC_printer_idle; + pause_state = AC_paused_idle; + hotend_state = AC_heater_off; + hotbed_state = AC_heater_off; + live_Zoffset = 0.0; + file_menu = AC_menu_file; + + // Setup pins for powerloss detection + // Two IO pins are connected on the Trigorilla Board + // On a power interruption the OUTAGECON_PIN goes low. + + #if ENABLED(POWER_LOSS_RECOVERY) + OUT_WRITE(OUTAGECON_PIN, HIGH); + #endif + + // Filament runout is handled by Marlin settings in Configuration.h + // set FIL_RUNOUT_STATE HIGH // Pin state indicating that filament is NOT present. + // enable FIL_RUNOUT_PULLUP + + TFTSer.begin(115200); + + // Signal Board has reset + SendtoTFTLN(AC_msg_main_board_has_reset); + + safe_delay(200); + + // Enable levelling and Disable end stops during print + // as Z home places nozzle above the bed so we need to allow it past the end stops + injectCommands_P(AC_cmnd_enable_levelling); //M211 S0\n")); + + // Startup tunes are defined in Tunes.h + //PlayTune(BEEPER_PIN, Anycubic_PowerOn, 1); + PlayTune(BEEPER_PIN, GB_PowerOn, 1); + #if ACDEBUGLEVEL + SERIAL_ECHOLNPAIR("AC Debug Level ", ACDEBUGLEVEL); + #endif + SendtoTFTLN(AC_msg_ready); + } + + void ChironTFT::IdleLoop() { + if (ReadTFTCommand()) { + ProcessPanelRequest(); + command_len = 0; + } + CheckHeaters(); + } + + void ChironTFT::PrinterKilled(PGM_P error,PGM_P component) { + SendtoTFTLN(AC_msg_kill_lcd); + #if ACDEBUG(AC_MARLIN) + SERIAL_ECHOLNPAIR("PrinterKilled()\nerror: ", error , "\ncomponent: ", component); + #endif + } + + void ChironTFT::MediaEvent(media_event_t event) { + #if ACDEBUG(AC_MARLIN) + SERIAL_ECHOLNPAIR("ProcessMediaStatus() ", event); + #endif + switch (event) { + case AC_media_inserted: + SendtoTFTLN(AC_msg_sd_card_inserted); + break; + + case AC_media_removed: + SendtoTFTLN(AC_msg_sd_card_removed); + break; + + case AC_media_error: + SendtoTFTLN(AC_msg_no_sd_card); + break; + } + } + + void ChironTFT::TimerEvent(timer_event_t event) { + #if ACDEBUG(AC_MARLIN) + SERIAL_ECHOLNPAIR("TimerEvent() ", event); + SERIAL_ECHOLNPAIR("Printer State: ", printer_state); + #endif + + switch (event) { + case AC_timer_started: { + live_Zoffset = 0.0; // reset print offset + setSoftEndstopState(false); // disable endstops to print + printer_state = AC_printer_printing; + SendtoTFTLN(AC_msg_print_from_sd_card); + } break; + + case AC_timer_paused: { + printer_state = AC_printer_paused; + pause_state = AC_paused_idle; + SendtoTFTLN(AC_msg_paused); + } break; + + case AC_timer_stopped: { + if (printer_state != AC_printer_idle) { + printer_state = AC_printer_stopping; + SendtoTFTLN(AC_msg_print_complete); + } + setSoftEndstopState(true); // enable endstops + } break; + } + } + + void ChironTFT::FilamentRunout() { + #if ACDEBUG(AC_MARLIN) + SERIAL_ECHOLNPAIR("FilamentRunout() printer_state ", printer_state); + #endif + // 1 Signal filament out + SendtoTFTLN(isPrintingFromMedia() ? AC_msg_filament_out_alert : AC_msg_filament_out_block); + //printer_state = AC_printer_filament_out; + PlayTune(BEEPER_PIN, FilamentOut, 1); + } + + void ChironTFT::ConfirmationRequest(const char * const msg) { + // M108 continue + #if ACDEBUG(AC_MARLIN) + SERIAL_ECHOLNPAIR("ConfirmationRequest() ", msg, " printer_state:", printer_state); + #endif + switch (printer_state) { + case AC_printer_pausing: { + if ( (strcmp_P(msg, MARLIN_msg_print_paused) == 0 ) || (strcmp_P(msg, MARLIN_msg_nozzle_parked) == 0 ) ) { + SendtoTFTLN(AC_msg_paused); // enable continue button + printer_state = AC_printer_paused; + } + } break; + + case AC_printer_resuming_from_power_outage: + case AC_printer_printing: + case AC_printer_paused: { + // Heater timout, send acknowledgement + if (strcmp_P(msg, MARLIN_msg_heater_timeout) == 0 ) { + pause_state = AC_paused_heater_timed_out; + SendtoTFTLN(AC_msg_paused); // enable continue button + PlayTune(BEEPER_PIN,Heater_Timedout,1); + } + // Reheat finished, send acknowledgement + else if (strcmp_P(msg, MARLIN_msg_reheat_done) == 0 ) { + pause_state = AC_paused_idle; + SendtoTFTLN(AC_msg_paused); // enable continue button + } + // Filament Purging, send acknowledgement enter run mode + else if (strcmp_P(msg, MARLIN_msg_filament_purging) == 0 ) { + pause_state = AC_paused_purging_filament; + SendtoTFTLN(AC_msg_paused); // enable continue button + } + } break; + default: + break; + } + } + + void ChironTFT::StatusChange(const char * const msg) { + #if ACDEBUG(AC_MARLIN) + SERIAL_ECHOLNPAIR("StatusChange() ", msg); + SERIAL_ECHOLNPAIR("printer_state:", printer_state); + #endif + bool msg_matched = false; + // The only way to get printer status is to parse messages + // Use the state to minimise the work we do here. + switch (printer_state) { + case AC_printer_probing: { + // If probing completes ok save the mesh and park + if (strcmp_P(msg, MARLIN_msg_ready) == 0 ) { + injectCommands_P(PSTR("M500\nG27")); + SendtoTFTLN(AC_msg_probing_complete); + printer_state = AC_printer_idle; + msg_matched = true; + } + // If probing fails dont save the mesh raise the probe above the bad point + if (strcmp_P(msg, MARLIN_msg_probing_failed) == 0 ) { + PlayTune(BEEPER_PIN, BeepBeepBeeep, 1); + injectCommands_P(PSTR("G1 Z50 F500")); + SendtoTFTLN(AC_msg_probing_complete); + printer_state = AC_printer_idle; + msg_matched = true; + } + } break; + + case AC_printer_printing: { + if (strcmp_P(msg, MARLIN_msg_reheating) == 0 ) { + SendtoTFTLN(AC_msg_paused); // enable continue button + msg_matched = true; + } + } break; + + case AC_printer_pausing: { + if (strcmp_P(msg, MARLIN_msg_print_paused) == 0 ) { + SendtoTFTLN(AC_msg_paused); + printer_state = AC_printer_paused; + pause_state = AC_paused_idle; + msg_matched = true; + } + } break; + + case AC_printer_stopping: { + if (strcmp_P(msg, MARLIN_msg_print_aborted) == 0 ) { + SendtoTFTLN(AC_msg_stop); + printer_state = AC_printer_idle; + msg_matched = true; + } + } break; + default: + break; + } + + // If not matched earlier see if this was a heater message + if (!msg_matched) { + if (strcmp_P(msg, MARLIN_msg_extruder_heating) == 0) { + SendtoTFTLN(AC_msg_nozzle_heating); + hotend_state = AC_heater_temp_set; + } + else if (strcmp_P(msg, MARLIN_msg_bed_heating) == 0) { + SendtoTFTLN(AC_msg_bed_heating); + hotbed_state = AC_heater_temp_set; + } + } + } + + void ChironTFT::PowerLossRecovery() { + printer_state = AC_printer_resuming_from_power_outage; // Play tune to notify user we can recover. + PlayTune(BEEPER_PIN, SOS, 1); + SERIAL_ECHOLNPGM("Resuming from power outage..."); + SERIAL_ECHOLNPGM("Select SD file then press resume"); + } + + void ChironTFT::SendtoTFT(PGM_P str) { // A helper to print PROGMEN string to the panel + #if ACDEBUG(AC_SOME) + serialprintPGM(str); + #endif + while (const char c = pgm_read_byte(str++)) TFTSer.print(c); + } + + void ChironTFT::SendtoTFTLN(PGM_P str = nullptr) { + if (str != nullptr) { + #if ACDEBUG(AC_SOME) + SERIAL_ECHO("> "); + #endif + SendtoTFT(str); + #if ACDEBUG(AC_SOME) + SERIAL_EOL(); + #endif + } + TFTSer.println(""); + } + + bool ChironTFT::ReadTFTCommand() { + bool command_ready = false; + while( (TFTSer.available() > 0) && (command_len < MAX_CMND_LEN) ) { + panel_command[command_len] = TFTSer.read(); + if(panel_command[command_len] == '\n') { + command_ready = true; + break; + } + command_len++; + } + + if(command_ready) { + panel_command[command_len] = 0x00; + #if ACDEBUG(AC_ALL) + SERIAL_ECHOLNPAIR("< ", panel_command); + #endif + #if ACDEBUG(AC_SOME) + // Ignore status request commands + uint8_t req = atoi(&panel_command[1]); + if (req > 7 && req != 20) { + SERIAL_ECHOLNPAIR("> ", panel_command); + SERIAL_ECHOLNPAIR("printer_state:", printer_state); + } + #endif + } + return command_ready; + } + + int8_t ChironTFT::Findcmndpos(const char * buff, char q) { + bool found = false; + int8_t pos = 0; + do { + if (buff[pos] == q) { + found = true; + break; + } + pos ++; + } while(pos < MAX_CMND_LEN); + if (found) return pos; + return -1; + } + + void ChironTFT::CheckHeaters() { + uint8_t faultDuration = 0; float temp = 0; + + // if the hotend temp is abnormal, confirm state before signalling panel + temp = getActualTemp_celsius(E0); + if ( (temp <= HEATER_0_MINTEMP) || (temp >= HEATER_0_MAXTEMP) ) { + do { + faultDuration ++; + if (faultDuration >= AC_HEATER_FAULT_VALIDATION_TIME) { + SendtoTFTLN(AC_msg_nozzle_temp_abnormal); + SERIAL_ECHOLNPAIR("Extruder temp abnormal! : ", temp); + break; + } + delay_ms(500); + temp = getActualTemp_celsius(E0); + } while ((temp <= HEATER_0_MINTEMP) || (temp >= HEATER_0_MAXTEMP) ); + } + + // if the hotbed temp is abnormal, confirm state before signalling panel + faultDuration = 0; + temp = getActualTemp_celsius(BED); + if ( (temp <= BED_MINTEMP) || (temp >= BED_MAXTEMP) ) { + do { + faultDuration ++; + if (faultDuration >= AC_HEATER_FAULT_VALIDATION_TIME) { + SendtoTFTLN(AC_msg_nozzle_temp_abnormal); + SERIAL_ECHOLNPAIR_P("Bed temp abnormal! : ", temp); + break; + } + delay_ms(500); + temp = getActualTemp_celsius(E0); + } while ((temp <= BED_MINTEMP) || (temp >= BED_MAXTEMP) ); + } + + // Update panel with hotend heater status + if (hotend_state != AC_heater_temp_reached) { + if ( WITHIN( getActualTemp_celsius(E0) - getTargetTemp_celsius(E0), -1, 1 ) ) { + SendtoTFTLN(AC_msg_nozzle_heating_done); + hotend_state = AC_heater_temp_reached; + } + } + + // Update panel with bed heater status + if (hotbed_state != AC_heater_temp_reached) { + if ( WITHIN( getActualTemp_celsius(BED) - getTargetTemp_celsius(BED), -0.5, 0.5 ) ) { + SendtoTFTLN(AC_msg_bed_heating_done); + hotbed_state = AC_heater_temp_reached; + } + } + } + + void ChironTFT::SendFileList(int8_t startindex) { + // respond to panel request for 4 files starting at index + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("## SendFileList ## ", startindex); + #endif + SendtoTFTLN(PSTR("FN ")); + filenavigator.getFiles(startindex); + SendtoTFTLN(PSTR("END")); + } + + void ChironTFT::SelectFile() { + strncpy(selectedfile,panel_command+4,command_len-4); + selectedfile[command_len-5] = '\0'; + #if ACDEBUG(AC_FILE) + SERIAL_ECHOLNPAIR_F(" Selected File: ",selectedfile); + #endif + switch (selectedfile[0]) { + case '/': // Valid file selected + SendtoTFTLN(AC_msg_sd_file_open_success); + break; + + case '<': // .. (go up folder level) + filenavigator.upDIR(); + SendtoTFTLN(AC_msg_sd_file_open_failed); + SendFileList( 0 ); + break; + default: // enter sub folder + filenavigator.changeDIR(selectedfile); + SendtoTFTLN(AC_msg_sd_file_open_failed); + SendFileList( 0 ); + break; + } + } + + void ChironTFT::InjectCommandandWait(PGM_P cmd) { + //injectCommands_P(cmnd); queue.enqueue_now_P(cmd); + //SERIAL_ECHOLN(PSTR("Inject>")); + } + + void ChironTFT::ProcessPanelRequest() { + // Break these up into logical blocks // as its easier to navigate than one huge switch case! + int8_t req = atoi(&panel_command[1]); + + // Information requests A0 - A8 and A33 + if (req <= 8 || req == 33) PanelInfo(req); + + // Simple Actions A9 - A28 + else if ( req <= 28) PanelAction(req); + + // Process Initiation + else if (req <= 34) PanelProcess(req); + + else SendtoTFTLN(); + } + + void ChironTFT::PanelInfo(uint8_t req) { + // information requests A0-A8 and A33 + switch (req) { + case 0: // A0 Get HOTEND Temp + SendtoTFT(PSTR("A0V ")); + TFTSer.println(getActualTemp_celsius(E0)); + break; + + case 1: // A1 Get HOTEND Target Temp + SendtoTFT(PSTR("A1V ")); + TFTSer.println(getTargetTemp_celsius(E0)); + break; + + case 2: // A2 Get BED Temp + SendtoTFT(PSTR("A2V ")); + TFTSer.println(getActualTemp_celsius(BED)); + break; + + case 3: // A3 Get BED Target Temp + SendtoTFT(PSTR("A3V ")); + TFTSer.println(getTargetTemp_celsius(BED)); + break; + + case 4: // A4 Get FAN Speed + SendtoTFT(PSTR("A4V ")); + TFTSer.println(getActualFan_percent(FAN0)); + break; + + case 5: // A5 Get Current Coordinates + SendtoTFT(PSTR("A5V X: ")); + TFTSer.print(getAxisPosition_mm(X)); + SendtoTFT(PSTR(" Y: ")); + TFTSer.print(getAxisPosition_mm(Y)); + SendtoTFT(PSTR(" Z: ")); + TFTSer.println(getAxisPosition_mm(Z)); + break; + + case 6: // A6 Get printing progress + if (isPrintingFromMedia()) { + SendtoTFT(PSTR("A6V ")); + TFTSer.println(ui8tostr2(getProgress_percent())); + + } + else + SendtoTFTLN(PSTR("A6V ---")); + break; + + case 7: { // A7 Get Printing Time + uint32_t time = getProgress_seconds_elapsed() / 60; + SendtoTFT(PSTR("A7V ")); + TFTSer.print(ui8tostr2(time / 60)); + SendtoTFT(PSTR(" H ")); + TFTSer.print(ui8tostr2(time % 60)); + SendtoTFT(PSTR(" M")); + #if ACDEBUG(AC_ALL) + SERIAL_ECHOLNPAIR("Print time ", ui8tostr2(time / 60), ":", ui8tostr2(time % 60)); + #endif + } break; + + case 8: // A8 Get SD Card list A8 S0 + if (!isMediaInserted()) safe_delay(500); + if (!isMediaInserted()) // Make sure the card is removed + SendtoTFTLN(AC_msg_no_sd_card); + else if (panel_command[3] == 'S') + SendFileList( atoi( &panel_command[4] ) ); + break; + + case 33: // A33 Get firmware info + SendtoTFT(PSTR("J33 ")); + SendtoTFTLN(PSTR(SHORT_BUILD_VERSION)); + break; + } + } + + void ChironTFT::PanelAction(uint8_t req) { + switch (req) { + case 9: // A9 Pause SD print + if (isPrintingFromMedia()) { + SendtoTFTLN(AC_msg_pause); + pausePrint(); + printer_state = AC_printer_pausing; + } + else + SendtoTFTLN(AC_msg_stop); + break; + + case 10: // A10 Resume SD Print + if (pause_state == AC_paused_idle || printer_state == AC_printer_resuming_from_power_outage) + resumePrint(); + else + setUserConfirmed(); + break; + + case 11: // A11 Stop SD print + if (isPrintingFromMedia()) { + printer_state = AC_printer_stopping; + stopPrint(); + } + else { + if (printer_state == AC_printer_resuming_from_power_outage) + injectCommands_P(PSTR("M1000 C\n")); // Cancel recovery + SendtoTFTLN(AC_msg_stop); + printer_state = AC_printer_idle; + } + break; + + case 12: // A12 Kill printer + kill(); // from marlincore.h + break; + + case 13: // A13 Select file + SelectFile(); + break; + + case 14: { // A14 Start Printing + // Allows printer to restart the job if we dont want to recover + if (printer_state == AC_printer_resuming_from_power_outage) { + injectCommands_P(PSTR("M1000 C\n")); // Cancel recovery + printer_state = AC_printer_idle; + } + #if ACDebugLevel >= 1 + SERIAL_ECHOLNPAIR_F("Print: ", selectedfile); + #endif + // the card library needs a path starting // but the File api doesn't... + char file[MAX_PATH_LEN]; + file[0] = '/'; + strcpy(file + 1, selectedfile); + printFile(file); + SendtoTFTLN(AC_msg_print_from_sd_card); + } break; + + case 15: // A15 Resuming from outage + if (printer_state == AC_printer_resuming_from_power_outage) + // Need to home here to restore the Z position + injectCommands_P(AC_cmnd_power_loss_recovery); + + injectCommands_P(PSTR("M1000\n")); // home and start recovery + break; + + case 16: { // A16 Set HotEnd temp A17 S170 + const float set_Htemp = atof(&panel_command[5]); + hotend_state = set_Htemp ? AC_heater_temp_set : AC_heater_off; + switch ((char)panel_command[4]) { + // Set Temp + case 'S': case 'C': setTargetTemp_celsius(set_Htemp, E0); + } + } break; + + case 17: { // A17 Set bed temp + const float set_Btemp = atof(&panel_command[5]); + hotbed_state = set_Btemp ? AC_heater_temp_set : AC_heater_off; + if (panel_command[4] == 'S') + setTargetTemp_celsius(set_Btemp, BED); + } break; + + case 18: // A18 Set Fan Speed + if (panel_command[4] == 'S') + setTargetFan_percent(atof(&panel_command[5]), FAN0); + break; + + case 19: // A19 Motors off + if (!isPrinting()) { + disable_all_steppers(); // from marlincore.h + SendtoTFTLN(AC_msg_ready); + } + break; + + case 20: // A20 Read/write print speed + if (panel_command[4] == 'S') + setFeedrate_percent(atoi(&panel_command[5])); + else { + SendtoTFT(PSTR("A20V ")); + TFTSer.println(getFeedrate_percent()); + } + break; + + case 21: // A21 Home Axis A21 X + if (!isPrinting()) { + switch ((char)panel_command[4]) { + case 'X': injectCommands_P(PSTR("G28 X\n")); break; + case 'Y': injectCommands_P(PSTR("G28 Y\n")); break; + case 'Z': injectCommands_P(PSTR("G28 Z\n")); break; + case 'C': injectCommands_P(PSTR("G28\n")); break; + } + } + break; + + case 22: // A22 Move Axis A22 Y +10F3000 + // Ignore request if printing + if (!isPrinting()) { + // setAxisPosition_mm() uses pre defined manual feedrates so ignore the feedrate from the panel + setSoftEndstopState(true); // enable endstops + float newposition = atof(&panel_command[6]); + + #if ACDEBUG(AC_ACTION) + SERIAL_ECHOLNPAIR("Nudge ", panel_command[4], " axis ", newposition); + #endif + + switch (panel_command[4]) { + case 'X': setAxisPosition_mm(getAxisPosition_mm(X) + newposition, X); break; + case 'Y': setAxisPosition_mm(getAxisPosition_mm(Y) + newposition, Y); break; + case 'Z': setAxisPosition_mm(getAxisPosition_mm(Z) + newposition, Z); break; + case 'E': // The only time we get this command is from the filament load/unload menu + // the standard movement is too slow so we will use the load unlod GCode to speed it up a bit + if (canMove(E0) && !commandsInQueue()) + injectCommands_P(newposition > 0 ? AC_cmnd_manual_load_filament : AC_cmnd_manual_unload_filament); + break; + } + } + break; + + case 23: // A23 Preheat PLA + // Ignore request if printing + if (!isPrinting()) { + // Temps defined in configuration.h + setTargetTemp_celsius(PREHEAT_1_TEMP_BED, BED); + setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, E0); + SendtoTFTLN(); + hotbed_state = AC_heater_temp_set; + hotend_state = AC_heater_temp_set; + } + break; + + case 24: // A24 Preheat ABS + // Ignore request if printing + if (!isPrinting()) { + setTargetTemp_celsius(PREHEAT_2_TEMP_BED, BED); + setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, E0); + SendtoTFTLN(); + hotbed_state = AC_heater_temp_set; + hotend_state = AC_heater_temp_set; + } + break; + + case 25: // A25 Cool Down + // Ignore request if printing + if (!isPrinting()) { + setTargetTemp_celsius(0, E0); + setTargetTemp_celsius(0, BED); + SendtoTFTLN(AC_msg_ready); + hotbed_state = AC_heater_off; + hotend_state = AC_heater_off; + } + break; + + case 26: // A26 Refresh SD + // M22 M21 maybe needed here to reset sd card + filenavigator.reset(); + break; + + case 27: // A27 Servo Angles adjust + break; + + case 28: // A28 Filament set A28 O/C + // Ignore request if printing + if (isPrinting()) break; + SendtoTFTLN(); + break; + } + } + + void ChironTFT::PanelProcess(uint8_t req) { + switch (req) { + case 29: { // A29 Read Mesh Point A29 X1 Y1 + xy_uint8_t pos; + float pos_z; + pos.x = atoi(&panel_command[5]); + pos.y = atoi(&panel_command[8]); + pos_z = getMeshPoint(pos); + + SendtoTFT(PSTR("A29V ")); + TFTSer.println(pos_z * 100); + if (!isPrinting()) { + setSoftEndstopState(true); // disable endstops + // If the same meshpoint is selected twice in a row, move the head to that ready for adjustment + if ((selectedmeshpoint.x == pos.x) && (selectedmeshpoint.y == pos.y)) { + if (!isPositionKnown()) + injectCommands_P(PSTR("G28\n")); // home + + if (isPositionKnown()) { + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("Moving to mesh point at x: ", pos.x, " y: ", pos.y, " z: ", pos_z); + #endif + // Go up before moving + setAxisPosition_mm(3.0,Z); + + setAxisPosition_mm(17 + (93 * pos.x), X); + setAxisPosition_mm(20 + (93 * pos.y), Y); + setAxisPosition_mm(0.0, Z); + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("Current Z: ", getAxisPosition_mm(Z)); + #endif + } + } + selectedmeshpoint.x = pos.x; + selectedmeshpoint.y = pos.y; + } + } break; + + case 30: { // A30 Auto leveling + if (panel_command[3] == 'S') { // Start probing + // Ignore request if printing + if (isPrinting()) + SendtoTFTLN(AC_msg_probing_not_allowed); // forbid auto leveling + else { + injectCommands_P(isMachineHomed() ? PSTR("G29") : PSTR("G28\nG29")); + printer_state = AC_printer_probing; + SendtoTFTLN(AC_msg_start_probing); + } + } + else SendtoTFTLN(AC_msg_start_probing); + } break; + + case 31: { // A31 Adjust all Probe Points + switch (panel_command[3]) { + case 'C': // Restore and apply original offsets + if (!isPrinting()) { + injectCommands_P(PSTR("M501\nM420 S1\n")); + selectedmeshpoint.x = 99; + selectedmeshpoint.y = 99; + } + break; + case 'D': // Save Z Offset tables and restore levelling state + if (!isPrinting()) { + setAxisPosition_mm(1.0,Z); + injectCommands_P(PSTR("M500\n")); + selectedmeshpoint.x = 99; + selectedmeshpoint.y = 99; + } + break; + case 'G': // Get current offset + SendtoTFT(PSTR("A31V ")); + // When printing use the live z Offset position + // we will use babystepping to move the print head + if (isPrinting()) + TFTSer.println(live_Zoffset); + else { + TFTSer.println(getZOffset_mm()); + selectedmeshpoint.x = 99; + selectedmeshpoint.y = 99; + } + break; + case 'S': { // Set offset (adjusts all points by value) + float Zshift = atof(&panel_command[4]); + setSoftEndstopState(false); // disable endstops + // Allow temporary Z position nudging during print + // From the levelling panel use the all points UI to adjust the print pos. + if (isPrinting()) { + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("Change Zoffset from:", live_Zoffset, " to ", live_Zoffset + Zshift); + #endif + if (isAxisPositionKnown(Z)) { + #if ACDEBUG(AC_INFO) + const float currZpos = getAxisPosition_mm(Z); + SERIAL_ECHOLNPAIR("Nudge Z pos from ", currZpos, " to ", currZpos + constrain(Zshift, -0.05, 0.05)); + #endif + // Use babystepping to adjust the head position + int16_t steps = mmToWholeSteps(constrain(Zshift,-0.05,0.05), Z); + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("Steps to move Z: ", steps); + #endif + babystepAxis_steps(steps, Z); + live_Zoffset += Zshift; + } + SendtoTFT(PSTR("A31V ")); + TFTSer.println(live_Zoffset); + } + else { + GRID_LOOP(x, y) { + const xy_uint8_t pos { x, y }; + const float currval = getMeshPoint(pos); + setMeshPoint(pos, constrain(currval + Zshift, AC_LOWEST_MESHPOINT_VAL, 2)); + } + const float currZOffset = getZOffset_mm(); + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("Change probe offset from ", currZOffset, " to ", currZOffset + Zshift); + #endif + + setZOffset_mm(currZOffset + Zshift); + SendtoTFT(PSTR("A31V ")); + TFTSer.println(getZOffset_mm()); + + if (isAxisPositionKnown(Z)) { + // Move Z axis + const float currZpos = getAxisPosition_mm(Z); + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("Move Z pos from ", currZpos, " to ", currZpos + constrain(Zshift, -0.05, 0.05)); + #endif + setAxisPosition_mm(currZpos+constrain(Zshift,-0.05,0.05),Z); + } + } + } break; + } // end switch + } break; + + case 32: { // A32 clean leveling beep flag + // Ignore request if printing + //if (isPrinting()) break; + //injectCommands_P(PSTR("M500\nM420 S1\nG1 Z10 F240\nG1 X0 Y0 F6000")); + //TFTSer.println(""); + } break; + + // A33 firmware info request seet PanelInfo() + + case 34: { // A34 Adjust single mesh point A34 C/S X1 Y1 V123 + if (panel_command[3] == 'C') { // Restore original offsets + injectCommands_P(PSTR("M501\nM420 S1")); + selectedmeshpoint.x = 99; + selectedmeshpoint.y = 99; + //printer_state = AC_printer_idle; + } + else { + xy_uint8_t pos; + pos.x = atoi(&panel_command[5]); + pos.y = atoi(&panel_command[8]); + + float currmesh = getMeshPoint(pos); + float newval = atof(&panel_command[11])/100; + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("Change mesh point x:", pos.x, " y:", pos.y); + SERIAL_ECHOLNPAIR("from ", currmesh, " to ", newval); + #endif + // Update Meshpoint + setMeshPoint(pos,newval); + if ( (printer_state == AC_printer_idle) || (printer_state == AC_printer_probing) ) {//!isPrinting()) { + // if we are at the current mesh point indicated on the panel Move Z pos +/- 0.05mm ( The panel changes the mesh value by +/- 0.05mm on each button press) + if ((selectedmeshpoint.x == pos.x) && (selectedmeshpoint.y == pos.y)) { + setSoftEndstopState(false); + float currZpos = getAxisPosition_mm(Z); + #if ACDEBUG(AC_INFO) + SERIAL_ECHOLNPAIR("Move Z pos from ", currZpos, " to ", currZpos + constrain(newval - currmesh, -0.05, 0.05)); + #endif + setAxisPosition_mm(currZpos + constrain(newval - currmesh, -0.05, 0.05), Z); + } + } + } + } break; + } + } +} // namespace + +#endif // ANYCUBIC_LCD_CHIRON diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h new file mode 100644 index 000000000000..267f2fe9783f --- /dev/null +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft.h @@ -0,0 +1,77 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +/** + * lcd/extui/lib/chiron_tft.h + * + * Extensible_UI implementation for Anycubic Chiron + * Written By Nick Wells, 2020 [https://github.com/SwiftNick] + * (not affiliated with Anycubic, Ltd.) + */ + +#include "chiron_tft_defs.h" +#include "../../../../inc/MarlinConfigPre.h" +#include "../../ui_api.h" +namespace Anycubic { + + class ChironTFT { + static printer_state_t printer_state; + static paused_state_t pause_state; + static heater_state_t hotend_state; + static heater_state_t hotbed_state; + static xy_uint8_t selectedmeshpoint; + static char panel_command[MAX_CMND_LEN]; + static uint8_t command_len; + static char selectedfile[MAX_PATH_LEN]; + static float live_Zoffset; + static file_menu_t file_menu; + public: + ChironTFT(); + void Startup(); + void IdleLoop(); + void PrinterKilled(PGM_P,PGM_P); + void MediaEvent(media_event_t); + void TimerEvent(timer_event_t); + void FilamentRunout(); + void ConfirmationRequest(const char * const ); + void StatusChange(const char * const ); + void PowerLossRecovery(); + + private: + void SendtoTFT(PGM_P); + void SendtoTFTLN(PGM_P); + bool ReadTFTCommand(); + int8_t Findcmndpos(const char *, char); + void CheckHeaters(); + void SendFileList(int8_t); + void SelectFile(); + void InjectCommandandWait(PGM_P); + void ProcessPanelRequest(); + void PanelInfo(uint8_t); + void PanelAction(uint8_t); + void PanelProcess(uint8_t); + }; + + extern ChironTFT Chiron; + +} diff --git a/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h new file mode 100644 index 000000000000..937bdfde33b3 --- /dev/null +++ b/Marlin/src/lcd/extui/lib/anycubic_chiron/chiron_tft_defs.h @@ -0,0 +1,151 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * lcd/extui/lib/chiron_defs.h + * + * Extensible_UI implementation for Anycubic Chiron + * Written By Nick Wells, 2020 [https://github.com/SwiftNick] + * (not affiliated with Anycubic, Ltd.) + */ + +#pragma once +#include "../../../../inc/MarlinConfigPre.h" +//#define ACDEBUGLEVEL 255 + +#if ACDEBUGLEVEL + // Bit-masks for selective debug: + enum ACDebugMask : uint8_t { + AC_INFO = 1, + AC_ACTION = 2, + AC_FILE = 4, + AC_PANEL = 8, + AC_MARLIN = 16, + AC_SOME = 32, + AC_ALL = 64 + }; + #define ACDEBUG(mask) ( ((mask) & ACDEBUGLEVEL) == mask ) // Debug flag macro +#else + #define ACDEBUG(mask) false +#endif + +#define TFTSer LCD_SERIAL // Serial interface for TFT panel now uses marlinserial +#define MAX_FOLDER_DEPTH 4 // Limit folder depth TFT has a limit for the file path +#define MAX_CMND_LEN 16 * MAX_FOLDER_DEPTH // Maximum Length for a Panel command +#define MAX_PATH_LEN 16 * MAX_FOLDER_DEPTH // Maximum number of characters in a SD file path + +#define AC_HEATER_FAULT_VALIDATION_TIME 5 // number of 1/2 second loops before signalling a heater fault +#define AC_LOWEST_MESHPOINT_VAL -7.00 // The lowest value you can set for a single mesh point offset + + // TFT panel commands +#define AC_msg_sd_card_inserted PSTR("J00") +#define AC_msg_sd_card_removed PSTR("J01") +#define AC_msg_no_sd_card PSTR("J02") +#define AC_msg_usb_connected PSTR("J03") +#define AC_msg_print_from_sd_card PSTR("J04") +#define AC_msg_pause PSTR("J05") +#define AC_msg_nozzle_heating PSTR("J06") +#define AC_msg_nozzle_heating_done PSTR("J07") +#define AC_msg_bed_heating PSTR("J08") +#define AC_msg_bed_heating_done PSTR("J09") +#define AC_msg_nozzle_temp_abnormal PSTR("J10") +#define AC_msg_kill_lcd PSTR("J11") +#define AC_msg_ready PSTR("J12") +#define AC_msg_low_nozzle_temp PSTR("J13") +#define AC_msg_print_complete PSTR("J14") +#define AC_msg_filament_out_alert PSTR("J15") +#define AC_msg_stop PSTR("J16") +#define AC_msg_main_board_has_reset PSTR("J17") +#define AC_msg_paused PSTR("J18") +#define AC_msg_j19_unknown PSTR("J19") +#define AC_msg_sd_file_open_success PSTR("J20") +#define AC_msg_sd_file_open_failed PSTR("J21") +#define AC_msg_level_monitor_finished PSTR("J22") +#define AC_msg_filament_out_block PSTR("J23") +#define AC_msg_probing_not_allowed PSTR("J24") +#define AC_msg_probing_complete PSTR("J25") +#define AC_msg_start_probing PSTR("J26") +#define AC_msg_version PSTR("J27") + +#define MARLIN_msg_start_probing PSTR("Probing Point 1/25") +#define MARLIN_msg_probing_failed PSTR("Probing Failed") +#define MARLIN_msg_ready PSTR("3D Printer Ready.") +#define MARLIN_msg_print_paused PSTR("Print Paused") +#define MARLIN_msg_print_aborted PSTR("Print Aborted") +#define MARLIN_msg_extruder_heating PSTR("E Heating...") +#define MARLIN_msg_bed_heating PSTR("Bed Heating...") + +#define MARLIN_msg_nozzle_parked PSTR("Nozzle Parked") +#define MARLIN_msg_heater_timeout PSTR("Heater Timeout") +#define MARLIN_msg_reheating PSTR("Reheating...") +#define MARLIN_msg_reheat_done PSTR("Reheat finished.") +#define MARLIN_msg_filament_purging PSTR("Filament Purging...") +#define MARLIN_msg_special_pause PSTR("PB") +#define AC_cmnd_auto_unload_filament PSTR("M701") // Use Marlin unload routine +#define AC_cmnd_auto_load_filament PSTR("M702 M0 PB") // Use Marlin load routing then pause for user to clean nozzle + +#define AC_cmnd_manual_load_filament PSTR("M83\nG1 E50 F700\nM82") // replace the manual panel commands with something a little faster +#define AC_cmnd_manual_unload_filament PSTR("M83\nG1 E-50 F1200\nM82") +#define AC_cmnd_enable_levelling PSTR("M420 S1 V1") +#define AC_cmnd_power_loss_recovery PSTR("G28 X Y R5\nG28 Z") // Lift, home X and Y then home Z when in 'safe' position + +namespace Anycubic { + enum heater_state_t : uint8_t { + AC_heater_off, + AC_heater_temp_set, + AC_heater_temp_reached + }; + + enum paused_state_t : uint8_t { + AC_paused_heater_timed_out, + AC_paused_purging_filament, + AC_paused_idle + }; + + enum printer_state_t : uint8_t { + AC_printer_idle, + AC_printer_probing, + AC_printer_printing, + AC_printer_pausing, + AC_printer_paused, + AC_printer_stopping, + AC_printer_resuming_from_power_outage + }; + + enum timer_event_t : uint8_t { + AC_timer_started, + AC_timer_paused, + AC_timer_stopped + }; + + enum media_event_t : uint8_t { + AC_media_inserted, + AC_media_removed, + AC_media_error + }; + enum file_menu_t : uint8_t { + AC_menu_file, + AC_menu_command, + AC_menu_change_to_file, + AC_menu_change_to_command + }; +} diff --git a/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp b/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp index c69fb8351a74..efbc57e68a80 100644 --- a/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp +++ b/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.cpp @@ -24,16 +24,17 @@ #if ENABLED(ANYCUBIC_LCD_I3MEGA) #include "anycubic_i3mega_lcd.h" - -#include "../../../../inc/MarlinConfig.h" #include "../../ui_api.h" -#include "../../../../MarlinCore.h" // for quickstop_stepper and disable_steppers + +#include "../../../../libs/numtostr.h" #include "../../../../module/motion.h" // for A20 read printing speed feedrate_percentage +#include "../../../../MarlinCore.h" // for quickstop_stepper and disable_steppers +#include "../../../../inc/MarlinConfig.h" // command sending macro's with debugging capability #define SEND_PGM(x) send_P(PSTR(x)) #define SENDLINE_PGM(x) sendLine_P(PSTR(x)) -#define SEND_PGM_VAL(x,y) (send_P(PSTR(x)), sendLine(itostr3(y))) +#define SEND_PGM_VAL(x,y) (send_P(PSTR(x)), sendLine(i16tostr3rj(y))) #define SEND(x) send(x) #define SENDLINE(x) sendLine(x) #if ENABLED(ANYCUBIC_LCD_DEBUG) @@ -44,20 +45,8 @@ #define SENDLINE_DBG_PGM_VAL(x,y,z) sendLine_P(PSTR(x)) #endif - AnycubicTFTClass AnycubicTFT; -char _conv[8]; - -char *itostr2(const uint8_t &x) { - // sprintf(conv,"%5.1f",x); - int xx = x; - _conv[0] = (xx / 10) % 10 + '0'; - _conv[1] = (xx) % 10 + '0'; - _conv[2] = 0; - return _conv; -} - static void sendNewLine(void) { LCD_SERIAL.write('\r'); LCD_SERIAL.write('\n'); @@ -82,34 +71,6 @@ static void sendLine_P(PGM_P str) { sendNewLine(); } -#ifndef ULTRA_LCD - #define DIGIT(n) ('0' + (n)) - #define DIGIMOD(n, f) DIGIT((n) / (f) % 10) - #define RJDIGIT(n, f) ((n) >= (f) ? DIGIMOD(n, f) : ' ') - #define MINUSOR(n, alt) (n >= 0 ? (alt) : (n = -n, '-')) - - char* itostr3(const int x) { - int xx = x; - _conv[4] = MINUSOR(xx, RJDIGIT(xx, 100)); - _conv[5] = RJDIGIT(xx, 10); - _conv[6] = DIGIMOD(xx, 1); - return &_conv[4]; - } - -// Convert signed float to fixed-length string with 023.45 / -23.45 format - char *ftostr32(const float &x) { - long xx = x * 100; - _conv[1] = MINUSOR(xx, DIGIMOD(xx, 10000)); - _conv[2] = DIGIMOD(xx, 1000); - _conv[3] = DIGIMOD(xx, 100); - _conv[4] = '.'; - _conv[5] = DIGIMOD(xx, 10); - _conv[6] = DIGIMOD(xx, 1); - return &_conv[1]; - } - -#endif - AnycubicTFTClass::AnycubicTFTClass() {} void AnycubicTFTClass::OnSetup() { @@ -181,7 +142,7 @@ void AnycubicTFTClass::OnKillTFT() { void AnycubicTFTClass::OnSDCardStateChange(bool isInserted) { #if ENABLED(ANYCUBIC_LCD_DEBUG) SERIAL_ECHOPGM("TFT Serial Debug: OnSDCardStateChange event triggered..."); - SERIAL_ECHO(itostr2(isInserted)); + SERIAL_ECHO(ui8tostr2(isInserted)); SERIAL_EOL(); #endif DoSDCardStateCheck(); @@ -535,12 +496,12 @@ void AnycubicTFTClass::RenderCurrentFolder(uint16_t selectedNumber) { SEND_PGM("/"); SENDLINE(currentFileList.shortFilename()); SEND_PGM("/"); - SENDLINE(currentFileList.longFilename()); + SENDLINE(currentFileList.filename()); } else { SENDLINE(currentFileList.shortFilename()); - SENDLINE(currentFileList.longFilename()); + SENDLINE(currentFileList.filename()); } } } @@ -622,19 +583,15 @@ void AnycubicTFTClass::GetCommandFromTFT() { case 3: { // A3 GET HOTBED TARGET TEMP float heatedBedTargetTemp = ExtUI::getTargetTemp_celsius((ExtUI::heater_t) ExtUI::BED); SEND_PGM_VAL("A3V ", int(heatedBedTargetTemp + 0.5)); - } - break; + } break; - case 4: // A4 GET FAN SPEED - { + case 4: { // A4 GET FAN SPEED float fanPercent = ExtUI::getActualFan_percent(ExtUI::FAN0); fanPercent = constrain(fanPercent, 0, 100); SEND_PGM_VAL("A4V ", int(fanPercent)); - } - break; + } break; - case 5: // A5 GET CURRENT COORDINATE - { + case 5: { // A5 GET CURRENT COORDINATE float xPostition = ExtUI::getAxisPosition_mm(ExtUI::X); float yPostition = ExtUI::getAxisPosition_mm(ExtUI::Y); float zPostition = ExtUI::getAxisPosition_mm(ExtUI::Z); @@ -645,39 +602,34 @@ void AnycubicTFTClass::GetCommandFromTFT() { SEND_PGM(" Z: "); LCD_SERIAL.print(zPostition); SENDLINE_PGM(""); - } - break; + } break; case 6: // A6 GET SD CARD PRINTING STATUS #if ENABLED(SDSUPPORT) if (ExtUI::isPrintingFromMedia()) { SEND_PGM("A6V "); - if (ExtUI::isMediaInserted()) { - SENDLINE(itostr3(int(ExtUI::getProgress_percent()))); - } - else { + if (ExtUI::isMediaInserted()) + SENDLINE(ui8tostr3rj(ExtUI::getProgress_percent())); + else SENDLINE_DBG_PGM("J02", "TFT Serial Debug: No SD Card mounted to return printing status... J02"); - } } - else { + else SENDLINE_PGM("A6V ---"); - } #endif break; case 7: { // A7 GET PRINTING TIME - uint32_t elapsedSeconds = ExtUI::getProgress_seconds_elapsed(); + const uint32_t elapsedSeconds = ExtUI::getProgress_seconds_elapsed(); SEND_PGM("A7V "); if (elapsedSeconds != 0) { // print time - uint32_t elapsedMinutes = elapsedSeconds / 60; - SEND(itostr2(elapsedMinutes / 60)); + const uint32_t elapsedMinutes = elapsedSeconds / 60; + SEND(ui8tostr2(elapsedMinutes / 60)); SEND_PGM(" H "); - SEND(itostr2(elapsedMinutes % 60)); + SEND(ui8tostr2(elapsedMinutes % 60)); SENDLINE_PGM(" M"); } - else { + else SENDLINE_PGM(" 999:999"); - } } break; @@ -692,7 +644,6 @@ void AnycubicTFTClass::GetCommandFromTFT() { #if ENABLED(SDSUPPORT) if (ExtUI::isPrintingFromMedia()) PausePrint(); - #endif break; @@ -700,14 +651,11 @@ void AnycubicTFTClass::GetCommandFromTFT() { #if ENABLED(SDSUPPORT) if (ExtUI::isPrintingFromMediaPaused()) ResumePrint(); - #endif break; case 11: // A11 STOP SD PRINT - #if ENABLED(SDSUPPORT) - StopPrint(); - #endif + TERN_(SDSUPPORT, StopPrint()); break; case 12: // A12 kill @@ -748,7 +696,6 @@ void AnycubicTFTClass::GetCommandFromTFT() { #if ENABLED(SDSUPPORT) if (!ExtUI::isPrinting() && strlen(SelectedFile) > 0) StartPrint(); - #endif break; @@ -771,8 +718,7 @@ void AnycubicTFTClass::GetCommandFromTFT() { } break; - case 17:// A17 set heated bed temp - { + case 17: { // A17 set heated bed temp unsigned int tempbed; if (CodeSeen('S')) { tempbed = constrain(CodeValue(), 0, 100); @@ -781,19 +727,17 @@ void AnycubicTFTClass::GetCommandFromTFT() { } break; - case 18:// A18 set fan speed - { + case 18: { // A18 set fan speed float fanPercent; if (CodeSeen('S')) { fanPercent = CodeValue(); fanPercent = constrain(fanPercent, 0, 100); ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0); } - else { + else fanPercent = 100; - } - ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0); + ExtUI::setTargetFan_percent(fanPercent, ExtUI::FAN0); SENDLINE_PGM(""); } break; @@ -807,13 +751,11 @@ void AnycubicTFTClass::GetCommandFromTFT() { SENDLINE_PGM(""); break; - case 20: { // A20 read printing speed - + case 20: // A20 read printing speed if (CodeSeen('S')) feedrate_percentage = constrain(CodeValue(), 40, 999); else SEND_PGM_VAL("A20V ", feedrate_percentage); - } break; case 21: // A21 all home diff --git a/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h b/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h index ee011f1dfed6..a4ecf5604f9e 100644 --- a/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h +++ b/Marlin/src/lcd/extui/lib/anycubic_i3mega/anycubic_i3mega_lcd.h @@ -23,12 +23,6 @@ #include "../../../../inc/MarlinConfigPre.h" #include "../../../../sd/SdFatConfig.h" // for the FILENAME_LENGTH macro -char *itostr2(const uint8_t &x); -#ifndef ULTRA_LCD - char *itostr3(const int); - char *ftostr32(const float &); -#endif - #define TFTBUFSIZE 4 #define TFT_MAX_CMD_SIZE 96 diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp index 6a635b9ddb94..2c466ffd0449 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/archim2-flash/flash_storage.cpp @@ -42,7 +42,6 @@ constexpr uint32_t flash_eeprom_version = 1; * 0 16 DATA STORAGE AREA * 16 1 VERSIONING DATA * 17 inf MEDIA STORAGE AREA - * */ #define DATA_STORAGE_SIZE_64K diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h index dd4be7a79387..2429e30e79f7 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/basic/resolutions.h @@ -32,7 +32,6 @@ * Selecting an LCD Display * Version 2.1 * Issue Date: 2017-11-14 - * */ #define COMPUTE_REGS_FROM_DATASHEET \ constexpr uint16_t Hoffset = thfp + thb - 1; \ diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp index 9c5599ebe8ea..3dd2b88b19f7 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extended/event_loop.cpp @@ -109,7 +109,6 @@ namespace FTDI { * - Handles auto-repetition by sending onTouchHeld to the active screen periodically. * - Plays touch feedback "click" sounds when appropriate. * - Performs debouncing to supress spurious touch events. - * */ void EventLoop::process_events() { // If the LCD is processing commands, don't check diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h index 450b9c4415e0..a501de20ba87 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/ftdi_eve_lib/extras/poly_ui.h @@ -49,7 +49,6 @@ * ... * } * } - * */ class PolyReader { diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language_en.h b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language_en.h index bd64032729fd..cc96c8b9cda7 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language_en.h +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/language/language_en.h @@ -57,8 +57,11 @@ namespace Language_en { PROGMEM Language_Str MSG_AMAX_Y = u8"Amax Y"; PROGMEM Language_Str MSG_AMAX_Z = u8"Amax Z"; PROGMEM Language_Str MSG_AXIS_X = u8"X"; + PROGMEM Language_Str MSG_AXIS_X2 = u8"X2"; PROGMEM Language_Str MSG_AXIS_Y = u8"Y"; + PROGMEM Language_Str MSG_AXIS_Y2 = u8"Y2"; PROGMEM Language_Str MSG_AXIS_Z = u8"Z"; + PROGMEM Language_Str MSG_AXIS_Z2 = u8"Z2"; PROGMEM Language_Str MSG_AXIS_E = u8"E"; PROGMEM Language_Str MSG_AXIS_E1 = u8"E1"; PROGMEM Language_Str MSG_AXIS_E2 = u8"E2"; diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp index 67b077a55323..cfb268f0b44f 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/advanced_settings_menu.cpp @@ -38,7 +38,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) { } #ifdef TOUCH_UI_PORTRAIT - #if EITHER(CASE_LIGHT_ENABLE, SENSORLESS_HOMING) + #if EITHER(HAS_MULTI_HOTEND, SENSORLESS_HOMING) #define GRID_ROWS 9 #else #define GRID_ROWS 8 diff --git a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp index e89bbd20201f..136582f09aa7 100644 --- a/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp +++ b/Marlin/src/lcd/extui/lib/ftdi_eve_touch_ui/screens/stepper_current_screen.cpp @@ -35,20 +35,41 @@ void StepperCurrentScreen::onRedraw(draw_mode_t what) { w.precision(0); w.units(GET_TEXT_F(MSG_UNITS_MILLIAMP)); w.heading( GET_TEXT_F(MSG_TMC_CURRENT)); - w.color(x_axis) .adjuster( 2, GET_TEXT_F(MSG_AXIS_X), getAxisCurrent_mA(X) ); - w.color(y_axis) .adjuster( 4, GET_TEXT_F(MSG_AXIS_Y), getAxisCurrent_mA(Y) ); - w.color(z_axis) .adjuster( 6, GET_TEXT_F(MSG_AXIS_Z), getAxisCurrent_mA(Z) ); - #if EXTRUDERS == 1 - w.color(e_axis).adjuster( 8, GET_TEXT_F(MSG_AXIS_E), getAxisCurrent_mA(E0) ); - #elif HAS_MULTI_EXTRUDER - w.color(e_axis).adjuster( 8, GET_TEXT_F(MSG_AXIS_E1), getAxisCurrent_mA(E0) ); - w.color(e_axis).adjuster(10, GET_TEXT_F(MSG_AXIS_E2), getAxisCurrent_mA(E1) ); - #if EXTRUDERS > 2 - w.color(e_axis).adjuster(12, GET_TEXT_F(MSG_AXIS_E3), getAxisCurrent_mA(E2) ); - #endif - #if EXTRUDERS > 3 - w.color(e_axis).adjuster(14, GET_TEXT_F(MSG_AXIS_E4), getAxisCurrent_mA(E3) ); + #if AXIS_IS_TMC(X) + w.color(x_axis) .adjuster( 2, GET_TEXT_F(MSG_AXIS_X), getAxisCurrent_mA(X) ); + #endif + #if AXIS_IS_TMC(X2) + w.color(x_axis) .adjuster( 4, GET_TEXT_F(MSG_AXIS_X2), getAxisCurrent_mA(X2) ); + #endif + #if AXIS_IS_TMC(Y) + w.color(y_axis) .adjuster( 6, GET_TEXT_F(MSG_AXIS_Y), getAxisCurrent_mA(Y) ); + #endif + #if AXIS_IS_TMC(Y2) + w.color(x_axis) .adjuster( 8, GET_TEXT_F(MSG_AXIS_Y2), getAxisCurrent_mA(Y2) ); + #endif + #if AXIS_IS_TMC(Z) + w.color(z_axis) .adjuster(10, GET_TEXT_F(MSG_AXIS_Z), getAxisCurrent_mA(Z) ); + #endif + #if AXIS_IS_TMC(Z2) + w.color(z_axis) .adjuster(12, GET_TEXT_F(MSG_AXIS_Z2), getAxisCurrent_mA(Z2) ); + #endif + #if AXIS_IS_TMC(E0) + w.color(e_axis) .adjuster(14, GET_TEXT_F( + #if EXTRUDERS == 1 + MSG_AXIS_E + #else + MSG_AXIS_E1 #endif + ), getAxisCurrent_mA(E0) ); + #endif + #if AXIS_IS_TMC(E1) + w.color(e_axis).adjuster(16, GET_TEXT_F(MSG_AXIS_E2), getAxisCurrent_mA(E1) ); + #endif + #if AXIS_IS_TMC(E2) + w.color(e_axis).adjuster(18, GET_TEXT_F(MSG_AXIS_E3), getAxisCurrent_mA(E2) ); + #endif + #if AXIS_IS_TMC(E3) + w.color(e_axis).adjuster(20, GET_TEXT_F(MSG_AXIS_E4), getAxisCurrent_mA(E3) ); #endif w.increments(); } @@ -56,25 +77,45 @@ void StepperCurrentScreen::onRedraw(draw_mode_t what) { bool StepperCurrentScreen::onTouchHeld(uint8_t tag) { const float increment = getIncrement(); switch (tag) { - case 2: UI_DECREMENT(AxisCurrent_mA, X ); break; - case 3: UI_INCREMENT(AxisCurrent_mA, X ); break; - case 4: UI_DECREMENT(AxisCurrent_mA, Y ); break; - case 5: UI_INCREMENT(AxisCurrent_mA, Y ); break; - case 6: UI_DECREMENT(AxisCurrent_mA, Z ); break; - case 7: UI_INCREMENT(AxisCurrent_mA, Z ); break; - case 8: UI_DECREMENT(AxisCurrent_mA, E0); break; - case 9: UI_INCREMENT(AxisCurrent_mA, E0); break; - #if HAS_MULTI_EXTRUDER - case 10: UI_DECREMENT(AxisCurrent_mA, E1); break; - case 11: UI_INCREMENT(AxisCurrent_mA, E1); break; + #if AXIS_IS_TMC(X) + case 2: UI_DECREMENT(AxisCurrent_mA, X ); break; + case 3: UI_INCREMENT(AxisCurrent_mA, X ); break; + #endif + #if AXIS_IS_TMC(X2) + case 4: UI_DECREMENT(AxisCurrent_mA, X2 ); break; + case 5: UI_INCREMENT(AxisCurrent_mA, X2 ); break; + #endif + #if AXIS_IS_TMC(Y) + case 6: UI_DECREMENT(AxisCurrent_mA, Y ); break; + case 7: UI_INCREMENT(AxisCurrent_mA, Y ); break; + #endif + #if AXIS_IS_TMC(Y2) + case 8: UI_DECREMENT(AxisCurrent_mA, Y2 ); break; + case 9: UI_INCREMENT(AxisCurrent_mA, Y2 ); break; + #endif + #if AXIS_IS_TMC(Z) + case 10: UI_DECREMENT(AxisCurrent_mA, Z ); break; + case 11: UI_INCREMENT(AxisCurrent_mA, Z ); break; + #endif + #if AXIS_IS_TMC(Z2) + case 12: UI_DECREMENT(AxisCurrent_mA, Z2 ); break; + case 13: UI_INCREMENT(AxisCurrent_mA, Z2 ); break; + #endif + #if AXIS_IS_TMC(E0) + case 14: UI_DECREMENT(AxisCurrent_mA, E0); break; + case 15: UI_INCREMENT(AxisCurrent_mA, E0); break; + #endif + #if AXIS_IS_TMC(E1) + case 16: UI_DECREMENT(AxisCurrent_mA, E1); break; + case 17: UI_INCREMENT(AxisCurrent_mA, E1); break; #endif - #if EXTRUDERS > 2 - case 12: UI_DECREMENT(AxisCurrent_mA, E2); break; - case 13: UI_INCREMENT(AxisCurrent_mA, E2); break; + #if AXIS_IS_TMC(E2) + case 18: UI_DECREMENT(AxisCurrent_mA, E2); break; + case 19: UI_INCREMENT(AxisCurrent_mA, E2); break; #endif - #if EXTRUDERS > 3 - case 14: UI_DECREMENT(AxisCurrent_mA, E3); break; - case 15: UI_INCREMENT(AxisCurrent_mA, E3); break; + #if AXIS_IS_TMC(E3) + case 20: UI_DECREMENT(AxisCurrent_mA, E3); break; + case 21: UI_INCREMENT(AxisCurrent_mA, E3); break; #endif default: return false; diff --git a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h index 09e39d8412eb..ddc9ea62714a 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h +++ b/Marlin/src/lcd/extui/lib/mks_ui/draw_ui.h @@ -21,10 +21,6 @@ */ #pragma once -#ifdef __cplusplus - extern "C" { /* C-declarations for C++ */ -#endif - #include #include @@ -168,6 +164,10 @@ #endif // ifdef TFT35 +#ifdef __cplusplus + extern "C" { /* C-declarations for C++ */ +#endif + extern char public_buf_m[100]; extern char public_buf_l[30]; diff --git a/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h b/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h index b1bd88a60d0c..5d5227c2a480 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h +++ b/Marlin/src/lcd/extui/lib/mks_ui/pic_manager.h @@ -21,7 +21,7 @@ */ #pragma once -#include "../../../../inc/MarlinConfigPre.h" +#include "../../../../inc/MarlinConfig.h" #include "../../../../libs/W25Qxx.h" diff --git a/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp b/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp index af292db7d599..c2ff2c436264 100644 --- a/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp +++ b/Marlin/src/lcd/extui/lib/mks_ui/tft_lvgl_configuration.cpp @@ -408,7 +408,7 @@ void SysTick_Callback() { OUT_WRITE(LCD_BACKLIGHT_PIN, LOW); LCD_Clear(0x0000); - lcd_draw_logo(); + TERN_(HAS_LOGO_IN_FLASH, lcd_draw_logo()); OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH); delay(2000); @@ -724,6 +724,7 @@ lv_fs_res_t sd_open_cb (lv_fs_drv_t * drv, void * file_p, const char * path, lv_ if (temp) { strcpy(temp,".GCO"); } sd_read_base_addr = lv_open_gcode_file((char *)name_buf); sd_read_addr_offset = sd_read_base_addr; + if (sd_read_addr_offset == 0) return LV_FS_RES_NOT_EX; return LV_FS_RES_OK; } diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp index 1270e3d649f7..0acfc9c025c1 100644 --- a/Marlin/src/lcd/extui/ui_api.cpp +++ b/Marlin/src/lcd/extui/ui_api.cpp @@ -399,12 +399,21 @@ namespace ExtUI { #if AXIS_IS_TMC(X) case X: return stepperX.getMilliamps(); #endif + #if AXIS_IS_TMC(X2) + case X2: return stepperX2.getMilliamps(); + #endif #if AXIS_IS_TMC(Y) case Y: return stepperY.getMilliamps(); #endif + #if AXIS_IS_TMC(Y2) + case Y2: return stepperY2.getMilliamps(); + #endif #if AXIS_IS_TMC(Z) case Z: return stepperZ.getMilliamps(); #endif + #if AXIS_IS_TMC(Z2) + case Z2: return stepperZ2.getMilliamps(); + #endif default: return NAN; }; } @@ -442,13 +451,22 @@ namespace ExtUI { void setAxisCurrent_mA(const float mA, const axis_t axis) { switch (axis) { #if AXIS_IS_TMC(X) - case X: stepperX.rms_current(constrain(mA, 500, 1500)); break; + case X: stepperX.rms_current(constrain(mA, 400, 1500)); break; + #endif + #if AXIS_IS_TMC(X2) + case X2: stepperX2.