WAL-G for PostgreSQL

You can use wal-g as a tool for making encrypted, compressed PostgreSQL backups (full and incremental) and push/fetch them to/from remote storages without saving it on your filesystem.

Configuration

WAL-G uses the usual PostgreSQL environment variables to configure its connection, especially including PGHOST, PGPORT, PGUSER, and PGPASSWORD/PGPASSFILE/~/.pgpass.

PGHOST can connect over a UNIX socket. This mode is preferred for localhost connections, set PGHOST=/var/run/postgresql to use it. WAL-G will connect over TCP if PGHOST is an IP address.

WALG_DISK_RATE_LIMIT

To configure disk read rate limit during backup-push in bytes per second.

Concurrency values can be configured using:

WALG_DOWNLOAD_CONCURRENCY

To configure how many goroutines to use during backup-fetch and wal-fetch, use WALG_DOWNLOAD_CONCURRENCY. By default, WAL-G uses the minimum of the number of files to extract and 10.

WALG_PREFETCH_DIR

By default WAL prefetch is storing prefetched data in pg_wal directory. This ensures that WAL can be easily moved from prefetch location to actual WAL consumption directory. But it may have negative consequences if you use it with pg_rewind in PostgreSQL 13. PostgreSQL 13 is able to invoke restore_command during pg_rewind. Prefetched WAL can generate false failure of pg_rewind. To avoid it you can either turn off prefetch during rewind (set WALG_DOWNLOAD_CONCURRENCY = 1) or place wal prefetch folder outside PGDATA. For details see this pgsql-hackers thread.

WALG_UPLOAD_CONCURRENCY

To configure how many concurrency streams to use during backup uploading, use WALG_UPLOAD_CONCURRENCY. By default, WAL-G uses 16 streams.

WALG_UPLOAD_DISK_CONCURRENCY

To configure how many concurrency streams are reading disk during backup-push. By default, WAL-G uses 1 stream.

TOTAL_BG_UPLOADED_LIMIT (e.g. 1024)

Overrides the default number of WAL files to upload during one scan. By default, at most 32 WAL files will be uploaded.

WALG_SENTINEL_USER_DATA

This setting allows backup automation tools to add extra information to JSON sentinel file during backup-push. This setting can be used e.g. to give user-defined names to backups. Note: UserData must be a valid JSON string.

WALG_PREVENT_WAL_OVERWRITE

If this setting is specified, during wal-push WAL-G will check the existence of WAL before uploading it. If the different file is already archived under the same name, WAL-G will return the non-zero exit code to prevent PostgreSQL from removing WAL.

WALG_DELTA_MAX_STEPS

Delta-backup is the difference between previously taken backup and present state. WALG_DELTA_MAX_STEPS determines how many delta backups can be between full backups. Defaults to 0. Restoration process will automatically fetch all necessary deltas and base backup and compose valid restored backup (you still need WALs after start of last backup to restore consistent cluster). Delta computation is based on ModTime of file system and LSN number of pages in datafiles.

WALG_DELTA_ORIGIN

To configure base for next delta backup (only if WALG_DELTA_MAX_STEPS is not exceeded). WALG_DELTA_ORIGIN can be LATEST (chaining increments), LATEST_FULL (for bases where volatile part is compact and chaining has no meaning - deltas overwrite each other). Defaults to LATEST.

WALG_TAR_SIZE_THRESHOLD

To configure the size of one backup bundle (in bytes). Smaller size causes granularity and more optimal, faster recovering. It also increases the number of storage requests, so it can costs you much money. Default size is 1 GB (1 << 30 - 1 bytes).

WALG_TAR_DISABLE_FSYNC

Disable calling fsync after writing files when extracting tar files.

