PID Heart function parameters

[peibol90]

Hello there.

We come from this post in the Facebook group: https://www.facebook.com/share/p/tDafqh7QTJg5TUgt/

I was told that the "pushy" behavior that I observed on the PID response was intentional to fight with boredom. Using gym trainers from Lifefitness, they performed nicely keeping you at a constant heart rate (60% or 80% for weight loss and cardio training). I like this control because this helped me relaxing with other stuff, reading or watching tv series while pedaling.

I would like to know if there is any parameter I can customize by my own to reduce the oscillatory trend. Other thing that could be done is exposing PID parameters in the advanced settings section.

I will perform a step response ride in the following days to try to get my own PID tuning parameters.

[cagnulein]

Ok let's start adding a parameter removing the pushing thing, I guess it will solve your issue I will do in the next days Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno dom 3 nov 2024 alle 16:28 peibol90 ***@***.***> ha scritto:

…

Hello there. We come from this post in the Facebook group: https://www.facebook.com/share/p/tDafqh7QTJg5TUgt/ <http://url> I was told that the "pushy" behavior that I observed on the PID response was intentional to fight with boredom. Using gym trainers from Lifefitness, they performed nicely keeping you at a constant heart rate (60% or 80% for weight loss and cardio training). I like this control because this helped me relaxing with other stuff, reading or watching tv series while pedaling. I would like to know if there is any parameter I can customize by my own to reduce the oscillatory trend. Other thing that could be done is exposing PID parameters in the advanced settings section. I will perform a *step response ride* in the following days to try to get my own PID tuning parameters. — Reply to this email directly, view it on GitHub <#2731>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWDGT2AAFZRMQAYRIXTZ6Y6K5AVCNFSM6AAAAABRC2TQ2WVHI2DSMVQWIX3LMV43ERDJONRXK43TNFXW4OZXGQYTKMBTHE> . You are receiving this because you are subscribed to this thread.Message ID: ***@***.***>

[cagnulein]

@peibol90 are you on android or ios with qz?

[peibol90]

Android 13 TKQ1.221114.001
Xiaomi HyperOS 1.0.8.0.TKCEUXM
Poco X4 Pro 5G

[cagnulein]

ok perfect i will implement it asap Roberto Viola Software engineer and open source enthusiast http://robertoviola.cloud Il giorno lun 4 nov 2024 alle ore 12:37 peibol90 ***@***.***> ha scritto:

…

Android 13 TKQ1.221114.001 Xiaomi HyperOS 1.0.8.0.TKCEUXM Poco X4 Pro 5G — Reply to this email directly, view it on GitHub <#2731 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWBW53EWUERF4UPOHMLZ65L5XAVCNFSM6AAAAABRC2TQ2WVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJUGE3DCNI> . You are receiving this because you commented.Message ID: ***@***.*** com>

[cagnulein]

@peibol90 done https://github.com/cagnulein/qdomyos-zwift/actions/runs/11664419319

Google is very slow in these days, reviewing the app on the store, even the beta ones. For this reason, in order to check right now if the patch that I did is right, you can use the android build in the link (check at the bottom of the page in about 1 hour). In order to test it you need first to remove the current QZ version on your phone, install the one that you downloaded.
This version is a 15 minutes trial (you can restart it as many times as you want) and I can unlock it if you want, send me an email to [email protected] mentioning this ticket and that you are on android.

You have to disable the new setting PID Pushy in the trainprogram options

Let me know if you have any questions

[peibol90]

debug-Mon_Nov_4_21_31_19_2024.log
lun. nov. 4 21_38_46 2024.zip
I think this has worked nicely. A bit "rough" at the beginning but It has kept me in the zone (lower side). I have to do more testing. I didn't have more time today but I wanted to give you feedback. :) You are great, man🥇

[cagnulein]

Thanks for the feedback! Il giorno lun 4 nov 2024 alle 23:19 peibol90 ***@***.***> ha scritto:

…

debug-Mon_Nov_4_21_31_19_2024.log <https://github.com/user-attachments/files/17624439/debug-Mon_Nov_4_21_31_19_2024.log> lun. nov. 4 21_38_46 2024.zip <https://github.com/user-attachments/files/17624487/lun.nov.4.21_38_46.2024.zip> I think this has worked nicely. A bit "rough" at the beginning but It has kept me in the zone (lower side). I have to do more testing. I didn't have more time today but I wanted to give you feedback. :) You are great, man🥇 — Reply to this email directly, view it on GitHub <#2731 (reply in thread)>, or unsubscribe <https://github.com/notifications/unsubscribe-auth/AAALYWAS72T77P2LXIUCN6TZ67XHRAVCNFSM6AAAAABRC2TQ2WVHI2DSMVQWIX3LMV43URDJONRXK43TNFXW4Q3PNVWWK3TUHMYTCMJUG44TENA> . You are receiving this because you commented.Message ID: ***@***.*** com>