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(Y) - case Y: stepperY.rms_current(constrain(mA, 500, 1500)); break; + case Y: stepperY.rms_current(constrain(mA, 400, 1500)); break; + #endif + #if AXIS_IS_TMC(Y2) + case Y2: stepperY2.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(Z) - case Z: stepperZ.rms_current(constrain(mA, 500, 1500)); break; + case Z: stepperZ.rms_current(constrain(mA, 400, 1500)); break; + #endif + #if AXIS_IS_TMC(Z2) + case Z2: stepperZ2.rms_current(constrain(mA, 400, 1500)); break; #endif default: break; }; @@ -457,28 +475,28 @@ namespace ExtUI { void setAxisCurrent_mA(const float mA, const extruder_t extruder) { switch (extruder) { #if AXIS_IS_TMC(E0) - case E0: stepperE0.rms_current(constrain(mA, 500, 1500)); break; + case E0: stepperE0.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(E1) - case E1: stepperE1.rms_current(constrain(mA, 500, 1500)); break; + case E1: stepperE1.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(E2) - case E2: stepperE2.rms_current(constrain(mA, 500, 1500)); break; + case E2: stepperE2.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(E3) - case E3: stepperE3.rms_current(constrain(mA, 500, 1500)); break; + case E3: stepperE3.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(E4) - case E4: stepperE4.rms_current(constrain(mA, 500, 1500)); break; + case E4: stepperE4.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(E5) - case E5: stepperE5.rms_current(constrain(mA, 500, 1500)); break; + case E5: stepperE5.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(E6) - case E6: stepperE6.rms_current(constrain(mA, 500, 1500)); break; + case E6: stepperE6.rms_current(constrain(mA, 400, 1500)); break; #endif #if AXIS_IS_TMC(E7) - case E7: stepperE7.rms_current(constrain(mA, 500, 1500)); break; + case E7: stepperE7.rms_current(constrain(mA, 400, 1500)); break; #endif default: break; }; diff --git a/Marlin/src/lcd/extui/ui_api.h b/Marlin/src/lcd/extui/ui_api.h index 02c4717d77f4..15122ec69e15 100644 --- a/Marlin/src/lcd/extui/ui_api.h +++ b/Marlin/src/lcd/extui/ui_api.h @@ -375,7 +375,6 @@ namespace ExtUI { * constexpr float increment = 10; * * UI_INCREMENT(TargetTemp_celsius, E0) - * */ #define UI_INCREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) + inc, ##__VA_ARGS__) #define UI_DECREMENT_BY(method, inc, ...) ExtUI::set ## method(ExtUI::get ## method (__VA_ARGS__) - inc, ##__VA_ARGS__) diff --git a/Marlin/src/lcd/fontutils.cpp b/Marlin/src/lcd/fontutils.cpp index 8b046af9a7a2..5bf07e1bd458 100644 --- a/Marlin/src/lcd/fontutils.cpp +++ b/Marlin/src/lcd/fontutils.cpp @@ -9,7 +9,7 @@ #include "../inc/MarlinConfig.h" -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #include "ultralcd.h" #include "../MarlinCore.h" #endif diff --git a/Marlin/src/lcd/language/language_an.h b/Marlin/src/lcd/language/language_an.h index 1cb64f985bcb..a5030fcd5636 100644 --- a/Marlin/src/lcd/language/language_an.h +++ b/Marlin/src/lcd/language/language_an.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_bg.h b/Marlin/src/lcd/language/language_bg.h index 8917d98e681a..dcb06e31e703 100644 --- a/Marlin/src/lcd/language/language_bg.h +++ b/Marlin/src/lcd/language/language_bg.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_5 diff --git a/Marlin/src/lcd/language/language_ca.h b/Marlin/src/lcd/language/language_ca.h index 1c4a029ff7dd..0657c4a75959 100644 --- a/Marlin/src/lcd/language/language_ca.h +++ b/Marlin/src/lcd/language/language_ca.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ namespace Language_ca { using namespace Language_en; // Inherit undefined strings from English diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h index b11a3686cb46..716c0a092956 100644 --- a/Marlin/src/lcd/language/language_cz.h +++ b/Marlin/src/lcd/language/language_cz.h @@ -31,7 +31,6 @@ * Translated by Petr Zahradnik, Computer Laboratory * Blog and video blog Zahradnik se bavi * https://www.zahradniksebavi.cz - * */ #define DISPLAY_CHARSET_ISO10646_CZ diff --git a/Marlin/src/lcd/language/language_da.h b/Marlin/src/lcd/language/language_da.h index da282be0b40f..0e4fa75aa610 100644 --- a/Marlin/src/lcd/language/language_da.h +++ b/Marlin/src/lcd/language/language_da.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_de.h b/Marlin/src/lcd/language/language_de.h index 875444c0e7fe..5492cd5d5901 100644 --- a/Marlin/src/lcd/language/language_de.h +++ b/Marlin/src/lcd/language/language_de.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ namespace Language_de { diff --git a/Marlin/src/lcd/language/language_el.h b/Marlin/src/lcd/language/language_el.h index 8fe888765331..fea2bf58180d 100644 --- a/Marlin/src/lcd/language/language_el.h +++ b/Marlin/src/lcd/language/language_el.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_GREEK diff --git a/Marlin/src/lcd/language/language_el_gr.h b/Marlin/src/lcd/language/language_el_gr.h index ad170a348721..344618b1375e 100644 --- a/Marlin/src/lcd/language/language_el_gr.h +++ b/Marlin/src/lcd/language/language_el_gr.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_GREEK diff --git a/Marlin/src/lcd/language/language_en.h b/Marlin/src/lcd/language/language_en.h index 04c58fd22a1d..f377a5184cb6 100644 --- a/Marlin/src/lcd/language/language_en.h +++ b/Marlin/src/lcd/language/language_en.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define en 1234 diff --git a/Marlin/src/lcd/language/language_es.h b/Marlin/src/lcd/language/language_es.h index 15fa35ac75f5..c77b12ee7749 100644 --- a/Marlin/src/lcd/language/language_es.h +++ b/Marlin/src/lcd/language/language_es.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ namespace Language_es { diff --git a/Marlin/src/lcd/language/language_eu.h b/Marlin/src/lcd/language/language_eu.h index bee571bbde25..7e35c6ee41ec 100644 --- a/Marlin/src/lcd/language/language_eu.h +++ b/Marlin/src/lcd/language/language_eu.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_fi.h b/Marlin/src/lcd/language/language_fi.h index 77424df35359..af7dd22af9f7 100644 --- a/Marlin/src/lcd/language/language_fi.h +++ b/Marlin/src/lcd/language/language_fi.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 21f7757fa953..714feeee9976 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_gl.h b/Marlin/src/lcd/language/language_gl.h index 53b0803518e5..2fd4bf69758a 100644 --- a/Marlin/src/lcd/language/language_gl.h +++ b/Marlin/src/lcd/language/language_gl.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_hr.h b/Marlin/src/lcd/language/language_hr.h index 4873f5c25492..1b2ae41fcedb 100644 --- a/Marlin/src/lcd/language/language_hr.h +++ b/Marlin/src/lcd/language/language_hr.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 // use the better font on full graphic displays. diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h index 76aff51d9cc3..f93e5ee4e267 100644 --- a/Marlin/src/lcd/language/language_hu.h +++ b/Marlin/src/lcd/language/language_hu.h @@ -29,7 +29,6 @@ * A Magyar fordítást készítette: AntoszHUN * * - * */ namespace Language_hu { diff --git a/Marlin/src/lcd/language/language_it.h b/Marlin/src/lcd/language/language_it.h index e22e58708f51..a70463956a73 100644 --- a/Marlin/src/lcd/language/language_it.h +++ b/Marlin/src/lcd/language/language_it.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_jp_kana.h b/Marlin/src/lcd/language/language_jp_kana.h index df6ad9b5d98f..f1289123a4e7 100644 --- a/Marlin/src/lcd/language/language_jp_kana.h +++ b/Marlin/src/lcd/language/language_jp_kana.h @@ -27,7 +27,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ //#define DISPLAY_CHARSET_ISO10646_KANA diff --git a/Marlin/src/lcd/language/language_ko_KR.h b/Marlin/src/lcd/language/language_ko_KR.h index 2ffcdf7b41e0..1ab03dcf57df 100644 --- a/Marlin/src/lcd/language/language_ko_KR.h +++ b/Marlin/src/lcd/language/language_ko_KR.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ namespace Language_ko_KR { using namespace Language_en; // Inherit undefined strings from English diff --git a/Marlin/src/lcd/language/language_nl.h b/Marlin/src/lcd/language/language_nl.h index c1a1a0605b31..7b6c16b3b3ac 100644 --- a/Marlin/src/lcd/language/language_nl.h +++ b/Marlin/src/lcd/language/language_nl.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_pl.h b/Marlin/src/lcd/language/language_pl.h index f6a9e12c8ee5..770c872a4099 100644 --- a/Marlin/src/lcd/language/language_pl.h +++ b/Marlin/src/lcd/language/language_pl.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_PL diff --git a/Marlin/src/lcd/language/language_pt.h b/Marlin/src/lcd/language/language_pt.h index 8bd94d06e154..56426c032104 100644 --- a/Marlin/src/lcd/language/language_pt.h +++ b/Marlin/src/lcd/language/language_pt.h @@ -27,7 +27,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_1 diff --git a/Marlin/src/lcd/language/language_pt_br.h b/Marlin/src/lcd/language/language_pt_br.h index eb1e2f9bf32e..cf2f7a0ccef1 100644 --- a/Marlin/src/lcd/language/language_pt_br.h +++ b/Marlin/src/lcd/language/language_pt_br.h @@ -27,7 +27,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ namespace Language_pt_br { using namespace Language_en; // Inherit undefined strings from English diff --git a/Marlin/src/lcd/language/language_ru.h b/Marlin/src/lcd/language/language_ru.h index b8c146e515e8..0953bb8a71f8 100644 --- a/Marlin/src/lcd/language/language_ru.h +++ b/Marlin/src/lcd/language/language_ru.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_5 diff --git a/Marlin/src/lcd/language/language_sk.h b/Marlin/src/lcd/language/language_sk.h index e936110d0768..c9dc6b1a1624 100644 --- a/Marlin/src/lcd/language/language_sk.h +++ b/Marlin/src/lcd/language/language_sk.h @@ -30,7 +30,6 @@ * * Translated by Michal Holeš, Farma MaM * https://www.facebook.com/farmamam - * */ #define DISPLAY_CHARSET_ISO10646_SK @@ -48,6 +47,7 @@ namespace Language_sk { PROGMEM Language_Str MSG_MEDIA_INSERTED = _UxGT("Karta vložená"); PROGMEM Language_Str MSG_MEDIA_REMOVED = _UxGT("Karta vybraná"); PROGMEM Language_Str MSG_MEDIA_WAITING = _UxGT("Čakám na kartu"); + PROGMEM Language_Str MSG_SD_INIT_FAIL = _UxGT("Inicial. SD zlyhala"); PROGMEM Language_Str MSG_MEDIA_READ_ERROR = _UxGT("Chyba čítania karty"); PROGMEM Language_Str MSG_MEDIA_USB_REMOVED = _UxGT("USB zaria. odstrán."); PROGMEM Language_Str MSG_MEDIA_USB_FAILED = _UxGT("Chyba spúšťania USB"); @@ -123,6 +123,7 @@ namespace Language_sk { PROGMEM Language_Str MSG_USER_MENU = _UxGT("Vlastné príkazy"); PROGMEM Language_Str MSG_M48_TEST = _UxGT("M48 Test sondy"); PROGMEM Language_Str MSG_M48_POINT = _UxGT("M48 Bod"); + PROGMEM Language_Str MSG_M48_OUT_OF_BOUNDS = _UxGT("Sonda mimo hraníc"); PROGMEM Language_Str MSG_M48_DEVIATION = _UxGT("Odchýlka"); PROGMEM Language_Str MSG_IDEX_MENU = _UxGT("IDEX režim"); PROGMEM Language_Str MSG_OFFSETS_MENU = _UxGT("Ofset nástrojov"); @@ -210,7 +211,7 @@ namespace Language_sk { PROGMEM Language_Str MSG_LED_CONTROL = _UxGT("Nastavenie LED"); PROGMEM Language_Str MSG_LEDS = _UxGT("Svetlo"); - PROGMEM Language_Str MSG_LED_PRESETS = _UxGT("Prednastavené farby"); + PROGMEM Language_Str MSG_LED_PRESETS = _UxGT("Predvolby svetla"); PROGMEM Language_Str MSG_SET_LEDS_RED = _UxGT("Červená"); PROGMEM Language_Str MSG_SET_LEDS_ORANGE = _UxGT("Oranžová"); PROGMEM Language_Str MSG_SET_LEDS_YELLOW = _UxGT("Žltá"); @@ -220,6 +221,10 @@ namespace Language_sk { PROGMEM Language_Str MSG_SET_LEDS_VIOLET = _UxGT("Fialová"); PROGMEM Language_Str MSG_SET_LEDS_WHITE = _UxGT("Biela"); PROGMEM Language_Str MSG_SET_LEDS_DEFAULT = _UxGT("Obnoviť nastavenie"); + PROGMEM Language_Str MSG_LED_CHANNEL_N = _UxGT("Kanál ="); + PROGMEM Language_Str MSG_LEDS2 = _UxGT("Svetlo #2"); + PROGMEM Language_Str MSG_NEO2_PRESETS = _UxGT("Predvolby svetla #2"); + PROGMEM Language_Str MSG_NEO2_BRIGHTNESS = _UxGT("Jas"); PROGMEM Language_Str MSG_CUSTOM_LEDS = _UxGT("Vlastná farba"); PROGMEM Language_Str MSG_INTENSITY_R = _UxGT("Inten. červenej"); PROGMEM Language_Str MSG_INTENSITY_G = _UxGT("Inten. zelenej"); @@ -350,6 +355,7 @@ namespace Language_sk { PROGMEM Language_Str MSG_PAUSING = _UxGT("Pozastavujem..."); PROGMEM Language_Str MSG_PAUSE_PRINT = _UxGT("Pozastaviť tlač"); PROGMEM Language_Str MSG_RESUME_PRINT = _UxGT("Obnoviť tlač"); + PROGMEM Language_Str MSG_HOST_START_PRINT = _UxGT("Spustiť z hosta"); PROGMEM Language_Str MSG_STOP_PRINT = _UxGT("Zastaviť tlač"); PROGMEM Language_Str MSG_PRINTING_OBJECT = _UxGT("Tlačím objekt"); PROGMEM Language_Str MSG_CANCEL_OBJECT = _UxGT("Zrušiť objekt"); @@ -450,6 +456,8 @@ namespace Language_sk { PROGMEM Language_Str MSG_COOLING = _UxGT("Ochladzovanie..."); PROGMEM Language_Str MSG_BED_HEATING = _UxGT("Ohrev podložky..."); PROGMEM Language_Str MSG_BED_COOLING = _UxGT("Ochladz. podložky..."); + PROGMEM Language_Str MSG_PROBE_HEATING = _UxGT("Ohrev sondy..."); + PROGMEM Language_Str MSG_PROBE_COOLING = _UxGT("Ochladz. sondy..."); PROGMEM Language_Str MSG_CHAMBER_HEATING = _UxGT("Ohrev komory..."); PROGMEM Language_Str MSG_CHAMBER_COOLING = _UxGT("Ochladz. komory..."); PROGMEM Language_Str MSG_DELTA_CALIBRATE = _UxGT("Delta kalibrácia"); @@ -544,7 +552,7 @@ namespace Language_sk { PROGMEM Language_Str MSG_MMU2_EJECT_RECOVER = _UxGT("Odstráňte, kliknite"); PROGMEM Language_Str MSG_MIX = _UxGT("Mix"); - PROGMEM Language_Str MSG_MIX_COMPONENT_N = _UxGT("Zložka ="); + PROGMEM Language_Str MSG_MIX_COMPONENT_N = _UxGT("Zložka ~"); PROGMEM Language_Str MSG_MIXER = _UxGT("Mixér"); PROGMEM Language_Str MSG_GRADIENT = _UxGT("Gradient"); PROGMEM Language_Str MSG_FULL_GRADIENT = _UxGT("Plný gradient"); @@ -571,6 +579,17 @@ namespace Language_sk { PROGMEM Language_Str MSG_BAD_PAGE = _UxGT("Chyb. index stránky"); PROGMEM Language_Str MSG_BAD_PAGE_SPEED = _UxGT("Chyb. rých. stránky"); + PROGMEM Language_Str MSG_EDIT_PASSWORD = _UxGT("Zmeniť heslo"); + PROGMEM Language_Str MSG_LOGIN_REQUIRED = _UxGT("Vyžad. sa prihl."); + PROGMEM Language_Str MSG_PASSWORD_SETTINGS = _UxGT("Nastavenie hesla"); + PROGMEM Language_Str MSG_ENTER_DIGIT = _UxGT("Zvoľte číslo"); + PROGMEM Language_Str MSG_CHANGE_PASSWORD = _UxGT("Zmeniť heslo"); + PROGMEM Language_Str MSG_REMOVE_PASSWORD = _UxGT("Odstrániť heslo"); + PROGMEM Language_Str MSG_PASSWORD_SET = _UxGT("Heslo je "); + PROGMEM Language_Str MSG_START_OVER = _UxGT("Začať odznova"); + PROGMEM Language_Str MSG_REMINDER_SAVE_SETTINGS = _UxGT("Nezabudnite uložiť!"); + PROGMEM Language_Str MSG_PASSWORD_REMOVED = _UxGT("Heslo odstránene"); + // // Filament Change screens show up to 3 lines on a 4-line display // ...or up to 2 lines on a 3-line display @@ -617,7 +636,11 @@ namespace Language_sk { PROGMEM Language_Str MSG_LEVEL_X_AXIS = _UxGT("Vyrovnať os X"); PROGMEM Language_Str MSG_AUTO_CALIBRATE = _UxGT("Auto-kalibrovať"); - PROGMEM Language_Str MSG_HEATER_TIMEOUT = _UxGT("Vypršal čas ohrevu"); + #if ENABLED(TOUCH_UI_FTDI_EVE) + PROGMEM Language_Str MSG_HEATER_TIMEOUT = _UxGT("Vypršal čas ohrevu, znížená teplota. Stlačte OK pre ohrev a ešte raz pre obnovu."); + #else + PROGMEM Language_Str MSG_HEATER_TIMEOUT = _UxGT("Vypršal čas ohrevu"); + #endif PROGMEM Language_Str MSG_REHEAT = _UxGT("Zohriať"); PROGMEM Language_Str MSG_REHEATING = _UxGT("Zohrievanie..."); } diff --git a/Marlin/src/lcd/language/language_test.h b/Marlin/src/lcd/language/language_test.h index b15f20619e7d..16cafbebbe2e 100644 --- a/Marlin/src/lcd/language/language_test.h +++ b/Marlin/src/lcd/language/language_test.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ // Select ONE of the following Mappers. diff --git a/Marlin/src/lcd/language/language_tr.h b/Marlin/src/lcd/language/language_tr.h index 95e4fb2a8bad..90208befe709 100644 --- a/Marlin/src/lcd/language/language_tr.h +++ b/Marlin/src/lcd/language/language_tr.h @@ -30,7 +30,6 @@ * Bu çeviri dosyasındaki sorunlar ve düzeltmeler için iletişim; * Contact for issues and corrections in this translation file; * Yücel Temel - (info@elektromanyetix.com) - https://elektromanyetix.com/ - * */ #define DISPLAY_CHARSET_ISO10646_TR diff --git a/Marlin/src/lcd/language/language_uk.h b/Marlin/src/lcd/language/language_uk.h index 9041decbb251..54171e1ebc06 100644 --- a/Marlin/src/lcd/language/language_uk.h +++ b/Marlin/src/lcd/language/language_uk.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ #define DISPLAY_CHARSET_ISO10646_5 diff --git a/Marlin/src/lcd/language/language_vi.h b/Marlin/src/lcd/language/language_vi.h index afd87d379838..fb60a5d82194 100644 --- a/Marlin/src/lcd/language/language_vi.h +++ b/Marlin/src/lcd/language/language_vi.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ namespace Language_vi { using namespace Language_en; // Inherit undefined strings from English diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index d30ee789dd85..53dac64c0b87 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ namespace Language_zh_CN { using namespace Language_en; // Inherit undefined strings from English diff --git a/Marlin/src/lcd/language/language_zh_TW.h b/Marlin/src/lcd/language/language_zh_TW.h index 6764af6d73ce..7f1fce649ea9 100644 --- a/Marlin/src/lcd/language/language_zh_TW.h +++ b/Marlin/src/lcd/language/language_zh_TW.h @@ -26,7 +26,6 @@ * * LCD Menu Messages * See also https://marlinfw.org/docs/development/lcd_language.html - * */ namespace Language_zh_TW { using namespace Language_en; // Inherit undefined strings from English diff --git a/Marlin/src/lcd/lcdprint.cpp b/Marlin/src/lcd/lcdprint.cpp index 1355dbbf2ddb..e381c590f578 100644 --- a/Marlin/src/lcd/lcdprint.cpp +++ b/Marlin/src/lcd/lcdprint.cpp @@ -26,7 +26,7 @@ #include "../inc/MarlinConfigPre.h" -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #include "lcdprint.h" @@ -73,4 +73,4 @@ lcd_uint_t lcd_put_u8str_ind_P(PGM_P const pstr, const int8_t ind, PGM_P const i return n; } -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/lcd/lcdprint.h b/Marlin/src/lcd/lcdprint.h index 031d467bf947..14df5309d7d0 100644 --- a/Marlin/src/lcd/lcdprint.h +++ b/Marlin/src/lcd/lcdprint.h @@ -34,7 +34,7 @@ #include "../inc/MarlinConfig.h" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "dogm/u8g_fontutf8.h" typedef u8g_uint_t lcd_uint_t; diff --git a/Marlin/src/lcd/menu/menu.cpp b/Marlin/src/lcd/menu/menu.cpp index 64923547e8ad..5d67410351f6 100644 --- a/Marlin/src/lcd/menu/menu.cpp +++ b/Marlin/src/lcd/menu/menu.cpp @@ -213,14 +213,14 @@ void MarlinUI::goto_screen(screenFunc_t screen, const uint16_t encoder/*=0*/, co clear_lcd(); // Re-initialize custom characters that may be re-used - #if HAS_CHARACTER_LCD + #if HAS_MARLINUI_HD44780 if (TERN1(AUTO_BED_LEVELING_UBL, !ubl.lcd_map_control)) set_custom_characters(on_status_screen() ? CHARSET_INFO : CHARSET_MENU); #endif refresh(LCDVIEW_CALL_REDRAW_NEXT); screen_changed = true; - TERN_(HAS_GRAPHICAL_LCD, drawing_screen = false); + TERN_(HAS_MARLINUI_U8GLIB, drawing_screen = false); TERN_(HAS_LCD_MENU, encoder_direction_normal()); @@ -343,8 +343,10 @@ void scroll_screen(const uint8_t limit, const bool is_menu) { #endif // BABYSTEP_ZPROBE_OFFSET void _lcd_draw_homing() { - constexpr uint8_t line = (LCD_HEIGHT - 1) / 2; - if (ui.should_draw()) MenuItem_static::draw(line, GET_TEXT(MSG_LEVEL_BED_HOMING)); + if (ui.should_draw()) { + constexpr uint8_t line = (LCD_HEIGHT - 1) / 2; + MenuItem_static::draw(line, GET_TEXT(MSG_LEVEL_BED_HOMING)); + } } #if ENABLED(LCD_BED_LEVELING) || (HAS_LEVELING && DISABLED(SLIM_LCD_MENUS)) diff --git a/Marlin/src/lcd/menu/menu.h b/Marlin/src/lcd/menu/menu.h index d69214446481..5248662823a7 100644 --- a/Marlin/src/lcd/menu/menu.h +++ b/Marlin/src/lcd/menu/menu.h @@ -39,7 +39,7 @@ typedef void (*selectFunc_t)(); #define SS_INVERT 0x02 #define SS_DEFAULT SS_CENTER -#if HAS_GRAPHICAL_LCD && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY) +#if HAS_MARLINUI_U8GLIB && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY) void _lcd_zoffset_overlay_gfx(const float zvalue); #endif @@ -215,7 +215,7 @@ void _lcd_draw_homing(); void line_to_z(const float &z); #endif -#if HAS_GRAPHICAL_LCD && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY) +#if HAS_MARLINUI_U8GLIB && EITHER(BABYSTEP_ZPROBE_GFX_OVERLAY, MESH_EDIT_GFX_OVERLAY) void _lcd_zoffset_overlay_gfx(const float zvalue); #endif diff --git a/Marlin/src/lcd/menu/menu_configuration.cpp b/Marlin/src/lcd/menu/menu_configuration.cpp index 2953b3b46454..22947ee5149a 100644 --- a/Marlin/src/lcd/menu/menu_configuration.cpp +++ b/Marlin/src/lcd/menu/menu_configuration.cpp @@ -60,7 +60,9 @@ void menu_advanced_settings(); static int8_t bar_percent = 0; if (ui.use_click()) { ui.goto_previous_screen(); - ui.set_custom_characters(CHARSET_MENU); + #if HAS_MARLINUI_HD44780 + ui.set_custom_characters(CHARSET_MENU); + #endif return; } bar_percent += (int8_t)ui.encoderPosition; @@ -73,7 +75,9 @@ void menu_advanced_settings(); void _progress_bar_test() { ui.goto_screen(progress_bar_test); - ui.set_custom_characters(CHARSET_INFO); + #if HAS_MARLINUI_HD44780 + ui.set_custom_characters(CHARSET_INFO); + #endif } #endif // LCD_PROGRESS_BAR_TEST diff --git a/Marlin/src/lcd/menu/menu_filament.cpp b/Marlin/src/lcd/menu/menu_filament.cpp index 5d02d674aa84..d116a6a398c0 100644 --- a/Marlin/src/lcd/menu/menu_filament.cpp +++ b/Marlin/src/lcd/menu/menu_filament.cpp @@ -101,9 +101,7 @@ void _menu_temp_filament_op(const PauseMode mode, const int8_t extruder) { } /** - * * "Change Filament" submenu - * */ #if E_STEPPERS > 1 || ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) diff --git a/Marlin/src/lcd/menu/menu_media.cpp b/Marlin/src/lcd/menu/menu_media.cpp index 3c0c6532f034..93ecc49d9859 100644 --- a/Marlin/src/lcd/menu/menu_media.cpp +++ b/Marlin/src/lcd/menu/menu_media.cpp @@ -99,7 +99,7 @@ class MenuItem_sdfolder : public MenuItem_sdbase { encoderTopLine = 0; ui.encoderPosition = 2 * (ENCODER_STEPS_PER_MENU_ITEM); ui.screen_changed = true; - TERN_(HAS_GRAPHICAL_LCD, ui.drawing_screen = false); + TERN_(HAS_MARLINUI_U8GLIB, ui.drawing_screen = false); ui.refresh(); } }; @@ -107,7 +107,7 @@ class MenuItem_sdfolder : public MenuItem_sdbase { void menu_media() { ui.encoder_direction_menus(); - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB static uint16_t fileCnt; if (ui.first_page) fileCnt = card.get_num_Files(); #else diff --git a/Marlin/src/lcd/menu/menu_motion.cpp b/Marlin/src/lcd/menu/menu_motion.cpp index 9fea0597db5c..4e356b3e0c56 100644 --- a/Marlin/src/lcd/menu/menu_motion.cpp +++ b/Marlin/src/lcd/menu/menu_motion.cpp @@ -205,7 +205,7 @@ void _menu_move_distance(const AxisEnum axis, const screenFunc_t func, const int #if DISABLED(HAS_GRAPHICAL_TFT) extern const char NUL_STR[]; SUBMENU_P(NUL_STR, []{ _goto_manual_move(float(SHORT_MANUAL_Z_MOVE)); }); - MENU_ITEM_ADDON_START(0 + ENABLED(HAS_CHARACTER_LCD)); + MENU_ITEM_ADDON_START(0 + ENABLED(HAS_MARLINUI_HD44780)); lcd_put_u8str(tmp); MENU_ITEM_ADDON_END(); #else diff --git a/Marlin/src/lcd/menu/menu_tune.cpp b/Marlin/src/lcd/menu/menu_tune.cpp index 758d75c8e915..b84cb8cbd777 100644 --- a/Marlin/src/lcd/menu/menu_tune.cpp +++ b/Marlin/src/lcd/menu/menu_tune.cpp @@ -46,7 +46,7 @@ #include "../../feature/babystep.h" #include "../lcdprint.h" - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #include "../dogm/ultralcd_DOGM.h" #endif @@ -68,10 +68,10 @@ const float spm = planner.steps_to_mm[axis]; MenuEditItemBase::draw_edit_screen(msg, BABYSTEP_TO_STR(spm * babystep.accum)); #if ENABLED(BABYSTEP_DISPLAY_TOTAL) - const bool in_view = TERN1(HAS_GRAPHICAL_LCD, PAGE_CONTAINS(LCD_PIXEL_HEIGHT - MENU_FONT_HEIGHT, LCD_PIXEL_HEIGHT - 1)); + const bool in_view = TERN1(HAS_MARLINUI_U8GLIB, PAGE_CONTAINS(LCD_PIXEL_HEIGHT - MENU_FONT_HEIGHT, LCD_PIXEL_HEIGHT - 1)); if (in_view) { - TERN_(HAS_GRAPHICAL_LCD, ui.set_font(FONT_MENU)); - lcd_moveto(0, TERN(HAS_GRAPHICAL_LCD, LCD_PIXEL_HEIGHT - MENU_FONT_DESCENT, LCD_HEIGHT - 1)); + TERN_(HAS_MARLINUI_U8GLIB, ui.set_font(FONT_MENU)); + lcd_moveto(0, TERN(HAS_MARLINUI_U8GLIB, LCD_PIXEL_HEIGHT - MENU_FONT_DESCENT, LCD_HEIGHT - 1)); lcd_put_u8str_P(GET_TEXT(MSG_BABYSTEP_TOTAL)); lcd_put_wchar(':'); lcd_put_u8str(BABYSTEP_TO_STR(spm * babystep.axis_total[BS_TOTAL_IND(axis)])); diff --git a/Marlin/src/lcd/menu/menu_ubl.cpp b/Marlin/src/lcd/menu/menu_ubl.cpp index d034de095215..2cd300958f8b 100644 --- a/Marlin/src/lcd/menu/menu_ubl.cpp +++ b/Marlin/src/lcd/menu/menu_ubl.cpp @@ -59,10 +59,14 @@ inline float rounded_mesh_value() { static void _lcd_mesh_fine_tune(PGM_P const msg) { ui.defer_status_screen(); if (ubl.encoder_diff) { - mesh_edit_accumulator += ubl.encoder_diff > 0 ? 