WALG_PG_WAL_SIZE

To configure the wal segment size if different from the postgres default of 16 MB

WALG_UPLOAD_WAL_METADATA

To upload metadata related to wal files. WALG_UPLOAD_WAL_METADATA can be INDIVIDUAL (generates metadata for all the wal logs) or BULK( generates metadata for set of wal files) Sample metadata file (000000020000000300000071.json)

{
    "000000020000000300000071": {
    "created_time": "2021-02-23T00:51:14.195209969Z",
    "date_fmt": "%Y-%m-%dT%H:%M:%S.%fZ"
    }
}

If the parameter value is NOMETADATA or not specified, it will fallback to default setting (no wal metadata generation)

WALG_ALIVE_CHECK_INTERVAL

To control how frequently WAL-G will check if Postgres is alive during the backup-push. If the check fails, backup-push terminates.

Examples:

0 - disable the alive checks
1m - check every 1 minute (default value)
10s - check every 10 seconds
10m - check every 10 minutes

WALG_STOP_BACKUP_TIMEOUT

Timeout for the pg_stop_backup() call. By default, there is no timeout.

Examples:

0 - disable the timeout (default value)
10s - 10 seconds timeout
10m - 10 minutes timeout

Usage

`backup-fetch`

When fetching base backups, the user should pass in the name of the backup and a path to a directory to extract to. If this directory does not exist, WAL-G will create it and any intermediate subdirectories.

wal-g backup-fetch ~/extract/to/here example-backup

WAL-G can also fetch the latest backup using:

wal-g backup-fetch ~/extract/to/here LATEST

WAL-G can fetch the backup that has the specific UserData (stored in backup metadata) using the --target-user-data flag or WALG_FETCH_TARGET_USER_DATA variable:

wal-g backup-fetch /path --target-user-data "{ \"x\": [3], \"y\": 4 }"

Reverse delta unpack

Beta feature: WAL-G can unpack delta backups in reverse order to improve fetch efficiency.

To activate this feature, do one of the following:

set the WALG_USE_REVERSE_UNPACKenvironment variable
add the --reverse-unpack flag

wal-g backup-fetch /path LATEST --reverse-unpack

Redundant archives skipping

With reverse delta unpack turned on, you also can turn on redundant archives skipping. Since this feature involves both backup creation and restore process, in order to fully enable it you need to do two things:

Optional. Increases the chance of archive skipping, but may result in slower backup creation. Enable rating tar ball composer for backup-push.
Enable redundant backup archives skipping during backup-fetch. Do one of the following:
- set the WALG_USE_REVERSE_UNPACK and WALG_SKIP_REDUNDANT_TARS environment variables
- add the --reverse-unpack and --skip-redundant-tars flags

wal-g backup-fetch /path LATEST --reverse-unpack --skip-redundant-tars

Partial restore (experimental)

During partial restore wal-g restores only specified databases' files. Use 'database' or 'database/namespace.table' as a parameter ('public' namespace can be omitted).

wal-g backup-fetch /path LATEST --restore-only=my_database,"another database",database/my_table

Note: Double quotes are only needed to insert spaces and will be ignored

Example:

--restore-only=my_db,"another db"

is equivalent to

--restore-only=my_db,another" "db

or even

--restore-only=my_db,anoth"e"r" "d"b"

Require files metadata with database names data, which is automatically collected during local backup. With remote backup this option does not work.

Restores system databases and tables automatically.

Options --skip-redundant-tars and --reverse-unpack are set automatically.

Because of unrestored databases' or tables remains are still in system tables, it is recommended to drop them.

`backup-push`

When uploading backups to storage, the user should pass the Postgres data directory as an argument.

wal-g backup-push $PGDATA

WAL-G will check that command argument, environment variable PGDATA and config setting PGDATA are the same, if set.

If a backup is started from a standby sever, WAL-G will monitor the timeline of the server. If a promotion or timeline change occurs during the backup, the data will be uploaded but not finalized, and WAL-G will exit with an error. The logs will contain the necessary information to finalize the backup, which can then be used if you clearly understand the risks.

backup-push can also be run with the --permanent flag, which will mark the backup as permanent and prevent it from being removed when running delete.

Remote backup

WAL-G backup-push allows for two data streaming options:

Running directly on the database server as the postgres user, wal-g can read the database files from the filesystem. This option allows for high performance, and extra capabilities, such as partial restore or Delta backups.

