Skip to content

Latest commit

 

History

History
executable file
·
163 lines (118 loc) · 7.49 KB

doc_docker.md

File metadata and controls

executable file
·
163 lines (118 loc) · 7.49 KB
Raw

Using the docker image

A docker version of LibreSpeed is available here: GitHub Packages

Quickstart

If you just want to try it, the fastest way is:

docker run -p 80:80 -d --name speedtest --rm ghcr.io/librespeed/speedtest

Then go with your browser to port 80 of your server and try it out. If port 80 is already in use, adjust the first number in 80:80 above. Default is to run in standalone mode.

Docker Compose

In production environments we would recommend using docker-compose.

To start the container using docker compose the following docker-compose.yml configuration can be used:

version: '3.7'
services:
  speedtest:
    container_name: speedtest
    image: ghcr.io/librespeed/speedtest:latest
    restart: always
    environment:
      MODE: standalone
      #TITLE: "LibreSpeed"
      #TELEMETRY: "false"
      #ENABLE_ID_OBFUSCATION: "false"
      #REDACT_IP_ADDRESSES: "false"
      #PASSWORD:
      #EMAIL:
      #DISABLE_IPINFO: "false"
      #IPINFO_APIKEY: "your api key"
      #DISTANCE: "km"
      #WEBPORT: 80
    ports:
      - "80:80" # webport mapping (host:container)

Please adjust the environment variables according to the intended operating mode.

Standalone mode

If you want to install LibreSpeed on a single server, you need to configure it in standalone mode. To do this, set the MODE environment variable to standalone.

The test can be accessed on port 80.

Here's a list of additional environment variables available in this mode:

  • TITLE: Title of your speed test. Default value: LibreSpeed
  • TELEMETRY: Whether to enable telemetry or not. If enabled, you maybe want your data to be persisted. See below. Default value: false
  • ENABLE_ID_OBFUSCATION: When set to true with telemetry enabled, test IDs are obfuscated, to avoid exposing the database internal sequential IDs. Default value: false
  • REDACT_IP_ADDRESSES: When set to true with telemetry enabled, IP addresses and hostnames are redacted from the collected telemetry, for better privacy. Default value: false
  • DB_TYPE: When set to one of the supported DB-Backends it will use this instead of the default sqlite database backend. TELEMETRY has to be set to true. Also you have to create the database as described in doc.md. Supported backend types are:
    • sqlite - no additional settings required
    • mysql, postgresql - set additional env-variables:
      • DB_HOSTNAME - Name or IP of the DB server
      • DB_PORT (mysql only) - Port where DB is running
      • DB_NAME - Name of the telemetry db
      • DB_USERNAME, DB_PASSWORD - credentials of the user with read and update permissions to the db
    • mssql - not supported in docker image yet (feel free to open a PR with that, has to be done in entrypoint.sh)
  • PASSWORD: Password to access the stats page. If not set, stats page will not allow accesses.
  • EMAIL: Email address for GDPR requests. Must be specified when telemetry is enabled.
  • DISABLE_IPINFO: If set to true, ISP info and distance will not be fetched from either ipinfo.io or the offline database. Default: value: false
  • IPINFO_APIKEY: API key for ipinfo.io. Optional, but required if you want to use the full ipinfo.io APIs (required for distance measurement)
  • DISTANCE: When DISABLE_IPINFO is set to false, this specifies how the distance from the server is measured. Can be either km for kilometers, mi for miles, or an empty string to disable distance measurement. Requires an ipinfo.io API key. Default value: km
  • WEBPORT: Allows choosing a custom port for the included web server. Default value: 80. Note that you will have to expose it through docker with the -p argument. This is not the port where the service is exposed outside docker!

If telemetry is enabled, a stats page will be available at http://your.server/results/stats.php, but a password must be specified.

Persist sqlite database

Default DB driver is sqlite. The DB file is written to /database/db.sql.

So if you want your data to be persisted over image updates, you have to mount a volume with -v $PWD/db-dir:/database.

Example Standalone Mode with telemetry

This command starts LibreSpeed in standalone mode, with persisted telemetry, ID obfuscation and a stats password, on port 86:

docker run -e MODE=standalone -e TELEMETRY=true -e ENABLE_ID_OBFUSCATION=true -e PASSWORD="yourPasswordHere" -e WEBPORT=86 -p 86:86 -v $PWD/db-dir/:/database -it ghcr.io/librespeed/speedtest

Multiple Points of Test

For multiple servers, you need to set up 1+ LibreSpeed backends, and 1 LibreSpeed frontend.

Backend mode

In backend mode, LibreSpeed provides only a test point with no UI. To do this, set the MODE environment variable to backend.

The following backend files can be accessed on port 80: garbage.php, empty.php, getIP.php

Here's a list of additional environment variables available in this mode:

  • IPINFO_APIKEY: API key for ipinfo.io. Optional, but required if you want to use the full ipinfo.io APIs (required for distance measurement). If no API key is provided, the offline database will be used instead.

Example Backend mode

This command starts LibreSpeed in backend mode, with the default settings, on port 80:

docker run -e MODE=backend -p 80:80 -it ghcr.io/librespeed/speedtest

Frontend mode

In frontend mode, LibreSpeed serves clients the Web UI and a list of servers. To do this:

  • Set the MODE environment variable to frontend

  • Create a servers.json file with your test points. The syntax is the following:

    [
    {
        "name": "Friendly name for Server 1",
        "server" :"//server1.mydomain.com/",
        "dlURL" :"garbage.php",
        "ulURL" :"empty.php",
        "pingURL" :"empty.php",
        "getIpURL" :"getIP.php"
    },
    {
        "name": "Friendly name for Server 2",
        "server" :"https://server2.mydomain.com/",
        "dlURL" :"garbage.php",
        "ulURL" :"empty.php",
        "pingURL" :"empty.php",
        "getIpURL" :"getIP.php"
    },
    //...more servers...
]

    Note: if a server only supports HTTP or HTTPS, specify the protocol in the server field. If it supports both, just use //.

  • Mount this file to /servers.json in the container (example at the end of this file)

The test can be accessed on port 80.

The list of environment variables available in this mode is the same as above in standalone mode.

Example Frontend mode

This command starts LibreSpeed in frontend mode, with a given servers.json file, and with telemetry, ID obfuscation, and a stats password and a persistant sqlite database for results:

docker run -e MODE=frontend -e TELEMETRY=true -e ENABLE_ID_OBFUSCATION=true -e PASSWORD="yourPasswordHere" -v $PWD/servers.json:/servers.json -v $PWD/db-dir/:/database -p 80:80 -it ghcr.io/librespeed/speedtest

Dual mode

In dual mode, LibreSpeed operates as a standalone server that can also connect to other test points. To do this:

  • Set the MODE environment variable to dual
  • Follow the servers.json instructions for the frontend mode
  • The first server entry should be the local server, using the server endpoint address that a client can access.