0.005f : -0.005f; + mesh_edit_accumulator += TERN(IS_TFTGLCD_PANEL, + ubl.encoder_diff * 0.005f / ENCODER_PULSES_PER_STEP, + ubl.encoder_diff > 0 ? 0.005f : -0.005f + ); ubl.encoder_diff = 0; - ui.refresh(LCDVIEW_CALL_REDRAW_NEXT); + TERN(IS_TFTGLCD_PANEL,,ui.refresh(LCDVIEW_CALL_REDRAW_NEXT)); } + TERN_(IS_TFTGLCD_PANEL, ui.refresh(LCDVIEW_CALL_REDRAW_NEXT)); if (ui.should_draw()) { const float rounded_f = rounded_mesh_value(); diff --git a/Marlin/src/lcd/tft/tft_color.h b/Marlin/src/lcd/tft/tft_color.h index 8e380b366b97..a72a079f6ee4 100644 --- a/Marlin/src/lcd/tft/tft_color.h +++ b/Marlin/src/lcd/tft/tft_color.h @@ -73,104 +73,104 @@ #define COLOR_BACKGROUND 0x20AC // #1E156E #endif #ifndef COLOR_SELECTION_BG - #define COLOR_SELECTION_BG 0x9930 // #992380 + #define COLOR_SELECTION_BG 0x9930 // #992380 #endif #ifndef COLOR_WEBSITE_URL - #define COLOR_WEBSITE_URL 0x03B7 + #define COLOR_WEBSITE_URL 0x03B7 #endif #ifndef COLOR_INACTIVE - #define COLOR_INACTIVE COLOR_GREY + #define COLOR_INACTIVE COLOR_GREY #endif #ifndef COLOR_COLD - #define COLOR_COLD COLOR_AQUA + #define COLOR_COLD COLOR_AQUA #endif #ifndef COLOR_HOTEND - #define COLOR_HOTEND COLOR_SCARLET + #define COLOR_HOTEND COLOR_SCARLET #endif #ifndef COLOR_HEATED_BED - #define COLOR_HEATED_BED COLOR_DARK_ORANGE + #define COLOR_HEATED_BED COLOR_DARK_ORANGE #endif #ifndef COLOR_CHAMBER - #define COLOR_CHAMBER COLOR_DARK_ORANGE + #define COLOR_CHAMBER COLOR_DARK_ORANGE #endif #ifndef COLOR_FAN - #define COLOR_FAN COLOR_AQUA + #define COLOR_FAN COLOR_AQUA #endif #ifndef COLOR_AXIS_HOMED - #define COLOR_AXIS_HOMED COLOR_WHITE + #define COLOR_AXIS_HOMED COLOR_WHITE #endif #ifndef COLOR_AXIS_NOT_HOMED - #define COLOR_AXIS_NOT_HOMED COLOR_YELLOW + #define COLOR_AXIS_NOT_HOMED COLOR_YELLOW #endif #ifndef COLOR_RATE_100 - #define COLOR_RATE_100 COLOR_VIVID_GREEN + #define COLOR_RATE_100 COLOR_VIVID_GREEN #endif #ifndef COLOR_RATE_ALTERED - #define COLOR_RATE_ALTERED COLOR_YELLOW + #define COLOR_RATE_ALTERED COLOR_YELLOW #endif #ifndef COLOR_PRINT_TIME - #define COLOR_PRINT_TIME COLOR_AQUA + #define COLOR_PRINT_TIME COLOR_AQUA #endif #ifndef COLOR_PROGRESS_FRAME - #define COLOR_PROGRESS_FRAME COLOR_WHITE + #define COLOR_PROGRESS_FRAME COLOR_WHITE #endif #ifndef COLOR_PROGRESS_BAR - #define COLOR_PROGRESS_BAR COLOR_BLUE + #define COLOR_PROGRESS_BAR COLOR_BLUE #endif #ifndef COLOR_PROGRESS_BG - #define COLOR_PROGRESS_BG COLOR_BLACK + #define COLOR_PROGRESS_BG COLOR_BLACK #endif #ifndef COLOR_STATUS_MESSAGE - #define COLOR_STATUS_MESSAGE COLOR_YELLOW + #define COLOR_STATUS_MESSAGE COLOR_YELLOW #endif #ifndef COLOR_CONTROL_ENABLED - #define COLOR_CONTROL_ENABLED COLOR_WHITE + #define COLOR_CONTROL_ENABLED COLOR_WHITE #endif #ifndef COLOR_CONTROL_DISABLED - #define COLOR_CONTROL_DISABLED COLOR_GREY + #define COLOR_CONTROL_DISABLED COLOR_GREY #endif #ifndef COLOR_CONTROL_CANCEL - #define COLOR_CONTROL_CANCEL COLOR_SCARLET + #define COLOR_CONTROL_CANCEL COLOR_SCARLET #endif #ifndef COLOR_CONTROL_CONFIRM - #define COLOR_CONTROL_CONFIRM COLOR_VIVID_GREEN + #define COLOR_CONTROL_CONFIRM COLOR_VIVID_GREEN #endif #ifndef COLOR_BUSY - #define COLOR_BUSY COLOR_SILVER + #define COLOR_BUSY COLOR_SILVER #endif #ifndef COLOR_MENU_TEXT - #define COLOR_MENU_TEXT COLOR_YELLOW + #define COLOR_MENU_TEXT COLOR_YELLOW #endif #ifndef COLOR_MENU_VALUE - #define COLOR_MENU_VALUE COLOR_WHITE + #define COLOR_MENU_VALUE COLOR_WHITE #endif #ifndef COLOR_SLIDER - #define COLOR_SLIDER COLOR_WHITE + #define COLOR_SLIDER COLOR_WHITE #endif #ifndef COLOR_SLIDER_INACTIVE - #define COLOR_SLIDER_INACTIVE COLOR_GREY + #define COLOR_SLIDER_INACTIVE COLOR_GREY #endif #ifndef COLOR_UBL - #define COLOR_UBL COLOR_WHITE + #define COLOR_UBL COLOR_WHITE #endif #ifndef COLOR_TOUCH_CALIBRATION - #define COLOR_TOUCH_CALIBRATION COLOR_WHITE + #define COLOR_TOUCH_CALIBRATION COLOR_WHITE #endif #ifndef COLOR_KILL_SCREEN_BG - #define COLOR_KILL_SCREEN_BG COLOR_MAROON + #define COLOR_KILL_SCREEN_BG COLOR_MAROON #endif #ifndef COLOR_KILL_SCREEN_TEXT - #define COLOR_KILL_SCREEN_TEXT COLOR_WHITE + #define COLOR_KILL_SCREEN_TEXT COLOR_WHITE #endif diff --git a/Marlin/src/lcd/tft/ui_480x320.cpp b/Marlin/src/lcd/tft/ui_480x320.cpp index ffc619e8dcaf..549cbc4d9ba5 100644 --- a/Marlin/src/lcd/tft/ui_480x320.cpp +++ b/Marlin/src/lcd/tft/ui_480x320.cpp @@ -924,7 +924,7 @@ static void do_home() { drawMessage(GET_TEXT(MSG_LEVEL_BED_HOMING)); queue.inject_P(G28_STR); // Disable touch until home is done - touch.disable(); + TERN_(HAS_TFT_XPT2046, touch.disable()); drawAxisValue(E_AXIS); drawAxisValue(X_AXIS); drawAxisValue(Y_AXIS); @@ -972,14 +972,14 @@ static void drawBtn(int x, int y, const char* label, int32_t data, MarlinImage i tft.add_image(0, 0, img, bgColor, COLOR_BACKGROUND, COLOR_DARKGREY); } - if (enabled) touch.add_control(BUTTON, x, y, width, height, data); + TERN_(HAS_TFT_XPT2046, if (enabled) touch.add_control(BUTTON, x, y, width, height, data)); } void MarlinUI::move_axis_screen() { // Reset defer_status_screen(true); motionAxisState.blocked = false; - touch.enable(); + TERN_(HAS_TFT_XPT2046, touch.enable()); ui.clear_lcd(); @@ -1016,13 +1016,13 @@ void MarlinUI::move_axis_screen() { motionAxisState.eNamePos.x = x; motionAxisState.eNamePos.y = y; drawCurESelection(); - if (!busy) touch.add_control(BUTTON, x, y, BTN_WIDTH, BTN_HEIGHT, (int32_t)e_select); + TERN_(HAS_TFT_XPT2046, if (!busy) touch.add_control(BUTTON, x, y, BTN_WIDTH, BTN_HEIGHT, (int32_t)e_select)); x += BTN_WIDTH + spacing; drawBtn(x, y, "X-", (int32_t)x_minus, imgLeft, X_BTN_COLOR, !busy); x += BTN_WIDTH + spacing; //imgHome is 64x64 - add_control(TFT_WIDTH / 2 - Images[imgHome].width / 2, y - (Images[imgHome].width - BTN_HEIGHT) / 2, BUTTON, (int32_t)do_home, imgHome, !busy); + TERN_(HAS_TFT_XPT2046, add_control(TFT_WIDTH / 2 - Images[imgHome].width / 2, y - (Images[imgHome].width - BTN_HEIGHT) / 2, BUTTON, (int32_t)do_home, imgHome, !busy)); x += BTN_WIDTH + spacing; uint16_t xplus_x = x; @@ -1071,13 +1071,13 @@ void MarlinUI::move_axis_screen() { motionAxisState.stepValuePos.y = y; if (!busy) { drawCurStepValue(); - touch.add_control(BUTTON, motionAxisState.stepValuePos.x, motionAxisState.stepValuePos.y, CUR_STEP_VALUE_WIDTH, BTN_HEIGHT, (int32_t)step_size); + TERN_(HAS_TFT_XPT2046, touch.add_control(BUTTON, motionAxisState.stepValuePos.x, motionAxisState.stepValuePos.y, CUR_STEP_VALUE_WIDTH, BTN_HEIGHT, (int32_t)step_size)); } // alinged with x+ drawBtn(xplus_x, TFT_HEIGHT - Y_MARGIN - BTN_HEIGHT, "off", (int32_t)disable_steppers, imgCancel, COLOR_WHITE, !busy); - add_control(TFT_WIDTH - X_MARGIN - BTN_WIDTH, y, BACK, imgBack); + TERN_(HAS_TFT_XPT2046, add_control(TFT_WIDTH - X_MARGIN - BTN_WIDTH, y, BACK, imgBack)); } #undef BTN_WIDTH diff --git a/Marlin/src/lcd/thermistornames.h b/Marlin/src/lcd/thermistornames.h index bd0ca0e554e5..37f285d483cd 100644 --- a/Marlin/src/lcd/thermistornames.h +++ b/Marlin/src/lcd/thermistornames.h @@ -108,6 +108,8 @@ #define THERMISTOR_NAME "100k with 10k pull-up" // Modified thermistors +#elif THERMISTOR_ID == 30 + #define THERMISTOR_NAME "Kis3d EN AW NTC100K/3950" #elif THERMISTOR_ID == 51 #define THERMISTOR_NAME "EPCOS 1K" #elif THERMISTOR_ID == 52 diff --git a/Marlin/src/lcd/touch/touch_buttons.cpp b/Marlin/src/lcd/touch/touch_buttons.cpp index 8eae73df1194..c97018c379c0 100644 --- a/Marlin/src/lcd/touch/touch_buttons.cpp +++ b/Marlin/src/lcd/touch/touch_buttons.cpp @@ -74,7 +74,7 @@ TouchButtons touch; void TouchButtons::init() { touchIO.Init(); } uint8_t TouchButtons::read_buttons() { - #ifdef HAS_SPI_LCD + #ifdef HAS_WIRED_LCD int16_t x, y; if (!touchIO.getRawPoint(&x, &y)) return 0; diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp index fc55c3c2f6c9..de534e40236b 100644 --- a/Marlin/src/lcd/ultralcd.cpp +++ b/Marlin/src/lcd/ultralcd.cpp @@ -51,7 +51,7 @@ MarlinUI ui; constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(STATUS_MESSAGE_SCROLLING) uint8_t MarlinUI::status_scroll_offset; // = 0 constexpr uint8_t MAX_MESSAGE_LENGTH = _MAX(LONG_FILENAME_LENGTH, MAX_LANG_CHARSIZE * 2 * (LCD_WIDTH)); @@ -62,7 +62,7 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; constexpr uint8_t MAX_MESSAGE_LENGTH = 63; #endif -#if EITHER(HAS_SPI_LCD, EXTENSIBLE_UI) +#if EITHER(HAS_WIRED_LCD, EXTENSIBLE_UI) uint8_t MarlinUI::alert_level; // = 0 char MarlinUI::status_message[MAX_MESSAGE_LENGTH + 1]; #endif @@ -114,9 +114,9 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; } #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #include "dogm/ultralcd_DOGM.h" #endif @@ -167,7 +167,7 @@ uint8_t MarlinUI::lcd_status_update_delay = 1; // First update one loop delayed millis_t MarlinUI::next_button_update_ms; // = 0 -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB bool MarlinUI::drawing_screen, MarlinUI::first_page; // = false #endif @@ -372,7 +372,7 @@ void MarlinUI::init() { #endif // HAS_SHIFT_ENCODER - #if HAS_ENCODER_ACTION && HAS_SLOW_BUTTONS + #if BOTH(HAS_ENCODER_ACTION, HAS_SLOW_BUTTONS) slow_buttons = 0; #endif @@ -506,7 +506,7 @@ bool MarlinUI::get_blink() { * This is very display-dependent, so the lcd implementation draws this. */ -#if ENABLED(LCD_PROGRESS_BAR) +#if ENABLED(LCD_PROGRESS_BAR) && !IS_TFTGLCD_PANEL millis_t MarlinUI::progress_bar_ms; // = 0 #if PROGRESS_MSG_EXPIRE > 0 millis_t MarlinUI::expire_status_ms; // = 0 @@ -517,7 +517,7 @@ void MarlinUI::status_screen() { TERN_(HAS_LCD_MENU, ENCODER_RATE_MULTIPLY(false)); - #if ENABLED(LCD_PROGRESS_BAR) + #if ENABLED(LCD_PROGRESS_BAR) && !IS_TFTGLCD_PANEL // // HD44780 implements the following message blinking and @@ -873,7 +873,7 @@ void MarlinUI::update() { #endif // HAS_LCD_MENU - if (ELAPSED(ms, next_lcd_update_ms) || TERN0(HAS_GRAPHICAL_LCD, drawing_screen)) { + if (ELAPSED(ms, next_lcd_update_ms) || TERN0(HAS_MARLINUI_U8GLIB, drawing_screen)) { next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL; @@ -915,7 +915,7 @@ void MarlinUI::update() { const bool encoderPastThreshold = (abs_diff >= epps); if (encoderPastThreshold || lcd_clicked) { - if (encoderPastThreshold) { + if (encoderPastThreshold && TERN1(IS_TFTGLCD_PANEL, !external_control)) { #if BOTH(HAS_LCD_MENU, ENCODER_RATE_MULTIPLIER) @@ -971,7 +971,7 @@ void MarlinUI::update() { // This runs every ~100ms when idling often enough. // Instead of tracking changes just redraw the Status Screen once per second. if (on_status_screen() && !lcd_status_update_delay--) { - lcd_status_update_delay = TERN(HAS_GRAPHICAL_LCD, 12, 9); + lcd_status_update_delay = TERN(HAS_MARLINUI_U8GLIB, 12, 9); if (max_display_update_time) max_display_update_time--; // Be sure never go to a very big number refresh(LCDVIEW_REDRAW_NOW); } @@ -1010,7 +1010,7 @@ void MarlinUI::update() { TERN_(HAS_ADC_BUTTONS, keypad_buttons = 0); - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #if ENABLED(LIGHTWEIGHT_UI) const bool in_status = on_status_screen(), @@ -1260,6 +1260,12 @@ void MarlinUI::update() { TERN(REPRAPWORLD_KEYPAD, keypad_buttons, buttons) = ~val; #endif + #if IS_TFTGLCD_PANEL + next_button_update_ms = now + (LCD_UPDATE_INTERVAL / 2); + buttons = slow_buttons; + TERN_(AUTO_BED_LEVELING_UBL, external_encoder()); + #endif + } // next_button_update_ms #if HAS_ENCODER_WHEEL @@ -1294,7 +1300,7 @@ void MarlinUI::update() { #endif // HAS_ENCODER_ACTION -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if HAS_DISPLAY @@ -1331,7 +1337,7 @@ void MarlinUI::update() { const millis_t ms = millis(); #endif - #if ENABLED(LCD_PROGRESS_BAR) + #if ENABLED(LCD_PROGRESS_BAR) && !IS_TFTGLCD_PANEL progress_bar_ms = ms; #if PROGRESS_MSG_EXPIRE > 0 expire_status_ms = persist ? 0 : ms + PROGRESS_MSG_EXPIRE; @@ -1342,7 +1348,7 @@ void MarlinUI::update() { next_filament_display = ms + 5000UL; // Show status message for 5s #endif - #if BOTH(HAS_SPI_LCD, STATUS_MESSAGE_SCROLLING) + #if BOTH(HAS_WIRED_LCD, STATUS_MESSAGE_SCROLLING) status_scroll_offset = 0; #endif @@ -1501,7 +1507,7 @@ void MarlinUI::update() { set_status_P(print_paused); #if ENABLED(PARK_HEAD_ON_PAUSE) - TERN_(HAS_SPI_LCD, lcd_pause_show_message(PAUSE_MESSAGE_PARKING, PAUSE_MODE_PAUSE_PRINT)); // Show message immediately to let user know about pause in progress + TERN_(HAS_WIRED_LCD, lcd_pause_show_message(PAUSE_MESSAGE_PARKING, PAUSE_MODE_PAUSE_PRINT)); // Show message immediately to let user know about pause in progress queue.inject_P(PSTR("M25 P\nM24")); #elif ENABLED(SDSUPPORT) queue.inject_P(PSTR("M25")); @@ -1610,11 +1616,11 @@ void MarlinUI::update() { refresh(); - #if HAS_SPI_LCD || defined(LED_BACKLIGHT_TIMEOUT) + #if HAS_WIRED_LCD || defined(LED_BACKLIGHT_TIMEOUT) const millis_t ms = millis(); #endif - TERN_(HAS_SPI_LCD, next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL); // Delay LCD update for SD activity + TERN_(HAS_WIRED_LCD, next_lcd_update_ms = ms + LCD_UPDATE_INTERVAL); // Delay LCD update for SD activity #ifdef LED_BACKLIGHT_TIMEOUT leds.reset_timeout(ms); diff --git a/Marlin/src/lcd/ultralcd.h b/Marlin/src/lcd/ultralcd.h index 59e7cbe7d1ce..c7ef41596df5 100644 --- a/Marlin/src/lcd/ultralcd.h +++ b/Marlin/src/lcd/ultralcd.h @@ -34,18 +34,18 @@ #if EITHER(HAS_LCD_MENU, ULTIPANEL_FEEDMULTIPLY) #define HAS_ENCODER_ACTION 1 #endif -#if (!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTONS_EXIST(EN1, EN2) +#if ((!HAS_ADC_BUTTONS && ENABLED(NEWPANEL)) || BUTTONS_EXIST(EN1, EN2)) && !IS_TFTGLCD_PANEL #define HAS_ENCODER_WHEEL 1 #endif #if HAS_ENCODER_WHEEL || ANY_BUTTON(ENC, BACK, UP, DWN, LFT, RT) #define HAS_DIGITAL_BUTTONS 1 #endif -#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_SPI_LCD && DISABLED(NEWPANEL))) +#if !HAS_ADC_BUTTONS && (ENABLED(REPRAPWORLD_KEYPAD) || (HAS_WIRED_LCD && DISABLED(NEWPANEL))) #define HAS_SHIFT_ENCODER 1 #endif // I2C buttons must be read in the main thread -#if EITHER(LCD_I2C_VIKI, LCD_I2C_PANELOLU2) +#if ANY(LCD_I2C_VIKI, LCD_I2C_PANELOLU2, IS_TFTGLCD_PANEL) #define HAS_SLOW_BUTTONS 1 #endif @@ -53,7 +53,7 @@ #define MULTI_MANUAL 1 #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #include "../MarlinCore.h" @@ -104,7 +104,7 @@ #endif // HAS_LCD_MENU -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // REPRAPWORLD_KEYPAD (and ADC_KEYPAD) #if ENABLED(REPRAPWORLD_KEYPAD) @@ -215,7 +215,7 @@ #endif -#if BUTTON_EXISTS(BACK) || HAS_TOUCH_XPT2046 +#if BUTTON_EXISTS(BACK) || EITHER(HAS_TOUCH_XPT2046, IS_TFTGLCD_PANEL) #define BLEN_D 3 #define EN_D _BV(BLEN_D) #define LCD_BACK_CLICKED() (buttons & EN_D) @@ -231,7 +231,7 @@ #endif #endif -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB enum MarlinFont : uint8_t { FONT_STATUSMENU = 1, FONT_EDIT, @@ -316,11 +316,11 @@ class MarlinUI { static void refresh(); #else FORCE_INLINE static void refresh() { - TERN_(HAS_SPI_LCD, refresh(LCDVIEW_CLEAR_CALL_REDRAW)); + TERN_(HAS_WIRED_LCD, refresh(LCDVIEW_CLEAR_CALL_REDRAW)); } #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD static bool detected(); static void init_lcd(); #else @@ -381,7 +381,7 @@ class MarlinUI { static void pause_print(); static void resume_print(); - #if HAS_SPI_LCD + #if HAS_WIRED_LCD static millis_t next_button_update_ms; @@ -403,7 +403,7 @@ class MarlinUI { static void show_bootscreen(); #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB static void set_font(const MarlinFont font_nr); @@ -458,7 +458,7 @@ class MarlinUI { #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB static bool drawing_screen, first_page; #else static constexpr bool drawing_screen = false, first_page = true; @@ -577,7 +577,7 @@ class MarlinUI { static void draw_select_screen_prompt(PGM_P const pref, const char * const string=nullptr, PGM_P const suff=nullptr); - #elif HAS_SPI_LCD + #elif HAS_WIRED_LCD static constexpr bool lcd_clicked = false; static constexpr bool on_status_screen() { return true; } @@ -692,7 +692,7 @@ class MarlinUI { static void finish_status(const bool persist); #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD #if HAS_LCD_MENU && LCD_TIMEOUT_TO_STATUS > 0 static bool defer_return_to_status; #else diff --git a/Marlin/src/libs/buzzer.h b/Marlin/src/libs/buzzer.h index 022d94deafea..e901660c87d1 100644 --- a/Marlin/src/libs/buzzer.h +++ b/Marlin/src/libs/buzzer.h @@ -84,9 +84,9 @@ public: /** - * @brief Class constructor + * @brief Init Buzzer */ - Buzzer() { + static inline void init() { SET_OUTPUT(BEEPER_PIN); reset(); } diff --git a/Marlin/src/libs/least_squares_fit.cpp b/Marlin/src/libs/least_squares_fit.cpp index ef6ef9e90d80..c7593c049fc4 100644 --- a/Marlin/src/libs/least_squares_fit.cpp +++ b/Marlin/src/libs/least_squares_fit.cpp @@ -29,7 +29,6 @@ * it saves roughly 10K of program memory. It also does not require all of * coordinates to be present during the calculations. Each point can be * probed and then discarded. - * */ #include "../inc/MarlinConfig.h" diff --git a/Marlin/src/libs/least_squares_fit.h b/Marlin/src/libs/least_squares_fit.h index 5cd6a02514c5..44ca8afc76d8 100644 --- a/Marlin/src/libs/least_squares_fit.h +++ b/Marlin/src/libs/least_squares_fit.h @@ -30,7 +30,6 @@ * it saves roughly 10K of program memory. And even better... the data * fed into the algorithm does not need to all be present at the same time. * A point can be probed and its values fed into the algorithm and then discarded. - * */ #include "../inc/MarlinConfig.h" diff --git a/Marlin/src/libs/numtostr.cpp b/Marlin/src/libs/numtostr.cpp index 3b36c180e838..c3efb2b25a84 100644 --- a/Marlin/src/libs/numtostr.cpp +++ b/Marlin/src/libs/numtostr.cpp @@ -52,6 +52,13 @@ const char* ui8tostr3rj(const uint8_t i) { return &conv[4]; } +// Convert uint8_t to string with 12 format +const char* ui8tostr2(const uint8_t i) { + conv[5] = DIGIMOD(i, 10); + conv[6] = DIGIMOD(i, 1); + return &conv[5]; +} + // Convert signed 8bit int to rj string with 123 or -12 format const char* i8tostr3rj(const int8_t x) { int xx = x; diff --git a/Marlin/src/libs/numtostr.h b/Marlin/src/libs/numtostr.h index e52a7d9889ce..e7c1e67e12d5 100644 --- a/Marlin/src/libs/numtostr.h +++ b/Marlin/src/libs/numtostr.h @@ -26,6 +26,9 @@ // Convert a full-range unsigned 8bit int to a percentage const char* ui8tostr4pctrj(const uint8_t i); +// Convert uint8_t to string with 12 format +const char* ui8tostr2(const uint8_t x); + // Convert uint8_t to string with 123 format const char* ui8tostr3rj(const uint8_t i); diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp index a3a89736e5aa..712182a0ea40 100644 --- a/Marlin/src/module/endstops.cpp +++ b/Marlin/src/module/endstops.cpp @@ -351,7 +351,7 @@ void Endstops::event_handler() { if (hit_state == prev_hit_state) return; prev_hit_state = hit_state; if (hit_state) { - #if HAS_SPI_LCD + #if HAS_WIRED_LCD char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' '; #define _SET_STOP_CHAR(A,C) (chr## A = C) #else @@ -382,7 +382,7 @@ void Endstops::event_handler() { #endif SERIAL_EOL(); - TERN_(HAS_SPI_LCD, ui.status_printf_P(0, PSTR(S_FMT " %c %c %c %c"), GET_TEXT(MSG_LCD_ENDSTOPS), chrX, chrY, chrZ, chrP)); + TERN_(HAS_WIRED_LCD, ui.status_printf_P(0, PSTR(S_FMT " %c %c %c %c"), GET_TEXT(MSG_LCD_ENDSTOPS), chrX, chrY, chrZ, chrP)); #if BOTH(SD_ABORT_ON_ENDSTOP_HIT, SDSUPPORT) if (planner.abort_on_endstop_hit) { diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 30e1ffb0cafb..4ad7c4ccf044 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -234,7 +234,7 @@ float Planner::previous_nominal_speed_sqr; xyze_pos_t Planner::position_cart; #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD volatile uint32_t Planner::block_buffer_runtime_us = 0; #endif @@ -339,7 +339,6 @@ void Planner::init() { * const uint32_t r = _BV(24) - x * d; // Estimate remainder * if (r >= d) x++; // Check whether to adjust result * return uint32_t(x); // x holds the proper estimation - * */ static uint32_t get_period_inverse(uint32_t d) { @@ -747,7 +746,7 @@ block_t* Planner::get_current_block() { if (TEST(block->flag, BLOCK_BIT_RECALCULATE)) return nullptr; // We can't be sure how long an active block will take, so don't count it. - TERN_(HAS_SPI_LCD, block_buffer_runtime_us -= block->segment_time_us); + TERN_(HAS_WIRED_LCD, block_buffer_runtime_us -= block->segment_time_us); // As this block is busy, advance the nonbusy block pointer block_buffer_nonbusy = next_block_index(block_buffer_tail); @@ -761,7 +760,7 @@ block_t* Planner::get_current_block() { } // The queue became empty - TERN_(HAS_SPI_LCD, clear_block_buffer_runtime()); // paranoia. Buffer is empty now - so reset accumulated time to zero. + TERN_(HAS_WIRED_LCD, clear_block_buffer_runtime()); // paranoia. Buffer is empty now - so reset accumulated time to zero. return nullptr; } @@ -1578,7 +1577,7 @@ void Planner::quick_stop() { // forced to empty, there's no risk the ISR will touch this. delay_before_delivering = BLOCK_DELAY_FOR_1ST_MOVE; - #if HAS_SPI_LCD + #if HAS_WIRED_LCD // Clear the accumulated runtime clear_block_buffer_runtime(); #endif @@ -2081,7 +2080,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, const uint8_t moves_queued = nonbusy_movesplanned(); // Slow down when the buffer starts to empty, rather than wait at the corner for a buffer refill - #if EITHER(SLOWDOWN, HAS_SPI_LCD) || defined(XY_FREQUENCY_LIMIT) + #if EITHER(SLOWDOWN, HAS_WIRED_LCD) || defined(XY_FREQUENCY_LIMIT) // Segment time im micro seconds int32_t segment_time_us = LROUND(1000000.0f / inverse_secs); #endif @@ -2096,14 +2095,14 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Buffer is draining so add extra time. The amount of time added increases if the buffer is still emptied more. const int32_t nst = segment_time_us + LROUND(2 * time_diff / moves_queued); inverse_secs = 1000000.0f / nst; - #if defined(XY_FREQUENCY_LIMIT) || HAS_SPI_LCD + #if defined(XY_FREQUENCY_LIMIT) || HAS_WIRED_LCD segment_time_us = nst; #endif } } #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD // Protect the access to the position. const bool was_enabled = stepper.suspend(); @@ -2243,7 +2242,6 @@ bool Planner::_populate_block(block_t * const block, bool split_move, #define MAX_E_JERK(N) TERN(HAS_LINEAR_E_JERK, max_e_jerk[E_INDEX_N(N)], max_jerk.e) /** - * * Use LIN_ADVANCE for blocks if all these are true: * * esteps : This is a print move, because we checked for A, B, C steps before. @@ -3029,7 +3027,7 @@ void Planner::set_max_jerk(const AxisEnum axis, float targetValue) { #endif } -#if HAS_SPI_LCD +#if HAS_WIRED_LCD uint16_t Planner::block_buffer_runtime() { #ifdef __AVR__ diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index 660d9ad5aa1e..c4e11490b161 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -218,7 +218,7 @@ typedef struct block_t { uint8_t valve_pressure, e_to_p_pressure; #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD uint32_t segment_time_us; #endif @@ -438,7 +438,7 @@ class Planner { static uint8_t g_uc_extruder_last_move[EXTRUDERS]; #endif - #if HAS_SPI_LCD + #if HAS_WIRED_LCD volatile static uint32_t block_buffer_runtime_us; // Theoretical block buffer runtime in µs #endif @@ -871,7 +871,7 @@ class Planner { block_buffer_tail = next_block_index(block_buffer_tail); } - #if HAS_SPI_LCD + #if HAS_WIRED_LCD static uint16_t block_buffer_runtime(); static void clear_block_buffer_runtime(); #endif diff --git a/Marlin/src/module/planner_bezier.cpp b/Marlin/src/module/planner_bezier.cpp index 4025b773ed5c..02d878d5f51a 100644 --- a/Marlin/src/module/planner_bezier.cpp +++ b/Marlin/src/module/planner_bezier.cpp @@ -24,7 +24,6 @@ * planner_bezier.cpp * * Compute and buffer movement commands for bezier curves - * */ #include "../inc/MarlinConfig.h" diff --git a/Marlin/src/module/planner_bezier.h b/Marlin/src/module/planner_bezier.h index 41a88b4058fd..72048c42739a 100644 --- a/Marlin/src/module/planner_bezier.h +++ b/Marlin/src/module/planner_bezier.h @@ -25,7 +25,6 @@ * planner_bezier.h * * Compute and buffer movement commands for Bézier curves - * */ #include "../core/types.h" diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index 12b617ec439e..defc22b1fe8e 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -270,7 +270,13 @@ FORCE_INLINE void probe_specific_action(const bool deploy) { #if ENABLED(PAUSE_BEFORE_DEPLOY_STOW) do { #if ENABLED(PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED) - if (deploy == (READ(Z_MIN_PROBE_PIN) == Z_MIN_PROBE_ENDSTOP_INVERTING)) break; + if (deploy == ( + #if HAS_CUSTOM_PROBE_PIN + READ(Z_MIN_PROBE_PIN) == Z_MIN_PROBE_ENDSTOP_INVERTING + #else + READ(Z_MIN_PIN) == Z_MIN_ENDSTOP_INVERTING + #endif + )) break; #endif BUZZ(100, 659); @@ -723,7 +729,6 @@ float Probe::probe_at_point(const float &rx, const float &ry, const ProbePtRaise * when starting up the machine or rebooting the board. * There's no way to know where the nozzle is positioned until * homing has been done - no homing with z-probe without init! - * */ STOW_Z_SERVO(); } diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp index 0fc23099ccb8..3ccd8ffd9185 100644 --- a/Marlin/src/module/settings.cpp +++ b/Marlin/src/module/settings.cpp @@ -33,7 +33,6 @@ * ALSO: Variables in the Store and Retrieve sections must be in the same order. * If a feature is disabled, some data must still be written that, when read, * either sets a Sane Default, or results in No Change to the existing value. - * */ // Change EEPROM version if the structure changes diff --git a/Marlin/src/module/thermistor/thermistor_30.h b/Marlin/src/module/thermistor/thermistor_30.h new file mode 100644 index 000000000000..bc1781b1351c --- /dev/null +++ b/Marlin/src/module/thermistor/thermistor_30.h @@ -0,0 +1,66 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up +// Resistance 100k Ohms at 25deg. C +// Resistance Tolerance + / -1% +// B Value 3950K at 25/50 deg. C +// B Value Tolerance + / - 1% +// Kis3d Silicone Heater 24V 200W/300W with 6mm Precision cast plate (EN AW 5083) +// Temperature setting time 10 min to determine the 12Bit ADC value on the surface. (le3tspeak) +const temp_entry_t temptable_30[] PROGMEM = { + { OV( 1), 938 }, + { OV( 298), 125 }, // 1193 - 125° + { OV( 321), 121 }, // 1285 - 121° + { OV( 348), 117 }, // 1392 - 117° + { OV( 387), 113 }, // 1550 - 113° + { OV( 411), 110 }, // 1644 - 110° + { OV( 445), 106 }, // 1780 - 106° + { OV( 480), 101 }, // 1920 - 101° + { OV( 516), 97 }, // 2064 - 97° + { OV( 553), 92 }, // 2212 - 92° + { OV( 591), 88 }, // 2364 - 88° + { OV( 628), 84 }, // 2512 - 84° + { OV( 665), 79 }, // 2660 - 79° + { OV( 702), 75 }, // 2808 - 75° + { OV( 736), 71 }, // 2945 - 71° + { OV( 770), 67 }, // 3080 - 67° + { OV( 801), 63 }, // 3204 - 63° + { OV( 830), 59 }, // 3320 - 59° + { OV( 857), 55 }, // 3428 - 55° + { OV( 881), 51 }, // 3524 - 51° + { OV( 902), 47 }, // 3611 - 47° + { OV( 922), 42 }, // 3688 - 42° + { OV( 938), 38 }, // 3754 - 38° + { OV( 952), 34 }, // 3811 - 34° + { OV( 964), 29 }, // 3857 - 29° + { OV( 975), 25 }, // 3900 - 25° + { OV( 980), 23 }, // 3920 - 23° + { OV( 991), 17 }, // 3964 - 17° + { OV(1001), 9 }, // Calculated + { OV(1004), 5 }, // Calculated + { OV(1008), 0 }, // Calculated + { OV(1012), -5 }, // Calculated + { OV(1016), -10 }, // Calculated + { OV(1020), -15 } // Calculated +}; diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index 56921c6d186e..0b0419c52034 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -120,6 +120,9 @@ typedef struct { int16_t value, celsius; } temp_entry_t; #if ANY_THERMISTOR_IS(23) // By AluOne #12622. Formerly 22 above. May need calibration/checking. #include "thermistor_23.h" #endif +#if ANY_THERMISTOR_IS(30) // Kis3d Silicone mat 24V 200W/300W with 6mm Precision cast plate (EN AW 5083) + #include "thermistor_30.h" +#endif #if ANY_THERMISTOR_IS(51) // beta25 = 4092 K, R25 = 100 kOhm, Pull-up = 1 kOhm, "EPCOS" #include "thermistor_51.h" #endif diff --git a/Marlin/src/pins/esp32/pins_MRR_ESPE.h b/Marlin/src/pins/esp32/pins_MRR_ESPE.h index 459d00e3e7e2..95f761f26ad9 100644 --- a/Marlin/src/pins/esp32/pins_MRR_ESPE.h +++ b/Marlin/src/pins/esp32/pins_MRR_ESPE.h @@ -124,7 +124,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #define LCD_PINS_RS 13 #define LCD_PINS_ENABLE 17 @@ -152,7 +152,7 @@ #define BTN_EN2 12 #define BTN_ENC 14 -#endif // HAS_GRAPHICAL_LCD +#endif // HAS_MARLINUI_U8GLIB // Hardware serial pins // Add the following to Configuration.h or Configuration_adv.h to assign diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index 2b7909221ec9..002d2ebd9c62 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -389,7 +389,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // // LCD Display output pins @@ -632,4 +632,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h index 13e30b961c1e..df182049f994 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_B300_V1.0.h @@ -27,7 +27,6 @@ * Applies to the following boards: * * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) - * */ #if NOT_TARGET(MCU_LPC1768) @@ -126,7 +125,7 @@ * for the onboard SD card, and a chip select signal is not provided for the remote * SD card. */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P1_31 // EXP1-1 @@ -139,7 +138,7 @@ #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD + #if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER) #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU B300 v1.0" #endif @@ -147,7 +146,7 @@ #error "SDSUPPORT is not supported by the BIQU B300 v1.0 when an LCD controller is used" #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD /** * SD Card Reader diff --git a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h index ed5fd530e04a..bcff04eb85e8 100644 --- a/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h +++ b/Marlin/src/pins/lpc1768/pins_BIQU_BQ111_A4.h @@ -27,7 +27,6 @@ * Applies to the following boards: * * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed) - * */ #if NOT_TARGET(MCU_LPC1768) @@ -97,7 +96,7 @@ * for the onboard SD card, and a chip select signal is not provided for the remote * SD card. */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P1_31 // EXP1-1 @@ -110,7 +109,7 @@ #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3 #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5 - #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && HAS_CHARACTER_LCD + #if BOTH(HAS_MARLINUI_HD44780, REPRAP_DISCOUNT_SMART_CONTROLLER) #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4" #endif @@ -118,7 +117,7 @@ #error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used" #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD /** * SD Card Reader diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h index d5e256066259..0701e45992eb 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_1.h @@ -65,7 +65,16 @@ * by redrawing the screen after SD card accesses. */ -#if HAS_SPI_LCD +#if IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_26 + #endif + + #define SD_DETECT_PIN P1_31 + +#elif HAS_WIRED_LCD + #define BTN_EN1 P3_26 #define BTN_EN2 P3_25 #define BTN_ENC P2_11 @@ -80,7 +89,8 @@ #define DOGLCD_CS P2_06 #define DOGLCD_A0 P0_16 #endif -#endif + +#endif // HAS_WIRED_LCD // // SD Support @@ -89,7 +99,7 @@ // requires jumpers on the SKR V1.1 board as documented here: // https://www.facebook.com/groups/505736576548648/permalink/630639874058317/ #ifndef SDCARD_CONNECTION - #if EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) + #if ANY(MKS_MINI_12864, ENDER2_STOCKDISPLAY, IS_TFTGLCD_PANEL) #define SDCARD_CONNECTION LCD #else #define SDCARD_CONNECTION ONBOARD diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h index a38be0bef765..31373fedff66 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_3.h @@ -214,7 +214,7 @@ #define EXPA2_09_PIN P0_15 #define EXPA2_10_PIN P0_17 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(ANET_FULL_GRAPHICS_LCD) @@ -265,6 +265,14 @@ #error "ADC BUTTONS do not work unmodifed on SKR 1.3, The ADC ports cannot take more than 3.3v." + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS EXPA2_08_PIN + #endif + + #define SD_DETECT_PIN EXPA2_04_PIN + #else // !CR10_STOCKDISPLAY #define LCD_PINS_RS EXPA1_07_PIN @@ -350,7 +358,7 @@ #endif // !CR10_STOCKDISPLAY -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h index fb383ff5fff5..6f9f4bcf6363 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_V1_4.h @@ -232,7 +232,7 @@ * ----- ----- * EXP2 EXP1 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(ANET_FULL_GRAPHICS_LCD) #define LCD_PINS_RS P1_23 @@ -309,6 +309,14 @@ #define XPT2046_Y_OFFSET -285 #endif + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_26 + #endif + + #define SD_DETECT_PIN P1_31 + #else #define BTN_ENC P0_28 // (58) open-drain @@ -371,9 +379,9 @@ #endif // !FYSETC_MINI_12864 - #endif // HAS_GRAPHICAL_LCD + #endif // HAS_MARLINUI_U8GLIB -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if HAS_ADC_BUTTONS #error "ADC BUTTONS do not work unmodifed on SKR 1.4, The ADC ports cannot take more than 3.3v." diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index 9fade582e978..fd902afda42f 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -92,7 +92,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P1_30 // (37) not 5V tolerant #endif diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h index 7d0745aa2d1a..196503c822c5 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SBASE.h @@ -217,7 +217,18 @@ * that the garbage/lines are erased immediately after the SD card accesses are completed. */ -#if HAS_SPI_LCD +#if IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_25 // EXP2.3 + #endif + + #if SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN P0_28 // EXP2.4 + #endif + +#elif HAS_WIRED_LCD + #define BEEPER_PIN P1_31 // EXP1.1 #define BTN_ENC P1_30 // EXP1.2 #define BTN_EN1 P3_26 // EXP2.5 @@ -273,7 +284,7 @@ //#define LCD_SCREEN_ROT_270 #endif -#endif +#endif // HAS_WIRED_LCD /** * Example for trinamic drivers using the J8 connector on MKs Sbase. @@ -361,7 +372,6 @@ * P1_31 - not 5V tolerant - EXP1 * P0_27 - open collector - EXP2 * P0_28 - open collector - EXP2 - * */ /** @@ -376,5 +386,4 @@ * P0_03 - AUX1 * P0_29 - Port -1 * P0_30 - USB - * */ diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index c57c987a7560..d269ecbdc90d 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -235,7 +235,8 @@ * ----- ----- * EXP1 EXP2 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD + #define BEEPER_PIN P1_31 #define BTN_ENC P1_30 @@ -248,6 +249,15 @@ #define LCD_PINS_ENABLE P1_22 #define LCD_PINS_D4 P0_17 + #elif IS_TFTGLCD_PANEL + + #undef BEEPER_PIN + #undef BTN_ENC + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_25 + #endif + #else #define BTN_EN1 P3_25 @@ -321,7 +331,7 @@ #endif // !CR10_STOCKDISPLAY -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index 7b87c95f84a8..c602af1c3028 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -31,7 +31,6 @@ * RAMPS_14_EFF (Hotend, Fan0, Fan1) * RAMPS_14_EEF (Hotend0, Hotend1, Fan) * RAMPS_14_SF (Spindle, Controller Fan) - * */ // Numbers in parentheses () are the corresponding mega2560 pin numbers @@ -326,7 +325,16 @@ #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI) #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK) -#elif HAS_SPI_LCD +#elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_26 // (31) J3-2 & AUX-4 + #endif + + #define SD_DETECT_PIN P1_31 // (49) J3-1 & AUX-3 (NOT 5V tolerant) + #define KILL_PIN P1_22 // (41) J5-4 & AUX-4 + +#elif HAS_WIRED_LCD //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3 //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3 @@ -370,8 +378,9 @@ #define DOGLCD_SCK SCK_PIN #define DOGLCD_MOSI MOSI_PIN - #define STAT_LED_BLUE_PIN P0_26 //(63) may change if cable changes + #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes + #else #if ENABLED(FYSETC_MINI_12864) @@ -420,9 +429,9 @@ //#define LCD_SCREEN_ROT_90 //#define LCD_SCREEN_ROT_180 //#define LCD_SCREEN_ROT_270 - #endif + #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // Ethernet pins diff --git a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h index d798e3873584..6331d6aa7c0a 100644 --- a/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_AZTEEG_X5_MINI.h @@ -109,7 +109,7 @@ // // Display // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) @@ -185,7 +185,7 @@ #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h index de987f95d2e4..76c54c3bba21 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h @@ -16,7 +16,7 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * along with this program. If not, see . * */ #pragma once @@ -193,7 +193,7 @@ #define EXPA1_09_PIN P0_16 #define EXPA1_10_PIN P2_08 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) @@ -238,7 +238,7 @@ #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h index 0314c5049f82..d66ffbe4e5d3 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_MINI.h @@ -141,7 +141,7 @@ // connector are shared with the onboard SD card, and Marlin does not support reading // G-code files from the onboard SD card. // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN P0_27 // EXP2-7 - open drain @@ -160,7 +160,7 @@ #error "SDSUPPORT is not currently supported by the Cohesion3D boards" #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // Ethernet pins diff --git a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h index 9dc870a35396..66604ef6359f 100644 --- a/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h +++ b/Marlin/src/pins/lpc1769/pins_COHESION3D_REMIX.h @@ -206,7 +206,7 @@ #define NEOPIXEL_PIN P1_16 // EXP1-6 => Ethernet pin 6 (top row, 3 from left) #endif -#elif HAS_SPI_LCD +#elif HAS_WIRED_LCD #define BEEPER_PIN P1_31 // EXP1-1 //#define SD_DETECT_PIN P0_27 // EXP2-7 @@ -222,7 +222,7 @@ #define KILL_PIN P2_11 // EXP2-10 -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h index 19c2d5032050..d67549997be5 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN.h @@ -26,7 +26,6 @@ * * The pins diagram can be found and the following URL: * https://github.com/makerbase-mks/MKS-SGen/blob/master/Hardware/MKS%20SGEN%20V1.0_001/MKS%20SGEN%20V1.0_001%20PIN.pdf - * */ #if NOT_TARGET(MCU_LPC1769) diff --git a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h index 3df10a41d769..cbbe8a9416d4 100644 --- a/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h +++ b/Marlin/src/pins/lpc1769/pins_MKS_SGEN_L_V2.h @@ -241,11 +241,21 @@ * ----- ----- * EXP1 EXP2 */ -#if HAS_SPI_LCD +#if IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_25 + #endif + + #define SD_DETECT_PIN P0_27 + +#elif HAS_WIRED_LCD + #define BEEPER_PIN P1_31 #define BTN_ENC P1_30 #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS P1_00 #define BTN_EN1 P0_18 @@ -327,7 +337,7 @@ #endif // !CR10_STOCKDISPLAY -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #ifndef SDCARD_CONNECTION #define SDCARD_CONNECTION ONBOARD diff --git a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h index 696270b417ae..f2811b14abdc 100644 --- a/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_SMOOTHIEBOARD.h @@ -109,18 +109,35 @@ #define STAT_LED_RED_PIN P1_19 #define STAT_LED_BLUE_PIN P1_20 -#elif HAS_SPI_LCD - - /* - The Smoothieboard supports the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with either - a custom cable with breakouts to the pins indicated below or the RRD GLCD Adapter board - found at http://smoothieware.org/rrdglcdadapter - - Other links to information about setting up a display panel with Smoothieboard - http://chibidibidiwah.wdfiles.com/local--files/panel/smoothieboard2sd.jpg - http://smoothieware.org/panel - */ - +#elif HAS_WIRED_LCD + + /** + * SD Support + * + * For the RRD GLCD it CANNOT share the same SPI as the LCD so it must be + * hooked up to the onboard SDCard SPI and use a spare pin for the SDCS. + * Also note that an external SDCard sharing the SPI port with the + * onboard/internal SDCard must be ejected before rebooting as the bootloader + * does not like the external card. NOTE Smoothie will not boot if the external + * sdcard is inserted in the RRD LCD sdcard slot at boot time, it must be + * inserted after it has booted. + */ + #define SD_DETECT_PIN P0_27 // EXP2 Pin 7 (SD_CD, SD_DET) + + #define MISO_PIN P0_08 // EXP2 Pin 1 (PB3, SD_MISO) + #define SCK_PIN P0_07 // EXP2 Pin 2 (SD_SCK) + #define SS_PIN P0_28 // EXP2 Pin 4 (SD_CSEL, SD_CS) + #define MOSI_PIN P0_09 // EXP2 Pin 6 (PB2, SD_MOSI) + + /** + * The Smoothieboard supports the REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER with either + * a custom cable with breakouts to the pins indicated below or the RRD GLCD Adapter board + * found at http://smoothieware.org/rrdglcdadapter + * + * Other links to information about setting up a display panel with Smoothieboard + * http://chibidibidiwah.wdfiles.com/local--files/panel/smoothieboard2sd.jpg + * http://smoothieware.org/panel + */ #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) // EXP1 Pins #define BEEPER_PIN P1_31 // EXP1 Pin 1 @@ -132,24 +149,14 @@ #define BTN_EN2 P3_26 // EXP2 Pin 3 #define BTN_EN1 P3_25 // EXP2 Pin 5 - /* - SD Support - - For the RRD GLCD it CANNOT share the same SPI as the LCD so it must be - hooked up to the onboard SDCard SPI and use a spare pin for the SDCS. - Also note that an external SDCard sharing the SPI port with the - onboard/internal SDCard must be ejected before rebooting as the bootloader - does not like the external card. NOTE Smoothie will not boot if the external - sdcard is inserted in the RRD LCD sdcard slot at boot time, it must be - inserted after it has booted. - */ - - #define MISO_PIN P0_08 // EXP2 Pin 1 (PB3, SD_MISO) - #define SCK_PIN P0_07 // EXP2 Pin 2 (SD_SCK) - #define SS_PIN P0_28 // EXP2 Pin 4 (SD_CSEL, SD_CS) - #define MOSI_PIN P0_09 // EXP2 Pin 6 (PB2, SD_MOSI) + #elif IS_TFTGLCD_PANEL + #define SD_DETECT_PIN P0_27 // EXP2 Pin 7 (SD_CD, SD_DET) + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS P3_26 // EXP2 Pin 3 + #endif + #else #error "Marlin's Smoothieboard support cannot drive your LCD." #endif diff --git a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h index 75c899fe01d1..a0174f260298 100644 --- a/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h +++ b/Marlin/src/pins/lpc1769/pins_TH3D_EZBOARD.h @@ -166,7 +166,6 @@ * * A remote SD card is currently not supported because the pins routed to the EXP2 * connector are shared with the onboard SD card. - * */ #if ENABLED(CR10_STOCKDISPLAY) @@ -178,6 +177,6 @@ #define LCD_PINS_ENABLE P0_18 #define LCD_PINS_D4 P0_15 #define KILL_PIN P2_11 -#elif HAS_SPI_LCD +#elif HAS_WIRED_LCD #error "Only the CR10_STOCKDISPLAY is supported with TH3D EZBoard." #endif diff --git a/Marlin/src/pins/mega/pins_GT2560_REV_A.h b/Marlin/src/pins/mega/pins_GT2560_REV_A.h index 2fb112f5afca..2fe9a43ba136 100644 --- a/Marlin/src/pins/mega/pins_GT2560_REV_A.h +++ b/Marlin/src/pins/mega/pins_GT2560_REV_A.h @@ -105,7 +105,7 @@ #define SUICIDE_PIN 54 // Must be enabled at startup to keep power flowing #define KILL_PIN -1 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN 18 @@ -148,4 +148,4 @@ #endif // !NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h index d21cd22e53bd..e30a65b90e1b 100644 --- a/Marlin/src/pins/mega/pins_HJC2560C_REV2.h +++ b/Marlin/src/pins/mega/pins_HJC2560C_REV2.h @@ -123,7 +123,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN 18 @@ -170,4 +170,4 @@ #endif // !NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_INTAMSYS40.h b/Marlin/src/pins/mega/pins_INTAMSYS40.h index 3dc9c9a6bed3..be5f461dda38 100644 --- a/Marlin/src/pins/mega/pins_INTAMSYS40.h +++ b/Marlin/src/pins/mega/pins_INTAMSYS40.h @@ -122,7 +122,7 @@ #define BEEPER_PIN 18 