For uploading backups to S3 using streaming option 1, the user should pass in the path containing the backup started by Postgres as in:
```
wal-g backup-push /backup/directory/path
```
Alternatively, WAL-G can stream the backup data through the postgres BASE_BACKUP protocol. This allows WAL-G to stream the backup data through the tcp layer, allows to run remote, and allows WAL-G to run as a separate linux user. WAL-G does require a database connection with replication privileges. Do note that the BASE_BACKUP protocol does not allow for multithreaded streaming, and that Delta backup currently is not implemented.

To stream the backup data, leave out the data directory. And to set the hostname of the postgres server, you can use the environment variable PGHOST, or the WAL-G argument --pghost.
```
# Inline
PGHOST=srv1 wal-g backup-push

# Export
export PGHOST=srv1
wal-g backup-push

# Use commandline option
wal-g backup-push --pghost srv1
```

The remote backup option can also be used to:

Run Postgres on multiple hosts (streaming replication), and backup with WAL-G using multihost configuration: wal-g backup-push --pghost srv1,srv2
Run Postgres on a windows host and backup with WAL-G on a linux host: PGHOST=winsrv1 wal-g backup-push
Schedule WAL-G as a Kubernetes CronJob

Rating composer mode

In the rating composer mode, WAL-G places files with similar updates frequencies in the same tarballs during backup creation. This should increase the effectiveness of backup-fetch redundant archives skipping. Be aware that although rating composer allows saving more data, it may result in slower backup creation compared to the default tarball composer.

To activate this feature, do one of the following:

set the WALG_USE_RATING_COMPOSERenvironment variable
add the --rating-composer flag

wal-g backup-push /path --rating-composer

Copy composer mode

In the copy composer mode, WAL-G makes a full backup and copies unchanged tar files from previous full backup. In case when there are no previous full backup, regular composer is used.

To activate this feature, do one of the following:

set the WALG_USE_COPY_COMPOSERenvironment variable
add the --copy-composer flag

wal-g backup-push /path --copy-composer

Database composer mode

In the database composer mode, WAL-G separated files from different directories inside default tablespace and packs them in different tars. Designed to increase partial restore performance.

To activate this feature, do one of the following:

set the WALG_USE_DATABASE_COMPOSER environment variable
add the --database-composer flag

wal-g backup-push /path --database-composer

Backup without metadata

By default, WAL-G tracks metadata of the backed up files. If millions of files are backed up (typically in case of hundreds of databases and thousands of tables in each database), tracking this metadata alone would require GBs of memory.

If --without-files-metadata or WALG_WITHOUT_FILES_METADATA is enabled, WAL-G does not track metadata of the files backed up. This significantly reduces the memory usage on instances with > 100k files.

Limitations

Cannot be used with rating-composer, copy-composer
Cannot be used with WALG_DELTA_MAX_STEPS setting or delta-from-user-data, delta-from-name flags.

To activate this feature, do one of the following:

set the WALG_WITHOUT_FILES_METADATAenvironment variable
add the --without-files-metadata flag

wal-g backup-push /path --without-files-metadata

Create delta backup from specific backup

When creating delta backup (WALG_DELTA_MAX_STEPS > 0), WAL-G uses the latest backup as the base by default. This behaviour can be changed via following flags:

--delta-from-name flag or WALG_DELTA_FROM_NAME environment variable to choose the backup with specified name as the base for the delta backup
--delta-from-user-data flag or WALG_DELTA_FROM_USER_DATA environment variable to choose the backup with specified user data as the base for the delta backup

Examples:

wal-g backup-push /path --delta-from-name base_000000010000000100000072_D_000000010000000100000063
wal-g backup-push /path --delta-from-user-data "{ \"x\": [3], \"y\": 4 }"

When using the above flags in combination with WALG_DELTA_ORIGIN setting, WALG_DELTA_ORIGIN logic applies to the specified backup. For example:

list of backups in storage:
base_000000010000000100000040  # full backup
base_000000010000000100000046_D_000000010000000100000040  # 1st delta
base_000000010000000100000061_D_000000010000000100000046  # 2nd delta
base_000000010000000100000070  # full backup

export WALG_DELTA_ORIGIN=LATEST_FULL
wal-g backup-push /path --delta-from-name base_000000010000000100000046_D_000000010000000100000040

wal-g logs:
INFO: Selecting the backup with name base_000000010000000100000046_D_000000010000000100000040 as the base for the current delta backup...
INFO: Delta will be made from full backup.
INFO: Delta backup from base_000000010000000100000040 with LSN 140000060.