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 20 #define LCD_PINS_ENABLE 30 #define LCD_PINS_D4 14 @@ -137,7 +137,6 @@ ///////////////////// SPARE HEADERS ////////////// /** - * * J25 * 1 D54 * 2 D55 diff --git a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h index 9005ac2acfa1..ff7cf1571465 100644 --- a/Marlin/src/pins/mega/pins_MEGATRONICS_2.h +++ b/Marlin/src/pins/mega/pins_MEGATRONICS_2.h @@ -130,7 +130,7 @@ // #define BEEPER_PIN 64 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 14 #define LCD_PINS_ENABLE 15 @@ -152,4 +152,4 @@ #define SHIFT_EN 17 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h index 74a45eac017f..963911ec5d70 100644 --- a/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h +++ b/Marlin/src/pins/mega/pins_MIGHTYBOARD_REVE.h @@ -212,7 +212,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) @@ -260,7 +260,7 @@ #define BTN_CENTER 15 // J0 #define BTN_ENC BTN_CENTER -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Card diff --git a/Marlin/src/pins/mega/pins_MINITRONICS.h b/Marlin/src/pins/mega/pins_MINITRONICS.h index 9cb4401da90c..bbe746461eca 100644 --- a/Marlin/src/pins/mega/pins_MINITRONICS.h +++ b/Marlin/src/pins/mega/pins_MINITRONICS.h @@ -29,7 +29,6 @@ * Rev B 2 JAN 2017 * * Added pin definitions for M3, M4 & M5 spindle control commands - * */ #if NOT_TARGET(__AVR_ATmega1281__) diff --git a/Marlin/src/pins/mega/pins_OVERLORD.h b/Marlin/src/pins/mega/pins_OVERLORD.h index 9589fa585189..045c1bc0fa6c 100644 --- a/Marlin/src/pins/mega/pins_OVERLORD.h +++ b/Marlin/src/pins/mega/pins_OVERLORD.h @@ -119,7 +119,7 @@ // // LCD / Controller // -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB // OVERLORD OLED pins #define LCD_PINS_RS 20 #define LCD_PINS_D5 21 diff --git a/Marlin/src/pins/mega/pins_PICA.h b/Marlin/src/pins/mega/pins_PICA.h index acaeefe17861..ff4d3e834d05 100644 --- a/Marlin/src/pins/mega/pins_PICA.h +++ b/Marlin/src/pins/mega/pins_PICA.h @@ -137,7 +137,7 @@ // #define BEEPER_PIN 29 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 33 #define LCD_PINS_ENABLE 30 #define LCD_PINS_D4 35 diff --git a/Marlin/src/pins/mega/pins_SILVER_GATE.h b/Marlin/src/pins/mega/pins_SILVER_GATE.h index e339b0472ac4..41cbe5e0e078 100644 --- a/Marlin/src/pins/mega/pins_SILVER_GATE.h +++ b/Marlin/src/pins/mega/pins_SILVER_GATE.h @@ -72,7 +72,7 @@ #define HEATER_BED_PIN 8 #define TEMP_BED_PIN 6 -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #if ENABLED(U8GLIB_ST7920) // SPI GLCD 12864 ST7920 #define LCD_PINS_RS 30 #define LCD_PINS_ENABLE 20 diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 0ccdadadde4c..3ec4e1a34b9b 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -1227,7 +1227,7 @@ #define LCD_PINS_D4 -1 #endif -#if HAS_CHARACTER_LCD || TOUCH_UI_ULTIPANEL +#if HAS_MARLINUI_HD44780 || TOUCH_UI_ULTIPANEL #ifndef LCD_PINS_D5 #define LCD_PINS_D5 -1 #endif @@ -1597,7 +1597,7 @@ #define Z4_MS3_PIN -1 #endif -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #if !defined(ST7920_DELAY_1) && defined(BOARD_ST7920_DELAY_1) #define ST7920_DELAY_1 BOARD_ST7920_DELAY_1 #endif diff --git a/Marlin/src/pins/pinsDebug.h b/Marlin/src/pins/pinsDebug.h index 06a8144291ca..5f153cfa2b0f 100644 --- a/Marlin/src/pins/pinsDebug.h +++ b/Marlin/src/pins/pinsDebug.h @@ -31,7 +31,6 @@ * * Both passes use the same pin list. The list contains two macro names. The * actual macro definitions are changed depending on which pass is being done. - * */ // first pass - put the name strings into FLASH diff --git a/Marlin/src/pins/pinsDebug_list.h b/Marlin/src/pins/pinsDebug_list.h index ac15a3c9bae2..704f2a487fb1 100644 --- a/Marlin/src/pins/pinsDebug_list.h +++ b/Marlin/src/pins/pinsDebug_list.h @@ -261,6 +261,9 @@ #if defined(TMC_SW_SCK) && TMC_SW_SCK >= 0 REPORT_NAME_DIGITAL(__LINE__, TMC_SW_SCK) #endif +#if defined(TFTGLCD_CS) && TFTGLCD_CS >= 0 + REPORT_NAME_DIGITAL(__LINE__, TFTGLCD_CS) +#endif #if PIN_EXISTS(E_MUX0) REPORT_NAME_DIGITAL(__LINE__, E_MUX0_PIN) #endif diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index 21e43bb3618b..2ea15c97d332 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -160,7 +160,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL +#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL #define KILL_PIN 32 @@ -188,4 +188,4 @@ #define SD_DETECT_PIN 15 #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h index 39ba3ddf04c5..4a1bf70b6eaa 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RETRO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RETRO.h @@ -166,7 +166,7 @@ // // LCD / Controller // -#if ANY(HAS_SPI_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) +#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) #define KILL_PIN 32 @@ -196,4 +196,4 @@ #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE -#endif // HAS_SPI_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE +#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL || TOUCH_UI_FTDI_EVE diff --git a/Marlin/src/pins/rambo/pins_MINIRAMBO.h b/Marlin/src/pins/rambo/pins_MINIRAMBO.h index c41a6ac17966..6314bc07b8c0 100644 --- a/Marlin/src/pins/rambo/pins_MINIRAMBO.h +++ b/Marlin/src/pins/rambo/pins_MINIRAMBO.h @@ -141,7 +141,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL +#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL #if !MB(MINIRAMBO_10A) #define KILL_PIN 32 @@ -189,4 +189,4 @@ #endif // ULTIPANEL || TOUCH_UI_ULTIPANEL -#endif // HAS_SPI_LCD || TOUCH_UI_ULTIPANEL +#endif // HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL diff --git a/Marlin/src/pins/rambo/pins_RAMBO.h b/Marlin/src/pins/rambo/pins_RAMBO.h index 2109eb615b2e..735852b2ff79 100644 --- a/Marlin/src/pins/rambo/pins_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_RAMBO.h @@ -183,7 +183,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD || TOUCH_UI_ULTIPANEL +#if HAS_WIRED_LCD || TOUCH_UI_ULTIPANEL #define KILL_PIN 80 @@ -249,4 +249,4 @@ #endif // !NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_3DRAG.h b/Marlin/src/pins/ramps/pins_3DRAG.h index 1989a1657fdb..f0057e1fc980 100644 --- a/Marlin/src/pins/ramps/pins_3DRAG.h +++ b/Marlin/src/pins/ramps/pins_3DRAG.h @@ -106,7 +106,7 @@ #define BEEPER_PIN 33 -#endif // HAS_SPI_LCD && NEWPANEL +#endif // ULTRA_LCD && NEWPANEL /** * M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h index 3fa738e32215..87d24890c99c 100644 --- a/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h +++ b/Marlin/src/pins/ramps/pins_DUPLICATOR_I3_PLUS.h @@ -87,7 +87,7 @@ // // LCDs and Controllers // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(ZONESTAR_LCD) #define LCD_PINS_RS 2 #define LCD_PINS_ENABLE 36 diff --git a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h index 362ff7ae438a..75a219c177de 100644 --- a/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h +++ b/Marlin/src/pins/ramps/pins_FORMBOT_TREX2PLUS.h @@ -197,7 +197,7 @@ #define LCD_PINS_D7 29 #endif -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(200) #endif diff --git a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h index 3f7575497cb3..3fa3cc9e8c9c 100644 --- a/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h +++ b/Marlin/src/pins/ramps/pins_FYSETC_F6_13.h @@ -261,7 +261,7 @@ #define NEOPIXEL_PIN 25 #endif - #elif HAS_GRAPHICAL_LCD + #elif HAS_MARLINUI_U8GLIB #define LCD_PINS_RS 16 #define LCD_PINS_ENABLE 17 diff --git a/Marlin/src/pins/ramps/pins_K8800.h b/Marlin/src/pins/ramps/pins_K8800.h index f526b9b2269f..7e8c245a4158 100644 --- a/Marlin/src/pins/ramps/pins_K8800.h +++ b/Marlin/src/pins/ramps/pins_K8800.h @@ -95,7 +95,7 @@ // #define BEEPER_PIN 6 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_SDSS 53 @@ -119,4 +119,4 @@ #define BTN_ENC 23 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index b2d394e61d2c..de56d2b59d9b 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -430,7 +430,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // // LCD Display output pins @@ -450,6 +450,10 @@ #define LCD_PINS_D6 44 #define LCD_PINS_D7 64 + #elif ENABLED(TFTGLCD_PANEL_SPI) + + #define TFTGLCD_CS 33 + #else #if ENABLED(CR10_STOCKDISPLAY) @@ -682,6 +686,10 @@ // Pins only defined for RAMPS_SMART currently + #elif IS_TFTGLCD_PANEL + + #define SD_DETECT_PIN 49 + #else // Beeper on AUX-4 @@ -706,7 +714,7 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_KEYPAD) && DISABLED(ADC_KEYPAD) #define SHIFT_OUT 40 diff --git a/Marlin/src/pins/ramps/pins_RAMPS_13.h b/Marlin/src/pins/ramps/pins_RAMPS_13.h index 032dd79c234d..6e7c8cbab592 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_13.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_13.h @@ -31,7 +31,6 @@ * RAMPS_13_EFF (Extruder, Fan, Fan) * RAMPS_13_EEF (Extruder, Extruder, Fan) * RAMPS_13_SF (Spindle, Controller Fan) - * */ #ifndef BOARD_INFO_NAME diff --git a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h index 19209f1e2363..9908d9494f34 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS_PLUS.h @@ -35,7 +35,6 @@ * RAMPS_PLUS_EFF (Extruder, Fan, Fan) * RAMPS_PLUS_EEF (Extruder, Extruder, Fan) * RAMPS_PLUS_SF (Spindle, Controller Fan) - * */ #if NOT_TARGET(__AVR_ATmega1280__, __AVR_ATmega2560__) diff --git a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h index 412aa2290223..1c2cb609579e 100644 --- a/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h +++ b/Marlin/src/pins/ramps/pins_TRIGORILLA_14.h @@ -128,7 +128,7 @@ // AnyCubic made the following changes to 1.1.0-RC8 // If these are appropriate for your LCD let us know. // -#if 0 && HAS_SPI_LCD +#if 0 && HAS_WIRED_LCD // LCD Display output pins #if BOTH(NEWPANEL, PANEL_ONE) @@ -154,4 +154,4 @@ #define DOGLCD_A0 42 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/ramps/pins_TT_OSCAR.h b/Marlin/src/pins/ramps/pins_TT_OSCAR.h index 33b2a60d641e..1568288e69bc 100644 --- a/Marlin/src/pins/ramps/pins_TT_OSCAR.h +++ b/Marlin/src/pins/ramps/pins_TT_OSCAR.h @@ -271,7 +271,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // // LCD Display output pins diff --git a/Marlin/src/pins/ramps/pins_ULTIMAKER.h b/Marlin/src/pins/ramps/pins_ULTIMAKER.h index 2dfde42bac69..597a37bdbc8b 100644 --- a/Marlin/src/pins/ramps/pins_ULTIMAKER.h +++ b/Marlin/src/pins/ramps/pins_ULTIMAKER.h @@ -119,7 +119,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN 18 @@ -158,7 +158,7 @@ #endif // !NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/sam/pins_ADSK.h b/Marlin/src/pins/sam/pins_ADSK.h index c4d7c079407c..b0e171cf1716 100644 --- a/Marlin/src/pins/sam/pins_ADSK.h +++ b/Marlin/src/pins/sam/pins_ADSK.h @@ -204,5 +204,4 @@ A stepper for E0 extruder * * Standard ethernet pairs: 1&2, 3&6, 4&5, 7&8 * Use CAT7 cable to have all pairs shielded - * */ diff --git a/Marlin/src/pins/sam/pins_ARCHIM1.h b/Marlin/src/pins/sam/pins_ARCHIM1.h index 8c54cad3b6b8..6e3768c663bc 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM1.h +++ b/Marlin/src/pins/sam/pins_ARCHIM1.h @@ -181,7 +181,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN 23 // D24 PA15_CTS1 #define LCD_PINS_RS 17 // D17 PA12_RXD1 #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 @@ -198,4 +198,4 @@ #define BTN_EN2 13 // D13 PB27_TIOB0 #define BTN_ENC 16 // D16 PA13_TXD1 #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_ARCHIM2.h b/Marlin/src/pins/sam/pins_ARCHIM2.h index 3223ac7a0ef4..5a3fe0e4d5c7 100644 --- a/Marlin/src/pins/sam/pins_ARCHIM2.h +++ b/Marlin/src/pins/sam/pins_ARCHIM2.h @@ -237,7 +237,7 @@ // // LCD / Controller // -#if ANY(HAS_SPI_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) +#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE) #define BEEPER_PIN 23 // D24 PA15_CTS1 #define LCD_PINS_RS 17 // D17 PA12_RXD1 #define LCD_PINS_ENABLE 24 // D23 PA14_RTS1 diff --git a/Marlin/src/pins/sam/pins_DUE3DOM.h b/Marlin/src/pins/sam/pins_DUE3DOM.h index b7c01f843ae3..cd4033aa6f1f 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM.h @@ -113,7 +113,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 42 #define LCD_PINS_ENABLE 43 @@ -168,4 +168,4 @@ #define BEEPER_PIN -1 #endif // SPARK_FULL_GRAPHICS -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index 7f559f11903f..5f9ad48a08c4 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -105,7 +105,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 42 #define LCD_PINS_ENABLE 43 @@ -171,4 +171,4 @@ #define DOGLCD_CS 45 #endif // SPARK_FULL_GRAPHICS -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h index 2cfbecc08646..22edb7021302 100644 --- a/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h +++ b/Marlin/src/pins/sam/pins_PRINTRBOARD_G2.h @@ -170,5 +170,4 @@ * None of these are in the arduino_due_x variant so digitalWrite and digitalRead can't be used on them. * * They can be accessed via FASTIO functions WRITE, READ, OUT_WRITE, OUTPUT, ... - * */ diff --git a/Marlin/src/pins/sam/pins_RADDS.h b/Marlin/src/pins/sam/pins_RADDS.h index c82c7e9c5399..60fe3512378e 100644 --- a/Marlin/src/pins/sam/pins_RADDS.h +++ b/Marlin/src/pins/sam/pins_RADDS.h @@ -226,7 +226,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(RADDS_DISPLAY) @@ -287,7 +287,7 @@ #endif // SPARK_FULL_GRAPHICS -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #ifndef SDSS #define SDSS 4 diff --git a/Marlin/src/pins/sam/pins_RAMPS_DUO.h b/Marlin/src/pins/sam/pins_RAMPS_DUO.h index 94f1b50776a9..bfc3968ffac2 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_DUO.h +++ b/Marlin/src/pins/sam/pins_RAMPS_DUO.h @@ -76,7 +76,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if BOTH(NEWPANEL, PANEL_ONE) #undef LCD_PINS_D4 @@ -129,4 +129,4 @@ #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h index 5662590e269f..ee525eefaa56 100644 --- a/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h +++ b/Marlin/src/pins/sam/pins_RAMPS_FD_V1.h @@ -139,7 +139,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // ramps-fd lcd adaptor #define BEEPER_PIN 37 @@ -203,7 +203,7 @@ #define DOGLCD_MISO 74 // MISO_PIN #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if HAS_TMC_UART /** diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h index 524c14d198f8..b9e61fb27c53 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_11.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_11.h @@ -200,7 +200,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BEEPER_PIN 62 @@ -271,4 +271,4 @@ #define BTN_ENC 40 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h index 187473b3dd43..dc0c1279954b 100644 --- a/Marlin/src/pins/sam/pins_RURAMPS4D_13.h +++ b/Marlin/src/pins/sam/pins_RURAMPS4D_13.h @@ -186,7 +186,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ANY(RADDS_DISPLAY, REPRAP_DISCOUNT_SMART_CONTROLLER, REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER) #define BEEPER_PIN 62 @@ -253,4 +253,4 @@ #define BTN_ENC 40 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/samd/pins_RAMPS_144.h b/Marlin/src/pins/samd/pins_RAMPS_144.h index 388ac1a3312e..6076be07e9d4 100644 --- a/Marlin/src/pins/samd/pins_RAMPS_144.h +++ b/Marlin/src/pins/samd/pins_RAMPS_144.h @@ -287,7 +287,7 @@ // LCDs and Controllers // ////////////////////////// -#if HAS_SPI_LCD +#if HAS_WIRED_LCD // // LCD Display output pins @@ -594,7 +594,7 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Support diff --git a/Marlin/src/pins/sanguino/pins_ANET_10.h b/Marlin/src/pins/sanguino/pins_ANET_10.h index 3978198eef86..74692a21a390 100644 --- a/Marlin/src/pins/sanguino/pins_ANET_10.h +++ b/Marlin/src/pins/sanguino/pins_ANET_10.h @@ -30,7 +30,6 @@ * * 1) no longer uses Sanguino files to define some of the pins * 2) added pointers to useable Arduino IDE extensions - * */ /** @@ -48,7 +47,6 @@ * "Anet V1.0 (Optiboot)" frees up another 3K of FLASH. You'll need to burn * a new bootloader to the board to be able to automatically download a * compiled image. - * */ /** @@ -66,7 +64,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ /** @@ -152,7 +149,7 @@ * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_SDSS 28 #if ENABLED(ADC_KEYPAD) #define SERVO0_PIN 27 // free for BLTouch/3D-Touch diff --git a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h index e927aac124db..29905c108954 100644 --- a/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h +++ b/Marlin/src/pins/sanguino/pins_GEN3_MONOLITHIC.h @@ -29,7 +29,6 @@ * Rev B 26 DEC 2016 * * added pointer to a current Arduino IDE extension - * */ /** @@ -47,7 +46,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__) diff --git a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h index 1961446e2274..33fc233f7ab1 100644 --- a/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h +++ b/Marlin/src/pins/sanguino/pins_GEN3_PLUS.h @@ -29,7 +29,6 @@ * Rev B 26 DEC 2016 * * added pointer to a current Arduino IDE extension - * */ /** @@ -47,7 +46,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the SANGUINO board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__) diff --git a/Marlin/src/pins/sanguino/pins_GEN6.h b/Marlin/src/pins/sanguino/pins_GEN6.h index 98eb616892e6..bfca8e90d9cc 100644 --- a/Marlin/src/pins/sanguino/pins_GEN6.h +++ b/Marlin/src/pins/sanguino/pins_GEN6.h @@ -31,7 +31,6 @@ * 1) added pointer to a current Arduino IDE extension * 2) added support for M3, M4 & M5 spindle control commands * 3) added case light pin definition - * */ /** @@ -49,7 +48,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__) diff --git a/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h b/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h index a40c2ec15fde..9c635706202c 100644 --- a/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h +++ b/Marlin/src/pins/sanguino/pins_GEN6_DELUXE.h @@ -29,7 +29,6 @@ * Rev B 26 DEC 2016 * * added pointer to a current Arduino IDE extension - * */ /** @@ -47,7 +46,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the SANGUINO board and then select the CPU. - * */ diff --git a/Marlin/src/pins/sanguino/pins_GEN7_12.h b/Marlin/src/pins/sanguino/pins_GEN7_12.h index ed550624f789..9db7d7214a5b 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_12.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_12.h @@ -31,7 +31,6 @@ * 1) added pointer to a current Arduino IDE extension * 2) added support for M3, M4 & M5 spindle control commands * 3) added case light pin definition - * */ /** @@ -49,7 +48,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) diff --git a/Marlin/src/pins/sanguino/pins_GEN7_13.h b/Marlin/src/pins/sanguino/pins_GEN7_13.h index 6743c8cf75fc..55881aaff58e 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_13.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_13.h @@ -29,7 +29,6 @@ * Rev B 26 DEC 2016 * * added pointer to a current Arduino IDE extension - * */ /** @@ -47,7 +46,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #define BOARD_INFO_NAME "Gen7 v1.3" diff --git a/Marlin/src/pins/sanguino/pins_GEN7_14.h b/Marlin/src/pins/sanguino/pins_GEN7_14.h index 752fe3074f07..66dba533e988 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_14.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_14.h @@ -31,7 +31,6 @@ * 1) added pointer to a current Arduino IDE extension * 2) added support for M3, M4 & M5 spindle control commands * 3) added case light pin definition - * */ /** @@ -49,7 +48,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) diff --git a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h index 1a19c33deac4..0c4871fb27d5 100644 --- a/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h +++ b/Marlin/src/pins/sanguino/pins_GEN7_CUSTOM.h @@ -34,7 +34,6 @@ * 1) added pointer to a current Arduino IDE extension * 2) added support for M3, M4 & M5 spindle control commands * 3) added case light pin definition - * */ /** @@ -52,7 +51,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) diff --git a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h index 4817ce804349..9f406c1f7856 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_CREALITY.h @@ -36,7 +36,7 @@ #define BOARD_INFO_NAME "Melzi (Creality)" // Alter timing for graphical display -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif diff --git a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h index 8128fb86e664..5014620c6b81 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_MALYAN.h @@ -28,7 +28,7 @@ #define BOARD_INFO_NAME "Melzi (Malyan)" // Alter timing for graphical display -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif diff --git a/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h b/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h index 9e433f19c424..f87894103771 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_TRONXY.h @@ -27,7 +27,7 @@ #define BOARD_INFO_NAME "Melzi (Tronxy)" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(0) #endif diff --git a/Marlin/src/pins/sanguino/pins_MELZI_V2.h b/Marlin/src/pins/sanguino/pins_MELZI_V2.h index 1cdf51117fed..275498d55813 100644 --- a/Marlin/src/pins/sanguino/pins_MELZI_V2.h +++ b/Marlin/src/pins/sanguino/pins_MELZI_V2.h @@ -24,7 +24,7 @@ #define BOARD_INFO_NAME "Melzi V2" -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(0) #endif diff --git a/Marlin/src/pins/sanguino/pins_OMCA.h b/Marlin/src/pins/sanguino/pins_OMCA.h index d9f43995d481..7f18283d1c54 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA.h +++ b/Marlin/src/pins/sanguino/pins_OMCA.h @@ -56,7 +56,6 @@ * Rev B 26 DEC 2016 * * added pointer to a current Arduino IDE extension - * */ /** @@ -74,7 +73,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__) diff --git a/Marlin/src/pins/sanguino/pins_OMCA_A.h b/Marlin/src/pins/sanguino/pins_OMCA_A.h index 1b4c9b68b215..770732051900 100644 --- a/Marlin/src/pins/sanguino/pins_OMCA_A.h +++ b/Marlin/src/pins/sanguino/pins_OMCA_A.h @@ -48,14 +48,12 @@ * PWM (D 13) PD5 19| |22 PC0 (D 16) SCL * PWM (D 14) PD6 20| |21 PD7 (D 15) PWM * +--------+ - * */ /** * Rev B 26 DEC 2016 * * added pointer to a current Arduino IDE extension - * */ /** @@ -73,7 +71,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644__) diff --git a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h index 4b4fb1d70ed7..438d49d615c8 100644 --- a/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h +++ b/Marlin/src/pins/sanguino/pins_SANGUINOLOLU_11.h @@ -31,7 +31,6 @@ * 1) added pointer to a current Arduino IDE extension * 2) added support for M3, M4 & M5 spindle control commands * 3) added case light pin definition - * */ /** @@ -49,7 +48,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega1284P__) @@ -154,11 +152,11 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define SD_DETECT_PIN -1 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #if ENABLED(LCD_FOR_MELZI) @@ -290,7 +288,7 @@ #define BTN_EN2 10 #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // M3/M4/M5 - Spindle/Laser Control diff --git a/Marlin/src/pins/sanguino/pins_SETHI.h b/Marlin/src/pins/sanguino/pins_SETHI.h index e0a0604619ce..dc2133e441dc 100644 --- a/Marlin/src/pins/sanguino/pins_SETHI.h +++ b/Marlin/src/pins/sanguino/pins_SETHI.h @@ -47,7 +47,6 @@ * Just use the above JSON URL instead of Sparkfun's JSON. * * Once installed select the Sanguino board and then select the CPU. - * */ #if NOT_TARGET(__AVR_ATmega644P__, __AVR_ATmega644__, __AVR_ATmega1284P__) diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h index a3cb987fff0b..63b97b666faf 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_E3_DIP.h @@ -171,7 +171,7 @@ * EXP1 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) @@ -225,7 +225,7 @@ #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and MKS_LCD12864 are currently supported on the BIGTREE_SKR_E3_DIP." #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) @@ -257,7 +257,6 @@ * EXP1-8 ----------- EXP1-3 * SPI1-1 ----------- EXP1-1 * EXP1-10 ----------- EXP1-7 - * */ #define CLCD_SPI_BUS 1 // SPI1 connector @@ -279,9 +278,7 @@ #if SD_CONNECTION_IS(ONBOARD) #define SD_DETECT_PIN PC4 -#endif - -#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD) +#elif SD_CONNECTION_IS(LCD) && BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) #define SD_DETECT_PIN PA15 #define SS_PIN PA10 #elif SD_CONNECTION_IS(CUSTOM_CABLE) diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h index 4f03d3bbd717..50257f4f4608 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_E3_common.h @@ -129,7 +129,7 @@ #define EXP1_3 PB7 #endif -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(CR10_STOCKDISPLAY) @@ -169,11 +169,50 @@ #define FORCE_SOFT_SPI #define LCD_BACKLIGHT_PIN -1 + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + + #error "CAUTION! TFTGLCD_PANEL_SPI requires wiring modifications. See 'pins_BTT_SKR_MINI_E3_common.h' for details. Comment out this line to continue." + + /** + * TFTGLCD_PANEL_SPI display pinout + * + * Board Display + * _____ _____ + * 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) + * (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) GLCD_CS | 3 4 | SD_CS (PA10) + * (FREE) PB9 | 5 6 | PA10 (SD_CS) (FREE) | 5 6 | MOSI (SPI1-MOSI) + * RESET | 7 8 | PA9 (MOD_RESET) (PB5) SD_DET | 7 8 | (FREE) + * (BEEPER) PB6 | 9 10| PB5 (SD_DET) GND | 9 10| 5V + * ----- ----- + * EXP1 EXP1 + * + * Needs custom cable: + * + * Board Adapter Display + * _________ + * EXP1-1 ----------- EXP1-10 + * EXP1-2 ----------- EXP1-9 + * SPI1-4 ----------- EXP1-6 + * EXP1-4 ----------- FREE + * SPI1-3 ----------- EXP1-2 + * EXP1-6 ----------- EXP1-4 + * EXP1-7 ----------- FREE + * EXP1-8 ----------- EXP1-3 + * SPI1-1 ----------- EXP1-1 + * EXP1-10 ----------- EXP1-7 + */ + + #define TFTGLCD_CS PA9 + + #endif + #else - #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, and MKS_MINI_12864 are currently supported on the BIGTREE_SKR_MINI_E3." + #error "Only CR10_STOCKDISPLAY, ZONESTAR_LCD, ENDER2_STOCKDISPLAY, MKS_MINI_12864, and TFTGLCD_PANEL_(SPI|I2C) are currently supported on the BIGTREE_SKR_MINI_E3." #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) @@ -185,7 +224,7 @@ * _____ _____ * 5V | 1 2 | GND (SPI1-MISO) MISO | 1 2 | SCK (SPI1-SCK) * (FREE) PB7 | 3 4 | PB8 (LCD_CS) (PA9) MOD_RESET | 3 4 | SD_CS (PA10) - * (FREE) PB9 | 5 6 PA10 (SD_CS) (PB8) LCD_CS | 5 6 MOSI (SPI1-MOSI) + * (FREE) PB9 | 5 6 | PA10 (SD_CS) (PB8) LCD_CS | 5 6 | MOSI (SPI1-MOSI) * RESET | 7 8 | PA9 (MOD_RESET) (PB5) SD_DET | 7 8 | RESET * (BEEPER) PB6 | 9 10| PB5 (SD_DET) GND | 9 10| 5V * ----- ----- @@ -205,7 +244,6 @@ * EXP1-8 ----------- EXP1-3 * SPI1-1 ----------- EXP1-1 * EXP1-10 ----------- EXP1-7 - * */ #define CLCD_SPI_BUS 1 // SPI1 connector @@ -227,9 +265,7 @@ #if SD_CONNECTION_IS(ONBOARD) #define SD_DETECT_PIN PC4 -#endif - -#if BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) && SD_CONNECTION_IS(LCD) +#elif SD_CONNECTION_IS(LCD) && (BOTH(TOUCH_UI_FTDI_EVE, LCD_FYSETC_TFT81050) || IS_TFTGLCD_PANEL) #define SD_DETECT_PIN PB5 #define SS_PIN PA10 #elif SD_CONNECTION_IS(CUSTOM_CABLE) diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h index aaecc054421a..47fff4467c72 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_MINI_V1_1.h @@ -110,7 +110,7 @@ * EXP2 EXP1 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC10 #define BTN_ENC PC11 @@ -123,6 +123,17 @@ #define LCD_PINS_ENABLE PC14 #define LCD_PINS_D4 PB7 + #elif IS_TFTGLCD_PANEL + + #undef BEEPER_PIN + #undef BTN_ENC + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS PD2 + #endif + + #define SD_DETECT_PIN PB9 + #else #define LCD_PINS_RS PC12 @@ -172,7 +183,7 @@ #endif // !FYSETC_MINI_12864 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif @@ -186,7 +197,7 @@ #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Card diff --git a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h index e67a6d3b1bc5..66930a2ea5a6 100644 --- a/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h +++ b/Marlin/src/pins/stm32f1/pins_CCROBOT_MEEB_3DP.h @@ -142,7 +142,7 @@ #endif // Alter timing for graphical display -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index 2521359e53dd..3a872db0253e 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -120,7 +120,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS PD1 // 49 // CS chip select /SS chip slave select @@ -281,4 +281,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h index a04d6d261f8c..ebe5964d0588 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_AIO_II.h @@ -139,11 +139,11 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC9 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #define DOGLCD_A0 PA15 #ifdef pins_v2_20190128 diff --git a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h index 24aa83d9482f..de5ea45d44e8 100644 --- a/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h +++ b/Marlin/src/pins/stm32f1/pins_FYSETC_CHEETAH.h @@ -130,10 +130,10 @@ * Note: Pin 4 on the Cheetah board is assigned to an I/O, it is assigned to RESET on the Ender-3 board. */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC9 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #define DOGLCD_A0 PB14 #define DOGLCD_CS PB12 #define DOGLCD_SCK PB13 diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h index b6520d563c38..ca25c45a7bba 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI.h @@ -135,7 +135,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // @@ -158,7 +158,7 @@ //#define LCD_UART_RX PD9 #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -170,7 +170,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h index 7dbee215a0d6..02fd3bcae721 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_MINI_A30.h @@ -135,7 +135,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // @@ -166,7 +166,7 @@ //#define LCD_UART_RX PD9 #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -178,7 +178,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // Beeper diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h index b6520d563c38..ca25c45a7bba 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_PRO_VB.h @@ -135,7 +135,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // @@ -158,7 +158,7 @@ //#define LCD_UART_RX PD9 #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -170,7 +170,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) // diff --git a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h index 7731ffb5e734..fc18263fddf6 100644 --- a/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h +++ b/Marlin/src/pins/stm32f1/pins_GTM32_REV_B.h @@ -135,7 +135,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) @@ -168,7 +168,7 @@ //#define LCD_UART_RX PD9 #endif - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -180,7 +180,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // Beeper diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h index 799477ac1023..47d7118b53d1 100644 --- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h +++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h @@ -124,7 +124,7 @@ #define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1 #define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed -//#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT (broken) +#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT #define FSMC_DMA_DEV DMA2 #define FSMC_DMA_CHANNEL DMA_CH5 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 19f3c3efdac8..a530c89d2cbc 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -320,7 +320,7 @@ #endif -#if HAS_SPI_LCD && !HAS_SPI_TFT +#if HAS_WIRED_LCD && !HAS_SPI_TFT // NON TFT Displays @@ -361,7 +361,7 @@ #endif // !MKS_MINI_12864 -#endif // HAS_SPI_LCD && !HAS_SPI_TFT +#endif // HAS_WIRED_LCD && !HAS_SPI_TFT #define HAS_SPI_FLASH 1 #define SPI_FLASH_SIZE 0x1000000 // 16MB diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h index bbacbf5585d3..015e29bdbe60 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -132,7 +132,7 @@ * ----- ----- ----- * EXP1 EXP2 EXP3 */ -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC1 #define BTN_ENC PC3 @@ -162,7 +162,7 @@ #endif // !MKS_MINI_12864 -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Card diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h index 2bd417951f0a..aa1ccedb3550 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -81,7 +81,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PD2 #define BTN_ENC PB3 #define LCD_PINS_RS PC3 @@ -111,7 +111,7 @@ #endif // !MKS_MINI_12864 - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(125) #endif @@ -123,7 +123,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // Motor current PWM pins #define MOTOR_CURRENT_PWM_XY_PIN PB0 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h index bcb731df71a6..d5318b8e8787 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE3.h @@ -96,7 +96,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC1 #define BTN_ENC PC3 @@ -115,6 +115,12 @@ #define DOGLCD_SCK PB13 #define DOGLCD_MOSI PB15 + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS PB11 + #endif + #else // !MKS_MINI_12864 #define LCD_PINS_D4 PA6 @@ -126,7 +132,7 @@ #endif // !MKS_MINI_12864 -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // SD Card diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index be3b130c858f..4e782649d3f0 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -233,9 +233,6 @@ // // LCD / Controller // -#ifndef BEEPER_PIN - #define BEEPER_PIN PC5 -#endif /** * Note: MKS Robin TFT screens use various TFT controllers. @@ -343,7 +340,7 @@ #endif -#if HAS_SPI_LCD && !HAS_SPI_TFT +#if HAS_WIRED_LCD && !HAS_SPI_TFT // NON TFT Displays @@ -359,6 +356,19 @@ #define DOGLCD_SCK PA5 #define DOGLCD_MOSI PA7 + #elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define PIN_SPI_SCK PA5 + #define PIN_TFT_MISO PA6 + #define PIN_TFT_MOSI PA7 + #define TFTGLCD_CS PE8 + #endif + + #ifndef BEEPER_PIN + #define BEEPER_PIN -1 + #endif + #else // !MKS_MINI_12864 #define LCD_PINS_D4 PE14 @@ -380,7 +390,7 @@ #endif // !MKS_MINI_12864 -#endif // HAS_SPI_LCD && !HAS_SPI_TFT +#endif // HAS_WIRED_LCD && !HAS_SPI_TFT #define HAS_SPI_FLASH 1 #define SPI_FLASH_SIZE 0x1000000 // 16MB @@ -391,6 +401,10 @@ #define W25QXX_SCK_PIN PB13 #endif +#ifndef BEEPER_PIN + #define BEEPER_PIN PC5 +#endif + #if ENABLED(SPEAKER) && BEEPER_PIN == PC5 #error "MKS Robin nano default BEEPER_PIN is not a SPEAKER." #endif diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index e445b8169bb5..12c40b31b374 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -225,7 +225,13 @@ #define BTN_EN2 PG4 #endif -#elif HAS_SPI_LCD +#elif IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS PG5 + #endif + +#elif HAS_WIRED_LCD #define BEEPER_PIN PC5 #define BTN_ENC PG2 @@ -254,6 +260,7 @@ #endif #endif // !MKS_MINI_12864 && !ENDER2_STOCKDISPLAY + #endif #ifndef BOARD_ST7920_DELAY_1 diff --git a/Marlin/src/pins/stm32f1/pins_STM32F1R.h b/Marlin/src/pins/stm32f1/pins_STM32F1R.h index 79f53f02c2f8..cf2ba2c5fa74 100644 --- a/Marlin/src/pins/stm32f1/pins_STM32F1R.h +++ b/Marlin/src/pins/stm32f1/pins_STM32F1R.h @@ -97,7 +97,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS 49 // CS chip select /SS chip slave select @@ -258,4 +258,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h index 468ee5394aae..e74698f89eff 100644 --- a/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_STM3R_MINI.h @@ -112,7 +112,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS 49 // CS chip select /SS chip slave select @@ -282,4 +282,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f4/pins_BEAST.h b/Marlin/src/pins/stm32f4/pins_BEAST.h index d23442ccedbf..268b7b59cd45 100644 --- a/Marlin/src/pins/stm32f4/pins_BEAST.h +++ b/Marlin/src/pins/stm32f4/pins_BEAST.h @@ -120,7 +120,7 @@ // // LCD Pins // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(REPRAPWORLD_GRAPHICAL_LCD) #define LCD_PINS_RS 49 // CS chip select /SS chip slave select @@ -282,4 +282,4 @@ #endif #endif // NEWPANEL -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index 7843572e13a2..c37f6cce0445 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -187,21 +187,22 @@ #define SDSS PA4 /** - * -------------------------------------BTT002 V1.0----------------------------------------------- - * _____ _____ | + * -------------------------------------BTT002 V1.0-------------------------------------------- + * ----- ----- | * PA3 | · · | GND 5V | · · | GND | * NRESET | · · | PC4(SD_DET) (LCD_D7) PE13 | · · | PE12 (LCD_D6) | * (MOSI)PA7 | · · | PB0(BTN_EN2) (LCD_D5) PE11 | · · | PE10 (LCD_D4) | * (SD_SS)PA4 | · · | PC5(BTN_EN1) (LCD_RS) PE8 | · · | PE9 (LCD_EN) | * (SCK)PA5 | · · | PA6(MISO) (BTN_ENC) PB1 | · · | PE7 (BEEPER) | - * ￣￣ ￣￣ | + * ----- ----- | * EXP2 EXP1 | - * --------------------------------------------------------------------------------------------- + * -------------------------------------------------------------------------------------------- */ + // // LCDs and Controllers // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PE7 #define BTN_ENC PB1 @@ -236,7 +237,7 @@ #endif // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -248,7 +249,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD // // RGB LEDs diff --git a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h index ddca719e5322..dc8ce9f2d1b2 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_GTR_V1_0.h @@ -290,9 +290,12 @@ // overriding pins to access. // #if SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN PB10 #define SDSS PB12 + #elif SD_CONNECTION_IS(ONBOARD) + // Instruct the STM32 HAL to override the default SPI pins from the variant.h file #define CUSTOM_SPI_PINS #define SDSS PA4 @@ -301,25 +304,26 @@ #define MISO_PIN PA6 #define MOSI_PIN PA7 #define SD_DETECT_PIN PC4 + #elif SD_CONNECTION_IS(CUSTOM_CABLE) - #define "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" + #error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" #endif /** - * _____ _____ + * ----- ----- * NC | · · | GND 5V | · · | GND * RESET | · · | PB10(SD_DETECT) (LCD_D7) PG5 | · · | PG6 (LCD_D6) * (MOSI)PB15 | · · | PH10(BTN_EN2) (LCD_D5) PG7 | · · | PG8 (LCD_D4) * (SD_SS)PB12 | · · | PD10(BTN_EN1) (LCD_RS) PA8 | · · | PC10 (LCD_EN) * (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA15 | · · | PC11 (BEEPER) - * ￣￣ ￣￣ + * ----- ----- * EXP2 EXP1 */ // // LCDs and Controllers // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC11 #define BTN_ENC PA15 @@ -390,7 +394,7 @@ #endif // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -402,6 +406,6 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #undef TP diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index e9abd66795c0..1cd7e9dd89a2 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -251,9 +251,12 @@ // Must use soft SPI because Marlin's default hardware SPI is tied to LCD's EXP2 // #if SD_CONNECTION_IS(LCD) + #define SD_DETECT_PIN PF12 #define SDSS PB12 + #elif SD_CONNECTION_IS(ONBOARD) + // The SKR Pro's ONBOARD SD interface is on SPI1. // Due to a pull resistor on the clock line, it needs to use SPI Data Mode 3 to // function with Hardware SPI. This is not currently configurable in the HAL, @@ -264,29 +267,38 @@ #define MISO_PIN PA6 #define MOSI_PIN PB5 #define SD_DETECT_PIN PB11 + #elif SD_CONNECTION_IS(CUSTOM_CABLE) - #define "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" + #error "CUSTOM_CABLE is not a supported SDCARD_CONNECTION for this board" #endif /** - * _____ _____ + * ----- ----- * NC | · · | GND 5V | · · | GND * RESET | · · | PF12(SD_DETECT) (LCD_D7) PG7 | · · | PG6 (LCD_D6) * (MOSI)PB15 | · · | PF11(BTN_EN2) (LCD_D5) PG3 | · · | PG2 (LCD_D4) * (SD_SS)PB12 | · · | PG10(BTN_EN1) (LCD_RS) PD10 | · · | PD11 (LCD_EN) * (SCK)PB13 | · · | PB14(MISO) (BTN_ENC) PA8 | · · | PG4 (BEEPER) - * ￣￣ ￣￣ + * ----- ----- * EXP2 EXP1 */ // // LCDs and Controllers // -#if HAS_SPI_LCD +#if IS_TFTGLCD_PANEL + + #if ENABLED(TFTGLCD_PANEL_SPI) + #define TFTGLCD_CS PG10 + #endif + +#elif HAS_WIRED_LCD + #define BEEPER_PIN PG4 #define BTN_ENC PA8 #if ENABLED(CR10_STOCKDISPLAY) + #define LCD_PINS_RS PG6 #define BTN_EN1 PD11 @@ -301,10 +313,12 @@ #undef BOARD_ST7920_DELAY_3 #elif ENABLED(MKS_MINI_12864) + #define DOGLCD_A0 PG6 #define DOGLCD_CS PG3 #define BTN_EN1 PG10 #define BTN_EN2 PF11 + #else #define LCD_PINS_RS PD10 @@ -343,32 +357,32 @@ #endif - // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD - #ifndef BOARD_ST7920_DELAY_1 - #define BOARD_ST7920_DELAY_1 DELAY_NS(96) - #endif - #ifndef BOARD_ST7920_DELAY_2 - #define BOARD_ST7920_DELAY_2 DELAY_NS(48) - #endif - #ifndef BOARD_ST7920_DELAY_3 - #define BOARD_ST7920_DELAY_3 DELAY_NS(600) - #endif - #endif +#endif // HAS_WIRED_LCD -#endif // HAS_SPI_LCD +// Alter timing for graphical display +#if HAS_MARLINUI_U8GLIB + #ifndef BOARD_ST7920_DELAY_1 + #define BOARD_ST7920_DELAY_1 DELAY_NS(96) + #endif + #ifndef BOARD_ST7920_DELAY_2 + #define BOARD_ST7920_DELAY_2 DELAY_NS(48) + #endif + #ifndef BOARD_ST7920_DELAY_3 + #define BOARD_ST7920_DELAY_3 DELAY_NS(600) + #endif +#endif // // WIFI // /** - * _____ + * ----- * TX | 1 2 | GND Enable PG1 // Must be high for module to run * Enable | 3 4 | GPIO2 Reset PG0 // active low, probably OK to leave floating * Reset | 5 6 | GPIO0 GPIO2 PF15 // must be high (ESP3D software configures this with a pullup so OK to leave as floating) - * 3.3V| 7 8 | RX GPIO0 PF14 // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) - * ￣￣ + * 3.3V | 7 8 | RX GPIO0 PF14 // Leave as unused (ESP3D software configures this with a pullup so OK to leave as floating) + * ----- * W1 */ #define ESP_WIFI_MODULE_COM 6 // Must also set either SERIAL_PORT or SERIAL_PORT_2 to this diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h index a6d7f8a495ad..151f6c3bc06e 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6.h @@ -199,7 +199,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BEEPER_PIN PC9 #define BTN_ENC PA8 @@ -261,7 +261,7 @@ #endif // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif @@ -273,7 +273,7 @@ #endif #endif -#endif // HAS_SPI_LCD +#endif // HAS_WIRED_LCD #ifndef RGB_LED_R_PIN #define RGB_LED_R_PIN PB6 diff --git a/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h b/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h index 6cd970501fde..021ef1d5f6b8 100644 --- a/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h +++ b/Marlin/src/pins/stm32f4/pins_FYSETC_S6_V2_0.h @@ -16,7 +16,7 @@ * GNU General Public License for more details. * * You should have received a copy of the GNU General Public License - * along with this program. If not, see . + * along with this program. If not, see . * */ #pragma once diff --git a/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h b/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h index ae469365a996..4acfd743b756 100644 --- a/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h +++ b/Marlin/src/pins/stm32f4/pins_GENERIC_STM32F4.h @@ -184,7 +184,7 @@ // // ST7920 Delays // -#if HAS_GRAPHICAL_LCD +#if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif diff --git a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h index 338fda1e53a1..d52bb11d1206 100644 --- a/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h +++ b/Marlin/src/pins/stm32f4/pins_RUMBA32_common.h @@ -23,7 +23,6 @@ /** * Common pin assignments for all RUMBA32 boards - * */ #if NOT_TARGET(STM32F4) @@ -147,7 +146,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define BTN_EN1 PB2 #define BTN_EN2 PB1 @@ -169,7 +168,7 @@ #endif // Alter timing for graphical display - #if HAS_GRAPHICAL_LCD + #if HAS_MARLINUI_U8GLIB #ifndef BOARD_ST7920_DELAY_1 #define BOARD_ST7920_DELAY_1 DELAY_NS(96) #endif diff --git a/Marlin/src/pins/stm32f4/pins_VAKE403D.h b/Marlin/src/pins/stm32f4/pins_VAKE403D.h index 6c826b068d24..e2463fd47e6f 100644 --- a/Marlin/src/pins/stm32f4/pins_VAKE403D.h +++ b/Marlin/src/pins/stm32f4/pins_VAKE403D.h @@ -165,7 +165,7 @@ // // LCD / Controller // -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #if ENABLED(SDSUPPORT) #define SDSS PB6 // CS for SD card in LCD #endif diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h index 3fb8c7f2593b..6ffd35dff273 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -201,7 +201,7 @@ // //#define USE_INTERNAL_SD -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 9 // E1 JP11-11 #define LCD_PINS_ENABLE 8 // E0 JP11-10 #define LCD_PINS_D4 7 // D7 JP11-8 diff --git a/Marlin/src/pins/teensy2/pins_TEENSYLU.h b/Marlin/src/pins/teensy2/pins_TEENSYLU.h index 09bbeebdd8c3..9de119b62b4a 100644 --- a/Marlin/src/pins/teensy2/pins_TEENSYLU.h +++ b/Marlin/src/pins/teensy2/pins_TEENSYLU.h @@ -17,7 +17,6 @@ * * You should have received a copy of the GNU General Public License * along with this program. If not, see . - * */ /** diff --git a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h index b98c78fde1d3..0edb5cb19dbd 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY31_32.