Page checksums verification

To enable verification of the page checksums during the backup-push, use the --verify flag or set the WALG_VERIFY_PAGE_CHECKSUMS env variable. If found any, corrupted block numbers (currently no more than 10 of them) will be recorded to the backup sentinel json, for example:

...
"/base/13690/13535": {
"IsSkipped": true,
"MTime": "2020-08-20T21:02:56.690095409+05:00",
"IsIncremented": false
},
"/base/16384/16397": {
"CorruptBlocks": [
1
],
"IsIncremented": false,
"IsSkipped": false,
"MTime": "2020-08-21T19:09:52.966149937+05:00"
},
...

`wal-fetch`

When fetching WAL archives from S3, the user should pass in the archive name and the name of the file to download to. This file should not exist as WAL-G will create it for you.

WAL-G will also prefetch WAL files ahead of the asked WAL file. These files will be cached in ./.wal-g/prefetch directory. Cached files older than the recently asked WAL file will be deleted from the cache, to prevent cache bloating. If a cached file is requested with wal-fetch, this will also remove it from the cache, but trigger caching of the new file.

wal-g wal-fetch example-archive new-file-name

This command is intended to be executed from the Postgres restore_command parameter.

Note: wal-fetch will exit with errorcode 74 (EX_IOERR: input/output error, see sysexits.h for more info) if the WAL-file is not available in the repository. All other errors end in exit code 1, and should stop PostgreSQL rather than ending PostgreSQL recovery. For PostgreSQL that should be any error code between 126 and 255, which can be achieved with a simple wrapper script. Please see wal-g#1195 for more information.

`wal-push`

When uploading WAL archives to S3, the user should pass in the absolute path to where the archive is located.

wal-g wal-push /path/to/archive

This command is intended to be executed from the Postgres archive_command parameter.

`wal-show`

Show information about the WAL storage folder. wal-show shows all WAL segment timelines available in storage, displays the available backups for them, and checks them for missing segments.

if there are no gaps (missing segments) in the range, final status is OK
if there are some missing segments found, final status is LOST_SEGMENTS

wal-g wal-show

By default, wal-show shows available backups for each timeline. To turn it off, add the --without-backups flag.

By default, wal-show output is plaintext table. For detailed JSON output, add the --detailed-json flag.

`wal-verify`

Run series of checks to ensure that WAL segment storage is healthy. Available checks:

`integrity`

Ensure that there is a consistent WAL segment history for the cluster so WAL-G can perform a PITR for the backup. Essentially, it checks that all the WAL segments in the range [oldest backup start segment, current cluster segment) are available in storage. If no backups found, [1, current cluster segment) range will be scanned.

In integrity check output, there are four statuses of WAL segments:

FOUND segments are present in WAL storage
MISSING_DELAYED segments are not present in WAL storage, but probably Postgres did not try to archive them via archive_command yet
MISSING_UPLOADING segments are the segments which are not present in WAL storage, but looks like that they are in the process of uploading to storage
MISSING_LOST segments are not present in WAL storage and not MISSING_UPLOADING nor MISSING_DELAYED

ProbablyUploading segments range size is taken from WALG_UPLOAD_CONCURRENCY setting.

ProbablyDelayed segments range size is controlled via WALG_INTEGRITY_MAX_DELAYED_WALS setting.

Output consists of:

Status of integrity check:
- OK if there are no missing segments
- WARNING if there are some missing segments, but they are not MISSING_LOST
- FAILURE if there are some MISSING_LOST segments
A list that shows WAL segments in chronological order grouped by timeline and status.

`timeline`

Check if the current cluster timeline is greater than or equal to any of the storage WAL segments timelines. This check is useful to detect split-brain conflicts. Please note that this check works correctly only if new storage created, or the existing one cleaned when restoring from the backup or performing pg_upgrade.

Output consists of:

Status of timeline check:
- OK if current timeline id matches the highest timeline id found in storage
- WARNING if could not determine if current timeline matches the highest in storage
- FAILURE if current timeline id is not equal to the highest timeline id found in storage
Current timeline id.
The highest timeline id found in WAL storage folder.

Usage:

wal-g wal-verify [space separated list of checks]
# For example:
wal-g wal-verify integrity timeline # perform integrity and timeline checks
wal-g wal-verify integrity # perform only integrity check

By default, wal-verify output is plaintext. To enable JSON output, add the --json flag.

Example of the plaintext output:

[wal-verify] integrity check status: OK
[wal-verify] integrity check details:
+-----+--------------------------+--------------------------+----------------+--------+
| TLI | START                    | END                      | SEGMENTS COUNT | STATUS |
+-----+--------------------------+--------------------------+----------------+--------+
|   3 | 00000003000000030000004D | 0000000300000004000000F0 |            420 |  FOUND |
|   4 | 0000000400000004000000F1 | 000000040000000800000034 |            836 |  FOUND |
+-----+--------------------------+--------------------------+----------------+--------+
[wal-verify] timeline check status: OK
[wal-verify] timeline check details:
Highest timeline found in storage: 4
Current cluster timeline: 4

Example of the JSON output:

{
   "integrity":{
      "status":"OK",
      "details":[
         {
            "timeline_id":3,
            "start_segment":"00000003000000030000004D",
            "end_segment":"0000000300000004000000F0",
            "segments_count":420,
            "status":"FOUND"
         },
         {
            "timeline_id":4,
            "start_segment":"0000000400000004000000F1",
            "end_segment":"000000040000000800000034",
            "segments_count":836,
            "status":"FOUND"
         }
      ]
   },
   "timeline":{
      "status":"OK",
      "details":{
         "current_timeline_id":4,
         "highest_storage_timeline_id":4
      }
   }
}

`wal-receive`

Receive WAL stream using PostgreSQL streaming replication and push to the storage.

You can set WALG_SLOTNAME variable to define the replication slot name to be used (defaults to walg). The slot name can only consist of the following characters: [0-9A-Za-z_]. When uploading WAL archives to S3, the user should pass in the absolute path to where the archive is located.

wal-g wal-receive

`backup-mark`

Backups can be marked as permanent to prevent them from being removed when running delete. Backup permanence can be altered via this command by passing in the name of the backup (retrievable via wal-g backup-list --pretty --detail --json), which will mark the named backup and all previous related backups as permanent. The reverse is also possible by providing the -i flag.

wal-g backup-mark example-backup -i

`catchup-push`

To create a catchup incremental backup, the user should pass the path to the master Postgres directory and the LSN of the replica for which the backup is created.

Steps:

Stop replica
Get replica LSN (for example using pg_controldata command)
Start uploading incremental backup on master.

wal-g catchup-push /path/to/master/postgres --from-lsn replica_lsn

`catchup-fetch`

To accept catchup incremental backup created by catchup-push, the user should pass the path to the replica Postgres directory and name of the backup.

wal-g catchup-fetch /path/to/replica/postgres backup_name

`copy`

This command will help to change the storage and move the set of backups there or write the backups on magnetic tape. For example, wal-g copy --from=config_from.json --to=config_to.json will copy all backups.

Flags:

-b, --backup-name string Copy specific backup
-f, --from string Storage config from where should copy backup
-t, --to string Storage config to where should copy backup
-w, --without-history Copy backup without history (wal files)

`delete garbage`

Deletes outdated WAL archives and backups leftover files from storage, e.g. unsuccessfully backups or partially deleted ones. Will remove all non-permanent objects before the earliest non-permanent backup. This command is useful when backups are being deleted by the delete target command.

Usage:

wal-g delete garbage           # Deletes outdated WAL archives and leftover backups files from storage
wal-g delete garbage ARCHIVES      # Deletes only outdated WAL archives from storage
wal-g delete garbage BACKUPS       # Deletes only leftover (partially deleted or unsuccessful) backups files from storage

The garbage target can be used in addition to the other targets, which are common for all storages.