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY31_32.h @@ -27,7 +27,7 @@ * https://www.pjrc.com/teensy/teensyduino.html */ -#if NOT_TARGET(IS_32BIT_TEENSY) +#if NOT_TARGET(IS_TEENSY_31_32) #error "Oops! Select 'Teensy 3.1' or 'Teensy 3.2' in 'Tools > Board.'" #endif @@ -98,7 +98,7 @@ // /* -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 41 #define LCD_PINS_D4 42 diff --git a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h index 961dc0cff03f..2e09c8a425ca 100644 --- a/Marlin/src/pins/teensy3/pins_TEENSY35_36.h +++ b/Marlin/src/pins/teensy3/pins_TEENSY35_36.h @@ -27,7 +27,7 @@ * https://www.pjrc.com/teensy/teensyduino.html ****************************************************************************************/ -#if NOT_TARGET(IS_32BIT_TEENSY) +#if NOT_TARGET(IS_TEENSY_35_36) #error "Oops! Select 'Teensy 3.5' or 'Teensy 3.6' in 'Tools > Board.'" #endif @@ -130,7 +130,7 @@ // #define SDSS 39 // 8 -#if HAS_SPI_LCD +#if HAS_WIRED_LCD #define LCD_PINS_RS 40 #define LCD_PINS_ENABLE 41 #define LCD_PINS_D4 42 diff --git a/Marlin/src/pins/teensy4/pins_T41U5XBB.h b/Marlin/src/pins/teensy4/pins_T41U5XBB.h index cb4c0ea879bf..830637bebd93 100644 --- a/Marlin/src/pins/teensy4/pins_T41U5XBB.h +++ b/Marlin/src/pins/teensy4/pins_T41U5XBB.h @@ -27,12 +27,12 @@ * https://www.pjrc.com/teensy/teensyduino.html ****************************************************************************************/ -#if NOT_TARGET(IS_32BIT_TEENSY) || NOT_TARGET(IS_TEENSY41) +#if NOT_TARGET(IS_TEENSY41) #error "Oops! Select 'Teensy 4.1' in 'Tools > Board.'" -#else - #define BOARD_INFO_NAME "Teensy4.1" #endif +#define BOARD_INFO_NAME "Teensy4.1" + /** * Plan for Teensy 4.0 and Teensy 4.1: * USB diff --git a/Marlin/src/pins/teensy4/pins_TEENSY41.h b/Marlin/src/pins/teensy4/pins_TEENSY41.h index cc7341bc2326..31c6fda5c900 100644 --- a/Marlin/src/pins/teensy4/pins_TEENSY41.h +++ b/Marlin/src/pins/teensy4/pins_TEENSY41.h @@ -27,12 +27,12 @@ * https://www.pjrc.com/teensy/teensyduino.html ****************************************************************************************/ -#if NOT_TARGET(IS_32BIT_TEENSY) || NOT_TARGET(IS_TEENSY41) +#if NOT_TARGET(IS_TEENSY41) #error "Oops! Select 'Teensy 4.1' in 'Tools > Board.'" -#else - #define BOARD_INFO_NAME "Teensy4.1" #endif +#define BOARD_INFO_NAME "Teensy4.1" + /** * Plan for Teensy 4.0 and Teensy 4.1: * USB diff --git a/Marlin/src/sd/Sd2Card.cpp b/Marlin/src/sd/Sd2Card.cpp index 6ff2793e93df..491c0692c72f 100644 --- a/Marlin/src/sd/Sd2Card.cpp +++ b/Marlin/src/sd/Sd2Card.cpp @@ -231,6 +231,13 @@ bool Sd2Card::eraseSingleBlockEnable() { * The reason for failure can be determined by calling errorCode() and errorData(). */ bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) { + #if IS_TEENSY_35_36 || IS_TEENSY_40_41 + chipSelectPin_ = BUILTIN_SDCARD; + const uint8_t ret = SDHC_CardInit(); + type_ = SDHC_CardGetType(); + return (ret == 0); + #endif + errorCode_ = type_ = 0; chipSelectPin_ = chipSelectPin; // 16-bit init start time allows over a minute @@ -332,6 +339,10 @@ bool Sd2Card::init(const uint8_t sckRateID, const pin_t chipSelectPin) { * \return true for success, false for failure. */ bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) { + #if IS_TEENSY_35_36 || IS_TEENSY_40_41 + return 0 == SDHC_CardReadBlock(dst, blockNumber); + #endif + if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card #if ENABLED(SD_CHECK_AND_RETRY) @@ -547,6 +558,10 @@ bool Sd2Card::waitNotBusy(const millis_t timeout_ms) { bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) { if (ENABLED(SDCARD_READONLY)) return false; + #if IS_TEENSY_35_36 || IS_TEENSY_40_41 + return 0 == SDHC_CardWriteBlock(src, blockNumber); + #endif + bool success = false; if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card if (!cardCommand(CMD24, blockNumber)) { diff --git a/Marlin/src/sd/Sd2Card.h b/Marlin/src/sd/Sd2Card.h index da19283ef1ec..6900502e03e9 100644 --- a/Marlin/src/sd/Sd2Card.h +++ b/Marlin/src/sd/Sd2Card.h @@ -78,13 +78,16 @@ uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1 SD_CARD_TYPE_SDHC = 3; // High Capacity SD card /** - * define SOFTWARE_SPI to use bit-bang SPI + * Define SOFTWARE_SPI to use bit-bang SPI */ -#if MEGA_SOFT_SPI +#if EITHER(MEGA_SOFT_SPI, USE_SOFTWARE_SPI) #define SOFTWARE_SPI -#elif USE_SOFTWARE_SPI - #define SOFTWARE_SPI -#endif // MEGA_SOFT_SPI +#endif + +#if IS_TEENSY_35_36 || IS_TEENSY_40_41 + #include "NXP_SDHC.h" + #define BUILTIN_SDCARD 254 +#endif /** * \class Sd2Card diff --git a/Marlin/src/sd/SdBaseFile.cpp b/Marlin/src/sd/SdBaseFile.cpp index 98d762f10b6a..2bc9f96e8c92 100644 --- a/Marlin/src/sd/SdBaseFile.cpp +++ b/Marlin/src/sd/SdBaseFile.cpp @@ -154,7 +154,6 @@ bool SdBaseFile::contiguousRange(uint32_t* bgnBlock, uint32_t* endBlock) { * an invalid DOS 8.3 file name, the FAT volume has not been initialized, * a file is already open, the file already exists, the root * directory is full or an I/O error. - * */ bool SdBaseFile::createContiguous(SdBaseFile* dirFile, const char* path, uint32_t size) { if (ENABLED(SDCARD_READONLY)) return false; @@ -1663,7 +1662,6 @@ bool SdBaseFile::truncate(uint32_t length) { * \a nbyte. If an error occurs, write() returns -1. Possible errors * include write() is called before a file has been opened, write is called * for a read-only file, device is full, a corrupt file system or an I/O error. - * */ int16_t SdBaseFile::write(const void* buf, uint16_t nbyte) { #if ENABLED(SDCARD_READONLY) diff --git a/Marlin/src/sd/SdFatStructs.h b/Marlin/src/sd/SdFatStructs.h index e06e05981ad2..484d4e50c6c9 100644 --- a/Marlin/src/sd/SdFatStructs.h +++ b/Marlin/src/sd/SdFatStructs.h @@ -128,7 +128,6 @@ typedef struct masterBootRecord mbr_t; * \struct fat_boot * * \brief Boot sector for a FAT12/FAT16 volume. - * */ struct fat_boot { /** @@ -409,7 +408,6 @@ uint32_t const FSINFO_LEAD_SIG = 0x41615252, // 'AaRR' Lead signature for a F * \struct fat32_fsinfo * * \brief FSINFO sector for a FAT32 volume. - * */ struct fat32_fsinfo { uint32_t leadSignature; // must be 0x52, 0x52, 0x61, 0x41 'RRaA' diff --git a/Marlin/src/sd/SdFile.cpp b/Marlin/src/sd/SdFile.cpp index a4f048d9502c..c82fe2c5ed77 100644 --- a/Marlin/src/sd/SdFile.cpp +++ b/Marlin/src/sd/SdFile.cpp @@ -57,7 +57,6 @@ SdFile::SdFile(const char* path, uint8_t oflag) : SdBaseFile(path, oflag) { } * \a nbyte. If an error occurs, write() returns -1. Possible errors * include write() is called before a file has been opened, write is called * for a read-only file, device is full, a corrupt file system or an I/O error. - * */ int16_t SdFile::write(const void* buf, uint16_t nbyte) { return SdBaseFile::write(buf, nbyte); } diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp index 37af4a368846..e154ea9f314b 100644 --- a/Marlin/src/sd/cardreader.cpp +++ b/Marlin/src/sd/cardreader.cpp @@ -55,6 +55,7 @@ #define DEBUG_OUT EITHER(DEBUG_CARDREADER, MARLIN_DEV_MODE) #include "../core/debug_out.h" +#include "../libs/hex_print.h" // public: @@ -571,11 +572,11 @@ void CardReader::openFileRead(char * const path, const uint8_t subcall_type/*=0* endFilePrint(); - SdFile *curDir; - const char * const fname = diveToFile(true, curDir, path); + SdFile *diveDir; + const char * const fname = diveToFile(true, diveDir, path); if (!fname) return; - if (file.open(curDir, fname, O_READ)) { + if (file.open(diveDir, fname, O_READ)) { filesize = file.fileSize(); sdpos = 0; @@ -606,14 +607,14 @@ void CardReader::openFileWrite(char * const path) { endFilePrint(); - SdFile *curDir; - const char * const fname = diveToFile(false, curDir, path); + SdFile *diveDir; + const char * const fname = diveToFile(false, diveDir, path); if (!fname) return; #if ENABLED(SDCARD_READONLY) openFailed(fname); #else - if (file.open(curDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) { + if (file.open(diveDir, fname, O_CREAT | O_APPEND | O_WRITE | O_TRUNC)) { flag.saving = true; selectFileByName(fname); TERN_(EMERGENCY_PARSER, emergency_parser.disable()); @@ -625,6 +626,22 @@ void CardReader::openFileWrite(char * const path) { #endif } +// +// Check if a file exists by absolute or workDir-relative path +// If the file exists, the long name can also be fetched. +// +bool CardReader::fileExists(const char * const path) { + if (!isMounted()) return false; + SdFile *diveDir = nullptr; + const char * const fname = diveToFile(false, diveDir, path); + if (fname) { + diveDir->rewind(); + selectByName(*diveDir, fname); + diveDir->close(); + } + return fname != nullptr; +} + // // Delete a file by name in the working directory // @@ -770,13 +787,15 @@ uint16_t CardReader::countFilesInWorkDir() { /** * Dive to the given DOS 8.3 file path, with optional echo of the dive paths. * - * On exit, curDir contains an SdFile reference to the file's directory. + * On exit: + * - Your curDir pointer contains an SdFile reference to the file's directory. + * - If update_cwd was 'true' the workDir now points to the file's directory. * * Returns a pointer to the last segment (filename) of the given DOS 8.3 path. * * A nullptr result indicates an unrecoverable error. */ -const char* CardReader::diveToFile(const bool update_cwd, SdFile*& curDir, const char * const path, const bool echo/*=false*/) { +const char* CardReader::diveToFile(const bool update_cwd, SdFile*& diveDir, const char * const path, const bool echo/*=false*/) { // Track both parent and subfolder static SdFile newDir1, newDir2; SdFile *sub = &newDir1, *startDir; @@ -784,15 +803,21 @@ const char* CardReader::diveToFile(const bool update_cwd, SdFile*& curDir, const // Parsing the path string const char *item_name_adr = path; + DEBUG_ECHOLNPAIR("diveToFile: path = '", path, "'"); + if (path[0] == '/') { // Starting at the root directory? - curDir = &root; - if (update_cwd) workDirDepth = 0; // The cwd can be updated for the benefit of sub-programs + diveDir = &root; item_name_adr++; + DEBUG_ECHOLNPAIR("diveToFile: CWD to root: ", hex_address((void*)diveDir)); + if (update_cwd) workDirDepth = 0; // The cwd can be updated for the benefit of sub-programs } else - curDir = &workDir; // Dive from workDir (as set by the UI) + diveDir = &workDir; // Dive from workDir (as set by the UI) + + startDir = diveDir; + + DEBUG_ECHOLNPAIR("diveToFile: startDir = ", hex_address((void*)startDir)); - startDir = curDir; while (item_name_adr) { // Find next subdirectory delimiter char * const name_end = strchr(item_name_adr, '/'); @@ -808,30 +833,48 @@ const char* CardReader::diveToFile(const bool update_cwd, SdFile*& curDir, const if (echo) SERIAL_ECHOLN(dosSubdirname); - // Open curDir - if (!sub->open(curDir, dosSubdirname, O_READ)) { + DEBUG_ECHOLNPAIR("diveToFile: sub = ", hex_address((void*)sub)); + + // Open diveDir (closing first) + sub->close(); + if (!sub->open(diveDir, dosSubdirname, O_READ)) { openFailed(dosSubdirname); - return nullptr; + item_name_adr = nullptr; + break; } - // Close curDir if not at starting-point - if (curDir != startDir) curDir->close(); + // Close diveDir if not at starting-point + if (diveDir != startDir) { + DEBUG_ECHOLNPAIR("diveToFile: closing diveDir: ", hex_address((void*)diveDir)); + diveDir->close(); + } - // curDir now subDir - curDir = sub; + // diveDir now subDir + diveDir = sub; + DEBUG_ECHOLNPAIR("diveToFile: diveDir = sub: ", hex_address((void*)diveDir)); - // Update workDirParents, workDirDepth, and workDir + // Update workDirParents and workDirDepth if (update_cwd) { - if (workDirDepth < MAX_DIR_DEPTH) workDirParents[workDirDepth++] = *curDir; - workDir = *curDir; + DEBUG_ECHOLNPAIR("diveToFile: update_cwd"); + if (workDirDepth < MAX_DIR_DEPTH) + workDirParents[workDirDepth++] = *diveDir; } // Point sub at the other scratch object - sub = (curDir != &newDir1) ? &newDir1 : &newDir2; + sub = (diveDir != &newDir1) ? &newDir1 : &newDir2; + DEBUG_ECHOLNPAIR("diveToFile: swapping sub = ", hex_address((void*)sub)); // Next path atom address item_name_adr = name_end + 1; } + + if (update_cwd) { + workDir = *diveDir; + DEBUG_ECHOLNPAIR("diveToFile: final workDir = ", hex_address((void*)diveDir)); + flag.workDirIsRoot = (workDirDepth == 0); + TERN_(SDCARD_SORT_ALPHA, presort()); + } + return item_name_adr; } diff --git a/Marlin/src/sd/cardreader.h b/Marlin/src/sd/cardreader.h index 62a6d87acf69..33645b6531eb 100644 --- a/Marlin/src/sd/cardreader.h +++ b/Marlin/src/sd/cardreader.h @@ -99,6 +99,7 @@ class CardReader { static void openFileRead(char * const path, const uint8_t subcall=0); static void openFileWrite(char * const path); static void closefile(const bool store_location=false); + static bool fileExists(const char * const name); static void removeFile(const char * const name); static inline char* longest_filename() { return longFilename[0] ? longFilename : filename; } diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h index 55a1099a3a25..8ca95ba7061c 100644 --- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h +++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h @@ -30,19 +30,20 @@ #include "../SdInfo.h" /** - * define SOFTWARE_SPI to use bit-bang SPI + * Define SOFTWARE_SPI to use bit-bang SPI */ -#if MEGA_SOFT_SPI || USE_SOFTWARE_SPI +#if EITHER(MEGA_SOFT_SPI, USE_SOFTWARE_SPI) #define SOFTWARE_SPI #endif // SPI pin definitions - do not edit here - change in SdFatConfig.h -#if DISABLED(SOFTWARE_SPI) +#if ENABLED(SOFTWARE_SPI) + #warning "Auto-assigning '10' as the SD_CHIP_SELECT_PIN." + #define SD_CHIP_SELECT_PIN 10 // Software SPI chip select pin for the SD +#else // hardware pin defs #define SD_CHIP_SELECT_PIN SS_PIN // The default chip select pin for the SD card is SS. -#else // SOFTWARE_SPI - #define SD_CHIP_SELECT_PIN 10 // Software SPI chip select pin for the SD -#endif // SOFTWARE_SPI +#endif class Sd2Card { private: diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp index 8f0dbf42e957..8a989157b40a 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/Usb.cpp @@ -640,7 +640,6 @@ uint8_t USB::AttemptConfig(uint8_t driver, uint8_t parent, uint8_t port, bool lo * 7: for (each driver) { * 7a: Ask device if it knows this VID/PID. Acts exactly like 6a, but using VID/PID * 8: if we get here, no driver likes the device plugged in, so exit failure. - * */ uint8_t USB::Configuring(uint8_t parent, uint8_t port, bool lowspeed) { //uint8_t bAddress = 0; diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp index 8ead0b0093b6..d707a41a2702 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs2/masstorage.cpp @@ -828,7 +828,6 @@ uint8_t BulkOnly::ClearEpHalt(uint8_t index) { /** * For driver use only. - * */ void BulkOnly::Reset() { while (pUsb->ctrlReq(bAddress, 0, bmREQ_MASSOUT, MASS_REQ_BOMSR, 0, 0, bIface, 0, 0, nullptr, nullptr) == 0x01) delay(6); @@ -1163,7 +1162,6 @@ uint8_t BulkOnly::HandleSCSIError(uint8_t status) { //////////////////////////////////////////////////////////////////////////////// /** - * * @param ep_ptr */ void BulkOnly::PrintEndpointDescriptor(const USB_FD_ENDPOINT_DESCRIPTOR * ep_ptr) { diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h index 45830de9a162..15ed427697b6 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_BULK_STORAGE/UHS_BULK_STORAGE_INLINE.h @@ -318,7 +318,6 @@ UHS_NI UHS_Bulk_Storage::UHS_Bulk_Storage(UHS_USB_HOST_BASE *p) { } /** - * * @param ei Enumeration information * @return true if this interface driver can handle this interface description */ @@ -375,7 +374,6 @@ uint8_t UHS_NI UHS_Bulk_Storage::SetInterface(ENUMERATION_INFO *ei) { }; /** - * * @return 0 for success */ uint8_t UHS_NI UHS_Bulk_Storage::Start() { @@ -628,7 +626,6 @@ void UHS_NI UHS_Bulk_Storage::CheckMedia() { /** * For driver use only. - * */ void UHS_NI UHS_Bulk_Storage::Poll() { if((long)(millis() - qNextPollTime) >= 0L) { @@ -839,7 +836,6 @@ uint8_t UHS_NI UHS_Bulk_Storage::ClearEpHalt(uint8_t index) { /** * For driver use only. - * */ void UHS_NI UHS_Bulk_Storage::Reset() { if(!bAddress) return; @@ -1185,7 +1181,6 @@ uint8_t UHS_NI UHS_Bulk_Storage::HandleSCSIError(uint8_t status) { //////////////////////////////////////////////////////////////////////////////// /** - * * @param ep_ptr */ void UHS_NI UHS_Bulk_Storage::PrintEndpointDescriptor(const USB_FD_ENDPOINT_DESCRIPTOR * ep_ptr) { diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h index dec083390e3c..7843013b0442 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_host_INLINE.h @@ -101,7 +101,6 @@ uint8_t UHS_USB_HOST_BASE::setEpInfoEntry(uint8_t addr, uint8_t iface, uint8_t e * * @param maxep How many endpoints to initialize * @param device pointer to the device driver instance (this) - * */ void UHS_USB_HOST_BASE::DeviceDefaults(uint8_t maxep, UHS_USBInterface *interface) { @@ -208,7 +207,6 @@ uint8_t UHS_USB_HOST_BASE::doSoftReset(uint8_t parent, uint8_t port, uint8_t add * example of one of these documents, see page Five: * https://www.ftdichip.com/Support/Documents/TechnicalNotes/TN_113_Simplified%20Description%20of%20USB%20Device%20Enumeration.pdf * - * */ /** diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h index 625666170bca..b289a896efea 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/UHS_usbhost.h @@ -350,7 +350,6 @@ class UHS_USBInterface { /** * Executed before anything else in Release(). - * */ virtual void OnRelease() { return; @@ -403,7 +402,6 @@ class UHS_USBInterface { #if 0 /** - * * @return true if this interface is Vendor Specific. */ virtual bool IsVSI() { @@ -414,7 +412,6 @@ class UHS_USBInterface { #if 0 /** - * * Vendor Specific interface class. * This is used by a partner interface. * It can also be used to force-enumerate an interface that diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h index 114064044d17..0ac90f0df3a6 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/UHS_host/macro_logic.h @@ -6,7 +6,6 @@ * * To test: * gcc -DAJK_TEST_MACRO_LOGIC -E macro_logic.h - * */ #ifndef MACRO_LOGIC_H diff --git a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h index 5408a94ade70..f86054cad8a4 100644 --- a/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h +++ b/Marlin/src/sd/usb_flashdrive/lib-uhs3/dyn_SWI/SWI_INLINE.h @@ -165,7 +165,6 @@ static void Init_dyn_SWI() { } /** - * * @param klass class that extends dyn_SWI * @return 0 on queue full, else returns queue position (ones based) */ @@ -219,7 +218,6 @@ static void Init_dyn_SWI() { } /** - * * @param klass class that extends dyn_SWI * @return 0 on queue full, else returns queue position (ones based) */ diff --git a/README.md b/README.md index 839b9f3f6578..27becb9db6cb 100644 --- a/README.md +++ b/README.md @@ -100,8 +100,8 @@ Marlin 2.0 introduces a layer of abstraction so that all the existing high-level boards|processor|speed|flash|sram|logic|fpu ----|---------|-----|-----|----|-----|--- - [Teensy 4.0](https://www.pjrc.com/store/teensy40.html)|[IMXRT1062](https://www.mouser.com/new/nxp-semiconductors/nxp-imx-rt1060-crossover-processor/) ARM-Cortex M7|600MHz|1M|2M|3.3V|yes - [Teensy 4.1](https://www.pjrc.com/store/teensy41.html)|[IMXRT1062](https://www.mouser.com/new/nxp-semiconductors/nxp-imx-rt1060-crossover-processor/) ARM-Cortex M7|600MHz|1M|2M|3.3V|yes + [Teensy 4.0](https://www.pjrc.com/store/teensy40.html)|[IMXRT1062DVL6A](https://www.mouser.com/new/nxp-semiconductors/nxp-imx-rt1060-crossover-processor/) ARM-Cortex M7|600MHz|1M|2M|3.3V|yes + [Teensy 4.1](https://www.pjrc.com/store/teensy41.html)|[IMXRT1062DVJ6A](https://www.mouser.com/new/nxp-semiconductors/nxp-imx-rt1060-crossover-processor/) ARM-Cortex M7|600MHz|1M|2M|3.3V|yes ## Submitting Patches diff --git a/buildroot/share/PlatformIO/scripts/common-dependencies.h b/buildroot/share/PlatformIO/scripts/common-dependencies.h index 344dce9f13ab..02a4502e3fae 100644 --- a/buildroot/share/PlatformIO/scripts/common-dependencies.h +++ b/buildroot/share/PlatformIO/scripts/common-dependencies.h @@ -73,14 +73,10 @@ // Feature checks for SR_LCD_3W_NL #elif EITHER(LCD_I2C_TYPE_MCP23017, LCD_I2C_TYPE_MCP23008) #define USES_LIQUIDTWI2 -#elif ANY(HAS_CHARACTER_LCD, LCD_I2C_TYPE_PCF8575, LCD_I2C_TYPE_PCA8574, SR_LCD_2W_NL, LCM1602) +#elif ANY(HAS_MARLINUI_HD44780, LCD_I2C_TYPE_PCF8575, LCD_I2C_TYPE_PCA8574, SR_LCD_2W_NL, LCM1602) #define USES_LIQUIDCRYSTAL #endif -#if BOTH(ANYCUBIC_LCD_I3MEGA, EXTENSIBLE_UI) - #define HAS_ANYCUBIC_TFT_EXTUI -#endif - #if SAVED_POSITIONS #define HAS_SAVED_POSITIONS #endif diff --git a/buildroot/share/fonts/marlin-6x12-3.bdf b/buildroot/share/fonts/marlin-6x12-3.bdf index ef90656eba1b..bc7a8827c037 100644 --- a/buildroot/share/fonts/marlin-6x12-3.bdf +++ b/buildroot/share/fonts/marlin-6x12-3.bdf @@ -106,16 +106,15 @@ B8 ENDCHAR STARTCHAR uni0006 ENCODING 6 -SWIDTH 545 0 -DWIDTH 6 0 -BBX 5 6 0 1 +SWIDTH 504 0 +DWIDTH 7 0 +BBX 8 5 0 1 BITMAP -E0 -8C -EA -8C -8A -0A +D8 +6C +36 +6C +D8 ENDCHAR STARTCHAR uni0007 ENCODING 7 diff --git a/buildroot/share/git/mfinfo b/buildroot/share/git/mfinfo index c7bf04fb1471..e17138e45626 100755 --- a/buildroot/share/git/mfinfo +++ b/buildroot/share/git/mfinfo @@ -49,7 +49,8 @@ while [[ $# -gt 0 ]]; do done case "$REPO" in - Marlin ) TARG=bugfix-1.1.x ; [[ $INDEX == 2 ]] && TARG=bugfix-2.0.x ; [[ $INDEX == 3 ]] && TARG=dev-2.1.x ;; + Marlin ) TARG=bugfix-2.0.x ; [[ $INDEX == 1 ]] && TARG=bugfix-1.1.x ; [[ $INDEX == 3 ]] && TARG=dev-2.1.x ;; + Configurations ) TARG=import-2.0.x ;; MarlinDocumentation ) TARG=master ;; esac diff --git a/buildroot/share/git/mfrb b/buildroot/share/git/mfrb index 1edc99bbe928..071b0b3d5989 100755 --- a/buildroot/share/git/mfrb +++ b/buildroot/share/git/mfrb @@ -23,8 +23,5 @@ done [[ $USAGE == 1 ]] && { echo "usage: `basename $0` [1|2|3]" 1>&2 ; exit 1 ; } -# If the branch isn't currently the PR target -if [[ $TARG != $CURR ]]; then - [[ $QUICK ]] || git fetch upstream - git rebase upstream/$TARG && git rebase -i upstream/$TARG -fi +[[ $QUICK ]] || git fetch upstream +git rebase upstream/$TARG && git rebase -i upstream/$TARG diff --git a/buildroot/tests/LPC1769-tests b/buildroot/tests/LPC1769-tests index 9c7a1ba10e83..a7a6456d026d 100755 --- a/buildroot/tests/LPC1769-tests +++ b/buildroot/tests/LPC1769-tests @@ -26,6 +26,20 @@ opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \ opt_set GRID_MAX_POINTS_X 16 exec_test $1 $2 "Smoothieboard with many features" +restore_configs +opt_set MOTHERBOARD BOARD_SMOOTHIEBOARD +opt_set EXTRUDERS 2 +opt_set TEMP_SENSOR_1 -1 +opt_set TEMP_SENSOR_BED 5 +opt_enable TFTGLCD_PANEL_SPI SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \ + FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \ + BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET \ + PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \ + Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \ + LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER +opt_set GRID_MAX_POINTS_X 16 +exec_test $1 $2 "Smoothieboard with TFTGLCD_PANEL_SPI" + #restore_configs #opt_set MOTHERBOARD BOARD_AZTEEG_X5_MINI_WIFI #opt_enable COREYX USE_XMAX_PLUG DAC_MOTOR_CURRENT_DEFAULT \ diff --git a/config/README.md b/config/README.md index be986b7058a6..b5013627eace 100644 --- a/config/README.md +++ b/config/README.md @@ -1,3 +1,9 @@ # Where have all the configurations gone? +Marlin configurations for specific machines are now maintained in their own repository at: + +## https://github.com/MarlinFirmware/Configurations + +Configuration files for use with the nightly `bugfix-2.0.x` branch can be downloaded from: + ## https://github.com/MarlinFirmware/Configurations/archive/bugfix-2.0.x.zip diff --git a/platformio.ini b/platformio.ini index 5fd10866b6c9..15d801397179 100644 --- a/platformio.ini +++ b/platformio.ini @@ -26,7 +26,7 @@ include_dir = Marlin # [common] default_src_filter = + - - + - - - - - + - - - - - - - - - - - @@ -53,8 +53,8 @@ default_src_filter = + - - + - - - - - - - + - + - - - - - @@ -208,13 +208,15 @@ HAS_L64XX = Arduino-L6470@0.8.0 NEOPIXEL_LED = Adafruit NeoPixel@1.5.0 src_filter=+ MAX6675_IS_MAX31865 = Adafruit MAX31865 library@~1.1.0 -HAS_GRAPHICAL_LCD = U8glib-HAL@~0.4.1 - src_filter=+ USES_LIQUIDCRYSTAL = LiquidCrystal@1.5.0 USES_LIQUIDTWI2 = LiquidTWI2@1.2.7 -DWIN_CREALITY_LCD = src_filter=+ -HAS_CHARACTER_LCD = src_filter=+ +HAS_WIRED_LCD = src_filter=+ +HAS_MARLINUI_HD44780 = src_filter=+ +HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.1 + src_filter=+ HAS_GRAPHICAL_TFT = src_filter=+ +DWIN_CREALITY_LCD = src_filter=+ +IS_TFTGLCD_PANEL = src_filter=+ HAS_LCD_MENU = src_filter=+ HAS_GAMES = src_filter=+ MARLIN_BRICKOUT = src_filter=+ @@ -240,13 +242,12 @@ HAS_MENU_TEMPERATURE = src_filter=+ HAS_MENU_TMC = src_filter=+ HAS_MENU_TOUCH_SCREEN = src_filter=+ HAS_MENU_UBL = src_filter=+ -ANYCUBIC_LCD_I3MEGA = src_filter=+ +ANYCUBIC_LCD_CHIRON = src_filter=+ +ANYCUBIC_LCD_I3MEGA = src_filter=+ + HAS_DGUS_LCD = src_filter=+ + TOUCH_UI_FTDI_EVE = src_filter=+ -HAS_ANYCUBIC_TFT_EXTUI = src_filter=+ EXTUI_EXAMPLE = src_filter=+ MALYAN_LCD = src_filter=+ -HAS_SPI_LCD = src_filter=+ USB_FLASH_DRIVE_SUPPORT = src_filter=+ AUTO_BED_LEVELING_BILINEAR = src_filter=+ AUTO_BED_LEVELING_(3POINT|(BI)?LINEAR) = src_filter=+