`wal-restore`

Restores the missing WAL segments that will be needed to perform pg_rewind from storage. The current version supports only local clusters.

Usage:

wal-g wal-restore path/to/target-pgdata path/to/source-pgdata

`daemon`

Archives and fetch all WAL segments in the background. Works with the PostgreSQL archive library walg_archive or walg-daemon-client.

Usage:

wal-g daemon path/to/socket-descriptor

pgBackRest backups support (beta version)

`pgbackrest backup-list`

List pgbackrest backups.

Usage:

wal-g pgbackrest backup-list [--pretty] [--json] [--detail]

`pgbackrest backup-fetch`

Fetch pgbackrest backup. For now works only with full backups, incr and diff backups are not supported.

Usage:

wal-g pgbackrest backup-fetch path/to/destination-directory backup-name

`pgbackrest wal-fetch`

Fetch wal file from pgbackrest backup

Usage:

wal-g pgbackrest wal-fetch example-archive new-file-name

`pgbackrest wal-show`

Show wal files from pgbackrest backup

Usage:

wal-g pgbackrest wal-show

Failover archive storages (experimental)

Switch to a failover storage for wal-push if primary storage becomes unavailable. This might be useful when the archiving fails during the cloud storage service unavailability to avoid out-of-disk-space issues. WAL-G will also take the failover storages into account during the wal-fetch / wal-prefetch.

WALG_FAILOVER_STORAGES:
    TEST_STORAGE:
        AWS_SECRET_ACCESS_KEY: "S3_STORAGE_KEY_1"
        AWS_ACCESS_KEY_ID: "S3_STORAGE_KEY_ID_1"
        WALE_S3_PREFIX: "s3://some-s3-storage-1/"
    STORAGE2:
        AWS_SECRET_ACCESS_KEY: "S3_STORAGE_KEY_2"
        AWS_ACCESS_KEY_ID: "S3_STORAGE_KEY_ID_2"
        WALE_S3_PREFIX: "s3://some-s3-storage-2/"
    FILE_STORAGE:
        WALG_FILE_PREFIX: "/some/prefix"

Please note that to use this feature WAL-G must be configured using a config file as it is impossible to put this nested structure to an environment variable.

WALG_FAILOVER_STORAGES_CHECK_TIMEOUT

WAL-G will use no more than seconds to check for available alive storages. Default value is 30s.

WALG_FAILOVER_STORAGES_CACHE_LIFETIME

WAL-G saves information about last used alive storage to disk to avoid excessive storage calls. This setting controls lifetime of this cache. Default value is 15m.

Playground

If you prefer to use a Docker image, you can directly test WAL-G with this playground.

Please note, that is a third-party repository, and we are not responsible for it to always work correctly.

Files

PostgreSQL.md

Latest commit

History

PostgreSQL.md

File metadata and controls

WAL-G for PostgreSQL

Configuration

Usage

backup-fetch

Reverse delta unpack

Redundant archives skipping

Partial restore (experimental)

backup-push

Remote backup

Rating composer mode

Copy composer mode

Database composer mode

Backup without metadata

Create delta backup from specific backup

Page checksums verification

wal-fetch

wal-push

wal-show

wal-verify

integrity

timeline

wal-receive

backup-mark

catchup-push

catchup-fetch

copy

delete garbage

wal-restore

daemon

pgBackRest backups support (beta version)

pgbackrest backup-list

pgbackrest backup-fetch

pgbackrest wal-fetch

pgbackrest wal-show

Failover archive storages (experimental)

Playground

`backup-fetch`

`backup-push`

`wal-fetch`

`wal-push`

`wal-show`

`wal-verify`

`integrity`

`timeline`

`wal-receive`

`backup-mark`

`catchup-push`

`catchup-fetch`

`copy`

`delete garbage`

`wal-restore`

`daemon`

`pgbackrest backup-list`

`pgbackrest backup-fetch`

`pgbackrest wal-fetch`

`pgbackrest wal-show`